ВЕРСИИ (339)

# MineLights 2.3.8.4 This release adds Forge configuration menus, refined settings across Minecraft versions, improved reliability of the mod update checker, and fixes issues with the config screen on NeoForge. Previous server version compatible (as of 2.3.1)! ## Key Features & Major Changes - Added Forge configuration menu support, including a built-in settings screen for older Forge versions. - Fixed MineLights settings failing to open on NeoForge 1.21.1 with Mod Menu ([#30](https://github.com/megabytesme/MineLights/issues/30)). - Updated settings menus to show features available in the current Minecraft version. - Fixed update notices being dropped when the Modrinth check finished before a world was joined. ## Installation / Upgrade Instructions - DELETE your old mine-lights-\*.jar file completely. - Download the jar from this release. - Place the new minelights-\*.jar into your mods folder. - Install Cloth Config, here: [https://modrinth.com/mod/cloth-config](https://modrinth.com/mod/cloth-config) - **OpenRGB (optional):** The latest OpenRGB version is recommended. After installing or updating OpenRGB, restart your computer before using MineLights. Start OpenRGB, open the **SDK Server** tab, and click **Start Server**. Keep OpenRGB running while Minecraft is open. MineLights connects to the local server at `127.0.0.1:6742` (the default SDK server address and port). - Run Minecraft. - Using anything which is not OpenRGB? 1. Start Minecraft. 2. Wait for MineLights.exe to finish downloading in the background. 3. If all goes well, you will see a dialog asking you if you want to grant `MineLights.exe` permission to access the internet. 4. After accepting, your supported devices will show red. ## Full Changelog & Technical Details - Added Forge config screen integration across supported releases, with a native screen on older versions that do not use Cloth Config. - Fixed the NeoForge config screen factory for the API signature used by NeoForge 1.21.1, resolving the `AbstractMethodError` reported in [issue #30](https://github.com/megabytesme/MineLights/issues/30). - Reworked legacy Forge settings with separate category tabs, page navigation that stays within the selected tab, and a dedicated About section. - Hid Locator Bar settings before Minecraft 26.1 and End Flash settings before Minecraft 1.21.9 in applicable configuration menus. - Queued Modrinth update notices until a player is available, across Fabric, Quilt, Forge, and NeoForge. - Updated older Fabric version detection and tick callback registration, including the Modrinth update check's Minecraft version lookup. - Corrected Fabric API and Java 8 build settings for Minecraft 1.14.3, and hardened Forge and NeoForge shutdown handling.

# MineLights 2.3.8.4 This release adds Forge configuration menus, refined settings across Minecraft versions, improved reliability of the mod update checker, and fixes issues with the config screen on NeoForge. Previous server version compatible (as of 2.3.1)! ## Key Features & Major Changes - Added Forge configuration menu support, including a built-in settings screen for older Forge versions. - Fixed MineLights settings failing to open on NeoForge 1.21.1 with Mod Menu ([#30](https://github.com/megabytesme/MineLights/issues/30)). - Updated settings menus to show features available in the current Minecraft version. - Fixed update notices being dropped when the Modrinth check finished before a world was joined. ## Installation / Upgrade Instructions - DELETE your old mine-lights-\*.jar file completely. - Download the jar from this release. - Place the new minelights-\*.jar into your mods folder. - Install Cloth Config, here: [https://modrinth.com/mod/cloth-config](https://modrinth.com/mod/cloth-config) - **OpenRGB (optional):** The latest OpenRGB version is recommended. After installing or updating OpenRGB, restart your computer before using MineLights. Start OpenRGB, open the **SDK Server** tab, and click **Start Server**. Keep OpenRGB running while Minecraft is open. MineLights connects to the local server at `127.0.0.1:6742` (the default SDK server address and port). - Run Minecraft. - Using anything which is not OpenRGB? 1. Start Minecraft. 2. Wait for MineLights.exe to finish downloading in the background. 3. If all goes well, you will see a dialog asking you if you want to grant `MineLights.exe` permission to access the internet. 4. After accepting, your supported devices will show red. ## Full Changelog & Technical Details - Added Forge config screen integration across supported releases, with a native screen on older versions that do not use Cloth Config. - Fixed the NeoForge config screen factory for the API signature used by NeoForge 1.21.1, resolving the `AbstractMethodError` reported in [issue #30](https://github.com/megabytesme/MineLights/issues/30). - Reworked legacy Forge settings with separate category tabs, page navigation that stays within the selected tab, and a dedicated About section. - Hid Locator Bar settings before Minecraft 26.1 and End Flash settings before Minecraft 1.21.9 in applicable configuration menus. - Queued Modrinth update notices until a player is available, across Fabric, Quilt, Forge, and NeoForge. - Updated older Fabric version detection and tick callback registration, including the Modrinth update check's Minecraft version lookup. - Corrected Fabric API and Java 8 build settings for Minecraft 1.14.3, and hardened Forge and NeoForge shutdown handling.

# MineLights 2.3.8.4 This release adds Forge configuration menus, refined settings across Minecraft versions, improved reliability of the mod update checker, and fixes issues with the config screen on NeoForge. Previous server version compatible (as of 2.3.1)! ## Key Features & Major Changes - Added Forge configuration menu support, including a built-in settings screen for older Forge versions. - Fixed MineLights settings failing to open on NeoForge 1.21.1 with Mod Menu ([#30](https://github.com/megabytesme/MineLights/issues/30)). - Updated settings menus to show features available in the current Minecraft version. - Fixed update notices being dropped when the Modrinth check finished before a world was joined. ## Installation / Upgrade Instructions - DELETE your old mine-lights-\*.jar file completely. - Download the jar from this release. - Place the new minelights-\*.jar into your mods folder. - Install Cloth Config, here: [https://modrinth.com/mod/cloth-config](https://modrinth.com/mod/cloth-config) - **OpenRGB (optional):** The latest OpenRGB version is recommended. After installing or updating OpenRGB, restart your computer before using MineLights. Start OpenRGB, open the **SDK Server** tab, and click **Start Server**. Keep OpenRGB running while Minecraft is open. MineLights connects to the local server at `127.0.0.1:6742` (the default SDK server address and port). - Run Minecraft. - Using anything which is not OpenRGB? 1. Start Minecraft. 2. Wait for MineLights.exe to finish downloading in the background. 3. If all goes well, you will see a dialog asking you if you want to grant `MineLights.exe` permission to access the internet. 4. After accepting, your supported devices will show red. ## Full Changelog & Technical Details - Added Forge config screen integration across supported releases, with a native screen on older versions that do not use Cloth Config. - Fixed the NeoForge config screen factory for the API signature used by NeoForge 1.21.1, resolving the `AbstractMethodError` reported in [issue #30](https://github.com/megabytesme/MineLights/issues/30). - Reworked legacy Forge settings with separate category tabs, page navigation that stays within the selected tab, and a dedicated About section. - Hid Locator Bar settings before Minecraft 26.1 and End Flash settings before Minecraft 1.21.9 in applicable configuration menus. - Queued Modrinth update notices until a player is available, across Fabric, Quilt, Forge, and NeoForge. - Updated older Fabric version detection and tick callback registration, including the Modrinth update check's Minecraft version lookup. - Corrected Fabric API and Java 8 build settings for Minecraft 1.14.3, and hardened Forge and NeoForge shutdown handling.

# MineLights 2.3.8.4 This release adds Forge configuration menus, refined settings across Minecraft versions, improved reliability of the mod update checker, and fixes issues with the config screen on NeoForge. Previous server version compatible (as of 2.3.1)! ## Key Features & Major Changes - Added Forge configuration menu support, including a built-in settings screen for older Forge versions. - Fixed MineLights settings failing to open on NeoForge 1.21.1 with Mod Menu ([#30](https://github.com/megabytesme/MineLights/issues/30)). - Updated settings menus to show features available in the current Minecraft version. - Fixed update notices being dropped when the Modrinth check finished before a world was joined. ## Installation / Upgrade Instructions - DELETE your old mine-lights-\*.jar file completely. - Download the jar from this release. - Place the new minelights-\*.jar into your mods folder. - Install Cloth Config, here: [https://modrinth.com/mod/cloth-config](https://modrinth.com/mod/cloth-config) - **OpenRGB (optional):** The latest OpenRGB version is recommended. After installing or updating OpenRGB, restart your computer before using MineLights. Start OpenRGB, open the **SDK Server** tab, and click **Start Server**. Keep OpenRGB running while Minecraft is open. MineLights connects to the local server at `127.0.0.1:6742` (the default SDK server address and port). - Run Minecraft. - Using anything which is not OpenRGB? 1. Start Minecraft. 2. Wait for MineLights.exe to finish downloading in the background. 3. If all goes well, you will see a dialog asking you if you want to grant `MineLights.exe` permission to access the internet. 4. After accepting, your supported devices will show red. ## Full Changelog & Technical Details - Added Forge config screen integration across supported releases, with a native screen on older versions that do not use Cloth Config. - Fixed the NeoForge config screen factory for the API signature used by NeoForge 1.21.1, resolving the `AbstractMethodError` reported in [issue #30](https://github.com/megabytesme/MineLights/issues/30). - Reworked legacy Forge settings with separate category tabs, page navigation that stays within the selected tab, and a dedicated About section. - Hid Locator Bar settings before Minecraft 26.1 and End Flash settings before Minecraft 1.21.9 in applicable configuration menus. - Queued Modrinth update notices until a player is available, across Fabric, Quilt, Forge, and NeoForge. - Updated older Fabric version detection and tick callback registration, including the Modrinth update check's Minecraft version lookup. - Corrected Fabric API and Java 8 build settings for Minecraft 1.14.3, and hardened Forge and NeoForge shutdown handling.

# MineLights 2.3.8.4 This release adds Forge configuration menus, refined settings across Minecraft versions, improved reliability of the mod update checker, and fixes issues with the config screen on NeoForge. Previous server version compatible (as of 2.3.1)! ## Key Features & Major Changes - Added Forge configuration menu support, including a built-in settings screen for older Forge versions. - Fixed MineLights settings failing to open on NeoForge 1.21.1 with Mod Menu ([#30](https://github.com/megabytesme/MineLights/issues/30)). - Updated settings menus to show features available in the current Minecraft version. - Fixed update notices being dropped when the Modrinth check finished before a world was joined. ## Installation / Upgrade Instructions - DELETE your old mine-lights-\*.jar file completely. - Download the jar from this release. - Place the new minelights-\*.jar into your mods folder. - Install Cloth Config, here: [https://modrinth.com/mod/cloth-config](https://modrinth.com/mod/cloth-config) - **OpenRGB (optional):** The latest OpenRGB version is recommended. After installing or updating OpenRGB, restart your computer before using MineLights. Start OpenRGB, open the **SDK Server** tab, and click **Start Server**. Keep OpenRGB running while Minecraft is open. MineLights connects to the local server at `127.0.0.1:6742` (the default SDK server address and port). - Run Minecraft. - Using anything which is not OpenRGB? 1. Start Minecraft. 2. Wait for MineLights.exe to finish downloading in the background. 3. If all goes well, you will see a dialog asking you if you want to grant `MineLights.exe` permission to access the internet. 4. After accepting, your supported devices will show red. ## Full Changelog & Technical Details - Added Forge config screen integration across supported releases, with a native screen on older versions that do not use Cloth Config. - Fixed the NeoForge config screen factory for the API signature used by NeoForge 1.21.1, resolving the `AbstractMethodError` reported in [issue #30](https://github.com/megabytesme/MineLights/issues/30). - Reworked legacy Forge settings with separate category tabs, page navigation that stays within the selected tab, and a dedicated About section. - Hid Locator Bar settings before Minecraft 26.1 and End Flash settings before Minecraft 1.21.9 in applicable configuration menus. - Queued Modrinth update notices until a player is available, across Fabric, Quilt, Forge, and NeoForge. - Updated older Fabric version detection and tick callback registration, including the Modrinth update check's Minecraft version lookup. - Corrected Fabric API and Java 8 build settings for Minecraft 1.14.3, and hardened Forge and NeoForge shutdown handling.

# MineLights 2.3.8.4 This release adds Forge configuration menus, refined settings across Minecraft versions, improved reliability of the mod update checker, and fixes issues with the config screen on NeoForge. Previous server version compatible (as of 2.3.1)! ## Key Features & Major Changes - Added Forge configuration menu support, including a built-in settings screen for older Forge versions. - Fixed MineLights settings failing to open on NeoForge 1.21.1 with Mod Menu ([#30](https://github.com/megabytesme/MineLights/issues/30)). - Updated settings menus to show features available in the current Minecraft version. - Fixed update notices being dropped when the Modrinth check finished before a world was joined. ## Installation / Upgrade Instructions - DELETE your old mine-lights-\*.jar file completely. - Download the jar from this release. - Place the new minelights-\*.jar into your mods folder. - Install Cloth Config, here: [https://modrinth.com/mod/cloth-config](https://modrinth.com/mod/cloth-config) - **OpenRGB (optional):** The latest OpenRGB version is recommended. After installing or updating OpenRGB, restart your computer before using MineLights. Start OpenRGB, open the **SDK Server** tab, and click **Start Server**. Keep OpenRGB running while Minecraft is open. MineLights connects to the local server at `127.0.0.1:6742` (the default SDK server address and port). - Run Minecraft. - Using anything which is not OpenRGB? 1. Start Minecraft. 2. Wait for MineLights.exe to finish downloading in the background. 3. If all goes well, you will see a dialog asking you if you want to grant `MineLights.exe` permission to access the internet. 4. After accepting, your supported devices will show red. ## Full Changelog & Technical Details - Added Forge config screen integration across supported releases, with a native screen on older versions that do not use Cloth Config. - Fixed the NeoForge config screen factory for the API signature used by NeoForge 1.21.1, resolving the `AbstractMethodError` reported in [issue #30](https://github.com/megabytesme/MineLights/issues/30). - Reworked legacy Forge settings with separate category tabs, page navigation that stays within the selected tab, and a dedicated About section. - Hid Locator Bar settings before Minecraft 26.1 and End Flash settings before Minecraft 1.21.9 in applicable configuration menus. - Queued Modrinth update notices until a player is available, across Fabric, Quilt, Forge, and NeoForge. - Updated older Fabric version detection and tick callback registration, including the Modrinth update check's Minecraft version lookup. - Corrected Fabric API and Java 8 build settings for Minecraft 1.14.3, and hardened Forge and NeoForge shutdown handling.

# MineLights 2.3.8.4 This release adds Forge configuration menus, refined settings across Minecraft versions, improved reliability of the mod update checker, and fixes issues with the config screen on NeoForge. Previous server version compatible (as of 2.3.1)! ## Key Features & Major Changes - Added Forge configuration menu support, including a built-in settings screen for older Forge versions. - Fixed MineLights settings failing to open on NeoForge 1.21.1 with Mod Menu ([#30](https://github.com/megabytesme/MineLights/issues/30)). - Updated settings menus to show features available in the current Minecraft version. - Fixed update notices being dropped when the Modrinth check finished before a world was joined. ## Installation / Upgrade Instructions - DELETE your old mine-lights-\*.jar file completely. - Download the jar from this release. - Place the new minelights-\*.jar into your mods folder. - Install Cloth Config, here: [https://modrinth.com/mod/cloth-config](https://modrinth.com/mod/cloth-config) - **OpenRGB (optional):** The latest OpenRGB version is recommended. After installing or updating OpenRGB, restart your computer before using MineLights. Start OpenRGB, open the **SDK Server** tab, and click **Start Server**. Keep OpenRGB running while Minecraft is open. MineLights connects to the local server at `127.0.0.1:6742` (the default SDK server address and port). - Run Minecraft. - Using anything which is not OpenRGB? 1. Start Minecraft. 2. Wait for MineLights.exe to finish downloading in the background. 3. If all goes well, you will see a dialog asking you if you want to grant `MineLights.exe` permission to access the internet. 4. After accepting, your supported devices will show red. ## Full Changelog & Technical Details - Added Forge config screen integration across supported releases, with a native screen on older versions that do not use Cloth Config. - Fixed the NeoForge config screen factory for the API signature used by NeoForge 1.21.1, resolving the `AbstractMethodError` reported in [issue #30](https://github.com/megabytesme/MineLights/issues/30). - Reworked legacy Forge settings with separate category tabs, page navigation that stays within the selected tab, and a dedicated About section. - Hid Locator Bar settings before Minecraft 26.1 and End Flash settings before Minecraft 1.21.9 in applicable configuration menus. - Queued Modrinth update notices until a player is available, across Fabric, Quilt, Forge, and NeoForge. - Updated older Fabric version detection and tick callback registration, including the Modrinth update check's Minecraft version lookup. - Corrected Fabric API and Java 8 build settings for Minecraft 1.14.3, and hardened Forge and NeoForge shutdown handling.

# MineLights 2.3.8.4 This release adds Forge configuration menus, refined settings across Minecraft versions, improved reliability of the mod update checker, and fixes issues with the config screen on NeoForge. Previous server version compatible (as of 2.3.1)! ## Key Features & Major Changes - Added Forge configuration menu support, including a built-in settings screen for older Forge versions. - Fixed MineLights settings failing to open on NeoForge 1.21.1 with Mod Menu ([#30](https://github.com/megabytesme/MineLights/issues/30)). - Updated settings menus to show features available in the current Minecraft version. - Fixed update notices being dropped when the Modrinth check finished before a world was joined. ## Installation / Upgrade Instructions - DELETE your old mine-lights-\*.jar file completely. - Download the jar from this release. - Place the new minelights-\*.jar into your mods folder. - Install Cloth Config, here: [https://modrinth.com/mod/cloth-config](https://modrinth.com/mod/cloth-config) - **OpenRGB (optional):** The latest OpenRGB version is recommended. After installing or updating OpenRGB, restart your computer before using MineLights. Start OpenRGB, open the **SDK Server** tab, and click **Start Server**. Keep OpenRGB running while Minecraft is open. MineLights connects to the local server at `127.0.0.1:6742` (the default SDK server address and port). - Run Minecraft. - Using anything which is not OpenRGB? 1. Start Minecraft. 2. Wait for MineLights.exe to finish downloading in the background. 3. If all goes well, you will see a dialog asking you if you want to grant `MineLights.exe` permission to access the internet. 4. After accepting, your supported devices will show red. ## Full Changelog & Technical Details - Added Forge config screen integration across supported releases, with a native screen on older versions that do not use Cloth Config. - Fixed the NeoForge config screen factory for the API signature used by NeoForge 1.21.1, resolving the `AbstractMethodError` reported in [issue #30](https://github.com/megabytesme/MineLights/issues/30). - Reworked legacy Forge settings with separate category tabs, page navigation that stays within the selected tab, and a dedicated About section. - Hid Locator Bar settings before Minecraft 26.1 and End Flash settings before Minecraft 1.21.9 in applicable configuration menus. - Queued Modrinth update notices until a player is available, across Fabric, Quilt, Forge, and NeoForge. - Updated older Fabric version detection and tick callback registration, including the Modrinth update check's Minecraft version lookup. - Corrected Fabric API and Java 8 build settings for Minecraft 1.14.3, and hardened Forge and NeoForge shutdown handling.

# MineLights 2.3.8.4 This release adds Forge configuration menus, refined settings across Minecraft versions, improved reliability of the mod update checker, and fixes issues with the config screen on NeoForge. Previous server version compatible (as of 2.3.1)! ## Key Features & Major Changes - Added Forge configuration menu support, including a built-in settings screen for older Forge versions. - Fixed MineLights settings failing to open on NeoForge 1.21.1 with Mod Menu ([#30](https://github.com/megabytesme/MineLights/issues/30)). - Updated settings menus to show features available in the current Minecraft version. - Fixed update notices being dropped when the Modrinth check finished before a world was joined. ## Installation / Upgrade Instructions - DELETE your old mine-lights-\*.jar file completely. - Download the jar from this release. - Place the new minelights-\*.jar into your mods folder. - Install Cloth Config, here: [https://modrinth.com/mod/cloth-config](https://modrinth.com/mod/cloth-config) - **OpenRGB (optional):** The latest OpenRGB version is recommended. After installing or updating OpenRGB, restart your computer before using MineLights. Start OpenRGB, open the **SDK Server** tab, and click **Start Server**. Keep OpenRGB running while Minecraft is open. MineLights connects to the local server at `127.0.0.1:6742` (the default SDK server address and port). - Run Minecraft. - Using anything which is not OpenRGB? 1. Start Minecraft. 2. Wait for MineLights.exe to finish downloading in the background. 3. If all goes well, you will see a dialog asking you if you want to grant `MineLights.exe` permission to access the internet. 4. After accepting, your supported devices will show red. ## Full Changelog & Technical Details - Added Forge config screen integration across supported releases, with a native screen on older versions that do not use Cloth Config. - Fixed the NeoForge config screen factory for the API signature used by NeoForge 1.21.1, resolving the `AbstractMethodError` reported in [issue #30](https://github.com/megabytesme/MineLights/issues/30). - Reworked legacy Forge settings with separate category tabs, page navigation that stays within the selected tab, and a dedicated About section. - Hid Locator Bar settings before Minecraft 26.1 and End Flash settings before Minecraft 1.21.9 in applicable configuration menus. - Queued Modrinth update notices until a player is available, across Fabric, Quilt, Forge, and NeoForge. - Updated older Fabric version detection and tick callback registration, including the Modrinth update check's Minecraft version lookup. - Corrected Fabric API and Java 8 build settings for Minecraft 1.14.3, and hardened Forge and NeoForge shutdown handling.

# MineLights 2.3.8.4 This release adds Forge configuration menus, refined settings across Minecraft versions, improved reliability of the mod update checker, and fixes issues with the config screen on NeoForge. Previous server version compatible (as of 2.3.1)! ## Key Features & Major Changes - Added Forge configuration menu support, including a built-in settings screen for older Forge versions. - Fixed MineLights settings failing to open on NeoForge 1.21.1 with Mod Menu ([#30](https://github.com/megabytesme/MineLights/issues/30)). - Updated settings menus to show features available in the current Minecraft version. - Fixed update notices being dropped when the Modrinth check finished before a world was joined. ## Installation / Upgrade Instructions - DELETE your old mine-lights-\*.jar file completely. - Download the jar from this release. - Place the new minelights-\*.jar into your mods folder. - Install Cloth Config, here: [https://modrinth.com/mod/cloth-config](https://modrinth.com/mod/cloth-config) - **OpenRGB (optional):** The latest OpenRGB version is recommended. After installing or updating OpenRGB, restart your computer before using MineLights. Start OpenRGB, open the **SDK Server** tab, and click **Start Server**. Keep OpenRGB running while Minecraft is open. MineLights connects to the local server at `127.0.0.1:6742` (the default SDK server address and port). - Run Minecraft. - Using anything which is not OpenRGB? 1. Start Minecraft. 2. Wait for MineLights.exe to finish downloading in the background. 3. If all goes well, you will see a dialog asking you if you want to grant `MineLights.exe` permission to access the internet. 4. After accepting, your supported devices will show red. ## Full Changelog & Technical Details - Added Forge config screen integration across supported releases, with a native screen on older versions that do not use Cloth Config. - Fixed the NeoForge config screen factory for the API signature used by NeoForge 1.21.1, resolving the `AbstractMethodError` reported in [issue #30](https://github.com/megabytesme/MineLights/issues/30). - Reworked legacy Forge settings with separate category tabs, page navigation that stays within the selected tab, and a dedicated About section. - Hid Locator Bar settings before Minecraft 26.1 and End Flash settings before Minecraft 1.21.9 in applicable configuration menus. - Queued Modrinth update notices until a player is available, across Fabric, Quilt, Forge, and NeoForge. - Updated older Fabric version detection and tick callback registration, including the Modrinth update check's Minecraft version lookup. - Corrected Fabric API and Java 8 build settings for Minecraft 1.14.3, and hardened Forge and NeoForge shutdown handling.

# MineLights 2.3.8.4 This release adds Forge configuration menus, refined settings across Minecraft versions, improved reliability of the mod update checker, and fixes issues with the config screen on NeoForge. Previous server version compatible (as of 2.3.1)! ## Key Features & Major Changes - Added Forge configuration menu support, including a built-in settings screen for older Forge versions. - Fixed MineLights settings failing to open on NeoForge 1.21.1 with Mod Menu ([#30](https://github.com/megabytesme/MineLights/issues/30)). - Updated settings menus to show features available in the current Minecraft version. - Fixed update notices being dropped when the Modrinth check finished before a world was joined. ## Installation / Upgrade Instructions - DELETE your old mine-lights-\*.jar file completely. - Download the jar from this release. - Place the new minelights-\*.jar into your mods folder. - Install Cloth Config, here: [https://modrinth.com/mod/cloth-config](https://modrinth.com/mod/cloth-config) - **OpenRGB (optional):** The latest OpenRGB version is recommended. After installing or updating OpenRGB, restart your computer before using MineLights. Start OpenRGB, open the **SDK Server** tab, and click **Start Server**. Keep OpenRGB running while Minecraft is open. MineLights connects to the local server at `127.0.0.1:6742` (the default SDK server address and port). - Run Minecraft. - Using anything which is not OpenRGB? 1. Start Minecraft. 2. Wait for MineLights.exe to finish downloading in the background. 3. If all goes well, you will see a dialog asking you if you want to grant `MineLights.exe` permission to access the internet. 4. After accepting, your supported devices will show red. ## Full Changelog & Technical Details - Added Forge config screen integration across supported releases, with a native screen on older versions that do not use Cloth Config. - Fixed the NeoForge config screen factory for the API signature used by NeoForge 1.21.1, resolving the `AbstractMethodError` reported in [issue #30](https://github.com/megabytesme/MineLights/issues/30). - Reworked legacy Forge settings with separate category tabs, page navigation that stays within the selected tab, and a dedicated About section. - Hid Locator Bar settings before Minecraft 26.1 and End Flash settings before Minecraft 1.21.9 in applicable configuration menus. - Queued Modrinth update notices until a player is available, across Fabric, Quilt, Forge, and NeoForge. - Updated older Fabric version detection and tick callback registration, including the Modrinth update check's Minecraft version lookup. - Corrected Fabric API and Java 8 build settings for Minecraft 1.14.3, and hardened Forge and NeoForge shutdown handling.

# MineLights 2.3.8.4 This release adds Forge configuration menus, refined settings across Minecraft versions, improved reliability of the mod update checker, and fixes issues with the config screen on NeoForge. Previous server version compatible (as of 2.3.1)! ## Key Features & Major Changes - Added Forge configuration menu support, including a built-in settings screen for older Forge versions. - Fixed MineLights settings failing to open on NeoForge 1.21.1 with Mod Menu ([#30](https://github.com/megabytesme/MineLights/issues/30)). - Updated settings menus to show features available in the current Minecraft version. - Fixed update notices being dropped when the Modrinth check finished before a world was joined. ## Installation / Upgrade Instructions - DELETE your old mine-lights-\*.jar file completely. - Download the jar from this release. - Place the new minelights-\*.jar into your mods folder. - Install Cloth Config, here: [https://modrinth.com/mod/cloth-config](https://modrinth.com/mod/cloth-config) - **OpenRGB (optional):** The latest OpenRGB version is recommended. After installing or updating OpenRGB, restart your computer before using MineLights. Start OpenRGB, open the **SDK Server** tab, and click **Start Server**. Keep OpenRGB running while Minecraft is open. MineLights connects to the local server at `127.0.0.1:6742` (the default SDK server address and port). - Run Minecraft. - Using anything which is not OpenRGB? 1. Start Minecraft. 2. Wait for MineLights.exe to finish downloading in the background. 3. If all goes well, you will see a dialog asking you if you want to grant `MineLights.exe` permission to access the internet. 4. After accepting, your supported devices will show red. ## Full Changelog & Technical Details - Added Forge config screen integration across supported releases, with a native screen on older versions that do not use Cloth Config. - Fixed the NeoForge config screen factory for the API signature used by NeoForge 1.21.1, resolving the `AbstractMethodError` reported in [issue #30](https://github.com/megabytesme/MineLights/issues/30). - Reworked legacy Forge settings with separate category tabs, page navigation that stays within the selected tab, and a dedicated About section. - Hid Locator Bar settings before Minecraft 26.1 and End Flash settings before Minecraft 1.21.9 in applicable configuration menus. - Queued Modrinth update notices until a player is available, across Fabric, Quilt, Forge, and NeoForge. - Updated older Fabric version detection and tick callback registration, including the Modrinth update check's Minecraft version lookup. - Corrected Fabric API and Java 8 build settings for Minecraft 1.14.3, and hardened Forge and NeoForge shutdown handling.

# MineLights 2.3.8.4 This release adds Forge configuration menus, refined settings across Minecraft versions, improved reliability of the mod update checker, and fixes issues with the config screen on NeoForge. Previous server version compatible (as of 2.3.1)! ## Key Features & Major Changes - Added Forge configuration menu support, including a built-in settings screen for older Forge versions. - Fixed MineLights settings failing to open on NeoForge 1.21.1 with Mod Menu ([#30](https://github.com/megabytesme/MineLights/issues/30)). - Updated settings menus to show features available in the current Minecraft version. - Fixed update notices being dropped when the Modrinth check finished before a world was joined. ## Installation / Upgrade Instructions - DELETE your old mine-lights-\*.jar file completely. - Download the jar from this release. - Place the new minelights-\*.jar into your mods folder. - Install Cloth Config, here: [https://modrinth.com/mod/cloth-config](https://modrinth.com/mod/cloth-config) - **OpenRGB (optional):** The latest OpenRGB version is recommended. After installing or updating OpenRGB, restart your computer before using MineLights. Start OpenRGB, open the **SDK Server** tab, and click **Start Server**. Keep OpenRGB running while Minecraft is open. MineLights connects to the local server at `127.0.0.1:6742` (the default SDK server address and port). - Run Minecraft. - Using anything which is not OpenRGB? 1. Start Minecraft. 2. Wait for MineLights.exe to finish downloading in the background. 3. If all goes well, you will see a dialog asking you if you want to grant `MineLights.exe` permission to access the internet. 4. After accepting, your supported devices will show red. ## Full Changelog & Technical Details - Added Forge config screen integration across supported releases, with a native screen on older versions that do not use Cloth Config. - Fixed the NeoForge config screen factory for the API signature used by NeoForge 1.21.1, resolving the `AbstractMethodError` reported in [issue #30](https://github.com/megabytesme/MineLights/issues/30). - Reworked legacy Forge settings with separate category tabs, page navigation that stays within the selected tab, and a dedicated About section. - Hid Locator Bar settings before Minecraft 26.1 and End Flash settings before Minecraft 1.21.9 in applicable configuration menus. - Queued Modrinth update notices until a player is available, across Fabric, Quilt, Forge, and NeoForge. - Updated older Fabric version detection and tick callback registration, including the Modrinth update check's Minecraft version lookup. - Corrected Fabric API and Java 8 build settings for Minecraft 1.14.3, and hardened Forge and NeoForge shutdown handling.

# MineLights 2.3.8.4 This release adds Forge configuration menus, refined settings across Minecraft versions, improved reliability of the mod update checker, and fixes issues with the config screen on NeoForge. Previous server version compatible (as of 2.3.1)! ## Key Features & Major Changes - Added Forge configuration menu support, including a built-in settings screen for older Forge versions. - Fixed MineLights settings failing to open on NeoForge 1.21.1 with Mod Menu ([#30](https://github.com/megabytesme/MineLights/issues/30)). - Updated settings menus to show features available in the current Minecraft version. - Fixed update notices being dropped when the Modrinth check finished before a world was joined. ## Installation / Upgrade Instructions - DELETE your old mine-lights-\*.jar file completely. - Download the jar from this release. - Place the new minelights-\*.jar into your mods folder. - Install Cloth Config, here: [https://modrinth.com/mod/cloth-config](https://modrinth.com/mod/cloth-config) - **OpenRGB (optional):** The latest OpenRGB version is recommended. After installing or updating OpenRGB, restart your computer before using MineLights. Start OpenRGB, open the **SDK Server** tab, and click **Start Server**. Keep OpenRGB running while Minecraft is open. MineLights connects to the local server at `127.0.0.1:6742` (the default SDK server address and port). - Run Minecraft. - Using anything which is not OpenRGB? 1. Start Minecraft. 2. Wait for MineLights.exe to finish downloading in the background. 3. If all goes well, you will see a dialog asking you if you want to grant `MineLights.exe` permission to access the internet. 4. After accepting, your supported devices will show red. ## Full Changelog & Technical Details - Added Forge config screen integration across supported releases, with a native screen on older versions that do not use Cloth Config. - Fixed the NeoForge config screen factory for the API signature used by NeoForge 1.21.1, resolving the `AbstractMethodError` reported in [issue #30](https://github.com/megabytesme/MineLights/issues/30). - Reworked legacy Forge settings with separate category tabs, page navigation that stays within the selected tab, and a dedicated About section. - Hid Locator Bar settings before Minecraft 26.1 and End Flash settings before Minecraft 1.21.9 in applicable configuration menus. - Queued Modrinth update notices until a player is available, across Fabric, Quilt, Forge, and NeoForge. - Updated older Fabric version detection and tick callback registration, including the Modrinth update check's Minecraft version lookup. - Corrected Fabric API and Java 8 build settings for Minecraft 1.14.3, and hardened Forge and NeoForge shutdown handling.

# MineLights 2.3.8.4 This release adds Forge configuration menus, refined settings across Minecraft versions, improved reliability of the mod update checker, and fixes issues with the config screen on NeoForge. Previous server version compatible (as of 2.3.1)! ## Key Features & Major Changes - Added Forge configuration menu support, including a built-in settings screen for older Forge versions. - Fixed MineLights settings failing to open on NeoForge 1.21.1 with Mod Menu ([#30](https://github.com/megabytesme/MineLights/issues/30)). - Updated settings menus to show features available in the current Minecraft version. - Fixed update notices being dropped when the Modrinth check finished before a world was joined. ## Installation / Upgrade Instructions - DELETE your old mine-lights-\*.jar file completely. - Download the jar from this release. - Place the new minelights-\*.jar into your mods folder. - Install Cloth Config, here: [https://modrinth.com/mod/cloth-config](https://modrinth.com/mod/cloth-config) - **OpenRGB (optional):** The latest OpenRGB version is recommended. After installing or updating OpenRGB, restart your computer before using MineLights. Start OpenRGB, open the **SDK Server** tab, and click **Start Server**. Keep OpenRGB running while Minecraft is open. MineLights connects to the local server at `127.0.0.1:6742` (the default SDK server address and port). - Run Minecraft. - Using anything which is not OpenRGB? 1. Start Minecraft. 2. Wait for MineLights.exe to finish downloading in the background. 3. If all goes well, you will see a dialog asking you if you want to grant `MineLights.exe` permission to access the internet. 4. After accepting, your supported devices will show red. ## Full Changelog & Technical Details - Added Forge config screen integration across supported releases, with a native screen on older versions that do not use Cloth Config. - Fixed the NeoForge config screen factory for the API signature used by NeoForge 1.21.1, resolving the `AbstractMethodError` reported in [issue #30](https://github.com/megabytesme/MineLights/issues/30). - Reworked legacy Forge settings with separate category tabs, page navigation that stays within the selected tab, and a dedicated About section. - Hid Locator Bar settings before Minecraft 26.1 and End Flash settings before Minecraft 1.21.9 in applicable configuration menus. - Queued Modrinth update notices until a player is available, across Fabric, Quilt, Forge, and NeoForge. - Updated older Fabric version detection and tick callback registration, including the Modrinth update check's Minecraft version lookup. - Corrected Fabric API and Java 8 build settings for Minecraft 1.14.3, and hardened Forge and NeoForge shutdown handling.

# MineLights 2.3.8.4 This release adds Forge configuration menus, refined settings across Minecraft versions, improved reliability of the mod update checker, and fixes issues with the config screen on NeoForge. Previous server version compatible (as of 2.3.1)! ## Key Features & Major Changes - Added Forge configuration menu support, including a built-in settings screen for older Forge versions. - Fixed MineLights settings failing to open on NeoForge 1.21.1 with Mod Menu ([#30](https://github.com/megabytesme/MineLights/issues/30)). - Updated settings menus to show features available in the current Minecraft version. - Fixed update notices being dropped when the Modrinth check finished before a world was joined. ## Installation / Upgrade Instructions - DELETE your old mine-lights-\*.jar file completely. - Download the jar from this release. - Place the new minelights-\*.jar into your mods folder. - Install Cloth Config, here: [https://modrinth.com/mod/cloth-config](https://modrinth.com/mod/cloth-config) - **OpenRGB (optional):** The latest OpenRGB version is recommended. After installing or updating OpenRGB, restart your computer before using MineLights. Start OpenRGB, open the **SDK Server** tab, and click **Start Server**. Keep OpenRGB running while Minecraft is open. MineLights connects to the local server at `127.0.0.1:6742` (the default SDK server address and port). - Run Minecraft. - Using anything which is not OpenRGB? 1. Start Minecraft. 2. Wait for MineLights.exe to finish downloading in the background. 3. If all goes well, you will see a dialog asking you if you want to grant `MineLights.exe` permission to access the internet. 4. After accepting, your supported devices will show red. ## Full Changelog & Technical Details - Added Forge config screen integration across supported releases, with a native screen on older versions that do not use Cloth Config. - Fixed the NeoForge config screen factory for the API signature used by NeoForge 1.21.1, resolving the `AbstractMethodError` reported in [issue #30](https://github.com/megabytesme/MineLights/issues/30). - Reworked legacy Forge settings with separate category tabs, page navigation that stays within the selected tab, and a dedicated About section. - Hid Locator Bar settings before Minecraft 26.1 and End Flash settings before Minecraft 1.21.9 in applicable configuration menus. - Queued Modrinth update notices until a player is available, across Fabric, Quilt, Forge, and NeoForge. - Updated older Fabric version detection and tick callback registration, including the Modrinth update check's Minecraft version lookup. - Corrected Fabric API and Java 8 build settings for Minecraft 1.14.3, and hardened Forge and NeoForge shutdown handling.

# MineLights 2.3.8.4 This release adds Forge configuration menus, refined settings across Minecraft versions, improved reliability of the mod update checker, and fixes issues with the config screen on NeoForge. Previous server version compatible (as of 2.3.1)! ## Key Features & Major Changes - Added Forge configuration menu support, including a built-in settings screen for older Forge versions. - Fixed MineLights settings failing to open on NeoForge 1.21.1 with Mod Menu ([#30](https://github.com/megabytesme/MineLights/issues/30)). - Updated settings menus to show features available in the current Minecraft version. - Fixed update notices being dropped when the Modrinth check finished before a world was joined. ## Installation / Upgrade Instructions - DELETE your old mine-lights-\*.jar file completely. - Download the jar from this release. - Place the new minelights-\*.jar into your mods folder. - Install Cloth Config, here: [https://modrinth.com/mod/cloth-config](https://modrinth.com/mod/cloth-config) - **OpenRGB (optional):** The latest OpenRGB version is recommended. After installing or updating OpenRGB, restart your computer before using MineLights. Start OpenRGB, open the **SDK Server** tab, and click **Start Server**. Keep OpenRGB running while Minecraft is open. MineLights connects to the local server at `127.0.0.1:6742` (the default SDK server address and port). - Run Minecraft. - Using anything which is not OpenRGB? 1. Start Minecraft. 2. Wait for MineLights.exe to finish downloading in the background. 3. If all goes well, you will see a dialog asking you if you want to grant `MineLights.exe` permission to access the internet. 4. After accepting, your supported devices will show red. ## Full Changelog & Technical Details - Added Forge config screen integration across supported releases, with a native screen on older versions that do not use Cloth Config. - Fixed the NeoForge config screen factory for the API signature used by NeoForge 1.21.1, resolving the `AbstractMethodError` reported in [issue #30](https://github.com/megabytesme/MineLights/issues/30). - Reworked legacy Forge settings with separate category tabs, page navigation that stays within the selected tab, and a dedicated About section. - Hid Locator Bar settings before Minecraft 26.1 and End Flash settings before Minecraft 1.21.9 in applicable configuration menus. - Queued Modrinth update notices until a player is available, across Fabric, Quilt, Forge, and NeoForge. - Updated older Fabric version detection and tick callback registration, including the Modrinth update check's Minecraft version lookup. - Corrected Fabric API and Java 8 build settings for Minecraft 1.14.3, and hardened Forge and NeoForge shutdown handling.

# MineLights 2.3.8.4 This release adds Forge configuration menus, refined settings across Minecraft versions, improved reliability of the mod update checker, and fixes issues with the config screen on NeoForge. Previous server version compatible (as of 2.3.1)! ## Key Features & Major Changes - Added Forge configuration menu support, including a built-in settings screen for older Forge versions. - Fixed MineLights settings failing to open on NeoForge 1.21.1 with Mod Menu ([#30](https://github.com/megabytesme/MineLights/issues/30)). - Updated settings menus to show features available in the current Minecraft version. - Fixed update notices being dropped when the Modrinth check finished before a world was joined. ## Installation / Upgrade Instructions - DELETE your old mine-lights-\*.jar file completely. - Download the jar from this release. - Place the new minelights-\*.jar into your mods folder. - Install Cloth Config, here: [https://modrinth.com/mod/cloth-config](https://modrinth.com/mod/cloth-config) - **OpenRGB (optional):** The latest OpenRGB version is recommended. After installing or updating OpenRGB, restart your computer before using MineLights. Start OpenRGB, open the **SDK Server** tab, and click **Start Server**. Keep OpenRGB running while Minecraft is open. MineLights connects to the local server at `127.0.0.1:6742` (the default SDK server address and port). - Run Minecraft. - Using anything which is not OpenRGB? 1. Start Minecraft. 2. Wait for MineLights.exe to finish downloading in the background. 3. If all goes well, you will see a dialog asking you if you want to grant `MineLights.exe` permission to access the internet. 4. After accepting, your supported devices will show red. ## Full Changelog & Technical Details - Added Forge config screen integration across supported releases, with a native screen on older versions that do not use Cloth Config. - Fixed the NeoForge config screen factory for the API signature used by NeoForge 1.21.1, resolving the `AbstractMethodError` reported in [issue #30](https://github.com/megabytesme/MineLights/issues/30). - Reworked legacy Forge settings with separate category tabs, page navigation that stays within the selected tab, and a dedicated About section. - Hid Locator Bar settings before Minecraft 26.1 and End Flash settings before Minecraft 1.21.9 in applicable configuration menus. - Queued Modrinth update notices until a player is available, across Fabric, Quilt, Forge, and NeoForge. - Updated older Fabric version detection and tick callback registration, including the Modrinth update check's Minecraft version lookup. - Corrected Fabric API and Java 8 build settings for Minecraft 1.14.3, and hardened Forge and NeoForge shutdown handling.

# MineLights 2.3.8.4 This release adds Forge configuration menus, refined settings across Minecraft versions, improved reliability of the mod update checker, and fixes issues with the config screen on NeoForge. Previous server version compatible (as of 2.3.1)! ## Key Features & Major Changes - Added Forge configuration menu support, including a built-in settings screen for older Forge versions. - Fixed MineLights settings failing to open on NeoForge 1.21.1 with Mod Menu ([#30](https://github.com/megabytesme/MineLights/issues/30)). - Updated settings menus to show features available in the current Minecraft version. - Fixed update notices being dropped when the Modrinth check finished before a world was joined. ## Installation / Upgrade Instructions - DELETE your old mine-lights-\*.jar file completely. - Download the jar from this release. - Place the new minelights-\*.jar into your mods folder. - Install Cloth Config, here: [https://modrinth.com/mod/cloth-config](https://modrinth.com/mod/cloth-config) - **OpenRGB (optional):** The latest OpenRGB version is recommended. After installing or updating OpenRGB, restart your computer before using MineLights. Start OpenRGB, open the **SDK Server** tab, and click **Start Server**. Keep OpenRGB running while Minecraft is open. MineLights connects to the local server at `127.0.0.1:6742` (the default SDK server address and port). - Run Minecraft. - Using anything which is not OpenRGB? 1. Start Minecraft. 2. Wait for MineLights.exe to finish downloading in the background. 3. If all goes well, you will see a dialog asking you if you want to grant `MineLights.exe` permission to access the internet. 4. After accepting, your supported devices will show red. ## Full Changelog & Technical Details - Added Forge config screen integration across supported releases, with a native screen on older versions that do not use Cloth Config. - Fixed the NeoForge config screen factory for the API signature used by NeoForge 1.21.1, resolving the `AbstractMethodError` reported in [issue #30](https://github.com/megabytesme/MineLights/issues/30). - Reworked legacy Forge settings with separate category tabs, page navigation that stays within the selected tab, and a dedicated About section. - Hid Locator Bar settings before Minecraft 26.1 and End Flash settings before Minecraft 1.21.9 in applicable configuration menus. - Queued Modrinth update notices until a player is available, across Fabric, Quilt, Forge, and NeoForge. - Updated older Fabric version detection and tick callback registration, including the Modrinth update check's Minecraft version lookup. - Corrected Fabric API and Java 8 build settings for Minecraft 1.14.3, and hardened Forge and NeoForge shutdown handling.

# MineLights 2.3.8.4 This release adds Forge configuration menus, refined settings across Minecraft versions, improved reliability of the mod update checker, and fixes issues with the config screen on NeoForge. Previous server version compatible (as of 2.3.1)! ## Key Features & Major Changes - Added Forge configuration menu support, including a built-in settings screen for older Forge versions. - Fixed MineLights settings failing to open on NeoForge 1.21.1 with Mod Menu ([#30](https://github.com/megabytesme/MineLights/issues/30)). - Updated settings menus to show features available in the current Minecraft version. - Fixed update notices being dropped when the Modrinth check finished before a world was joined. ## Installation / Upgrade Instructions - DELETE your old mine-lights-\*.jar file completely. - Download the jar from this release. - Place the new minelights-\*.jar into your mods folder. - Install Cloth Config, here: [https://modrinth.com/mod/cloth-config](https://modrinth.com/mod/cloth-config) - **OpenRGB (optional):** The latest OpenRGB version is recommended. After installing or updating OpenRGB, restart your computer before using MineLights. Start OpenRGB, open the **SDK Server** tab, and click **Start Server**. Keep OpenRGB running while Minecraft is open. MineLights connects to the local server at `127.0.0.1:6742` (the default SDK server address and port). - Run Minecraft. - Using anything which is not OpenRGB? 1. Start Minecraft. 2. Wait for MineLights.exe to finish downloading in the background. 3. If all goes well, you will see a dialog asking you if you want to grant `MineLights.exe` permission to access the internet. 4. After accepting, your supported devices will show red. ## Full Changelog & Technical Details - Added Forge config screen integration across supported releases, with a native screen on older versions that do not use Cloth Config. - Fixed the NeoForge config screen factory for the API signature used by NeoForge 1.21.1, resolving the `AbstractMethodError` reported in [issue #30](https://github.com/megabytesme/MineLights/issues/30). - Reworked legacy Forge settings with separate category tabs, page navigation that stays within the selected tab, and a dedicated About section. - Hid Locator Bar settings before Minecraft 26.1 and End Flash settings before Minecraft 1.21.9 in applicable configuration menus. - Queued Modrinth update notices until a player is available, across Fabric, Quilt, Forge, and NeoForge. - Updated older Fabric version detection and tick callback registration, including the Modrinth update check's Minecraft version lookup. - Corrected Fabric API and Java 8 build settings for Minecraft 1.14.3, and hardened Forge and NeoForge shutdown handling.

# MineLights 2.3.8.4 This release adds Forge configuration menus, refined settings across Minecraft versions, improved reliability of the mod update checker, and fixes issues with the config screen on NeoForge. Previous server version compatible (as of 2.3.1)! ## Key Features & Major Changes - Added Forge configuration menu support, including a built-in settings screen for older Forge versions. - Fixed MineLights settings failing to open on NeoForge 1.21.1 with Mod Menu ([#30](https://github.com/megabytesme/MineLights/issues/30)). - Updated settings menus to show features available in the current Minecraft version. - Fixed update notices being dropped when the Modrinth check finished before a world was joined. ## Installation / Upgrade Instructions - DELETE your old mine-lights-\*.jar file completely. - Download the jar from this release. - Place the new minelights-\*.jar into your mods folder. - Install Cloth Config, here: [https://modrinth.com/mod/cloth-config](https://modrinth.com/mod/cloth-config) - **OpenRGB (optional):** The latest OpenRGB version is recommended. After installing or updating OpenRGB, restart your computer before using MineLights. Start OpenRGB, open the **SDK Server** tab, and click **Start Server**. Keep OpenRGB running while Minecraft is open. MineLights connects to the local server at `127.0.0.1:6742` (the default SDK server address and port). - Run Minecraft. - Using anything which is not OpenRGB? 1. Start Minecraft. 2. Wait for MineLights.exe to finish downloading in the background. 3. If all goes well, you will see a dialog asking you if you want to grant `MineLights.exe` permission to access the internet. 4. After accepting, your supported devices will show red. ## Full Changelog & Technical Details - Added Forge config screen integration across supported releases, with a native screen on older versions that do not use Cloth Config. - Fixed the NeoForge config screen factory for the API signature used by NeoForge 1.21.1, resolving the `AbstractMethodError` reported in [issue #30](https://github.com/megabytesme/MineLights/issues/30). - Reworked legacy Forge settings with separate category tabs, page navigation that stays within the selected tab, and a dedicated About section. - Hid Locator Bar settings before Minecraft 26.1 and End Flash settings before Minecraft 1.21.9 in applicable configuration menus. - Queued Modrinth update notices until a player is available, across Fabric, Quilt, Forge, and NeoForge. - Updated older Fabric version detection and tick callback registration, including the Modrinth update check's Minecraft version lookup. - Corrected Fabric API and Java 8 build settings for Minecraft 1.14.3, and hardened Forge and NeoForge shutdown handling.

# MineLights 2.3.8.4 This release adds Forge configuration menus, refined settings across Minecraft versions, improved reliability of the mod update checker, and fixes issues with the config screen on NeoForge. Previous server version compatible (as of 2.3.1)! ## Key Features & Major Changes - Added Forge configuration menu support, including a built-in settings screen for older Forge versions. - Fixed MineLights settings failing to open on NeoForge 1.21.1 with Mod Menu ([#30](https://github.com/megabytesme/MineLights/issues/30)). - Updated settings menus to show features available in the current Minecraft version. - Fixed update notices being dropped when the Modrinth check finished before a world was joined. ## Installation / Upgrade Instructions - DELETE your old mine-lights-\*.jar file completely. - Download the jar from this release. - Place the new minelights-\*.jar into your mods folder. - Install Cloth Config, here: [https://modrinth.com/mod/cloth-config](https://modrinth.com/mod/cloth-config) - **OpenRGB (optional):** The latest OpenRGB version is recommended. After installing or updating OpenRGB, restart your computer before using MineLights. Start OpenRGB, open the **SDK Server** tab, and click **Start Server**. Keep OpenRGB running while Minecraft is open. MineLights connects to the local server at `127.0.0.1:6742` (the default SDK server address and port). - Run Minecraft. - Using anything which is not OpenRGB? 1. Start Minecraft. 2. Wait for MineLights.exe to finish downloading in the background. 3. If all goes well, you will see a dialog asking you if you want to grant `MineLights.exe` permission to access the internet. 4. After accepting, your supported devices will show red. ## Full Changelog & Technical Details - Added Forge config screen integration across supported releases, with a native screen on older versions that do not use Cloth Config. - Fixed the NeoForge config screen factory for the API signature used by NeoForge 1.21.1, resolving the `AbstractMethodError` reported in [issue #30](https://github.com/megabytesme/MineLights/issues/30). - Reworked legacy Forge settings with separate category tabs, page navigation that stays within the selected tab, and a dedicated About section. - Hid Locator Bar settings before Minecraft 26.1 and End Flash settings before Minecraft 1.21.9 in applicable configuration menus. - Queued Modrinth update notices until a player is available, across Fabric, Quilt, Forge, and NeoForge. - Updated older Fabric version detection and tick callback registration, including the Modrinth update check's Minecraft version lookup. - Corrected Fabric API and Java 8 build settings for Minecraft 1.14.3, and hardened Forge and NeoForge shutdown handling.

# MineLights 2.3.8.4 This release adds Forge configuration menus, refined settings across Minecraft versions, improved reliability of the mod update checker, and fixes issues with the config screen on NeoForge. Previous server version compatible (as of 2.3.1)! ## Key Features & Major Changes - Added Forge configuration menu support, including a built-in settings screen for older Forge versions. - Fixed MineLights settings failing to open on NeoForge 1.21.1 with Mod Menu ([#30](https://github.com/megabytesme/MineLights/issues/30)). - Updated settings menus to show features available in the current Minecraft version. - Fixed update notices being dropped when the Modrinth check finished before a world was joined. ## Installation / Upgrade Instructions - DELETE your old mine-lights-\*.jar file completely. - Download the jar from this release. - Place the new minelights-\*.jar into your mods folder. - Install Cloth Config, here: [https://modrinth.com/mod/cloth-config](https://modrinth.com/mod/cloth-config) - **OpenRGB (optional):** The latest OpenRGB version is recommended. After installing or updating OpenRGB, restart your computer before using MineLights. Start OpenRGB, open the **SDK Server** tab, and click **Start Server**. Keep OpenRGB running while Minecraft is open. MineLights connects to the local server at `127.0.0.1:6742` (the default SDK server address and port). - Run Minecraft. - Using anything which is not OpenRGB? 1. Start Minecraft. 2. Wait for MineLights.exe to finish downloading in the background. 3. If all goes well, you will see a dialog asking you if you want to grant `MineLights.exe` permission to access the internet. 4. After accepting, your supported devices will show red. ## Full Changelog & Technical Details - Added Forge config screen integration across supported releases, with a native screen on older versions that do not use Cloth Config. - Fixed the NeoForge config screen factory for the API signature used by NeoForge 1.21.1, resolving the `AbstractMethodError` reported in [issue #30](https://github.com/megabytesme/MineLights/issues/30). - Reworked legacy Forge settings with separate category tabs, page navigation that stays within the selected tab, and a dedicated About section. - Hid Locator Bar settings before Minecraft 26.1 and End Flash settings before Minecraft 1.21.9 in applicable configuration menus. - Queued Modrinth update notices until a player is available, across Fabric, Quilt, Forge, and NeoForge. - Updated older Fabric version detection and tick callback registration, including the Modrinth update check's Minecraft version lookup. - Corrected Fabric API and Java 8 build settings for Minecraft 1.14.3, and hardened Forge and NeoForge shutdown handling.

# MineLights 2.3.8.4 This release adds Forge configuration menus, refined settings across Minecraft versions, improved reliability of the mod update checker, and fixes issues with the config screen on NeoForge. Previous server version compatible (as of 2.3.1)! ## Key Features & Major Changes - Added Forge configuration menu support, including a built-in settings screen for older Forge versions. - Fixed MineLights settings failing to open on NeoForge 1.21.1 with Mod Menu ([#30](https://github.com/megabytesme/MineLights/issues/30)). - Updated settings menus to show features available in the current Minecraft version. - Fixed update notices being dropped when the Modrinth check finished before a world was joined. ## Installation / Upgrade Instructions - DELETE your old mine-lights-\*.jar file completely. - Download the jar from this release. - Place the new minelights-\*.jar into your mods folder. - Install Cloth Config, here: [https://modrinth.com/mod/cloth-config](https://modrinth.com/mod/cloth-config) - **OpenRGB (optional):** The latest OpenRGB version is recommended. After installing or updating OpenRGB, restart your computer before using MineLights. Start OpenRGB, open the **SDK Server** tab, and click **Start Server**. Keep OpenRGB running while Minecraft is open. MineLights connects to the local server at `127.0.0.1:6742` (the default SDK server address and port). - Run Minecraft. - Using anything which is not OpenRGB? 1. Start Minecraft. 2. Wait for MineLights.exe to finish downloading in the background. 3. If all goes well, you will see a dialog asking you if you want to grant `MineLights.exe` permission to access the internet. 4. After accepting, your supported devices will show red. ## Full Changelog & Technical Details - Added Forge config screen integration across supported releases, with a native screen on older versions that do not use Cloth Config. - Fixed the NeoForge config screen factory for the API signature used by NeoForge 1.21.1, resolving the `AbstractMethodError` reported in [issue #30](https://github.com/megabytesme/MineLights/issues/30). - Reworked legacy Forge settings with separate category tabs, page navigation that stays within the selected tab, and a dedicated About section. - Hid Locator Bar settings before Minecraft 26.1 and End Flash settings before Minecraft 1.21.9 in applicable configuration menus. - Queued Modrinth update notices until a player is available, across Fabric, Quilt, Forge, and NeoForge. - Updated older Fabric version detection and tick callback registration, including the Modrinth update check's Minecraft version lookup. - Corrected Fabric API and Java 8 build settings for Minecraft 1.14.3, and hardened Forge and NeoForge shutdown handling.

# MineLights 2.3.8.4 This release adds Forge configuration menus, refined settings across Minecraft versions, improved reliability of the mod update checker, and fixes issues with the config screen on NeoForge. Previous server version compatible (as of 2.3.1)! ## Key Features & Major Changes - Added Forge configuration menu support, including a built-in settings screen for older Forge versions. - Fixed MineLights settings failing to open on NeoForge 1.21.1 with Mod Menu ([#30](https://github.com/megabytesme/MineLights/issues/30)). - Updated settings menus to show features available in the current Minecraft version. - Fixed update notices being dropped when the Modrinth check finished before a world was joined. ## Installation / Upgrade Instructions - DELETE your old mine-lights-\*.jar file completely. - Download the jar from this release. - Place the new minelights-\*.jar into your mods folder. - Install Cloth Config, here: [https://modrinth.com/mod/cloth-config](https://modrinth.com/mod/cloth-config) - **OpenRGB (optional):** The latest OpenRGB version is recommended. After installing or updating OpenRGB, restart your computer before using MineLights. Start OpenRGB, open the **SDK Server** tab, and click **Start Server**. Keep OpenRGB running while Minecraft is open. MineLights connects to the local server at `127.0.0.1:6742` (the default SDK server address and port). - Run Minecraft. - Using anything which is not OpenRGB? 1. Start Minecraft. 2. Wait for MineLights.exe to finish downloading in the background. 3. If all goes well, you will see a dialog asking you if you want to grant `MineLights.exe` permission to access the internet. 4. After accepting, your supported devices will show red. ## Full Changelog & Technical Details - Added Forge config screen integration across supported releases, with a native screen on older versions that do not use Cloth Config. - Fixed the NeoForge config screen factory for the API signature used by NeoForge 1.21.1, resolving the `AbstractMethodError` reported in [issue #30](https://github.com/megabytesme/MineLights/issues/30). - Reworked legacy Forge settings with separate category tabs, page navigation that stays within the selected tab, and a dedicated About section. - Hid Locator Bar settings before Minecraft 26.1 and End Flash settings before Minecraft 1.21.9 in applicable configuration menus. - Queued Modrinth update notices until a player is available, across Fabric, Quilt, Forge, and NeoForge. - Updated older Fabric version detection and tick callback registration, including the Modrinth update check's Minecraft version lookup. - Corrected Fabric API and Java 8 build settings for Minecraft 1.14.3, and hardened Forge and NeoForge shutdown handling.

# MineLights 2.3.8.4 This release adds Forge configuration menus, refined settings across Minecraft versions, improved reliability of the mod update checker, and fixes issues with the config screen on NeoForge. Previous server version compatible (as of 2.3.1)! ## Key Features & Major Changes - Added Forge configuration menu support, including a built-in settings screen for older Forge versions. - Fixed MineLights settings failing to open on NeoForge 1.21.1 with Mod Menu ([#30](https://github.com/megabytesme/MineLights/issues/30)). - Updated settings menus to show features available in the current Minecraft version. - Fixed update notices being dropped when the Modrinth check finished before a world was joined. ## Installation / Upgrade Instructions - DELETE your old mine-lights-\*.jar file completely. - Download the jar from this release. - Place the new minelights-\*.jar into your mods folder. - Install Cloth Config, here: [https://modrinth.com/mod/cloth-config](https://modrinth.com/mod/cloth-config) - **OpenRGB (optional):** The latest OpenRGB version is recommended. After installing or updating OpenRGB, restart your computer before using MineLights. Start OpenRGB, open the **SDK Server** tab, and click **Start Server**. Keep OpenRGB running while Minecraft is open. MineLights connects to the local server at `127.0.0.1:6742` (the default SDK server address and port). - Run Minecraft. - Using anything which is not OpenRGB? 1. Start Minecraft. 2. Wait for MineLights.exe to finish downloading in the background. 3. If all goes well, you will see a dialog asking you if you want to grant `MineLights.exe` permission to access the internet. 4. After accepting, your supported devices will show red. ## Full Changelog & Technical Details - Added Forge config screen integration across supported releases, with a native screen on older versions that do not use Cloth Config. - Fixed the NeoForge config screen factory for the API signature used by NeoForge 1.21.1, resolving the `AbstractMethodError` reported in [issue #30](https://github.com/megabytesme/MineLights/issues/30). - Reworked legacy Forge settings with separate category tabs, page navigation that stays within the selected tab, and a dedicated About section. - Hid Locator Bar settings before Minecraft 26.1 and End Flash settings before Minecraft 1.21.9 in applicable configuration menus. - Queued Modrinth update notices until a player is available, across Fabric, Quilt, Forge, and NeoForge. - Updated older Fabric version detection and tick callback registration, including the Modrinth update check's Minecraft version lookup. - Corrected Fabric API and Java 8 build settings for Minecraft 1.14.3, and hardened Forge and NeoForge shutdown handling.

# MineLights 2.3.8.4 This release adds Forge configuration menus, refined settings across Minecraft versions, improved reliability of the mod update checker, and fixes issues with the config screen on NeoForge. Previous server version compatible (as of 2.3.1)! ## Key Features & Major Changes - Added Forge configuration menu support, including a built-in settings screen for older Forge versions. - Fixed MineLights settings failing to open on NeoForge 1.21.1 with Mod Menu ([#30](https://github.com/megabytesme/MineLights/issues/30)). - Updated settings menus to show features available in the current Minecraft version. - Fixed update notices being dropped when the Modrinth check finished before a world was joined. ## Installation / Upgrade Instructions - DELETE your old mine-lights-\*.jar file completely. - Download the jar from this release. - Place the new minelights-\*.jar into your mods folder. - Install Cloth Config, here: [https://modrinth.com/mod/cloth-config](https://modrinth.com/mod/cloth-config) - **OpenRGB (optional):** The latest OpenRGB version is recommended. After installing or updating OpenRGB, restart your computer before using MineLights. Start OpenRGB, open the **SDK Server** tab, and click **Start Server**. Keep OpenRGB running while Minecraft is open. MineLights connects to the local server at `127.0.0.1:6742` (the default SDK server address and port). - Run Minecraft. - Using anything which is not OpenRGB? 1. Start Minecraft. 2. Wait for MineLights.exe to finish downloading in the background. 3. If all goes well, you will see a dialog asking you if you want to grant `MineLights.exe` permission to access the internet. 4. After accepting, your supported devices will show red. ## Full Changelog & Technical Details - Added Forge config screen integration across supported releases, with a native screen on older versions that do not use Cloth Config. - Fixed the NeoForge config screen factory for the API signature used by NeoForge 1.21.1, resolving the `AbstractMethodError` reported in [issue #30](https://github.com/megabytesme/MineLights/issues/30). - Reworked legacy Forge settings with separate category tabs, page navigation that stays within the selected tab, and a dedicated About section. - Hid Locator Bar settings before Minecraft 26.1 and End Flash settings before Minecraft 1.21.9 in applicable configuration menus. - Queued Modrinth update notices until a player is available, across Fabric, Quilt, Forge, and NeoForge. - Updated older Fabric version detection and tick callback registration, including the Modrinth update check's Minecraft version lookup. - Corrected Fabric API and Java 8 build settings for Minecraft 1.14.3, and hardened Forge and NeoForge shutdown handling.

# MineLights 2.3.8.4 This release adds Forge configuration menus, refined settings across Minecraft versions, improved reliability of the mod update checker, and fixes issues with the config screen on NeoForge. Previous server version compatible (as of 2.3.1)! ## Key Features & Major Changes - Added Forge configuration menu support, including a built-in settings screen for older Forge versions. - Fixed MineLights settings failing to open on NeoForge 1.21.1 with Mod Menu ([#30](https://github.com/megabytesme/MineLights/issues/30)). - Updated settings menus to show features available in the current Minecraft version. - Fixed update notices being dropped when the Modrinth check finished before a world was joined. ## Installation / Upgrade Instructions - DELETE your old mine-lights-\*.jar file completely. - Download the jar from this release. - Place the new minelights-\*.jar into your mods folder. - Install Cloth Config, here: [https://modrinth.com/mod/cloth-config](https://modrinth.com/mod/cloth-config) - **OpenRGB (optional):** The latest OpenRGB version is recommended. After installing or updating OpenRGB, restart your computer before using MineLights. Start OpenRGB, open the **SDK Server** tab, and click **Start Server**. Keep OpenRGB running while Minecraft is open. MineLights connects to the local server at `127.0.0.1:6742` (the default SDK server address and port). - Run Minecraft. - Using anything which is not OpenRGB? 1. Start Minecraft. 2. Wait for MineLights.exe to finish downloading in the background. 3. If all goes well, you will see a dialog asking you if you want to grant `MineLights.exe` permission to access the internet. 4. After accepting, your supported devices will show red. ## Full Changelog & Technical Details - Added Forge config screen integration across supported releases, with a native screen on older versions that do not use Cloth Config. - Fixed the NeoForge config screen factory for the API signature used by NeoForge 1.21.1, resolving the `AbstractMethodError` reported in [issue #30](https://github.com/megabytesme/MineLights/issues/30). - Reworked legacy Forge settings with separate category tabs, page navigation that stays within the selected tab, and a dedicated About section. - Hid Locator Bar settings before Minecraft 26.1 and End Flash settings before Minecraft 1.21.9 in applicable configuration menus. - Queued Modrinth update notices until a player is available, across Fabric, Quilt, Forge, and NeoForge. - Updated older Fabric version detection and tick callback registration, including the Modrinth update check's Minecraft version lookup. - Corrected Fabric API and Java 8 build settings for Minecraft 1.14.3, and hardened Forge and NeoForge shutdown handling.

# MineLights 2.3.8.4 This release adds Forge configuration menus, refined settings across Minecraft versions, improved reliability of the mod update checker, and fixes issues with the config screen on NeoForge. Previous server version compatible (as of 2.3.1)! ## Key Features & Major Changes - Added Forge configuration menu support, including a built-in settings screen for older Forge versions. - Fixed MineLights settings failing to open on NeoForge 1.21.1 with Mod Menu ([#30](https://github.com/megabytesme/MineLights/issues/30)). - Updated settings menus to show features available in the current Minecraft version. - Fixed update notices being dropped when the Modrinth check finished before a world was joined. ## Installation / Upgrade Instructions - DELETE your old mine-lights-\*.jar file completely. - Download the jar from this release. - Place the new minelights-\*.jar into your mods folder. - Install Cloth Config, here: [https://modrinth.com/mod/cloth-config](https://modrinth.com/mod/cloth-config) - **OpenRGB (optional):** The latest OpenRGB version is recommended. After installing or updating OpenRGB, restart your computer before using MineLights. Start OpenRGB, open the **SDK Server** tab, and click **Start Server**. Keep OpenRGB running while Minecraft is open. MineLights connects to the local server at `127.0.0.1:6742` (the default SDK server address and port). - Run Minecraft. - Using anything which is not OpenRGB? 1. Start Minecraft. 2. Wait for MineLights.exe to finish downloading in the background. 3. If all goes well, you will see a dialog asking you if you want to grant `MineLights.exe` permission to access the internet. 4. After accepting, your supported devices will show red. ## Full Changelog & Technical Details - Added Forge config screen integration across supported releases, with a native screen on older versions that do not use Cloth Config. - Fixed the NeoForge config screen factory for the API signature used by NeoForge 1.21.1, resolving the `AbstractMethodError` reported in [issue #30](https://github.com/megabytesme/MineLights/issues/30). - Reworked legacy Forge settings with separate category tabs, page navigation that stays within the selected tab, and a dedicated About section. - Hid Locator Bar settings before Minecraft 26.1 and End Flash settings before Minecraft 1.21.9 in applicable configuration menus. - Queued Modrinth update notices until a player is available, across Fabric, Quilt, Forge, and NeoForge. - Updated older Fabric version detection and tick callback registration, including the Modrinth update check's Minecraft version lookup. - Corrected Fabric API and Java 8 build settings for Minecraft 1.14.3, and hardened Forge and NeoForge shutdown handling.

# MineLights 2.3.8.4 This release adds Forge configuration menus, refined settings across Minecraft versions, improved reliability of the mod update checker, and fixes issues with the config screen on NeoForge. Previous server version compatible (as of 2.3.1)! ## Key Features & Major Changes - Added Forge configuration menu support, including a built-in settings screen for older Forge versions. - Fixed MineLights settings failing to open on NeoForge 1.21.1 with Mod Menu ([#30](https://github.com/megabytesme/MineLights/issues/30)). - Updated settings menus to show features available in the current Minecraft version. - Fixed update notices being dropped when the Modrinth check finished before a world was joined. ## Installation / Upgrade Instructions - DELETE your old mine-lights-\*.jar file completely. - Download the jar from this release. - Place the new minelights-\*.jar into your mods folder. - Install Cloth Config, here: [https://modrinth.com/mod/cloth-config](https://modrinth.com/mod/cloth-config) - **OpenRGB (optional):** The latest OpenRGB version is recommended. After installing or updating OpenRGB, restart your computer before using MineLights. Start OpenRGB, open the **SDK Server** tab, and click **Start Server**. Keep OpenRGB running while Minecraft is open. MineLights connects to the local server at `127.0.0.1:6742` (the default SDK server address and port). - Run Minecraft. - Using anything which is not OpenRGB? 1. Start Minecraft. 2. Wait for MineLights.exe to finish downloading in the background. 3. If all goes well, you will see a dialog asking you if you want to grant `MineLights.exe` permission to access the internet. 4. After accepting, your supported devices will show red. ## Full Changelog & Technical Details - Added Forge config screen integration across supported releases, with a native screen on older versions that do not use Cloth Config. - Fixed the NeoForge config screen factory for the API signature used by NeoForge 1.21.1, resolving the `AbstractMethodError` reported in [issue #30](https://github.com/megabytesme/MineLights/issues/30). - Reworked legacy Forge settings with separate category tabs, page navigation that stays within the selected tab, and a dedicated About section. - Hid Locator Bar settings before Minecraft 26.1 and End Flash settings before Minecraft 1.21.9 in applicable configuration menus. - Queued Modrinth update notices until a player is available, across Fabric, Quilt, Forge, and NeoForge. - Updated older Fabric version detection and tick callback registration, including the Modrinth update check's Minecraft version lookup. - Corrected Fabric API and Java 8 build settings for Minecraft 1.14.3, and hardened Forge and NeoForge shutdown handling.

# MineLights 2.3.8.4 This release adds Forge configuration menus, refined settings across Minecraft versions, improved reliability of the mod update checker, and fixes issues with the config screen on NeoForge. Previous server version compatible (as of 2.3.1)! ## Key Features & Major Changes - Added Forge configuration menu support, including a built-in settings screen for older Forge versions. - Fixed MineLights settings failing to open on NeoForge 1.21.1 with Mod Menu ([#30](https://github.com/megabytesme/MineLights/issues/30)). - Updated settings menus to show features available in the current Minecraft version. - Fixed update notices being dropped when the Modrinth check finished before a world was joined. ## Installation / Upgrade Instructions - DELETE your old mine-lights-\*.jar file completely. - Download the jar from this release. - Place the new minelights-\*.jar into your mods folder. - Install Cloth Config, here: [https://modrinth.com/mod/cloth-config](https://modrinth.com/mod/cloth-config) - **OpenRGB (optional):** The latest OpenRGB version is recommended. After installing or updating OpenRGB, restart your computer before using MineLights. Start OpenRGB, open the **SDK Server** tab, and click **Start Server**. Keep OpenRGB running while Minecraft is open. MineLights connects to the local server at `127.0.0.1:6742` (the default SDK server address and port). - Run Minecraft. - Using anything which is not OpenRGB? 1. Start Minecraft. 2. Wait for MineLights.exe to finish downloading in the background. 3. If all goes well, you will see a dialog asking you if you want to grant `MineLights.exe` permission to access the internet. 4. After accepting, your supported devices will show red. ## Full Changelog & Technical Details - Added Forge config screen integration across supported releases, with a native screen on older versions that do not use Cloth Config. - Fixed the NeoForge config screen factory for the API signature used by NeoForge 1.21.1, resolving the `AbstractMethodError` reported in [issue #30](https://github.com/megabytesme/MineLights/issues/30). - Reworked legacy Forge settings with separate category tabs, page navigation that stays within the selected tab, and a dedicated About section. - Hid Locator Bar settings before Minecraft 26.1 and End Flash settings before Minecraft 1.21.9 in applicable configuration menus. - Queued Modrinth update notices until a player is available, across Fabric, Quilt, Forge, and NeoForge. - Updated older Fabric version detection and tick callback registration, including the Modrinth update check's Minecraft version lookup. - Corrected Fabric API and Java 8 build settings for Minecraft 1.14.3, and hardened Forge and NeoForge shutdown handling.

# MineLights 2.3.8.4 This release adds Forge configuration menus, refined settings across Minecraft versions, improved reliability of the mod update checker, and fixes issues with the config screen on NeoForge. Previous server version compatible (as of 2.3.1)! ## Key Features & Major Changes - Added Forge configuration menu support, including a built-in settings screen for older Forge versions. - Fixed MineLights settings failing to open on NeoForge 1.21.1 with Mod Menu ([#30](https://github.com/megabytesme/MineLights/issues/30)). - Updated settings menus to show features available in the current Minecraft version. - Fixed update notices being dropped when the Modrinth check finished before a world was joined. ## Installation / Upgrade Instructions - DELETE your old mine-lights-\*.jar file completely. - Download the jar from this release. - Place the new minelights-\*.jar into your mods folder. - Install Cloth Config, here: [https://modrinth.com/mod/cloth-config](https://modrinth.com/mod/cloth-config) - **OpenRGB (optional):** The latest OpenRGB version is recommended. After installing or updating OpenRGB, restart your computer before using MineLights. Start OpenRGB, open the **SDK Server** tab, and click **Start Server**. Keep OpenRGB running while Minecraft is open. MineLights connects to the local server at `127.0.0.1:6742` (the default SDK server address and port). - Run Minecraft. - Using anything which is not OpenRGB? 1. Start Minecraft. 2. Wait for MineLights.exe to finish downloading in the background. 3. If all goes well, you will see a dialog asking you if you want to grant `MineLights.exe` permission to access the internet. 4. After accepting, your supported devices will show red. ## Full Changelog & Technical Details - Added Forge config screen integration across supported releases, with a native screen on older versions that do not use Cloth Config. - Fixed the NeoForge config screen factory for the API signature used by NeoForge 1.21.1, resolving the `AbstractMethodError` reported in [issue #30](https://github.com/megabytesme/MineLights/issues/30). - Reworked legacy Forge settings with separate category tabs, page navigation that stays within the selected tab, and a dedicated About section. - Hid Locator Bar settings before Minecraft 26.1 and End Flash settings before Minecraft 1.21.9 in applicable configuration menus. - Queued Modrinth update notices until a player is available, across Fabric, Quilt, Forge, and NeoForge. - Updated older Fabric version detection and tick callback registration, including the Modrinth update check's Minecraft version lookup. - Corrected Fabric API and Java 8 build settings for Minecraft 1.14.3, and hardened Forge and NeoForge shutdown handling.

# MineLights 2.3.8.4 This release adds Forge configuration menus, refined settings across Minecraft versions, improved reliability of the mod update checker, and fixes issues with the config screen on NeoForge. Previous server version compatible (as of 2.3.1)! ## Key Features & Major Changes - Added Forge configuration menu support, including a built-in settings screen for older Forge versions. - Fixed MineLights settings failing to open on NeoForge 1.21.1 with Mod Menu ([#30](https://github.com/megabytesme/MineLights/issues/30)). - Updated settings menus to show features available in the current Minecraft version. - Fixed update notices being dropped when the Modrinth check finished before a world was joined. ## Installation / Upgrade Instructions - DELETE your old mine-lights-\*.jar file completely. - Download the jar from this release. - Place the new minelights-\*.jar into your mods folder. - Install Cloth Config, here: [https://modrinth.com/mod/cloth-config](https://modrinth.com/mod/cloth-config) - **OpenRGB (optional):** The latest OpenRGB version is recommended. After installing or updating OpenRGB, restart your computer before using MineLights. Start OpenRGB, open the **SDK Server** tab, and click **Start Server**. Keep OpenRGB running while Minecraft is open. MineLights connects to the local server at `127.0.0.1:6742` (the default SDK server address and port). - Run Minecraft. - Using anything which is not OpenRGB? 1. Start Minecraft. 2. Wait for MineLights.exe to finish downloading in the background. 3. If all goes well, you will see a dialog asking you if you want to grant `MineLights.exe` permission to access the internet. 4. After accepting, your supported devices will show red. ## Full Changelog & Technical Details - Added Forge config screen integration across supported releases, with a native screen on older versions that do not use Cloth Config. - Fixed the NeoForge config screen factory for the API signature used by NeoForge 1.21.1, resolving the `AbstractMethodError` reported in [issue #30](https://github.com/megabytesme/MineLights/issues/30). - Reworked legacy Forge settings with separate category tabs, page navigation that stays within the selected tab, and a dedicated About section. - Hid Locator Bar settings before Minecraft 26.1 and End Flash settings before Minecraft 1.21.9 in applicable configuration menus. - Queued Modrinth update notices until a player is available, across Fabric, Quilt, Forge, and NeoForge. - Updated older Fabric version detection and tick callback registration, including the Modrinth update check's Minecraft version lookup. - Corrected Fabric API and Java 8 build settings for Minecraft 1.14.3, and hardened Forge and NeoForge shutdown handling.

# MineLights 2.3.8.4 This release adds Forge configuration menus, refined settings across Minecraft versions, improved reliability of the mod update checker, and fixes issues with the config screen on NeoForge. Previous server version compatible (as of 2.3.1)! ## Key Features & Major Changes - Added Forge configuration menu support, including a built-in settings screen for older Forge versions. - Fixed MineLights settings failing to open on NeoForge 1.21.1 with Mod Menu ([#30](https://github.com/megabytesme/MineLights/issues/30)). - Updated settings menus to show features available in the current Minecraft version. - Fixed update notices being dropped when the Modrinth check finished before a world was joined. ## Installation / Upgrade Instructions - DELETE your old mine-lights-\*.jar file completely. - Download the jar from this release. - Place the new minelights-\*.jar into your mods folder. - Install Cloth Config, here: [https://modrinth.com/mod/cloth-config](https://modrinth.com/mod/cloth-config) - **OpenRGB (optional):** The latest OpenRGB version is recommended. After installing or updating OpenRGB, restart your computer before using MineLights. Start OpenRGB, open the **SDK Server** tab, and click **Start Server**. Keep OpenRGB running while Minecraft is open. MineLights connects to the local server at `127.0.0.1:6742` (the default SDK server address and port). - Run Minecraft. - Using anything which is not OpenRGB? 1. Start Minecraft. 2. Wait for MineLights.exe to finish downloading in the background. 3. If all goes well, you will see a dialog asking you if you want to grant `MineLights.exe` permission to access the internet. 4. After accepting, your supported devices will show red. ## Full Changelog & Technical Details - Added Forge config screen integration across supported releases, with a native screen on older versions that do not use Cloth Config. - Fixed the NeoForge config screen factory for the API signature used by NeoForge 1.21.1, resolving the `AbstractMethodError` reported in [issue #30](https://github.com/megabytesme/MineLights/issues/30). - Reworked legacy Forge settings with separate category tabs, page navigation that stays within the selected tab, and a dedicated About section. - Hid Locator Bar settings before Minecraft 26.1 and End Flash settings before Minecraft 1.21.9 in applicable configuration menus. - Queued Modrinth update notices until a player is available, across Fabric, Quilt, Forge, and NeoForge. - Updated older Fabric version detection and tick callback registration, including the Modrinth update check's Minecraft version lookup. - Corrected Fabric API and Java 8 build settings for Minecraft 1.14.3, and hardened Forge and NeoForge shutdown handling.

# MineLights 2.3.8.4 This release adds Forge configuration menus, refined settings across Minecraft versions, improved reliability of the mod update checker, and fixes issues with the config screen on NeoForge. Previous server version compatible (as of 2.3.1)! ## Key Features & Major Changes - Added Forge configuration menu support, including a built-in settings screen for older Forge versions. - Fixed MineLights settings failing to open on NeoForge 1.21.1 with Mod Menu ([#30](https://github.com/megabytesme/MineLights/issues/30)). - Updated settings menus to show features available in the current Minecraft version. - Fixed update notices being dropped when the Modrinth check finished before a world was joined. ## Installation / Upgrade Instructions - DELETE your old mine-lights-\*.jar file completely. - Download the jar from this release. - Place the new minelights-\*.jar into your mods folder. - Install Cloth Config, here: [https://modrinth.com/mod/cloth-config](https://modrinth.com/mod/cloth-config) - **OpenRGB (optional):** The latest OpenRGB version is recommended. After installing or updating OpenRGB, restart your computer before using MineLights. Start OpenRGB, open the **SDK Server** tab, and click **Start Server**. Keep OpenRGB running while Minecraft is open. MineLights connects to the local server at `127.0.0.1:6742` (the default SDK server address and port). - Run Minecraft. - Using anything which is not OpenRGB? 1. Start Minecraft. 2. Wait for MineLights.exe to finish downloading in the background. 3. If all goes well, you will see a dialog asking you if you want to grant `MineLights.exe` permission to access the internet. 4. After accepting, your supported devices will show red. ## Full Changelog & Technical Details - Added Forge config screen integration across supported releases, with a native screen on older versions that do not use Cloth Config. - Fixed the NeoForge config screen factory for the API signature used by NeoForge 1.21.1, resolving the `AbstractMethodError` reported in [issue #30](https://github.com/megabytesme/MineLights/issues/30). - Reworked legacy Forge settings with separate category tabs, page navigation that stays within the selected tab, and a dedicated About section. - Hid Locator Bar settings before Minecraft 26.1 and End Flash settings before Minecraft 1.21.9 in applicable configuration menus. - Queued Modrinth update notices until a player is available, across Fabric, Quilt, Forge, and NeoForge. - Updated older Fabric version detection and tick callback registration, including the Modrinth update check's Minecraft version lookup. - Corrected Fabric API and Java 8 build settings for Minecraft 1.14.3, and hardened Forge and NeoForge shutdown handling.

# MineLights 2.3.8.4 This release adds Forge configuration menus, refined settings across Minecraft versions, improved reliability of the mod update checker, and fixes issues with the config screen on NeoForge. Previous server version compatible (as of 2.3.1)! ## Key Features & Major Changes - Added Forge configuration menu support, including a built-in settings screen for older Forge versions. - Fixed MineLights settings failing to open on NeoForge 1.21.1 with Mod Menu ([#30](https://github.com/megabytesme/MineLights/issues/30)). - Updated settings menus to show features available in the current Minecraft version. - Fixed update notices being dropped when the Modrinth check finished before a world was joined. ## Installation / Upgrade Instructions - DELETE your old mine-lights-\*.jar file completely. - Download the jar from this release. - Place the new minelights-\*.jar into your mods folder. - Install Cloth Config, here: [https://modrinth.com/mod/cloth-config](https://modrinth.com/mod/cloth-config) - **OpenRGB (optional):** The latest OpenRGB version is recommended. After installing or updating OpenRGB, restart your computer before using MineLights. Start OpenRGB, open the **SDK Server** tab, and click **Start Server**. Keep OpenRGB running while Minecraft is open. MineLights connects to the local server at `127.0.0.1:6742` (the default SDK server address and port). - Run Minecraft. - Using anything which is not OpenRGB? 1. Start Minecraft. 2. Wait for MineLights.exe to finish downloading in the background. 3. If all goes well, you will see a dialog asking you if you want to grant `MineLights.exe` permission to access the internet. 4. After accepting, your supported devices will show red. ## Full Changelog & Technical Details - Added Forge config screen integration across supported releases, with a native screen on older versions that do not use Cloth Config. - Fixed the NeoForge config screen factory for the API signature used by NeoForge 1.21.1, resolving the `AbstractMethodError` reported in [issue #30](https://github.com/megabytesme/MineLights/issues/30). - Reworked legacy Forge settings with separate category tabs, page navigation that stays within the selected tab, and a dedicated About section. - Hid Locator Bar settings before Minecraft 26.1 and End Flash settings before Minecraft 1.21.9 in applicable configuration menus. - Queued Modrinth update notices until a player is available, across Fabric, Quilt, Forge, and NeoForge. - Updated older Fabric version detection and tick callback registration, including the Modrinth update check's Minecraft version lookup. - Corrected Fabric API and Java 8 build settings for Minecraft 1.14.3, and hardened Forge and NeoForge shutdown handling.

# MineLights 2.3.8.4 This release adds Forge configuration menus, refined settings across Minecraft versions, improved reliability of the mod update checker, and fixes issues with the config screen on NeoForge. Previous server version compatible (as of 2.3.1)! ## Key Features & Major Changes - Added Forge configuration menu support, including a built-in settings screen for older Forge versions. - Fixed MineLights settings failing to open on NeoForge 1.21.1 with Mod Menu ([#30](https://github.com/megabytesme/MineLights/issues/30)). - Updated settings menus to show features available in the current Minecraft version. - Fixed update notices being dropped when the Modrinth check finished before a world was joined. ## Installation / Upgrade Instructions - DELETE your old mine-lights-\*.jar file completely. - Download the jar from this release. - Place the new minelights-\*.jar into your mods folder. - Install Cloth Config, here: [https://modrinth.com/mod/cloth-config](https://modrinth.com/mod/cloth-config) - **OpenRGB (optional):** The latest OpenRGB version is recommended. After installing or updating OpenRGB, restart your computer before using MineLights. Start OpenRGB, open the **SDK Server** tab, and click **Start Server**. Keep OpenRGB running while Minecraft is open. MineLights connects to the local server at `127.0.0.1:6742` (the default SDK server address and port). - Run Minecraft. - Using anything which is not OpenRGB? 1. Start Minecraft. 2. Wait for MineLights.exe to finish downloading in the background. 3. If all goes well, you will see a dialog asking you if you want to grant `MineLights.exe` permission to access the internet. 4. After accepting, your supported devices will show red. ## Full Changelog & Technical Details - Added Forge config screen integration across supported releases, with a native screen on older versions that do not use Cloth Config. - Fixed the NeoForge config screen factory for the API signature used by NeoForge 1.21.1, resolving the `AbstractMethodError` reported in [issue #30](https://github.com/megabytesme/MineLights/issues/30). - Reworked legacy Forge settings with separate category tabs, page navigation that stays within the selected tab, and a dedicated About section. - Hid Locator Bar settings before Minecraft 26.1 and End Flash settings before Minecraft 1.21.9 in applicable configuration menus. - Queued Modrinth update notices until a player is available, across Fabric, Quilt, Forge, and NeoForge. - Updated older Fabric version detection and tick callback registration, including the Modrinth update check's Minecraft version lookup. - Corrected Fabric API and Java 8 build settings for Minecraft 1.14.3, and hardened Forge and NeoForge shutdown handling.

# MineLights 2.3.8.4 This release adds Forge configuration menus, refined settings across Minecraft versions, improved reliability of the mod update checker, and fixes issues with the config screen on NeoForge. Previous server version compatible (as of 2.3.1)! ## Key Features & Major Changes - Added Forge configuration menu support, including a built-in settings screen for older Forge versions. - Fixed MineLights settings failing to open on NeoForge 1.21.1 with Mod Menu ([#30](https://github.com/megabytesme/MineLights/issues/30)). - Updated settings menus to show features available in the current Minecraft version. - Fixed update notices being dropped when the Modrinth check finished before a world was joined. ## Installation / Upgrade Instructions - DELETE your old mine-lights-\*.jar file completely. - Download the jar from this release. - Place the new minelights-\*.jar into your mods folder. - Install Cloth Config, here: [https://modrinth.com/mod/cloth-config](https://modrinth.com/mod/cloth-config) - **OpenRGB (optional):** The latest OpenRGB version is recommended. After installing or updating OpenRGB, restart your computer before using MineLights. Start OpenRGB, open the **SDK Server** tab, and click **Start Server**. Keep OpenRGB running while Minecraft is open. MineLights connects to the local server at `127.0.0.1:6742` (the default SDK server address and port). - Run Minecraft. - Using anything which is not OpenRGB? 1. Start Minecraft. 2. Wait for MineLights.exe to finish downloading in the background. 3. If all goes well, you will see a dialog asking you if you want to grant `MineLights.exe` permission to access the internet. 4. After accepting, your supported devices will show red. ## Full Changelog & Technical Details - Added Forge config screen integration across supported releases, with a native screen on older versions that do not use Cloth Config. - Fixed the NeoForge config screen factory for the API signature used by NeoForge 1.21.1, resolving the `AbstractMethodError` reported in [issue #30](https://github.com/megabytesme/MineLights/issues/30). - Reworked legacy Forge settings with separate category tabs, page navigation that stays within the selected tab, and a dedicated About section. - Hid Locator Bar settings before Minecraft 26.1 and End Flash settings before Minecraft 1.21.9 in applicable configuration menus. - Queued Modrinth update notices until a player is available, across Fabric, Quilt, Forge, and NeoForge. - Updated older Fabric version detection and tick callback registration, including the Modrinth update check's Minecraft version lookup. - Corrected Fabric API and Java 8 build settings for Minecraft 1.14.3, and hardened Forge and NeoForge shutdown handling.

# MineLights 2.3.8.4 This release adds Forge configuration menus, refined settings across Minecraft versions, improved reliability of the mod update checker, and fixes issues with the config screen on NeoForge. Previous server version compatible (as of 2.3.1)! ## Key Features & Major Changes - Added Forge configuration menu support, including a built-in settings screen for older Forge versions. - Fixed MineLights settings failing to open on NeoForge 1.21.1 with Mod Menu ([#30](https://github.com/megabytesme/MineLights/issues/30)). - Updated settings menus to show features available in the current Minecraft version. - Fixed update notices being dropped when the Modrinth check finished before a world was joined. ## Installation / Upgrade Instructions - DELETE your old mine-lights-\*.jar file completely. - Download the jar from this release. - Place the new minelights-\*.jar into your mods folder. - Install Cloth Config, here: [https://modrinth.com/mod/cloth-config](https://modrinth.com/mod/cloth-config) - **OpenRGB (optional):** The latest OpenRGB version is recommended. After installing or updating OpenRGB, restart your computer before using MineLights. Start OpenRGB, open the **SDK Server** tab, and click **Start Server**. Keep OpenRGB running while Minecraft is open. MineLights connects to the local server at `127.0.0.1:6742` (the default SDK server address and port). - Run Minecraft. - Using anything which is not OpenRGB? 1. Start Minecraft. 2. Wait for MineLights.exe to finish downloading in the background. 3. If all goes well, you will see a dialog asking you if you want to grant `MineLights.exe` permission to access the internet. 4. After accepting, your supported devices will show red. ## Full Changelog & Technical Details - Added Forge config screen integration across supported releases, with a native screen on older versions that do not use Cloth Config. - Fixed the NeoForge config screen factory for the API signature used by NeoForge 1.21.1, resolving the `AbstractMethodError` reported in [issue #30](https://github.com/megabytesme/MineLights/issues/30). - Reworked legacy Forge settings with separate category tabs, page navigation that stays within the selected tab, and a dedicated About section. - Hid Locator Bar settings before Minecraft 26.1 and End Flash settings before Minecraft 1.21.9 in applicable configuration menus. - Queued Modrinth update notices until a player is available, across Fabric, Quilt, Forge, and NeoForge. - Updated older Fabric version detection and tick callback registration, including the Modrinth update check's Minecraft version lookup. - Corrected Fabric API and Java 8 build settings for Minecraft 1.14.3, and hardened Forge and NeoForge shutdown handling.

# MineLights 2.3.8.4 This release adds Forge configuration menus, refined settings across Minecraft versions, improved reliability of the mod update checker, and fixes issues with the config screen on NeoForge. Previous server version compatible (as of 2.3.1)! ## Key Features & Major Changes - Added Forge configuration menu support, including a built-in settings screen for older Forge versions. - Fixed MineLights settings failing to open on NeoForge 1.21.1 with Mod Menu ([#30](https://github.com/megabytesme/MineLights/issues/30)). - Updated settings menus to show features available in the current Minecraft version. - Fixed update notices being dropped when the Modrinth check finished before a world was joined. ## Installation / Upgrade Instructions - DELETE your old mine-lights-\*.jar file completely. - Download the jar from this release. - Place the new minelights-\*.jar into your mods folder. - Install Cloth Config, here: [https://modrinth.com/mod/cloth-config](https://modrinth.com/mod/cloth-config) - **OpenRGB (optional):** The latest OpenRGB version is recommended. After installing or updating OpenRGB, restart your computer before using MineLights. Start OpenRGB, open the **SDK Server** tab, and click **Start Server**. Keep OpenRGB running while Minecraft is open. MineLights connects to the local server at `127.0.0.1:6742` (the default SDK server address and port). - Run Minecraft. - Using anything which is not OpenRGB? 1. Start Minecraft. 2. Wait for MineLights.exe to finish downloading in the background. 3. If all goes well, you will see a dialog asking you if you want to grant `MineLights.exe` permission to access the internet. 4. After accepting, your supported devices will show red. ## Full Changelog & Technical Details - Added Forge config screen integration across supported releases, with a native screen on older versions that do not use Cloth Config. - Fixed the NeoForge config screen factory for the API signature used by NeoForge 1.21.1, resolving the `AbstractMethodError` reported in [issue #30](https://github.com/megabytesme/MineLights/issues/30). - Reworked legacy Forge settings with separate category tabs, page navigation that stays within the selected tab, and a dedicated About section. - Hid Locator Bar settings before Minecraft 26.1 and End Flash settings before Minecraft 1.21.9 in applicable configuration menus. - Queued Modrinth update notices until a player is available, across Fabric, Quilt, Forge, and NeoForge. - Updated older Fabric version detection and tick callback registration, including the Modrinth update check's Minecraft version lookup. - Corrected Fabric API and Java 8 build settings for Minecraft 1.14.3, and hardened Forge and NeoForge shutdown handling.

# MineLights 2.3.8.4 This release adds Forge configuration menus, refined settings across Minecraft versions, improved reliability of the mod update checker, and fixes issues with the config screen on NeoForge. Previous server version compatible (as of 2.3.1)! ## Key Features & Major Changes - Added Forge configuration menu support, including a built-in settings screen for older Forge versions. - Fixed MineLights settings failing to open on NeoForge 1.21.1 with Mod Menu ([#30](https://github.com/megabytesme/MineLights/issues/30)). - Updated settings menus to show features available in the current Minecraft version. - Fixed update notices being dropped when the Modrinth check finished before a world was joined. ## Installation / Upgrade Instructions - DELETE your old mine-lights-\*.jar file completely. - Download the jar from this release. - Place the new minelights-\*.jar into your mods folder. - Install Cloth Config, here: [https://modrinth.com/mod/cloth-config](https://modrinth.com/mod/cloth-config) - **OpenRGB (optional):** The latest OpenRGB version is recommended. After installing or updating OpenRGB, restart your computer before using MineLights. Start OpenRGB, open the **SDK Server** tab, and click **Start Server**. Keep OpenRGB running while Minecraft is open. MineLights connects to the local server at `127.0.0.1:6742` (the default SDK server address and port). - Run Minecraft. - Using anything which is not OpenRGB? 1. Start Minecraft. 2. Wait for MineLights.exe to finish downloading in the background. 3. If all goes well, you will see a dialog asking you if you want to grant `MineLights.exe` permission to access the internet. 4. After accepting, your supported devices will show red. ## Full Changelog & Technical Details - Added Forge config screen integration across supported releases, with a native screen on older versions that do not use Cloth Config. - Fixed the NeoForge config screen factory for the API signature used by NeoForge 1.21.1, resolving the `AbstractMethodError` reported in [issue #30](https://github.com/megabytesme/MineLights/issues/30). - Reworked legacy Forge settings with separate category tabs, page navigation that stays within the selected tab, and a dedicated About section. - Hid Locator Bar settings before Minecraft 26.1 and End Flash settings before Minecraft 1.21.9 in applicable configuration menus. - Queued Modrinth update notices until a player is available, across Fabric, Quilt, Forge, and NeoForge. - Updated older Fabric version detection and tick callback registration, including the Modrinth update check's Minecraft version lookup. - Corrected Fabric API and Java 8 build settings for Minecraft 1.14.3, and hardened Forge and NeoForge shutdown handling.

# MineLights 2.3.8.4 This release adds Forge configuration menus, refined settings across Minecraft versions, improved reliability of the mod update checker, and fixes issues with the config screen on NeoForge. Previous server version compatible (as of 2.3.1)! ## Key Features & Major Changes - Added Forge configuration menu support, including a built-in settings screen for older Forge versions. - Fixed MineLights settings failing to open on NeoForge 1.21.1 with Mod Menu ([#30](https://github.com/megabytesme/MineLights/issues/30)). - Updated settings menus to show features available in the current Minecraft version. - Fixed update notices being dropped when the Modrinth check finished before a world was joined. ## Installation / Upgrade Instructions - DELETE your old mine-lights-\*.jar file completely. - Download the jar from this release. - Place the new minelights-\*.jar into your mods folder. - Install Cloth Config, here: [https://modrinth.com/mod/cloth-config](https://modrinth.com/mod/cloth-config) - **OpenRGB (optional):** The latest OpenRGB version is recommended. After installing or updating OpenRGB, restart your computer before using MineLights. Start OpenRGB, open the **SDK Server** tab, and click **Start Server**. Keep OpenRGB running while Minecraft is open. MineLights connects to the local server at `127.0.0.1:6742` (the default SDK server address and port). - Run Minecraft. - Using anything which is not OpenRGB? 1. Start Minecraft. 2. Wait for MineLights.exe to finish downloading in the background. 3. If all goes well, you will see a dialog asking you if you want to grant `MineLights.exe` permission to access the internet. 4. After accepting, your supported devices will show red. ## Full Changelog & Technical Details - Added Forge config screen integration across supported releases, with a native screen on older versions that do not use Cloth Config. - Fixed the NeoForge config screen factory for the API signature used by NeoForge 1.21.1, resolving the `AbstractMethodError` reported in [issue #30](https://github.com/megabytesme/MineLights/issues/30). - Reworked legacy Forge settings with separate category tabs, page navigation that stays within the selected tab, and a dedicated About section. - Hid Locator Bar settings before Minecraft 26.1 and End Flash settings before Minecraft 1.21.9 in applicable configuration menus. - Queued Modrinth update notices until a player is available, across Fabric, Quilt, Forge, and NeoForge. - Updated older Fabric version detection and tick callback registration, including the Modrinth update check's Minecraft version lookup. - Corrected Fabric API and Java 8 build settings for Minecraft 1.14.3, and hardened Forge and NeoForge shutdown handling.

# MineLights 2.3.8.4 This release adds Forge configuration menus, refined settings across Minecraft versions, improved reliability of the mod update checker, and fixes issues with the config screen on NeoForge. Previous server version compatible (as of 2.3.1)! ## Key Features & Major Changes - Added Forge configuration menu support, including a built-in settings screen for older Forge versions. - Fixed MineLights settings failing to open on NeoForge 1.21.1 with Mod Menu ([#30](https://github.com/megabytesme/MineLights/issues/30)). - Updated settings menus to show features available in the current Minecraft version. - Fixed update notices being dropped when the Modrinth check finished before a world was joined. ## Installation / Upgrade Instructions - DELETE your old mine-lights-\*.jar file completely. - Download the jar from this release. - Place the new minelights-\*.jar into your mods folder. - Install Cloth Config, here: [https://modrinth.com/mod/cloth-config](https://modrinth.com/mod/cloth-config) - **OpenRGB (optional):** The latest OpenRGB version is recommended. After installing or updating OpenRGB, restart your computer before using MineLights. Start OpenRGB, open the **SDK Server** tab, and click **Start Server**. Keep OpenRGB running while Minecraft is open. MineLights connects to the local server at `127.0.0.1:6742` (the default SDK server address and port). - Run Minecraft. - Using anything which is not OpenRGB? 1. Start Minecraft. 2. Wait for MineLights.exe to finish downloading in the background. 3. If all goes well, you will see a dialog asking you if you want to grant `MineLights.exe` permission to access the internet. 4. After accepting, your supported devices will show red. ## Full Changelog & Technical Details - Added Forge config screen integration across supported releases, with a native screen on older versions that do not use Cloth Config. - Fixed the NeoForge config screen factory for the API signature used by NeoForge 1.21.1, resolving the `AbstractMethodError` reported in [issue #30](https://github.com/megabytesme/MineLights/issues/30). - Reworked legacy Forge settings with separate category tabs, page navigation that stays within the selected tab, and a dedicated About section. - Hid Locator Bar settings before Minecraft 26.1 and End Flash settings before Minecraft 1.21.9 in applicable configuration menus. - Queued Modrinth update notices until a player is available, across Fabric, Quilt, Forge, and NeoForge. - Updated older Fabric version detection and tick callback registration, including the Modrinth update check's Minecraft version lookup. - Corrected Fabric API and Java 8 build settings for Minecraft 1.14.3, and hardened Forge and NeoForge shutdown handling.

# MineLights 2.3.8.4 This release adds Forge configuration menus, refined settings across Minecraft versions, improved reliability of the mod update checker, and fixes issues with the config screen on NeoForge. Previous server version compatible (as of 2.3.1)! ## Key Features & Major Changes - Added Forge configuration menu support, including a built-in settings screen for older Forge versions. - Fixed MineLights settings failing to open on NeoForge 1.21.1 with Mod Menu ([#30](https://github.com/megabytesme/MineLights/issues/30)). - Updated settings menus to show features available in the current Minecraft version. - Fixed update notices being dropped when the Modrinth check finished before a world was joined. ## Installation / Upgrade Instructions - DELETE your old mine-lights-\*.jar file completely. - Download the jar from this release. - Place the new minelights-\*.jar into your mods folder. - Install Cloth Config, here: [https://modrinth.com/mod/cloth-config](https://modrinth.com/mod/cloth-config) - **OpenRGB (optional):** The latest OpenRGB version is recommended. After installing or updating OpenRGB, restart your computer before using MineLights. Start OpenRGB, open the **SDK Server** tab, and click **Start Server**. Keep OpenRGB running while Minecraft is open. MineLights connects to the local server at `127.0.0.1:6742` (the default SDK server address and port). - Run Minecraft. - Using anything which is not OpenRGB? 1. Start Minecraft. 2. Wait for MineLights.exe to finish downloading in the background. 3. If all goes well, you will see a dialog asking you if you want to grant `MineLights.exe` permission to access the internet. 4. After accepting, your supported devices will show red. ## Full Changelog & Technical Details - Added Forge config screen integration across supported releases, with a native screen on older versions that do not use Cloth Config. - Fixed the NeoForge config screen factory for the API signature used by NeoForge 1.21.1, resolving the `AbstractMethodError` reported in [issue #30](https://github.com/megabytesme/MineLights/issues/30). - Reworked legacy Forge settings with separate category tabs, page navigation that stays within the selected tab, and a dedicated About section. - Hid Locator Bar settings before Minecraft 26.1 and End Flash settings before Minecraft 1.21.9 in applicable configuration menus. - Queued Modrinth update notices until a player is available, across Fabric, Quilt, Forge, and NeoForge. - Updated older Fabric version detection and tick callback registration, including the Modrinth update check's Minecraft version lookup. - Corrected Fabric API and Java 8 build settings for Minecraft 1.14.3, and hardened Forge and NeoForge shutdown handling.

# MineLights 2.3.8.4 This release adds Forge configuration menus, refined settings across Minecraft versions, improved reliability of the mod update checker, and fixes issues with the config screen on NeoForge. Previous server version compatible (as of 2.3.1)! ## Key Features & Major Changes - Added Forge configuration menu support, including a built-in settings screen for older Forge versions. - Fixed MineLights settings failing to open on NeoForge 1.21.1 with Mod Menu ([#30](https://github.com/megabytesme/MineLights/issues/30)). - Updated settings menus to show features available in the current Minecraft version. - Fixed update notices being dropped when the Modrinth check finished before a world was joined. ## Installation / Upgrade Instructions - DELETE your old mine-lights-\*.jar file completely. - Download the jar from this release. - Place the new minelights-\*.jar into your mods folder. - Install Cloth Config, here: [https://modrinth.com/mod/cloth-config](https://modrinth.com/mod/cloth-config) - **OpenRGB (optional):** The latest OpenRGB version is recommended. After installing or updating OpenRGB, restart your computer before using MineLights. Start OpenRGB, open the **SDK Server** tab, and click **Start Server**. Keep OpenRGB running while Minecraft is open. MineLights connects to the local server at `127.0.0.1:6742` (the default SDK server address and port). - Run Minecraft. - Using anything which is not OpenRGB? 1. Start Minecraft. 2. Wait for MineLights.exe to finish downloading in the background. 3. If all goes well, you will see a dialog asking you if you want to grant `MineLights.exe` permission to access the internet. 4. After accepting, your supported devices will show red. ## Full Changelog & Technical Details - Added Forge config screen integration across supported releases, with a native screen on older versions that do not use Cloth Config. - Fixed the NeoForge config screen factory for the API signature used by NeoForge 1.21.1, resolving the `AbstractMethodError` reported in [issue #30](https://github.com/megabytesme/MineLights/issues/30). - Reworked legacy Forge settings with separate category tabs, page navigation that stays within the selected tab, and a dedicated About section. - Hid Locator Bar settings before Minecraft 26.1 and End Flash settings before Minecraft 1.21.9 in applicable configuration menus. - Queued Modrinth update notices until a player is available, across Fabric, Quilt, Forge, and NeoForge. - Updated older Fabric version detection and tick callback registration, including the Modrinth update check's Minecraft version lookup. - Corrected Fabric API and Java 8 build settings for Minecraft 1.14.3, and hardened Forge and NeoForge shutdown handling.

# MineLights 2.3.8.4 This release adds Forge configuration menus, refined settings across Minecraft versions, improved reliability of the mod update checker, and fixes issues with the config screen on NeoForge. Previous server version compatible (as of 2.3.1)! ## Key Features & Major Changes - Added Forge configuration menu support, including a built-in settings screen for older Forge versions. - Fixed MineLights settings failing to open on NeoForge 1.21.1 with Mod Menu ([#30](https://github.com/megabytesme/MineLights/issues/30)). - Updated settings menus to show features available in the current Minecraft version. - Fixed update notices being dropped when the Modrinth check finished before a world was joined. ## Installation / Upgrade Instructions - DELETE your old mine-lights-\*.jar file completely. - Download the jar from this release. - Place the new minelights-\*.jar into your mods folder. - Install Cloth Config, here: [https://modrinth.com/mod/cloth-config](https://modrinth.com/mod/cloth-config) - **OpenRGB (optional):** The latest OpenRGB version is recommended. After installing or updating OpenRGB, restart your computer before using MineLights. Start OpenRGB, open the **SDK Server** tab, and click **Start Server**. Keep OpenRGB running while Minecraft is open. MineLights connects to the local server at `127.0.0.1:6742` (the default SDK server address and port). - Run Minecraft. - Using anything which is not OpenRGB? 1. Start Minecraft. 2. Wait for MineLights.exe to finish downloading in the background. 3. If all goes well, you will see a dialog asking you if you want to grant `MineLights.exe` permission to access the internet. 4. After accepting, your supported devices will show red. ## Full Changelog & Technical Details - Added Forge config screen integration across supported releases, with a native screen on older versions that do not use Cloth Config. - Fixed the NeoForge config screen factory for the API signature used by NeoForge 1.21.1, resolving the `AbstractMethodError` reported in [issue #30](https://github.com/megabytesme/MineLights/issues/30). - Reworked legacy Forge settings with separate category tabs, page navigation that stays within the selected tab, and a dedicated About section. - Hid Locator Bar settings before Minecraft 26.1 and End Flash settings before Minecraft 1.21.9 in applicable configuration menus. - Queued Modrinth update notices until a player is available, across Fabric, Quilt, Forge, and NeoForge. - Updated older Fabric version detection and tick callback registration, including the Modrinth update check's Minecraft version lookup. - Corrected Fabric API and Java 8 build settings for Minecraft 1.14.3, and hardened Forge and NeoForge shutdown handling.

# MineLights 2.3.8.4 This release adds Forge configuration menus, refined settings across Minecraft versions, improved reliability of the mod update checker, and fixes issues with the config screen on NeoForge. Previous server version compatible (as of 2.3.1)! ## Key Features & Major Changes - Added Forge configuration menu support, including a built-in settings screen for older Forge versions. - Fixed MineLights settings failing to open on NeoForge 1.21.1 with Mod Menu ([#30](https://github.com/megabytesme/MineLights/issues/30)). - Updated settings menus to show features available in the current Minecraft version. - Fixed update notices being dropped when the Modrinth check finished before a world was joined. ## Installation / Upgrade Instructions - DELETE your old mine-lights-\*.jar file completely. - Download the jar from this release. - Place the new minelights-\*.jar into your mods folder. - Install Cloth Config, here: [https://modrinth.com/mod/cloth-config](https://modrinth.com/mod/cloth-config) - **OpenRGB (optional):** The latest OpenRGB version is recommended. After installing or updating OpenRGB, restart your computer before using MineLights. Start OpenRGB, open the **SDK Server** tab, and click **Start Server**. Keep OpenRGB running while Minecraft is open. MineLights connects to the local server at `127.0.0.1:6742` (the default SDK server address and port). - Run Minecraft. - Using anything which is not OpenRGB? 1. Start Minecraft. 2. Wait for MineLights.exe to finish downloading in the background. 3. If all goes well, you will see a dialog asking you if you want to grant `MineLights.exe` permission to access the internet. 4. After accepting, your supported devices will show red. ## Full Changelog & Technical Details - Added Forge config screen integration across supported releases, with a native screen on older versions that do not use Cloth Config. - Fixed the NeoForge config screen factory for the API signature used by NeoForge 1.21.1, resolving the `AbstractMethodError` reported in [issue #30](https://github.com/megabytesme/MineLights/issues/30). - Reworked legacy Forge settings with separate category tabs, page navigation that stays within the selected tab, and a dedicated About section. - Hid Locator Bar settings before Minecraft 26.1 and End Flash settings before Minecraft 1.21.9 in applicable configuration menus. - Queued Modrinth update notices until a player is available, across Fabric, Quilt, Forge, and NeoForge. - Updated older Fabric version detection and tick callback registration, including the Modrinth update check's Minecraft version lookup. - Corrected Fabric API and Java 8 build settings for Minecraft 1.14.3, and hardened Forge and NeoForge shutdown handling.

# MineLights 2.3.8.4 This release adds Forge configuration menus, refined settings across Minecraft versions, improved reliability of the mod update checker, and fixes issues with the config screen on NeoForge. Previous server version compatible (as of 2.3.1)! ## Key Features & Major Changes - Added Forge configuration menu support, including a built-in settings screen for older Forge versions. - Fixed MineLights settings failing to open on NeoForge 1.21.1 with Mod Menu ([#30](https://github.com/megabytesme/MineLights/issues/30)). - Updated settings menus to show features available in the current Minecraft version. - Fixed update notices being dropped when the Modrinth check finished before a world was joined. ## Installation / Upgrade Instructions - DELETE your old mine-lights-\*.jar file completely. - Download the jar from this release. - Place the new minelights-\*.jar into your mods folder. - Install Cloth Config, here: [https://modrinth.com/mod/cloth-config](https://modrinth.com/mod/cloth-config) - **OpenRGB (optional):** The latest OpenRGB version is recommended. After installing or updating OpenRGB, restart your computer before using MineLights. Start OpenRGB, open the **SDK Server** tab, and click **Start Server**. Keep OpenRGB running while Minecraft is open. MineLights connects to the local server at `127.0.0.1:6742` (the default SDK server address and port). - Run Minecraft. - Using anything which is not OpenRGB? 1. Start Minecraft. 2. Wait for MineLights.exe to finish downloading in the background. 3. If all goes well, you will see a dialog asking you if you want to grant `MineLights.exe` permission to access the internet. 4. After accepting, your supported devices will show red. ## Full Changelog & Technical Details - Added Forge config screen integration across supported releases, with a native screen on older versions that do not use Cloth Config. - Fixed the NeoForge config screen factory for the API signature used by NeoForge 1.21.1, resolving the `AbstractMethodError` reported in [issue #30](https://github.com/megabytesme/MineLights/issues/30). - Reworked legacy Forge settings with separate category tabs, page navigation that stays within the selected tab, and a dedicated About section. - Hid Locator Bar settings before Minecraft 26.1 and End Flash settings before Minecraft 1.21.9 in applicable configuration menus. - Queued Modrinth update notices until a player is available, across Fabric, Quilt, Forge, and NeoForge. - Updated older Fabric version detection and tick callback registration, including the Modrinth update check's Minecraft version lookup. - Corrected Fabric API and Java 8 build settings for Minecraft 1.14.3, and hardened Forge and NeoForge shutdown handling.

# MineLights 2.3.8.4 This release adds Forge configuration menus, refined settings across Minecraft versions, improved reliability of the mod update checker, and fixes issues with the config screen on NeoForge. Previous server version compatible (as of 2.3.1)! ## Key Features & Major Changes - Added Forge configuration menu support, including a built-in settings screen for older Forge versions. - Fixed MineLights settings failing to open on NeoForge 1.21.1 with Mod Menu ([#30](https://github.com/megabytesme/MineLights/issues/30)). - Updated settings menus to show features available in the current Minecraft version. - Fixed update notices being dropped when the Modrinth check finished before a world was joined. ## Installation / Upgrade Instructions - DELETE your old mine-lights-\*.jar file completely. - Download the jar from this release. - Place the new minelights-\*.jar into your mods folder. - Install Cloth Config, here: [https://modrinth.com/mod/cloth-config](https://modrinth.com/mod/cloth-config) - **OpenRGB (optional):** The latest OpenRGB version is recommended. After installing or updating OpenRGB, restart your computer before using MineLights. Start OpenRGB, open the **SDK Server** tab, and click **Start Server**. Keep OpenRGB running while Minecraft is open. MineLights connects to the local server at `127.0.0.1:6742` (the default SDK server address and port). - Run Minecraft. - Using anything which is not OpenRGB? 1. Start Minecraft. 2. Wait for MineLights.exe to finish downloading in the background. 3. If all goes well, you will see a dialog asking you if you want to grant `MineLights.exe` permission to access the internet. 4. After accepting, your supported devices will show red. ## Full Changelog & Technical Details - Added Forge config screen integration across supported releases, with a native screen on older versions that do not use Cloth Config. - Fixed the NeoForge config screen factory for the API signature used by NeoForge 1.21.1, resolving the `AbstractMethodError` reported in [issue #30](https://github.com/megabytesme/MineLights/issues/30). - Reworked legacy Forge settings with separate category tabs, page navigation that stays within the selected tab, and a dedicated About section. - Hid Locator Bar settings before Minecraft 26.1 and End Flash settings before Minecraft 1.21.9 in applicable configuration menus. - Queued Modrinth update notices until a player is available, across Fabric, Quilt, Forge, and NeoForge. - Updated older Fabric version detection and tick callback registration, including the Modrinth update check's Minecraft version lookup. - Corrected Fabric API and Java 8 build settings for Minecraft 1.14.3, and hardened Forge and NeoForge shutdown handling.

# MineLights 2.3.8.4 This release adds Forge configuration menus, refined settings across Minecraft versions, improved reliability of the mod update checker, and fixes issues with the config screen on NeoForge. Previous server version compatible (as of 2.3.1)! ## Key Features & Major Changes - Added Forge configuration menu support, including a built-in settings screen for older Forge versions. - Fixed MineLights settings failing to open on NeoForge 1.21.1 with Mod Menu ([#30](https://github.com/megabytesme/MineLights/issues/30)). - Updated settings menus to show features available in the current Minecraft version. - Fixed update notices being dropped when the Modrinth check finished before a world was joined. ## Installation / Upgrade Instructions - DELETE your old mine-lights-\*.jar file completely. - Download the jar from this release. - Place the new minelights-\*.jar into your mods folder. - Install Cloth Config, here: [https://modrinth.com/mod/cloth-config](https://modrinth.com/mod/cloth-config) - **OpenRGB (optional):** The latest OpenRGB version is recommended. After installing or updating OpenRGB, restart your computer before using MineLights. Start OpenRGB, open the **SDK Server** tab, and click **Start Server**. Keep OpenRGB running while Minecraft is open. MineLights connects to the local server at `127.0.0.1:6742` (the default SDK server address and port). - Run Minecraft. - Using anything which is not OpenRGB? 1. Start Minecraft. 2. Wait for MineLights.exe to finish downloading in the background. 3. If all goes well, you will see a dialog asking you if you want to grant `MineLights.exe` permission to access the internet. 4. After accepting, your supported devices will show red. ## Full Changelog & Technical Details - Added Forge config screen integration across supported releases, with a native screen on older versions that do not use Cloth Config. - Fixed the NeoForge config screen factory for the API signature used by NeoForge 1.21.1, resolving the `AbstractMethodError` reported in [issue #30](https://github.com/megabytesme/MineLights/issues/30). - Reworked legacy Forge settings with separate category tabs, page navigation that stays within the selected tab, and a dedicated About section. - Hid Locator Bar settings before Minecraft 26.1 and End Flash settings before Minecraft 1.21.9 in applicable configuration menus. - Queued Modrinth update notices until a player is available, across Fabric, Quilt, Forge, and NeoForge. - Updated older Fabric version detection and tick callback registration, including the Modrinth update check's Minecraft version lookup. - Corrected Fabric API and Java 8 build settings for Minecraft 1.14.3, and hardened Forge and NeoForge shutdown handling.

# MineLights 2.3.8.4 This release adds Forge configuration menus, refined settings across Minecraft versions, improved reliability of the mod update checker, and fixes issues with the config screen on NeoForge. Previous server version compatible (as of 2.3.1)! ## Key Features & Major Changes - Added Forge configuration menu support, including a built-in settings screen for older Forge versions. - Fixed MineLights settings failing to open on NeoForge 1.21.1 with Mod Menu ([#30](https://github.com/megabytesme/MineLights/issues/30)). - Updated settings menus to show features available in the current Minecraft version. - Fixed update notices being dropped when the Modrinth check finished before a world was joined. ## Installation / Upgrade Instructions - DELETE your old mine-lights-\*.jar file completely. - Download the jar from this release. - Place the new minelights-\*.jar into your mods folder. - Install Cloth Config, here: [https://modrinth.com/mod/cloth-config](https://modrinth.com/mod/cloth-config) - **OpenRGB (optional):** The latest OpenRGB version is recommended. After installing or updating OpenRGB, restart your computer before using MineLights. Start OpenRGB, open the **SDK Server** tab, and click **Start Server**. Keep OpenRGB running while Minecraft is open. MineLights connects to the local server at `127.0.0.1:6742` (the default SDK server address and port). - Run Minecraft. - Using anything which is not OpenRGB? 1. Start Minecraft. 2. Wait for MineLights.exe to finish downloading in the background. 3. If all goes well, you will see a dialog asking you if you want to grant `MineLights.exe` permission to access the internet. 4. After accepting, your supported devices will show red. ## Full Changelog & Technical Details - Added Forge config screen integration across supported releases, with a native screen on older versions that do not use Cloth Config. - Fixed the NeoForge config screen factory for the API signature used by NeoForge 1.21.1, resolving the `AbstractMethodError` reported in [issue #30](https://github.com/megabytesme/MineLights/issues/30). - Reworked legacy Forge settings with separate category tabs, page navigation that stays within the selected tab, and a dedicated About section. - Hid Locator Bar settings before Minecraft 26.1 and End Flash settings before Minecraft 1.21.9 in applicable configuration menus. - Queued Modrinth update notices until a player is available, across Fabric, Quilt, Forge, and NeoForge. - Updated older Fabric version detection and tick callback registration, including the Modrinth update check's Minecraft version lookup. - Corrected Fabric API and Java 8 build settings for Minecraft 1.14.3, and hardened Forge and NeoForge shutdown handling.

# MineLights 2.3.8.4 This release adds Forge configuration menus, refined settings across Minecraft versions, improved reliability of the mod update checker, and fixes issues with the config screen on NeoForge. Previous server version compatible (as of 2.3.1)! ## Key Features & Major Changes - Added Forge configuration menu support, including a built-in settings screen for older Forge versions. - Fixed MineLights settings failing to open on NeoForge 1.21.1 with Mod Menu ([#30](https://github.com/megabytesme/MineLights/issues/30)). - Updated settings menus to show features available in the current Minecraft version. - Fixed update notices being dropped when the Modrinth check finished before a world was joined. ## Installation / Upgrade Instructions - DELETE your old mine-lights-\*.jar file completely. - Download the jar from this release. - Place the new minelights-\*.jar into your mods folder. - Install Cloth Config, here: [https://modrinth.com/mod/cloth-config](https://modrinth.com/mod/cloth-config) - **OpenRGB (optional):** The latest OpenRGB version is recommended. After installing or updating OpenRGB, restart your computer before using MineLights. Start OpenRGB, open the **SDK Server** tab, and click **Start Server**. Keep OpenRGB running while Minecraft is open. MineLights connects to the local server at `127.0.0.1:6742` (the default SDK server address and port). - Run Minecraft. - Using anything which is not OpenRGB? 1. Start Minecraft. 2. Wait for MineLights.exe to finish downloading in the background. 3. If all goes well, you will see a dialog asking you if you want to grant `MineLights.exe` permission to access the internet. 4. After accepting, your supported devices will show red. ## Full Changelog & Technical Details - Added Forge config screen integration across supported releases, with a native screen on older versions that do not use Cloth Config. - Fixed the NeoForge config screen factory for the API signature used by NeoForge 1.21.1, resolving the `AbstractMethodError` reported in [issue #30](https://github.com/megabytesme/MineLights/issues/30). - Reworked legacy Forge settings with separate category tabs, page navigation that stays within the selected tab, and a dedicated About section. - Hid Locator Bar settings before Minecraft 26.1 and End Flash settings before Minecraft 1.21.9 in applicable configuration menus. - Queued Modrinth update notices until a player is available, across Fabric, Quilt, Forge, and NeoForge. - Updated older Fabric version detection and tick callback registration, including the Modrinth update check's Minecraft version lookup. - Corrected Fabric API and Java 8 build settings for Minecraft 1.14.3, and hardened Forge and NeoForge shutdown handling.

# MineLights 2.3.8.4 This release adds Forge configuration menus, refined settings across Minecraft versions, improved reliability of the mod update checker, and fixes issues with the config screen on NeoForge. Previous server version compatible (as of 2.3.1)! ## Key Features & Major Changes - Added Forge configuration menu support, including a built-in settings screen for older Forge versions. - Fixed MineLights settings failing to open on NeoForge 1.21.1 with Mod Menu ([#30](https://github.com/megabytesme/MineLights/issues/30)). - Updated settings menus to show features available in the current Minecraft version. - Fixed update notices being dropped when the Modrinth check finished before a world was joined. ## Installation / Upgrade Instructions - DELETE your old mine-lights-\*.jar file completely. - Download the jar from this release. - Place the new minelights-\*.jar into your mods folder. - Install Cloth Config, here: [https://modrinth.com/mod/cloth-config](https://modrinth.com/mod/cloth-config) - **OpenRGB (optional):** The latest OpenRGB version is recommended. After installing or updating OpenRGB, restart your computer before using MineLights. Start OpenRGB, open the **SDK Server** tab, and click **Start Server**. Keep OpenRGB running while Minecraft is open. MineLights connects to the local server at `127.0.0.1:6742` (the default SDK server address and port). - Run Minecraft. - Using anything which is not OpenRGB? 1. Start Minecraft. 2. Wait for MineLights.exe to finish downloading in the background. 3. If all goes well, you will see a dialog asking you if you want to grant `MineLights.exe` permission to access the internet. 4. After accepting, your supported devices will show red. ## Full Changelog & Technical Details - Added Forge config screen integration across supported releases, with a native screen on older versions that do not use Cloth Config. - Fixed the NeoForge config screen factory for the API signature used by NeoForge 1.21.1, resolving the `AbstractMethodError` reported in [issue #30](https://github.com/megabytesme/MineLights/issues/30). - Reworked legacy Forge settings with separate category tabs, page navigation that stays within the selected tab, and a dedicated About section. - Hid Locator Bar settings before Minecraft 26.1 and End Flash settings before Minecraft 1.21.9 in applicable configuration menus. - Queued Modrinth update notices until a player is available, across Fabric, Quilt, Forge, and NeoForge. - Updated older Fabric version detection and tick callback registration, including the Modrinth update check's Minecraft version lookup. - Corrected Fabric API and Java 8 build settings for Minecraft 1.14.3, and hardened Forge and NeoForge shutdown handling.

# MineLights 2.3.8.4 This release adds Forge configuration menus, refined settings across Minecraft versions, improved reliability of the mod update checker, and fixes issues with the config screen on NeoForge. Previous server version compatible (as of 2.3.1)! ## Key Features & Major Changes - Added Forge configuration menu support, including a built-in settings screen for older Forge versions. - Fixed MineLights settings failing to open on NeoForge 1.21.1 with Mod Menu ([#30](https://github.com/megabytesme/MineLights/issues/30)). - Updated settings menus to show features available in the current Minecraft version. - Fixed update notices being dropped when the Modrinth check finished before a world was joined. ## Installation / Upgrade Instructions - DELETE your old mine-lights-\*.jar file completely. - Download the jar from this release. - Place the new minelights-\*.jar into your mods folder. - Install Cloth Config, here: [https://modrinth.com/mod/cloth-config](https://modrinth.com/mod/cloth-config) - **OpenRGB (optional):** The latest OpenRGB version is recommended. After installing or updating OpenRGB, restart your computer before using MineLights. Start OpenRGB, open the **SDK Server** tab, and click **Start Server**. Keep OpenRGB running while Minecraft is open. MineLights connects to the local server at `127.0.0.1:6742` (the default SDK server address and port). - Run Minecraft. - Using anything which is not OpenRGB? 1. Start Minecraft. 2. Wait for MineLights.exe to finish downloading in the background. 3. If all goes well, you will see a dialog asking you if you want to grant `MineLights.exe` permission to access the internet. 4. After accepting, your supported devices will show red. ## Full Changelog & Technical Details - Added Forge config screen integration across supported releases, with a native screen on older versions that do not use Cloth Config. - Fixed the NeoForge config screen factory for the API signature used by NeoForge 1.21.1, resolving the `AbstractMethodError` reported in [issue #30](https://github.com/megabytesme/MineLights/issues/30). - Reworked legacy Forge settings with separate category tabs, page navigation that stays within the selected tab, and a dedicated About section. - Hid Locator Bar settings before Minecraft 26.1 and End Flash settings before Minecraft 1.21.9 in applicable configuration menus. - Queued Modrinth update notices until a player is available, across Fabric, Quilt, Forge, and NeoForge. - Updated older Fabric version detection and tick callback registration, including the Modrinth update check's Minecraft version lookup. - Corrected Fabric API and Java 8 build settings for Minecraft 1.14.3, and hardened Forge and NeoForge shutdown handling.

# MineLights 2.3.8.4 This release adds Forge configuration menus, refined settings across Minecraft versions, improved reliability of the mod update checker, and fixes issues with the config screen on NeoForge. Previous server version compatible (as of 2.3.1)! ## Key Features & Major Changes - Added Forge configuration menu support, including a built-in settings screen for older Forge versions. - Fixed MineLights settings failing to open on NeoForge 1.21.1 with Mod Menu ([#30](https://github.com/megabytesme/MineLights/issues/30)). - Updated settings menus to show features available in the current Minecraft version. - Fixed update notices being dropped when the Modrinth check finished before a world was joined. ## Installation / Upgrade Instructions - DELETE your old mine-lights-\*.jar file completely. - Download the jar from this release. - Place the new minelights-\*.jar into your mods folder. - Install Cloth Config, here: [https://modrinth.com/mod/cloth-config](https://modrinth.com/mod/cloth-config) - **OpenRGB (optional):** The latest OpenRGB version is recommended. After installing or updating OpenRGB, restart your computer before using MineLights. Start OpenRGB, open the **SDK Server** tab, and click **Start Server**. Keep OpenRGB running while Minecraft is open. MineLights connects to the local server at `127.0.0.1:6742` (the default SDK server address and port). - Run Minecraft. - Using anything which is not OpenRGB? 1. Start Minecraft. 2. Wait for MineLights.exe to finish downloading in the background. 3. If all goes well, you will see a dialog asking you if you want to grant `MineLights.exe` permission to access the internet. 4. After accepting, your supported devices will show red. ## Full Changelog & Technical Details - Added Forge config screen integration across supported releases, with a native screen on older versions that do not use Cloth Config. - Fixed the NeoForge config screen factory for the API signature used by NeoForge 1.21.1, resolving the `AbstractMethodError` reported in [issue #30](https://github.com/megabytesme/MineLights/issues/30). - Reworked legacy Forge settings with separate category tabs, page navigation that stays within the selected tab, and a dedicated About section. - Hid Locator Bar settings before Minecraft 26.1 and End Flash settings before Minecraft 1.21.9 in applicable configuration menus. - Queued Modrinth update notices until a player is available, across Fabric, Quilt, Forge, and NeoForge. - Updated older Fabric version detection and tick callback registration, including the Modrinth update check's Minecraft version lookup. - Corrected Fabric API and Java 8 build settings for Minecraft 1.14.3, and hardened Forge and NeoForge shutdown handling.

# MineLights 2.3.8.4 This release adds Forge configuration menus, refined settings across Minecraft versions, improved reliability of the mod update checker, and fixes issues with the config screen on NeoForge. Previous server version compatible (as of 2.3.1)! ## Key Features & Major Changes - Added Forge configuration menu support, including a built-in settings screen for older Forge versions. - Fixed MineLights settings failing to open on NeoForge 1.21.1 with Mod Menu ([#30](https://github.com/megabytesme/MineLights/issues/30)). - Updated settings menus to show features available in the current Minecraft version. - Fixed update notices being dropped when the Modrinth check finished before a world was joined. ## Installation / Upgrade Instructions - DELETE your old mine-lights-\*.jar file completely. - Download the jar from this release. - Place the new minelights-\*.jar into your mods folder. - Install Cloth Config, here: [https://modrinth.com/mod/cloth-config](https://modrinth.com/mod/cloth-config) - **OpenRGB (optional):** The latest OpenRGB version is recommended. After installing or updating OpenRGB, restart your computer before using MineLights. Start OpenRGB, open the **SDK Server** tab, and click **Start Server**. Keep OpenRGB running while Minecraft is open. MineLights connects to the local server at `127.0.0.1:6742` (the default SDK server address and port). - Run Minecraft. - Using anything which is not OpenRGB? 1. Start Minecraft. 2. Wait for MineLights.exe to finish downloading in the background. 3. If all goes well, you will see a dialog asking you if you want to grant `MineLights.exe` permission to access the internet. 4. After accepting, your supported devices will show red. ## Full Changelog & Technical Details - Added Forge config screen integration across supported releases, with a native screen on older versions that do not use Cloth Config. - Fixed the NeoForge config screen factory for the API signature used by NeoForge 1.21.1, resolving the `AbstractMethodError` reported in [issue #30](https://github.com/megabytesme/MineLights/issues/30). - Reworked legacy Forge settings with separate category tabs, page navigation that stays within the selected tab, and a dedicated About section. - Hid Locator Bar settings before Minecraft 26.1 and End Flash settings before Minecraft 1.21.9 in applicable configuration menus. - Queued Modrinth update notices until a player is available, across Fabric, Quilt, Forge, and NeoForge. - Updated older Fabric version detection and tick callback registration, including the Modrinth update check's Minecraft version lookup. - Corrected Fabric API and Java 8 build settings for Minecraft 1.14.3, and hardened Forge and NeoForge shutdown handling.

# MineLights 2.3.8.4 This release adds Forge configuration menus, refined settings across Minecraft versions, improved reliability of the mod update checker, and fixes issues with the config screen on NeoForge. Previous server version compatible (as of 2.3.1)! ## Key Features & Major Changes - Added Forge configuration menu support, including a built-in settings screen for older Forge versions. - Fixed MineLights settings failing to open on NeoForge 1.21.1 with Mod Menu ([#30](https://github.com/megabytesme/MineLights/issues/30)). - Updated settings menus to show features available in the current Minecraft version. - Fixed update notices being dropped when the Modrinth check finished before a world was joined. ## Installation / Upgrade Instructions - DELETE your old mine-lights-\*.jar file completely. - Download the jar from this release. - Place the new minelights-\*.jar into your mods folder. - Install Cloth Config, here: [https://modrinth.com/mod/cloth-config](https://modrinth.com/mod/cloth-config) - **OpenRGB (optional):** The latest OpenRGB version is recommended. After installing or updating OpenRGB, restart your computer before using MineLights. Start OpenRGB, open the **SDK Server** tab, and click **Start Server**. Keep OpenRGB running while Minecraft is open. MineLights connects to the local server at `127.0.0.1:6742` (the default SDK server address and port). - Run Minecraft. - Using anything which is not OpenRGB? 1. Start Minecraft. 2. Wait for MineLights.exe to finish downloading in the background. 3. If all goes well, you will see a dialog asking you if you want to grant `MineLights.exe` permission to access the internet. 4. After accepting, your supported devices will show red. ## Full Changelog & Technical Details - Added Forge config screen integration across supported releases, with a native screen on older versions that do not use Cloth Config. - Fixed the NeoForge config screen factory for the API signature used by NeoForge 1.21.1, resolving the `AbstractMethodError` reported in [issue #30](https://github.com/megabytesme/MineLights/issues/30). - Reworked legacy Forge settings with separate category tabs, page navigation that stays within the selected tab, and a dedicated About section. - Hid Locator Bar settings before Minecraft 26.1 and End Flash settings before Minecraft 1.21.9 in applicable configuration menus. - Queued Modrinth update notices until a player is available, across Fabric, Quilt, Forge, and NeoForge. - Updated older Fabric version detection and tick callback registration, including the Modrinth update check's Minecraft version lookup. - Corrected Fabric API and Java 8 build settings for Minecraft 1.14.3, and hardened Forge and NeoForge shutdown handling.

# MineLights 2.3.8.4 This release adds Forge configuration menus, refined settings across Minecraft versions, improved reliability of the mod update checker, and fixes issues with the config screen on NeoForge. Previous server version compatible (as of 2.3.1)! ## Key Features & Major Changes - Added Forge configuration menu support, including a built-in settings screen for older Forge versions. - Fixed MineLights settings failing to open on NeoForge 1.21.1 with Mod Menu ([#30](https://github.com/megabytesme/MineLights/issues/30)). - Updated settings menus to show features available in the current Minecraft version. - Fixed update notices being dropped when the Modrinth check finished before a world was joined. ## Installation / Upgrade Instructions - DELETE your old mine-lights-\*.jar file completely. - Download the jar from this release. - Place the new minelights-\*.jar into your mods folder. - Install Cloth Config, here: [https://modrinth.com/mod/cloth-config](https://modrinth.com/mod/cloth-config) - **OpenRGB (optional):** The latest OpenRGB version is recommended. After installing or updating OpenRGB, restart your computer before using MineLights. Start OpenRGB, open the **SDK Server** tab, and click **Start Server**. Keep OpenRGB running while Minecraft is open. MineLights connects to the local server at `127.0.0.1:6742` (the default SDK server address and port). - Run Minecraft. - Using anything which is not OpenRGB? 1. Start Minecraft. 2. Wait for MineLights.exe to finish downloading in the background. 3. If all goes well, you will see a dialog asking you if you want to grant `MineLights.exe` permission to access the internet. 4. After accepting, your supported devices will show red. ## Full Changelog & Technical Details - Added Forge config screen integration across supported releases, with a native screen on older versions that do not use Cloth Config. - Fixed the NeoForge config screen factory for the API signature used by NeoForge 1.21.1, resolving the `AbstractMethodError` reported in [issue #30](https://github.com/megabytesme/MineLights/issues/30). - Reworked legacy Forge settings with separate category tabs, page navigation that stays within the selected tab, and a dedicated About section. - Hid Locator Bar settings before Minecraft 26.1 and End Flash settings before Minecraft 1.21.9 in applicable configuration menus. - Queued Modrinth update notices until a player is available, across Fabric, Quilt, Forge, and NeoForge. - Updated older Fabric version detection and tick callback registration, including the Modrinth update check's Minecraft version lookup. - Corrected Fabric API and Java 8 build settings for Minecraft 1.14.3, and hardened Forge and NeoForge shutdown handling.

# MineLights 2.3.8.4 This release adds Forge configuration menus, refined settings across Minecraft versions, improved reliability of the mod update checker, and fixes issues with the config screen on NeoForge. Previous server version compatible (as of 2.3.1)! ## Key Features & Major Changes - Added Forge configuration menu support, including a built-in settings screen for older Forge versions. - Fixed MineLights settings failing to open on NeoForge 1.21.1 with Mod Menu ([#30](https://github.com/megabytesme/MineLights/issues/30)). - Updated settings menus to show features available in the current Minecraft version. - Fixed update notices being dropped when the Modrinth check finished before a world was joined. ## Installation / Upgrade Instructions - DELETE your old mine-lights-\*.jar file completely. - Download the jar from this release. - Place the new minelights-\*.jar into your mods folder. - Install Cloth Config, here: [https://modrinth.com/mod/cloth-config](https://modrinth.com/mod/cloth-config) - **OpenRGB (optional):** The latest OpenRGB version is recommended. After installing or updating OpenRGB, restart your computer before using MineLights. Start OpenRGB, open the **SDK Server** tab, and click **Start Server**. Keep OpenRGB running while Minecraft is open. MineLights connects to the local server at `127.0.0.1:6742` (the default SDK server address and port). - Run Minecraft. - Using anything which is not OpenRGB? 1. Start Minecraft. 2. Wait for MineLights.exe to finish downloading in the background. 3. If all goes well, you will see a dialog asking you if you want to grant `MineLights.exe` permission to access the internet. 4. After accepting, your supported devices will show red. ## Full Changelog & Technical Details - Added Forge config screen integration across supported releases, with a native screen on older versions that do not use Cloth Config. - Fixed the NeoForge config screen factory for the API signature used by NeoForge 1.21.1, resolving the `AbstractMethodError` reported in [issue #30](https://github.com/megabytesme/MineLights/issues/30). - Reworked legacy Forge settings with separate category tabs, page navigation that stays within the selected tab, and a dedicated About section. - Hid Locator Bar settings before Minecraft 26.1 and End Flash settings before Minecraft 1.21.9 in applicable configuration menus. - Queued Modrinth update notices until a player is available, across Fabric, Quilt, Forge, and NeoForge. - Updated older Fabric version detection and tick callback registration, including the Modrinth update check's Minecraft version lookup. - Corrected Fabric API and Java 8 build settings for Minecraft 1.14.3, and hardened Forge and NeoForge shutdown handling.

# MineLights 2.3.8.4 This release adds Forge configuration menus, refined settings across Minecraft versions, improved reliability of the mod update checker, and fixes issues with the config screen on NeoForge. Previous server version compatible (as of 2.3.1)! ## Key Features & Major Changes - Added Forge configuration menu support, including a built-in settings screen for older Forge versions. - Fixed MineLights settings failing to open on NeoForge 1.21.1 with Mod Menu ([#30](https://github.com/megabytesme/MineLights/issues/30)). - Updated settings menus to show features available in the current Minecraft version. - Fixed update notices being dropped when the Modrinth check finished before a world was joined. ## Installation / Upgrade Instructions - DELETE your old mine-lights-\*.jar file completely. - Download the jar from this release. - Place the new minelights-\*.jar into your mods folder. - Install Cloth Config, here: [https://modrinth.com/mod/cloth-config](https://modrinth.com/mod/cloth-config) - **OpenRGB (optional):** The latest OpenRGB version is recommended. After installing or updating OpenRGB, restart your computer before using MineLights. Start OpenRGB, open the **SDK Server** tab, and click **Start Server**. Keep OpenRGB running while Minecraft is open. MineLights connects to the local server at `127.0.0.1:6742` (the default SDK server address and port). - Run Minecraft. - Using anything which is not OpenRGB? 1. Start Minecraft. 2. Wait for MineLights.exe to finish downloading in the background. 3. If all goes well, you will see a dialog asking you if you want to grant `MineLights.exe` permission to access the internet. 4. After accepting, your supported devices will show red. ## Full Changelog & Technical Details - Added Forge config screen integration across supported releases, with a native screen on older versions that do not use Cloth Config. - Fixed the NeoForge config screen factory for the API signature used by NeoForge 1.21.1, resolving the `AbstractMethodError` reported in [issue #30](https://github.com/megabytesme/MineLights/issues/30). - Reworked legacy Forge settings with separate category tabs, page navigation that stays within the selected tab, and a dedicated About section. - Hid Locator Bar settings before Minecraft 26.1 and End Flash settings before Minecraft 1.21.9 in applicable configuration menus. - Queued Modrinth update notices until a player is available, across Fabric, Quilt, Forge, and NeoForge. - Updated older Fabric version detection and tick callback registration, including the Modrinth update check's Minecraft version lookup. - Corrected Fabric API and Java 8 build settings for Minecraft 1.14.3, and hardened Forge and NeoForge shutdown handling.

# MineLights 2.3.8.4 This release adds Forge configuration menus, refined settings across Minecraft versions, improved reliability of the mod update checker, and fixes issues with the config screen on NeoForge. Previous server version compatible (as of 2.3.1)! ## Key Features & Major Changes - Added Forge configuration menu support, including a built-in settings screen for older Forge versions. - Fixed MineLights settings failing to open on NeoForge 1.21.1 with Mod Menu ([#30](https://github.com/megabytesme/MineLights/issues/30)). - Updated settings menus to show features available in the current Minecraft version. - Fixed update notices being dropped when the Modrinth check finished before a world was joined. ## Installation / Upgrade Instructions - DELETE your old mine-lights-\*.jar file completely. - Download the jar from this release. - Place the new minelights-\*.jar into your mods folder. - Install Cloth Config, here: [https://modrinth.com/mod/cloth-config](https://modrinth.com/mod/cloth-config) - **OpenRGB (optional):** The latest OpenRGB version is recommended. After installing or updating OpenRGB, restart your computer before using MineLights. Start OpenRGB, open the **SDK Server** tab, and click **Start Server**. Keep OpenRGB running while Minecraft is open. MineLights connects to the local server at `127.0.0.1:6742` (the default SDK server address and port). - Run Minecraft. - Using anything which is not OpenRGB? 1. Start Minecraft. 2. Wait for MineLights.exe to finish downloading in the background. 3. If all goes well, you will see a dialog asking you if you want to grant `MineLights.exe` permission to access the internet. 4. After accepting, your supported devices will show red. ## Full Changelog & Technical Details - Added Forge config screen integration across supported releases, with a native screen on older versions that do not use Cloth Config. - Fixed the NeoForge config screen factory for the API signature used by NeoForge 1.21.1, resolving the `AbstractMethodError` reported in [issue #30](https://github.com/megabytesme/MineLights/issues/30). - Reworked legacy Forge settings with separate category tabs, page navigation that stays within the selected tab, and a dedicated About section. - Hid Locator Bar settings before Minecraft 26.1 and End Flash settings before Minecraft 1.21.9 in applicable configuration menus. - Queued Modrinth update notices until a player is available, across Fabric, Quilt, Forge, and NeoForge. - Updated older Fabric version detection and tick callback registration, including the Modrinth update check's Minecraft version lookup. - Corrected Fabric API and Java 8 build settings for Minecraft 1.14.3, and hardened Forge and NeoForge shutdown handling.

# MineLights 2.3.8.4 This release adds Forge configuration menus, refined settings across Minecraft versions, improved reliability of the mod update checker, and fixes issues with the config screen on NeoForge. Previous server version compatible (as of 2.3.1)! ## Key Features & Major Changes - Added Forge configuration menu support, including a built-in settings screen for older Forge versions. - Fixed MineLights settings failing to open on NeoForge 1.21.1 with Mod Menu ([#30](https://github.com/megabytesme/MineLights/issues/30)). - Updated settings menus to show features available in the current Minecraft version. - Fixed update notices being dropped when the Modrinth check finished before a world was joined. ## Installation / Upgrade Instructions - DELETE your old mine-lights-\*.jar file completely. - Download the jar from this release. - Place the new minelights-\*.jar into your mods folder. - Install Cloth Config, here: [https://modrinth.com/mod/cloth-config](https://modrinth.com/mod/cloth-config) - **OpenRGB (optional):** The latest OpenRGB version is recommended. After installing or updating OpenRGB, restart your computer before using MineLights. Start OpenRGB, open the **SDK Server** tab, and click **Start Server**. Keep OpenRGB running while Minecraft is open. MineLights connects to the local server at `127.0.0.1:6742` (the default SDK server address and port). - Run Minecraft. - Using anything which is not OpenRGB? 1. Start Minecraft. 2. Wait for MineLights.exe to finish downloading in the background. 3. If all goes well, you will see a dialog asking you if you want to grant `MineLights.exe` permission to access the internet. 4. After accepting, your supported devices will show red. ## Full Changelog & Technical Details - Added Forge config screen integration across supported releases, with a native screen on older versions that do not use Cloth Config. - Fixed the NeoForge config screen factory for the API signature used by NeoForge 1.21.1, resolving the `AbstractMethodError` reported in [issue #30](https://github.com/megabytesme/MineLights/issues/30). - Reworked legacy Forge settings with separate category tabs, page navigation that stays within the selected tab, and a dedicated About section. - Hid Locator Bar settings before Minecraft 26.1 and End Flash settings before Minecraft 1.21.9 in applicable configuration menus. - Queued Modrinth update notices until a player is available, across Fabric, Quilt, Forge, and NeoForge. - Updated older Fabric version detection and tick callback registration, including the Modrinth update check's Minecraft version lookup. - Corrected Fabric API and Java 8 build settings for Minecraft 1.14.3, and hardened Forge and NeoForge shutdown handling.

# MineLights 2.3.8.4 This release adds Forge configuration menus, refined settings across Minecraft versions, improved reliability of the mod update checker, and fixes issues with the config screen on NeoForge. Previous server version compatible (as of 2.3.1)! ## Key Features & Major Changes - Added Forge configuration menu support, including a built-in settings screen for older Forge versions. - Fixed MineLights settings failing to open on NeoForge 1.21.1 with Mod Menu ([#30](https://github.com/megabytesme/MineLights/issues/30)). - Updated settings menus to show features available in the current Minecraft version. - Fixed update notices being dropped when the Modrinth check finished before a world was joined. ## Installation / Upgrade Instructions - DELETE your old mine-lights-\*.jar file completely. - Download the jar from this release. - Place the new minelights-\*.jar into your mods folder. - Install Cloth Config, here: [https://modrinth.com/mod/cloth-config](https://modrinth.com/mod/cloth-config) - **OpenRGB (optional):** The latest OpenRGB version is recommended. After installing or updating OpenRGB, restart your computer before using MineLights. Start OpenRGB, open the **SDK Server** tab, and click **Start Server**. Keep OpenRGB running while Minecraft is open. MineLights connects to the local server at `127.0.0.1:6742` (the default SDK server address and port). - Run Minecraft. - Using anything which is not OpenRGB? 1. Start Minecraft. 2. Wait for MineLights.exe to finish downloading in the background. 3. If all goes well, you will see a dialog asking you if you want to grant `MineLights.exe` permission to access the internet. 4. After accepting, your supported devices will show red. ## Full Changelog & Technical Details - Added Forge config screen integration across supported releases, with a native screen on older versions that do not use Cloth Config. - Fixed the NeoForge config screen factory for the API signature used by NeoForge 1.21.1, resolving the `AbstractMethodError` reported in [issue #30](https://github.com/megabytesme/MineLights/issues/30). - Reworked legacy Forge settings with separate category tabs, page navigation that stays within the selected tab, and a dedicated About section. - Hid Locator Bar settings before Minecraft 26.1 and End Flash settings before Minecraft 1.21.9 in applicable configuration menus. - Queued Modrinth update notices until a player is available, across Fabric, Quilt, Forge, and NeoForge. - Updated older Fabric version detection and tick callback registration, including the Modrinth update check's Minecraft version lookup. - Corrected Fabric API and Java 8 build settings for Minecraft 1.14.3, and hardened Forge and NeoForge shutdown handling.

# MineLights 2.3.8.4 This release adds Forge configuration menus, refined settings across Minecraft versions, improved reliability of the mod update checker, and fixes issues with the config screen on NeoForge. Previous server version compatible (as of 2.3.1)! ## Key Features & Major Changes - Added Forge configuration menu support, including a built-in settings screen for older Forge versions. - Fixed MineLights settings failing to open on NeoForge 1.21.1 with Mod Menu ([#30](https://github.com/megabytesme/MineLights/issues/30)). - Updated settings menus to show features available in the current Minecraft version. - Fixed update notices being dropped when the Modrinth check finished before a world was joined. ## Installation / Upgrade Instructions - DELETE your old mine-lights-\*.jar file completely. - Download the jar from this release. - Place the new minelights-\*.jar into your mods folder. - Install Cloth Config, here: [https://modrinth.com/mod/cloth-config](https://modrinth.com/mod/cloth-config) - **OpenRGB (optional):** The latest OpenRGB version is recommended. After installing or updating OpenRGB, restart your computer before using MineLights. Start OpenRGB, open the **SDK Server** tab, and click **Start Server**. Keep OpenRGB running while Minecraft is open. MineLights connects to the local server at `127.0.0.1:6742` (the default SDK server address and port). - Run Minecraft. - Using anything which is not OpenRGB? 1. Start Minecraft. 2. Wait for MineLights.exe to finish downloading in the background. 3. If all goes well, you will see a dialog asking you if you want to grant `MineLights.exe` permission to access the internet. 4. After accepting, your supported devices will show red. ## Full Changelog & Technical Details - Added Forge config screen integration across supported releases, with a native screen on older versions that do not use Cloth Config. - Fixed the NeoForge config screen factory for the API signature used by NeoForge 1.21.1, resolving the `AbstractMethodError` reported in [issue #30](https://github.com/megabytesme/MineLights/issues/30). - Reworked legacy Forge settings with separate category tabs, page navigation that stays within the selected tab, and a dedicated About section. - Hid Locator Bar settings before Minecraft 26.1 and End Flash settings before Minecraft 1.21.9 in applicable configuration menus. - Queued Modrinth update notices until a player is available, across Fabric, Quilt, Forge, and NeoForge. - Updated older Fabric version detection and tick callback registration, including the Modrinth update check's Minecraft version lookup. - Corrected Fabric API and Java 8 build settings for Minecraft 1.14.3, and hardened Forge and NeoForge shutdown handling.

# MineLights 2.3.8.4 This release adds Forge configuration menus, refined settings across Minecraft versions, improved reliability of the mod update checker, and fixes issues with the config screen on NeoForge. Previous server version compatible (as of 2.3.1)! ## Key Features & Major Changes - Added Forge configuration menu support, including a built-in settings screen for older Forge versions. - Fixed MineLights settings failing to open on NeoForge 1.21.1 with Mod Menu ([#30](https://github.com/megabytesme/MineLights/issues/30)). - Updated settings menus to show features available in the current Minecraft version. - Fixed update notices being dropped when the Modrinth check finished before a world was joined. ## Installation / Upgrade Instructions - DELETE your old mine-lights-\*.jar file completely. - Download the jar from this release. - Place the new minelights-\*.jar into your mods folder. - Install Cloth Config, here: [https://modrinth.com/mod/cloth-config](https://modrinth.com/mod/cloth-config) - **OpenRGB (optional):** The latest OpenRGB version is recommended. After installing or updating OpenRGB, restart your computer before using MineLights. Start OpenRGB, open the **SDK Server** tab, and click **Start Server**. Keep OpenRGB running while Minecraft is open. MineLights connects to the local server at `127.0.0.1:6742` (the default SDK server address and port). - Run Minecraft. - Using anything which is not OpenRGB? 1. Start Minecraft. 2. Wait for MineLights.exe to finish downloading in the background. 3. If all goes well, you will see a dialog asking you if you want to grant `MineLights.exe` permission to access the internet. 4. After accepting, your supported devices will show red. ## Full Changelog & Technical Details - Added Forge config screen integration across supported releases, with a native screen on older versions that do not use Cloth Config. - Fixed the NeoForge config screen factory for the API signature used by NeoForge 1.21.1, resolving the `AbstractMethodError` reported in [issue #30](https://github.com/megabytesme/MineLights/issues/30). - Reworked legacy Forge settings with separate category tabs, page navigation that stays within the selected tab, and a dedicated About section. - Hid Locator Bar settings before Minecraft 26.1 and End Flash settings before Minecraft 1.21.9 in applicable configuration menus. - Queued Modrinth update notices until a player is available, across Fabric, Quilt, Forge, and NeoForge. - Updated older Fabric version detection and tick callback registration, including the Modrinth update check's Minecraft version lookup. - Corrected Fabric API and Java 8 build settings for Minecraft 1.14.3, and hardened Forge and NeoForge shutdown handling.

# MineLights 2.3.8.4 This release adds Forge configuration menus, refined settings across Minecraft versions, improved reliability of the mod update checker, and fixes issues with the config screen on NeoForge. Previous server version compatible (as of 2.3.1)! ## Key Features & Major Changes - Added Forge configuration menu support, including a built-in settings screen for older Forge versions. - Fixed MineLights settings failing to open on NeoForge 1.21.1 with Mod Menu ([#30](https://github.com/megabytesme/MineLights/issues/30)). - Updated settings menus to show features available in the current Minecraft version. - Fixed update notices being dropped when the Modrinth check finished before a world was joined. ## Installation / Upgrade Instructions - DELETE your old mine-lights-\*.jar file completely. - Download the jar from this release. - Place the new minelights-\*.jar into your mods folder. - Install Cloth Config, here: [https://modrinth.com/mod/cloth-config](https://modrinth.com/mod/cloth-config) - **OpenRGB (optional):** The latest OpenRGB version is recommended. After installing or updating OpenRGB, restart your computer before using MineLights. Start OpenRGB, open the **SDK Server** tab, and click **Start Server**. Keep OpenRGB running while Minecraft is open. MineLights connects to the local server at `127.0.0.1:6742` (the default SDK server address and port). - Run Minecraft. - Using anything which is not OpenRGB? 1. Start Minecraft. 2. Wait for MineLights.exe to finish downloading in the background. 3. If all goes well, you will see a dialog asking you if you want to grant `MineLights.exe` permission to access the internet. 4. After accepting, your supported devices will show red. ## Full Changelog & Technical Details - Added Forge config screen integration across supported releases, with a native screen on older versions that do not use Cloth Config. - Fixed the NeoForge config screen factory for the API signature used by NeoForge 1.21.1, resolving the `AbstractMethodError` reported in [issue #30](https://github.com/megabytesme/MineLights/issues/30). - Reworked legacy Forge settings with separate category tabs, page navigation that stays within the selected tab, and a dedicated About section. - Hid Locator Bar settings before Minecraft 26.1 and End Flash settings before Minecraft 1.21.9 in applicable configuration menus. - Queued Modrinth update notices until a player is available, across Fabric, Quilt, Forge, and NeoForge. - Updated older Fabric version detection and tick callback registration, including the Modrinth update check's Minecraft version lookup. - Corrected Fabric API and Java 8 build settings for Minecraft 1.14.3, and hardened Forge and NeoForge shutdown handling.

# MineLights 2.3.8.4 This release adds Forge configuration menus, refined settings across Minecraft versions, improved reliability of the mod update checker, and fixes issues with the config screen on NeoForge. Previous server version compatible (as of 2.3.1)! ## Key Features & Major Changes - Added Forge configuration menu support, including a built-in settings screen for older Forge versions. - Fixed MineLights settings failing to open on NeoForge 1.21.1 with Mod Menu ([#30](https://github.com/megabytesme/MineLights/issues/30)). - Updated settings menus to show features available in the current Minecraft version. - Fixed update notices being dropped when the Modrinth check finished before a world was joined. ## Installation / Upgrade Instructions - DELETE your old mine-lights-\*.jar file completely. - Download the jar from this release. - Place the new minelights-\*.jar into your mods folder. - Install Cloth Config, here: [https://modrinth.com/mod/cloth-config](https://modrinth.com/mod/cloth-config) - **OpenRGB (optional):** The latest OpenRGB version is recommended. After installing or updating OpenRGB, restart your computer before using MineLights. Start OpenRGB, open the **SDK Server** tab, and click **Start Server**. Keep OpenRGB running while Minecraft is open. MineLights connects to the local server at `127.0.0.1:6742` (the default SDK server address and port). - Run Minecraft. - Using anything which is not OpenRGB? 1. Start Minecraft. 2. Wait for MineLights.exe to finish downloading in the background. 3. If all goes well, you will see a dialog asking you if you want to grant `MineLights.exe` permission to access the internet. 4. After accepting, your supported devices will show red. ## Full Changelog & Technical Details - Added Forge config screen integration across supported releases, with a native screen on older versions that do not use Cloth Config. - Fixed the NeoForge config screen factory for the API signature used by NeoForge 1.21.1, resolving the `AbstractMethodError` reported in [issue #30](https://github.com/megabytesme/MineLights/issues/30). - Reworked legacy Forge settings with separate category tabs, page navigation that stays within the selected tab, and a dedicated About section. - Hid Locator Bar settings before Minecraft 26.1 and End Flash settings before Minecraft 1.21.9 in applicable configuration menus. - Queued Modrinth update notices until a player is available, across Fabric, Quilt, Forge, and NeoForge. - Updated older Fabric version detection and tick callback registration, including the Modrinth update check's Minecraft version lookup. - Corrected Fabric API and Java 8 build settings for Minecraft 1.14.3, and hardened Forge and NeoForge shutdown handling.

# MineLights 2.3.8.4 This release adds Forge configuration menus, refined settings across Minecraft versions, improved reliability of the mod update checker, and fixes issues with the config screen on NeoForge. Previous server version compatible (as of 2.3.1)! ## Key Features & Major Changes - Added Forge configuration menu support, including a built-in settings screen for older Forge versions. - Fixed MineLights settings failing to open on NeoForge 1.21.1 with Mod Menu ([#30](https://github.com/megabytesme/MineLights/issues/30)). - Updated settings menus to show features available in the current Minecraft version. - Fixed update notices being dropped when the Modrinth check finished before a world was joined. ## Installation / Upgrade Instructions - DELETE your old mine-lights-\*.jar file completely. - Download the jar from this release. - Place the new minelights-\*.jar into your mods folder. - Install Cloth Config, here: [https://modrinth.com/mod/cloth-config](https://modrinth.com/mod/cloth-config) - **OpenRGB (optional):** The latest OpenRGB version is recommended. After installing or updating OpenRGB, restart your computer before using MineLights. Start OpenRGB, open the **SDK Server** tab, and click **Start Server**. Keep OpenRGB running while Minecraft is open. MineLights connects to the local server at `127.0.0.1:6742` (the default SDK server address and port). - Run Minecraft. - Using anything which is not OpenRGB? 1. Start Minecraft. 2. Wait for MineLights.exe to finish downloading in the background. 3. If all goes well, you will see a dialog asking you if you want to grant `MineLights.exe` permission to access the internet. 4. After accepting, your supported devices will show red. ## Full Changelog & Technical Details - Added Forge config screen integration across supported releases, with a native screen on older versions that do not use Cloth Config. - Fixed the NeoForge config screen factory for the API signature used by NeoForge 1.21.1, resolving the `AbstractMethodError` reported in [issue #30](https://github.com/megabytesme/MineLights/issues/30). - Reworked legacy Forge settings with separate category tabs, page navigation that stays within the selected tab, and a dedicated About section. - Hid Locator Bar settings before Minecraft 26.1 and End Flash settings before Minecraft 1.21.9 in applicable configuration menus. - Queued Modrinth update notices until a player is available, across Fabric, Quilt, Forge, and NeoForge. - Updated older Fabric version detection and tick callback registration, including the Modrinth update check's Minecraft version lookup. - Corrected Fabric API and Java 8 build settings for Minecraft 1.14.3, and hardened Forge and NeoForge shutdown handling.

# MineLights 2.3.8.4 This release adds Forge configuration menus, refined settings across Minecraft versions, improved reliability of the mod update checker, and fixes issues with the config screen on NeoForge. Previous server version compatible (as of 2.3.1)! ## Key Features & Major Changes - Added Forge configuration menu support, including a built-in settings screen for older Forge versions. - Fixed MineLights settings failing to open on NeoForge 1.21.1 with Mod Menu ([#30](https://github.com/megabytesme/MineLights/issues/30)). - Updated settings menus to show features available in the current Minecraft version. - Fixed update notices being dropped when the Modrinth check finished before a world was joined. ## Installation / Upgrade Instructions - DELETE your old mine-lights-\*.jar file completely. - Download the jar from this release. - Place the new minelights-\*.jar into your mods folder. - Install Cloth Config, here: [https://modrinth.com/mod/cloth-config](https://modrinth.com/mod/cloth-config) - **OpenRGB (optional):** The latest OpenRGB version is recommended. After installing or updating OpenRGB, restart your computer before using MineLights. Start OpenRGB, open the **SDK Server** tab, and click **Start Server**. Keep OpenRGB running while Minecraft is open. MineLights connects to the local server at `127.0.0.1:6742` (the default SDK server address and port). - Run Minecraft. - Using anything which is not OpenRGB? 1. Start Minecraft. 2. Wait for MineLights.exe to finish downloading in the background. 3. If all goes well, you will see a dialog asking you if you want to grant `MineLights.exe` permission to access the internet. 4. After accepting, your supported devices will show red. ## Full Changelog & Technical Details - Added Forge config screen integration across supported releases, with a native screen on older versions that do not use Cloth Config. - Fixed the NeoForge config screen factory for the API signature used by NeoForge 1.21.1, resolving the `AbstractMethodError` reported in [issue #30](https://github.com/megabytesme/MineLights/issues/30). - Reworked legacy Forge settings with separate category tabs, page navigation that stays within the selected tab, and a dedicated About section. - Hid Locator Bar settings before Minecraft 26.1 and End Flash settings before Minecraft 1.21.9 in applicable configuration menus. - Queued Modrinth update notices until a player is available, across Fabric, Quilt, Forge, and NeoForge. - Updated older Fabric version detection and tick callback registration, including the Modrinth update check's Minecraft version lookup. - Corrected Fabric API and Java 8 build settings for Minecraft 1.14.3, and hardened Forge and NeoForge shutdown handling.

# MineLights 2.3.8.4 This release adds Forge configuration menus, refined settings across Minecraft versions, improved reliability of the mod update checker, and fixes issues with the config screen on NeoForge. Previous server version compatible (as of 2.3.1)! ## Key Features & Major Changes - Added Forge configuration menu support, including a built-in settings screen for older Forge versions. - Fixed MineLights settings failing to open on NeoForge 1.21.1 with Mod Menu ([#30](https://github.com/megabytesme/MineLights/issues/30)). - Updated settings menus to show features available in the current Minecraft version. - Fixed update notices being dropped when the Modrinth check finished before a world was joined. ## Installation / Upgrade Instructions - DELETE your old mine-lights-\*.jar file completely. - Download the jar from this release. - Place the new minelights-\*.jar into your mods folder. - Install Cloth Config, here: [https://modrinth.com/mod/cloth-config](https://modrinth.com/mod/cloth-config) - **OpenRGB (optional):** The latest OpenRGB version is recommended. After installing or updating OpenRGB, restart your computer before using MineLights. Start OpenRGB, open the **SDK Server** tab, and click **Start Server**. Keep OpenRGB running while Minecraft is open. MineLights connects to the local server at `127.0.0.1:6742` (the default SDK server address and port). - Run Minecraft. - Using anything which is not OpenRGB? 1. Start Minecraft. 2. Wait for MineLights.exe to finish downloading in the background. 3. If all goes well, you will see a dialog asking you if you want to grant `MineLights.exe` permission to access the internet. 4. After accepting, your supported devices will show red. ## Full Changelog & Technical Details - Added Forge config screen integration across supported releases, with a native screen on older versions that do not use Cloth Config. - Fixed the NeoForge config screen factory for the API signature used by NeoForge 1.21.1, resolving the `AbstractMethodError` reported in [issue #30](https://github.com/megabytesme/MineLights/issues/30). - Reworked legacy Forge settings with separate category tabs, page navigation that stays within the selected tab, and a dedicated About section. - Hid Locator Bar settings before Minecraft 26.1 and End Flash settings before Minecraft 1.21.9 in applicable configuration menus. - Queued Modrinth update notices until a player is available, across Fabric, Quilt, Forge, and NeoForge. - Updated older Fabric version detection and tick callback registration, including the Modrinth update check's Minecraft version lookup. - Corrected Fabric API and Java 8 build settings for Minecraft 1.14.3, and hardened Forge and NeoForge shutdown handling.

# MineLights 2.3.8.4 This release adds Forge configuration menus, refined settings across Minecraft versions, improved reliability of the mod update checker, and fixes issues with the config screen on NeoForge. Previous server version compatible (as of 2.3.1)! ## Key Features & Major Changes - Added Forge configuration menu support, including a built-in settings screen for older Forge versions. - Fixed MineLights settings failing to open on NeoForge 1.21.1 with Mod Menu ([#30](https://github.com/megabytesme/MineLights/issues/30)). - Updated settings menus to show features available in the current Minecraft version. - Fixed update notices being dropped when the Modrinth check finished before a world was joined. ## Installation / Upgrade Instructions - DELETE your old mine-lights-\*.jar file completely. - Download the jar from this release. - Place the new minelights-\*.jar into your mods folder. - Install Cloth Config, here: [https://modrinth.com/mod/cloth-config](https://modrinth.com/mod/cloth-config) - **OpenRGB (optional):** The latest OpenRGB version is recommended. After installing or updating OpenRGB, restart your computer before using MineLights. Start OpenRGB, open the **SDK Server** tab, and click **Start Server**. Keep OpenRGB running while Minecraft is open. MineLights connects to the local server at `127.0.0.1:6742` (the default SDK server address and port). - Run Minecraft. - Using anything which is not OpenRGB? 1. Start Minecraft. 2. Wait for MineLights.exe to finish downloading in the background. 3. If all goes well, you will see a dialog asking you if you want to grant `MineLights.exe` permission to access the internet. 4. After accepting, your supported devices will show red. ## Full Changelog & Technical Details - Added Forge config screen integration across supported releases, with a native screen on older versions that do not use Cloth Config. - Fixed the NeoForge config screen factory for the API signature used by NeoForge 1.21.1, resolving the `AbstractMethodError` reported in [issue #30](https://github.com/megabytesme/MineLights/issues/30). - Reworked legacy Forge settings with separate category tabs, page navigation that stays within the selected tab, and a dedicated About section. - Hid Locator Bar settings before Minecraft 26.1 and End Flash settings before Minecraft 1.21.9 in applicable configuration menus. - Queued Modrinth update notices until a player is available, across Fabric, Quilt, Forge, and NeoForge. - Updated older Fabric version detection and tick callback registration, including the Modrinth update check's Minecraft version lookup. - Corrected Fabric API and Java 8 build settings for Minecraft 1.14.3, and hardened Forge and NeoForge shutdown handling.

# MineLights 2.3.8.4 This release adds Forge configuration menus, refined settings across Minecraft versions, improved reliability of the mod update checker, and fixes issues with the config screen on NeoForge. Previous server version compatible (as of 2.3.1)! ## Key Features & Major Changes - Added Forge configuration menu support, including a built-in settings screen for older Forge versions. - Fixed MineLights settings failing to open on NeoForge 1.21.1 with Mod Menu ([#30](https://github.com/megabytesme/MineLights/issues/30)). - Updated settings menus to show features available in the current Minecraft version. - Fixed update notices being dropped when the Modrinth check finished before a world was joined. ## Installation / Upgrade Instructions - DELETE your old mine-lights-\*.jar file completely. - Download the jar from this release. - Place the new minelights-\*.jar into your mods folder. - Install Cloth Config, here: [https://modrinth.com/mod/cloth-config](https://modrinth.com/mod/cloth-config) - **OpenRGB (optional):** The latest OpenRGB version is recommended. After installing or updating OpenRGB, restart your computer before using MineLights. Start OpenRGB, open the **SDK Server** tab, and click **Start Server**. Keep OpenRGB running while Minecraft is open. MineLights connects to the local server at `127.0.0.1:6742` (the default SDK server address and port). - Run Minecraft. - Using anything which is not OpenRGB? 1. Start Minecraft. 2. Wait for MineLights.exe to finish downloading in the background. 3. If all goes well, you will see a dialog asking you if you want to grant `MineLights.exe` permission to access the internet. 4. After accepting, your supported devices will show red. ## Full Changelog & Technical Details - Added Forge config screen integration across supported releases, with a native screen on older versions that do not use Cloth Config. - Fixed the NeoForge config screen factory for the API signature used by NeoForge 1.21.1, resolving the `AbstractMethodError` reported in [issue #30](https://github.com/megabytesme/MineLights/issues/30). - Reworked legacy Forge settings with separate category tabs, page navigation that stays within the selected tab, and a dedicated About section. - Hid Locator Bar settings before Minecraft 26.1 and End Flash settings before Minecraft 1.21.9 in applicable configuration menus. - Queued Modrinth update notices until a player is available, across Fabric, Quilt, Forge, and NeoForge. - Updated older Fabric version detection and tick callback registration, including the Modrinth update check's Minecraft version lookup. - Corrected Fabric API and Java 8 build settings for Minecraft 1.14.3, and hardened Forge and NeoForge shutdown handling.

# MineLights 2.3.8.4 This release adds Forge configuration menus, refined settings across Minecraft versions, improved reliability of the mod update checker, and fixes issues with the config screen on NeoForge. Previous server version compatible (as of 2.3.1)! ## Key Features & Major Changes - Added Forge configuration menu support, including a built-in settings screen for older Forge versions. - Fixed MineLights settings failing to open on NeoForge 1.21.1 with Mod Menu ([#30](https://github.com/megabytesme/MineLights/issues/30)). - Updated settings menus to show features available in the current Minecraft version. - Fixed update notices being dropped when the Modrinth check finished before a world was joined. ## Installation / Upgrade Instructions - DELETE your old mine-lights-\*.jar file completely. - Download the jar from this release. - Place the new minelights-\*.jar into your mods folder. - Install Cloth Config, here: [https://modrinth.com/mod/cloth-config](https://modrinth.com/mod/cloth-config) - **OpenRGB (optional):** The latest OpenRGB version is recommended. After installing or updating OpenRGB, restart your computer before using MineLights. Start OpenRGB, open the **SDK Server** tab, and click **Start Server**. Keep OpenRGB running while Minecraft is open. MineLights connects to the local server at `127.0.0.1:6742` (the default SDK server address and port). - Run Minecraft. - Using anything which is not OpenRGB? 1. Start Minecraft. 2. Wait for MineLights.exe to finish downloading in the background. 3. If all goes well, you will see a dialog asking you if you want to grant `MineLights.exe` permission to access the internet. 4. After accepting, your supported devices will show red. ## Full Changelog & Technical Details - Added Forge config screen integration across supported releases, with a native screen on older versions that do not use Cloth Config. - Fixed the NeoForge config screen factory for the API signature used by NeoForge 1.21.1, resolving the `AbstractMethodError` reported in [issue #30](https://github.com/megabytesme/MineLights/issues/30). - Reworked legacy Forge settings with separate category tabs, page navigation that stays within the selected tab, and a dedicated About section. - Hid Locator Bar settings before Minecraft 26.1 and End Flash settings before Minecraft 1.21.9 in applicable configuration menus. - Queued Modrinth update notices until a player is available, across Fabric, Quilt, Forge, and NeoForge. - Updated older Fabric version detection and tick callback registration, including the Modrinth update check's Minecraft version lookup. - Corrected Fabric API and Java 8 build settings for Minecraft 1.14.3, and hardened Forge and NeoForge shutdown handling.

# MineLights 2.3.8.4 This release adds Forge configuration menus, refined settings across Minecraft versions, improved reliability of the mod update checker, and fixes issues with the config screen on NeoForge. Previous server version compatible (as of 2.3.1)! ## Key Features & Major Changes - Added Forge configuration menu support, including a built-in settings screen for older Forge versions. - Fixed MineLights settings failing to open on NeoForge 1.21.1 with Mod Menu ([#30](https://github.com/megabytesme/MineLights/issues/30)). - Updated settings menus to show features available in the current Minecraft version. - Fixed update notices being dropped when the Modrinth check finished before a world was joined. ## Installation / Upgrade Instructions - DELETE your old mine-lights-\*.jar file completely. - Download the jar from this release. - Place the new minelights-\*.jar into your mods folder. - Install Cloth Config, here: [https://modrinth.com/mod/cloth-config](https://modrinth.com/mod/cloth-config) - **OpenRGB (optional):** The latest OpenRGB version is recommended. After installing or updating OpenRGB, restart your computer before using MineLights. Start OpenRGB, open the **SDK Server** tab, and click **Start Server**. Keep OpenRGB running while Minecraft is open. MineLights connects to the local server at `127.0.0.1:6742` (the default SDK server address and port). - Run Minecraft. - Using anything which is not OpenRGB? 1. Start Minecraft. 2. Wait for MineLights.exe to finish downloading in the background. 3. If all goes well, you will see a dialog asking you if you want to grant `MineLights.exe` permission to access the internet. 4. After accepting, your supported devices will show red. ## Full Changelog & Technical Details - Added Forge config screen integration across supported releases, with a native screen on older versions that do not use Cloth Config. - Fixed the NeoForge config screen factory for the API signature used by NeoForge 1.21.1, resolving the `AbstractMethodError` reported in [issue #30](https://github.com/megabytesme/MineLights/issues/30). - Reworked legacy Forge settings with separate category tabs, page navigation that stays within the selected tab, and a dedicated About section. - Hid Locator Bar settings before Minecraft 26.1 and End Flash settings before Minecraft 1.21.9 in applicable configuration menus. - Queued Modrinth update notices until a player is available, across Fabric, Quilt, Forge, and NeoForge. - Updated older Fabric version detection and tick callback registration, including the Modrinth update check's Minecraft version lookup. - Corrected Fabric API and Java 8 build settings for Minecraft 1.14.3, and hardened Forge and NeoForge shutdown handling.

# MineLights 2.3.8.4 This release adds Forge configuration menus, refined settings across Minecraft versions, improved reliability of the mod update checker, and fixes issues with the config screen on NeoForge. Previous server version compatible (as of 2.3.1)! ## Key Features & Major Changes - Added Forge configuration menu support, including a built-in settings screen for older Forge versions. - Fixed MineLights settings failing to open on NeoForge 1.21.1 with Mod Menu ([#30](https://github.com/megabytesme/MineLights/issues/30)). - Updated settings menus to show features available in the current Minecraft version. - Fixed update notices being dropped when the Modrinth check finished before a world was joined. ## Installation / Upgrade Instructions - DELETE your old mine-lights-\*.jar file completely. - Download the jar from this release. - Place the new minelights-\*.jar into your mods folder. - Install Cloth Config, here: [https://modrinth.com/mod/cloth-config](https://modrinth.com/mod/cloth-config) - **OpenRGB (optional):** The latest OpenRGB version is recommended. After installing or updating OpenRGB, restart your computer before using MineLights. Start OpenRGB, open the **SDK Server** tab, and click **Start Server**. Keep OpenRGB running while Minecraft is open. MineLights connects to the local server at `127.0.0.1:6742` (the default SDK server address and port). - Run Minecraft. - Using anything which is not OpenRGB? 1. Start Minecraft. 2. Wait for MineLights.exe to finish downloading in the background. 3. If all goes well, you will see a dialog asking you if you want to grant `MineLights.exe` permission to access the internet. 4. After accepting, your supported devices will show red. ## Full Changelog & Technical Details - Added Forge config screen integration across supported releases, with a native screen on older versions that do not use Cloth Config. - Fixed the NeoForge config screen factory for the API signature used by NeoForge 1.21.1, resolving the `AbstractMethodError` reported in [issue #30](https://github.com/megabytesme/MineLights/issues/30). - Reworked legacy Forge settings with separate category tabs, page navigation that stays within the selected tab, and a dedicated About section. - Hid Locator Bar settings before Minecraft 26.1 and End Flash settings before Minecraft 1.21.9 in applicable configuration menus. - Queued Modrinth update notices until a player is available, across Fabric, Quilt, Forge, and NeoForge. - Updated older Fabric version detection and tick callback registration, including the Modrinth update check's Minecraft version lookup. - Corrected Fabric API and Java 8 build settings for Minecraft 1.14.3, and hardened Forge and NeoForge shutdown handling.

# MineLights 2.3.8.4 This release adds Forge configuration menus, refined settings across Minecraft versions, improved reliability of the mod update checker, and fixes issues with the config screen on NeoForge. Previous server version compatible (as of 2.3.1)! ## Key Features & Major Changes - Added Forge configuration menu support, including a built-in settings screen for older Forge versions. - Fixed MineLights settings failing to open on NeoForge 1.21.1 with Mod Menu ([#30](https://github.com/megabytesme/MineLights/issues/30)). - Updated settings menus to show features available in the current Minecraft version. - Fixed update notices being dropped when the Modrinth check finished before a world was joined. ## Installation / Upgrade Instructions - DELETE your old mine-lights-\*.jar file completely. - Download the jar from this release. - Place the new minelights-\*.jar into your mods folder. - Install Cloth Config, here: [https://modrinth.com/mod/cloth-config](https://modrinth.com/mod/cloth-config) - **OpenRGB (optional):** The latest OpenRGB version is recommended. After installing or updating OpenRGB, restart your computer before using MineLights. Start OpenRGB, open the **SDK Server** tab, and click **Start Server**. Keep OpenRGB running while Minecraft is open. MineLights connects to the local server at `127.0.0.1:6742` (the default SDK server address and port). - Run Minecraft. - Using anything which is not OpenRGB? 1. Start Minecraft. 2. Wait for MineLights.exe to finish downloading in the background. 3. If all goes well, you will see a dialog asking you if you want to grant `MineLights.exe` permission to access the internet. 4. After accepting, your supported devices will show red. ## Full Changelog & Technical Details - Added Forge config screen integration across supported releases, with a native screen on older versions that do not use Cloth Config. - Fixed the NeoForge config screen factory for the API signature used by NeoForge 1.21.1, resolving the `AbstractMethodError` reported in [issue #30](https://github.com/megabytesme/MineLights/issues/30). - Reworked legacy Forge settings with separate category tabs, page navigation that stays within the selected tab, and a dedicated About section. - Hid Locator Bar settings before Minecraft 26.1 and End Flash settings before Minecraft 1.21.9 in applicable configuration menus. - Queued Modrinth update notices until a player is available, across Fabric, Quilt, Forge, and NeoForge. - Updated older Fabric version detection and tick callback registration, including the Modrinth update check's Minecraft version lookup. - Corrected Fabric API and Java 8 build settings for Minecraft 1.14.3, and hardened Forge and NeoForge shutdown handling.

# MineLights 2.3.8.4 This release adds Forge configuration menus, refined settings across Minecraft versions, improved reliability of the mod update checker, and fixes issues with the config screen on NeoForge. Previous server version compatible (as of 2.3.1)! ## Key Features & Major Changes - Added Forge configuration menu support, including a built-in settings screen for older Forge versions. - Fixed MineLights settings failing to open on NeoForge 1.21.1 with Mod Menu ([#30](https://github.com/megabytesme/MineLights/issues/30)). - Updated settings menus to show features available in the current Minecraft version. - Fixed update notices being dropped when the Modrinth check finished before a world was joined. ## Installation / Upgrade Instructions - DELETE your old mine-lights-\*.jar file completely. - Download the jar from this release. - Place the new minelights-\*.jar into your mods folder. - Install Cloth Config, here: [https://modrinth.com/mod/cloth-config](https://modrinth.com/mod/cloth-config) - **OpenRGB (optional):** The latest OpenRGB version is recommended. After installing or updating OpenRGB, restart your computer before using MineLights. Start OpenRGB, open the **SDK Server** tab, and click **Start Server**. Keep OpenRGB running while Minecraft is open. MineLights connects to the local server at `127.0.0.1:6742` (the default SDK server address and port). - Run Minecraft. - Using anything which is not OpenRGB? 1. Start Minecraft. 2. Wait for MineLights.exe to finish downloading in the background. 3. If all goes well, you will see a dialog asking you if you want to grant `MineLights.exe` permission to access the internet. 4. After accepting, your supported devices will show red. ## Full Changelog & Technical Details - Added Forge config screen integration across supported releases, with a native screen on older versions that do not use Cloth Config. - Fixed the NeoForge config screen factory for the API signature used by NeoForge 1.21.1, resolving the `AbstractMethodError` reported in [issue #30](https://github.com/megabytesme/MineLights/issues/30). - Reworked legacy Forge settings with separate category tabs, page navigation that stays within the selected tab, and a dedicated About section. - Hid Locator Bar settings before Minecraft 26.1 and End Flash settings before Minecraft 1.21.9 in applicable configuration menus. - Queued Modrinth update notices until a player is available, across Fabric, Quilt, Forge, and NeoForge. - Updated older Fabric version detection and tick callback registration, including the Modrinth update check's Minecraft version lookup. - Corrected Fabric API and Java 8 build settings for Minecraft 1.14.3, and hardened Forge and NeoForge shutdown handling.

# MineLights 2.3.8.4 This release adds Forge configuration menus, refined settings across Minecraft versions, improved reliability of the mod update checker, and fixes issues with the config screen on NeoForge. Previous server version compatible (as of 2.3.1)! ## Key Features & Major Changes - Added Forge configuration menu support, including a built-in settings screen for older Forge versions. - Fixed MineLights settings failing to open on NeoForge 1.21.1 with Mod Menu ([#30](https://github.com/megabytesme/MineLights/issues/30)). - Updated settings menus to show features available in the current Minecraft version. - Fixed update notices being dropped when the Modrinth check finished before a world was joined. ## Installation / Upgrade Instructions - DELETE your old mine-lights-\*.jar file completely. - Download the jar from this release. - Place the new minelights-\*.jar into your mods folder. - Install Cloth Config, here: [https://modrinth.com/mod/cloth-config](https://modrinth.com/mod/cloth-config) - **OpenRGB (optional):** The latest OpenRGB version is recommended. After installing or updating OpenRGB, restart your computer before using MineLights. Start OpenRGB, open the **SDK Server** tab, and click **Start Server**. Keep OpenRGB running while Minecraft is open. MineLights connects to the local server at `127.0.0.1:6742` (the default SDK server address and port). - Run Minecraft. - Using anything which is not OpenRGB? 1. Start Minecraft. 2. Wait for MineLights.exe to finish downloading in the background. 3. If all goes well, you will see a dialog asking you if you want to grant `MineLights.exe` permission to access the internet. 4. After accepting, your supported devices will show red. ## Full Changelog & Technical Details - Added Forge config screen integration across supported releases, with a native screen on older versions that do not use Cloth Config. - Fixed the NeoForge config screen factory for the API signature used by NeoForge 1.21.1, resolving the `AbstractMethodError` reported in [issue #30](https://github.com/megabytesme/MineLights/issues/30). - Reworked legacy Forge settings with separate category tabs, page navigation that stays within the selected tab, and a dedicated About section. - Hid Locator Bar settings before Minecraft 26.1 and End Flash settings before Minecraft 1.21.9 in applicable configuration menus. - Queued Modrinth update notices until a player is available, across Fabric, Quilt, Forge, and NeoForge. - Updated older Fabric version detection and tick callback registration, including the Modrinth update check's Minecraft version lookup. - Corrected Fabric API and Java 8 build settings for Minecraft 1.14.3, and hardened Forge and NeoForge shutdown handling.

# MineLights 2.3.8.4 This release adds Forge configuration menus, refined settings across Minecraft versions, improved reliability of the mod update checker, and fixes issues with the config screen on NeoForge. Previous server version compatible (as of 2.3.1)! ## Key Features & Major Changes - Added Forge configuration menu support, including a built-in settings screen for older Forge versions. - Fixed MineLights settings failing to open on NeoForge 1.21.1 with Mod Menu ([#30](https://github.com/megabytesme/MineLights/issues/30)). - Updated settings menus to show features available in the current Minecraft version. - Fixed update notices being dropped when the Modrinth check finished before a world was joined. ## Installation / Upgrade Instructions - DELETE your old mine-lights-\*.jar file completely. - Download the jar from this release. - Place the new minelights-\*.jar into your mods folder. - Install Cloth Config, here: [https://modrinth.com/mod/cloth-config](https://modrinth.com/mod/cloth-config) - **OpenRGB (optional):** The latest OpenRGB version is recommended. After installing or updating OpenRGB, restart your computer before using MineLights. Start OpenRGB, open the **SDK Server** tab, and click **Start Server**. Keep OpenRGB running while Minecraft is open. MineLights connects to the local server at `127.0.0.1:6742` (the default SDK server address and port). - Run Minecraft. - Using anything which is not OpenRGB? 1. Start Minecraft. 2. Wait for MineLights.exe to finish downloading in the background. 3. If all goes well, you will see a dialog asking you if you want to grant `MineLights.exe` permission to access the internet. 4. After accepting, your supported devices will show red. ## Full Changelog & Technical Details - Added Forge config screen integration across supported releases, with a native screen on older versions that do not use Cloth Config. - Fixed the NeoForge config screen factory for the API signature used by NeoForge 1.21.1, resolving the `AbstractMethodError` reported in [issue #30](https://github.com/megabytesme/MineLights/issues/30). - Reworked legacy Forge settings with separate category tabs, page navigation that stays within the selected tab, and a dedicated About section. - Hid Locator Bar settings before Minecraft 26.1 and End Flash settings before Minecraft 1.21.9 in applicable configuration menus. - Queued Modrinth update notices until a player is available, across Fabric, Quilt, Forge, and NeoForge. - Updated older Fabric version detection and tick callback registration, including the Modrinth update check's Minecraft version lookup. - Corrected Fabric API and Java 8 build settings for Minecraft 1.14.3, and hardened Forge and NeoForge shutdown handling.

# MineLights 2.3.8.4 This release adds Forge configuration menus, refined settings across Minecraft versions, improved reliability of the mod update checker, and fixes issues with the config screen on NeoForge. Previous server version compatible (as of 2.3.1)! ## Key Features & Major Changes - Added Forge configuration menu support, including a built-in settings screen for older Forge versions. - Fixed MineLights settings failing to open on NeoForge 1.21.1 with Mod Menu ([#30](https://github.com/megabytesme/MineLights/issues/30)). - Updated settings menus to show features available in the current Minecraft version. - Fixed update notices being dropped when the Modrinth check finished before a world was joined. ## Installation / Upgrade Instructions - DELETE your old mine-lights-\*.jar file completely. - Download the jar from this release. - Place the new minelights-\*.jar into your mods folder. - Install Cloth Config, here: [https://modrinth.com/mod/cloth-config](https://modrinth.com/mod/cloth-config) - **OpenRGB (optional):** The latest OpenRGB version is recommended. After installing or updating OpenRGB, restart your computer before using MineLights. Start OpenRGB, open the **SDK Server** tab, and click **Start Server**. Keep OpenRGB running while Minecraft is open. MineLights connects to the local server at `127.0.0.1:6742` (the default SDK server address and port). - Run Minecraft. - Using anything which is not OpenRGB? 1. Start Minecraft. 2. Wait for MineLights.exe to finish downloading in the background. 3. If all goes well, you will see a dialog asking you if you want to grant `MineLights.exe` permission to access the internet. 4. After accepting, your supported devices will show red. ## Full Changelog & Technical Details - Added Forge config screen integration across supported releases, with a native screen on older versions that do not use Cloth Config. - Fixed the NeoForge config screen factory for the API signature used by NeoForge 1.21.1, resolving the `AbstractMethodError` reported in [issue #30](https://github.com/megabytesme/MineLights/issues/30). - Reworked legacy Forge settings with separate category tabs, page navigation that stays within the selected tab, and a dedicated About section. - Hid Locator Bar settings before Minecraft 26.1 and End Flash settings before Minecraft 1.21.9 in applicable configuration menus. - Queued Modrinth update notices until a player is available, across Fabric, Quilt, Forge, and NeoForge. - Updated older Fabric version detection and tick callback registration, including the Modrinth update check's Minecraft version lookup. - Corrected Fabric API and Java 8 build settings for Minecraft 1.14.3, and hardened Forge and NeoForge shutdown handling.

# MineLights 2.3.8.4 This release adds Forge configuration menus, refined settings across Minecraft versions, improved reliability of the mod update checker, and fixes issues with the config screen on NeoForge. Previous server version compatible (as of 2.3.1)! ## Key Features & Major Changes - Added Forge configuration menu support, including a built-in settings screen for older Forge versions. - Fixed MineLights settings failing to open on NeoForge 1.21.1 with Mod Menu ([#30](https://github.com/megabytesme/MineLights/issues/30)). - Updated settings menus to show features available in the current Minecraft version. - Fixed update notices being dropped when the Modrinth check finished before a world was joined. ## Installation / Upgrade Instructions - DELETE your old mine-lights-\*.jar file completely. - Download the jar from this release. - Place the new minelights-\*.jar into your mods folder. - Install Cloth Config, here: [https://modrinth.com/mod/cloth-config](https://modrinth.com/mod/cloth-config) - **OpenRGB (optional):** The latest OpenRGB version is recommended. After installing or updating OpenRGB, restart your computer before using MineLights. Start OpenRGB, open the **SDK Server** tab, and click **Start Server**. Keep OpenRGB running while Minecraft is open. MineLights connects to the local server at `127.0.0.1:6742` (the default SDK server address and port). - Run Minecraft. - Using anything which is not OpenRGB? 1. Start Minecraft. 2. Wait for MineLights.exe to finish downloading in the background. 3. If all goes well, you will see a dialog asking you if you want to grant `MineLights.exe` permission to access the internet. 4. After accepting, your supported devices will show red. ## Full Changelog & Technical Details - Added Forge config screen integration across supported releases, with a native screen on older versions that do not use Cloth Config. - Fixed the NeoForge config screen factory for the API signature used by NeoForge 1.21.1, resolving the `AbstractMethodError` reported in [issue #30](https://github.com/megabytesme/MineLights/issues/30). - Reworked legacy Forge settings with separate category tabs, page navigation that stays within the selected tab, and a dedicated About section. - Hid Locator Bar settings before Minecraft 26.1 and End Flash settings before Minecraft 1.21.9 in applicable configuration menus. - Queued Modrinth update notices until a player is available, across Fabric, Quilt, Forge, and NeoForge. - Updated older Fabric version detection and tick callback registration, including the Modrinth update check's Minecraft version lookup. - Corrected Fabric API and Java 8 build settings for Minecraft 1.14.3, and hardened Forge and NeoForge shutdown handling.

# MineLights 2.3.8.4 This release adds Forge configuration menus, refined settings across Minecraft versions, improved reliability of the mod update checker, and fixes issues with the config screen on NeoForge. Previous server version compatible (as of 2.3.1)! ## Key Features & Major Changes - Added Forge configuration menu support, including a built-in settings screen for older Forge versions. - Fixed MineLights settings failing to open on NeoForge 1.21.1 with Mod Menu ([#30](https://github.com/megabytesme/MineLights/issues/30)). - Updated settings menus to show features available in the current Minecraft version. - Fixed update notices being dropped when the Modrinth check finished before a world was joined. ## Installation / Upgrade Instructions - DELETE your old mine-lights-\*.jar file completely. - Download the jar from this release. - Place the new minelights-\*.jar into your mods folder. - Install Cloth Config, here: [https://modrinth.com/mod/cloth-config](https://modrinth.com/mod/cloth-config) - **OpenRGB (optional):** The latest OpenRGB version is recommended. After installing or updating OpenRGB, restart your computer before using MineLights. Start OpenRGB, open the **SDK Server** tab, and click **Start Server**. Keep OpenRGB running while Minecraft is open. MineLights connects to the local server at `127.0.0.1:6742` (the default SDK server address and port). - Run Minecraft. - Using anything which is not OpenRGB? 1. Start Minecraft. 2. Wait for MineLights.exe to finish downloading in the background. 3. If all goes well, you will see a dialog asking you if you want to grant `MineLights.exe` permission to access the internet. 4. After accepting, your supported devices will show red. ## Full Changelog & Technical Details - Added Forge config screen integration across supported releases, with a native screen on older versions that do not use Cloth Config. - Fixed the NeoForge config screen factory for the API signature used by NeoForge 1.21.1, resolving the `AbstractMethodError` reported in [issue #30](https://github.com/megabytesme/MineLights/issues/30). - Reworked legacy Forge settings with separate category tabs, page navigation that stays within the selected tab, and a dedicated About section. - Hid Locator Bar settings before Minecraft 26.1 and End Flash settings before Minecraft 1.21.9 in applicable configuration menus. - Queued Modrinth update notices until a player is available, across Fabric, Quilt, Forge, and NeoForge. - Updated older Fabric version detection and tick callback registration, including the Modrinth update check's Minecraft version lookup. - Corrected Fabric API and Java 8 build settings for Minecraft 1.14.3, and hardened Forge and NeoForge shutdown handling.

# MineLights 2.3.8.4 This release adds Forge configuration menus, refined settings across Minecraft versions, improved reliability of the mod update checker, and fixes issues with the config screen on NeoForge. Previous server version compatible (as of 2.3.1)! ## Key Features & Major Changes - Added Forge configuration menu support, including a built-in settings screen for older Forge versions. - Fixed MineLights settings failing to open on NeoForge 1.21.1 with Mod Menu ([#30](https://github.com/megabytesme/MineLights/issues/30)). - Updated settings menus to show features available in the current Minecraft version. - Fixed update notices being dropped when the Modrinth check finished before a world was joined. ## Installation / Upgrade Instructions - DELETE your old mine-lights-\*.jar file completely. - Download the jar from this release. - Place the new minelights-\*.jar into your mods folder. - Install Cloth Config, here: [https://modrinth.com/mod/cloth-config](https://modrinth.com/mod/cloth-config) - **OpenRGB (optional):** The latest OpenRGB version is recommended. After installing or updating OpenRGB, restart your computer before using MineLights. Start OpenRGB, open the **SDK Server** tab, and click **Start Server**. Keep OpenRGB running while Minecraft is open. MineLights connects to the local server at `127.0.0.1:6742` (the default SDK server address and port). - Run Minecraft. - Using anything which is not OpenRGB? 1. Start Minecraft. 2. Wait for MineLights.exe to finish downloading in the background. 3. If all goes well, you will see a dialog asking you if you want to grant `MineLights.exe` permission to access the internet. 4. After accepting, your supported devices will show red. ## Full Changelog & Technical Details - Added Forge config screen integration across supported releases, with a native screen on older versions that do not use Cloth Config. - Fixed the NeoForge config screen factory for the API signature used by NeoForge 1.21.1, resolving the `AbstractMethodError` reported in [issue #30](https://github.com/megabytesme/MineLights/issues/30). - Reworked legacy Forge settings with separate category tabs, page navigation that stays within the selected tab, and a dedicated About section. - Hid Locator Bar settings before Minecraft 26.1 and End Flash settings before Minecraft 1.21.9 in applicable configuration menus. - Queued Modrinth update notices until a player is available, across Fabric, Quilt, Forge, and NeoForge. - Updated older Fabric version detection and tick callback registration, including the Modrinth update check's Minecraft version lookup. - Corrected Fabric API and Java 8 build settings for Minecraft 1.14.3, and hardened Forge and NeoForge shutdown handling.

# MineLights 2.3.8.4 This release adds Forge configuration menus, refined settings across Minecraft versions, improved reliability of the mod update checker, and fixes issues with the config screen on NeoForge. Previous server version compatible (as of 2.3.1)! ## Key Features & Major Changes - Added Forge configuration menu support, including a built-in settings screen for older Forge versions. - Fixed MineLights settings failing to open on NeoForge 1.21.1 with Mod Menu ([#30](https://github.com/megabytesme/MineLights/issues/30)). - Updated settings menus to show features available in the current Minecraft version. - Fixed update notices being dropped when the Modrinth check finished before a world was joined. ## Installation / Upgrade Instructions - DELETE your old mine-lights-\*.jar file completely. - Download the jar from this release. - Place the new minelights-\*.jar into your mods folder. - Install Cloth Config, here: [https://modrinth.com/mod/cloth-config](https://modrinth.com/mod/cloth-config) - **OpenRGB (optional):** The latest OpenRGB version is recommended. After installing or updating OpenRGB, restart your computer before using MineLights. Start OpenRGB, open the **SDK Server** tab, and click **Start Server**. Keep OpenRGB running while Minecraft is open. MineLights connects to the local server at `127.0.0.1:6742` (the default SDK server address and port). - Run Minecraft. - Using anything which is not OpenRGB? 1. Start Minecraft. 2. Wait for MineLights.exe to finish downloading in the background. 3. If all goes well, you will see a dialog asking you if you want to grant `MineLights.exe` permission to access the internet. 4. After accepting, your supported devices will show red. ## Full Changelog & Technical Details - Added Forge config screen integration across supported releases, with a native screen on older versions that do not use Cloth Config. - Fixed the NeoForge config screen factory for the API signature used by NeoForge 1.21.1, resolving the `AbstractMethodError` reported in [issue #30](https://github.com/megabytesme/MineLights/issues/30). - Reworked legacy Forge settings with separate category tabs, page navigation that stays within the selected tab, and a dedicated About section. - Hid Locator Bar settings before Minecraft 26.1 and End Flash settings before Minecraft 1.21.9 in applicable configuration menus. - Queued Modrinth update notices until a player is available, across Fabric, Quilt, Forge, and NeoForge. - Updated older Fabric version detection and tick callback registration, including the Modrinth update check's Minecraft version lookup. - Corrected Fabric API and Java 8 build settings for Minecraft 1.14.3, and hardened Forge and NeoForge shutdown handling.

# MineLights 2.3.8.4 This release adds Forge configuration menus, refined settings across Minecraft versions, improved reliability of the mod update checker, and fixes issues with the config screen on NeoForge. Previous server version compatible (as of 2.3.1)! ## Key Features & Major Changes - Added Forge configuration menu support, including a built-in settings screen for older Forge versions. - Fixed MineLights settings failing to open on NeoForge 1.21.1 with Mod Menu ([#30](https://github.com/megabytesme/MineLights/issues/30)). - Updated settings menus to show features available in the current Minecraft version. - Fixed update notices being dropped when the Modrinth check finished before a world was joined. ## Installation / Upgrade Instructions - DELETE your old mine-lights-\*.jar file completely. - Download the jar from this release. - Place the new minelights-\*.jar into your mods folder. - Install Cloth Config, here: [https://modrinth.com/mod/cloth-config](https://modrinth.com/mod/cloth-config) - **OpenRGB (optional):** The latest OpenRGB version is recommended. After installing or updating OpenRGB, restart your computer before using MineLights. Start OpenRGB, open the **SDK Server** tab, and click **Start Server**. Keep OpenRGB running while Minecraft is open. MineLights connects to the local server at `127.0.0.1:6742` (the default SDK server address and port). - Run Minecraft. - Using anything which is not OpenRGB? 1. Start Minecraft. 2. Wait for MineLights.exe to finish downloading in the background. 3. If all goes well, you will see a dialog asking you if you want to grant `MineLights.exe` permission to access the internet. 4. After accepting, your supported devices will show red. ## Full Changelog & Technical Details - Added Forge config screen integration across supported releases, with a native screen on older versions that do not use Cloth Config. - Fixed the NeoForge config screen factory for the API signature used by NeoForge 1.21.1, resolving the `AbstractMethodError` reported in [issue #30](https://github.com/megabytesme/MineLights/issues/30). - Reworked legacy Forge settings with separate category tabs, page navigation that stays within the selected tab, and a dedicated About section. - Hid Locator Bar settings before Minecraft 26.1 and End Flash settings before Minecraft 1.21.9 in applicable configuration menus. - Queued Modrinth update notices until a player is available, across Fabric, Quilt, Forge, and NeoForge. - Updated older Fabric version detection and tick callback registration, including the Modrinth update check's Minecraft version lookup. - Corrected Fabric API and Java 8 build settings for Minecraft 1.14.3, and hardened Forge and NeoForge shutdown handling.

# MineLights 2.3.8.4 This release adds Forge configuration menus, refined settings across Minecraft versions, improved reliability of the mod update checker, and fixes issues with the config screen on NeoForge. Previous server version compatible (as of 2.3.1)! ## Key Features & Major Changes - Added Forge configuration menu support, including a built-in settings screen for older Forge versions. - Fixed MineLights settings failing to open on NeoForge 1.21.1 with Mod Menu ([#30](https://github.com/megabytesme/MineLights/issues/30)). - Updated settings menus to show features available in the current Minecraft version. - Fixed update notices being dropped when the Modrinth check finished before a world was joined. ## Installation / Upgrade Instructions - DELETE your old mine-lights-\*.jar file completely. - Download the jar from this release. - Place the new minelights-\*.jar into your mods folder. - Install Cloth Config, here: [https://modrinth.com/mod/cloth-config](https://modrinth.com/mod/cloth-config) - **OpenRGB (optional):** The latest OpenRGB version is recommended. After installing or updating OpenRGB, restart your computer before using MineLights. Start OpenRGB, open the **SDK Server** tab, and click **Start Server**. Keep OpenRGB running while Minecraft is open. MineLights connects to the local server at `127.0.0.1:6742` (the default SDK server address and port). - Run Minecraft. - Using anything which is not OpenRGB? 1. Start Minecraft. 2. Wait for MineLights.exe to finish downloading in the background. 3. If all goes well, you will see a dialog asking you if you want to grant `MineLights.exe` permission to access the internet. 4. After accepting, your supported devices will show red. ## Full Changelog & Technical Details - Added Forge config screen integration across supported releases, with a native screen on older versions that do not use Cloth Config. - Fixed the NeoForge config screen factory for the API signature used by NeoForge 1.21.1, resolving the `AbstractMethodError` reported in [issue #30](https://github.com/megabytesme/MineLights/issues/30). - Reworked legacy Forge settings with separate category tabs, page navigation that stays within the selected tab, and a dedicated About section. - Hid Locator Bar settings before Minecraft 26.1 and End Flash settings before Minecraft 1.21.9 in applicable configuration menus. - Queued Modrinth update notices until a player is available, across Fabric, Quilt, Forge, and NeoForge. - Updated older Fabric version detection and tick callback registration, including the Modrinth update check's Minecraft version lookup. - Corrected Fabric API and Java 8 build settings for Minecraft 1.14.3, and hardened Forge and NeoForge shutdown handling.

# MineLights 2.3.8.4 This release adds Forge configuration menus, refined settings across Minecraft versions, improved reliability of the mod update checker, and fixes issues with the config screen on NeoForge. Previous server version compatible (as of 2.3.1)! ## Key Features & Major Changes - Added Forge configuration menu support, including a built-in settings screen for older Forge versions. - Fixed MineLights settings failing to open on NeoForge 1.21.1 with Mod Menu ([#30](https://github.com/megabytesme/MineLights/issues/30)). - Updated settings menus to show features available in the current Minecraft version. - Fixed update notices being dropped when the Modrinth check finished before a world was joined. ## Installation / Upgrade Instructions - DELETE your old mine-lights-\*.jar file completely. - Download the jar from this release. - Place the new minelights-\*.jar into your mods folder. - Install Cloth Config, here: [https://modrinth.com/mod/cloth-config](https://modrinth.com/mod/cloth-config) - **OpenRGB (optional):** The latest OpenRGB version is recommended. After installing or updating OpenRGB, restart your computer before using MineLights. Start OpenRGB, open the **SDK Server** tab, and click **Start Server**. Keep OpenRGB running while Minecraft is open. MineLights connects to the local server at `127.0.0.1:6742` (the default SDK server address and port). - Run Minecraft. - Using anything which is not OpenRGB? 1. Start Minecraft. 2. Wait for MineLights.exe to finish downloading in the background. 3. If all goes well, you will see a dialog asking you if you want to grant `MineLights.exe` permission to access the internet. 4. After accepting, your supported devices will show red. ## Full Changelog & Technical Details - Added Forge config screen integration across supported releases, with a native screen on older versions that do not use Cloth Config. - Fixed the NeoForge config screen factory for the API signature used by NeoForge 1.21.1, resolving the `AbstractMethodError` reported in [issue #30](https://github.com/megabytesme/MineLights/issues/30). - Reworked legacy Forge settings with separate category tabs, page navigation that stays within the selected tab, and a dedicated About section. - Hid Locator Bar settings before Minecraft 26.1 and End Flash settings before Minecraft 1.21.9 in applicable configuration menus. - Queued Modrinth update notices until a player is available, across Fabric, Quilt, Forge, and NeoForge. - Updated older Fabric version detection and tick callback registration, including the Modrinth update check's Minecraft version lookup. - Corrected Fabric API and Java 8 build settings for Minecraft 1.14.3, and hardened Forge and NeoForge shutdown handling.

# MineLights 2.3.8.4 This release adds Forge configuration menus, refined settings across Minecraft versions, improved reliability of the mod update checker, and fixes issues with the config screen on NeoForge. Previous server version compatible (as of 2.3.1)! ## Key Features & Major Changes - Added Forge configuration menu support, including a built-in settings screen for older Forge versions. - Fixed MineLights settings failing to open on NeoForge 1.21.1 with Mod Menu ([#30](https://github.com/megabytesme/MineLights/issues/30)). - Updated settings menus to show features available in the current Minecraft version. - Fixed update notices being dropped when the Modrinth check finished before a world was joined. ## Installation / Upgrade Instructions - DELETE your old mine-lights-\*.jar file completely. - Download the jar from this release. - Place the new minelights-\*.jar into your mods folder. - Install Cloth Config, here: [https://modrinth.com/mod/cloth-config](https://modrinth.com/mod/cloth-config) - **OpenRGB (optional):** The latest OpenRGB version is recommended. After installing or updating OpenRGB, restart your computer before using MineLights. Start OpenRGB, open the **SDK Server** tab, and click **Start Server**. Keep OpenRGB running while Minecraft is open. MineLights connects to the local server at `127.0.0.1:6742` (the default SDK server address and port). - Run Minecraft. - Using anything which is not OpenRGB? 1. Start Minecraft. 2. Wait for MineLights.exe to finish downloading in the background. 3. If all goes well, you will see a dialog asking you if you want to grant `MineLights.exe` permission to access the internet. 4. After accepting, your supported devices will show red. ## Full Changelog & Technical Details - Added Forge config screen integration across supported releases, with a native screen on older versions that do not use Cloth Config. - Fixed the NeoForge config screen factory for the API signature used by NeoForge 1.21.1, resolving the `AbstractMethodError` reported in [issue #30](https://github.com/megabytesme/MineLights/issues/30). - Reworked legacy Forge settings with separate category tabs, page navigation that stays within the selected tab, and a dedicated About section. - Hid Locator Bar settings before Minecraft 26.1 and End Flash settings before Minecraft 1.21.9 in applicable configuration menus. - Queued Modrinth update notices until a player is available, across Fabric, Quilt, Forge, and NeoForge. - Updated older Fabric version detection and tick callback registration, including the Modrinth update check's Minecraft version lookup. - Corrected Fabric API and Java 8 build settings for Minecraft 1.14.3, and hardened Forge and NeoForge shutdown handling.

# MineLights 2.3.8.4 This release adds Forge configuration menus, refined settings across Minecraft versions, improved reliability of the mod update checker, and fixes issues with the config screen on NeoForge. Previous server version compatible (as of 2.3.1)! ## Key Features & Major Changes - Added Forge configuration menu support, including a built-in settings screen for older Forge versions. - Fixed MineLights settings failing to open on NeoForge 1.21.1 with Mod Menu ([#30](https://github.com/megabytesme/MineLights/issues/30)). - Updated settings menus to show features available in the current Minecraft version. - Fixed update notices being dropped when the Modrinth check finished before a world was joined. ## Installation / Upgrade Instructions - DELETE your old mine-lights-\*.jar file completely. - Download the jar from this release. - Place the new minelights-\*.jar into your mods folder. - Install Cloth Config, here: [https://modrinth.com/mod/cloth-config](https://modrinth.com/mod/cloth-config) - **OpenRGB (optional):** The latest OpenRGB version is recommended. After installing or updating OpenRGB, restart your computer before using MineLights. Start OpenRGB, open the **SDK Server** tab, and click **Start Server**. Keep OpenRGB running while Minecraft is open. MineLights connects to the local server at `127.0.0.1:6742` (the default SDK server address and port). - Run Minecraft. - Using anything which is not OpenRGB? 1. Start Minecraft. 2. Wait for MineLights.exe to finish downloading in the background. 3. If all goes well, you will see a dialog asking you if you want to grant `MineLights.exe` permission to access the internet. 4. After accepting, your supported devices will show red. ## Full Changelog & Technical Details - Added Forge config screen integration across supported releases, with a native screen on older versions that do not use Cloth Config. - Fixed the NeoForge config screen factory for the API signature used by NeoForge 1.21.1, resolving the `AbstractMethodError` reported in [issue #30](https://github.com/megabytesme/MineLights/issues/30). - Reworked legacy Forge settings with separate category tabs, page navigation that stays within the selected tab, and a dedicated About section. - Hid Locator Bar settings before Minecraft 26.1 and End Flash settings before Minecraft 1.21.9 in applicable configuration menus. - Queued Modrinth update notices until a player is available, across Fabric, Quilt, Forge, and NeoForge. - Updated older Fabric version detection and tick callback registration, including the Modrinth update check's Minecraft version lookup. - Corrected Fabric API and Java 8 build settings for Minecraft 1.14.3, and hardened Forge and NeoForge shutdown handling.

# MineLights 2.3.8.4 This release adds Forge configuration menus, refined settings across Minecraft versions, improved reliability of the mod update checker, and fixes issues with the config screen on NeoForge. Previous server version compatible (as of 2.3.1)! ## Key Features & Major Changes - Added Forge configuration menu support, including a built-in settings screen for older Forge versions. - Fixed MineLights settings failing to open on NeoForge 1.21.1 with Mod Menu ([#30](https://github.com/megabytesme/MineLights/issues/30)). - Updated settings menus to show features available in the current Minecraft version. - Fixed update notices being dropped when the Modrinth check finished before a world was joined. ## Installation / Upgrade Instructions - DELETE your old mine-lights-\*.jar file completely. - Download the jar from this release. - Place the new minelights-\*.jar into your mods folder. - Install Cloth Config, here: [https://modrinth.com/mod/cloth-config](https://modrinth.com/mod/cloth-config) - **OpenRGB (optional):** The latest OpenRGB version is recommended. After installing or updating OpenRGB, restart your computer before using MineLights. Start OpenRGB, open the **SDK Server** tab, and click **Start Server**. Keep OpenRGB running while Minecraft is open. MineLights connects to the local server at `127.0.0.1:6742` (the default SDK server address and port). - Run Minecraft. - Using anything which is not OpenRGB? 1. Start Minecraft. 2. Wait for MineLights.exe to finish downloading in the background. 3. If all goes well, you will see a dialog asking you if you want to grant `MineLights.exe` permission to access the internet. 4. After accepting, your supported devices will show red. ## Full Changelog & Technical Details - Added Forge config screen integration across supported releases, with a native screen on older versions that do not use Cloth Config. - Fixed the NeoForge config screen factory for the API signature used by NeoForge 1.21.1, resolving the `AbstractMethodError` reported in [issue #30](https://github.com/megabytesme/MineLights/issues/30). - Reworked legacy Forge settings with separate category tabs, page navigation that stays within the selected tab, and a dedicated About section. - Hid Locator Bar settings before Minecraft 26.1 and End Flash settings before Minecraft 1.21.9 in applicable configuration menus. - Queued Modrinth update notices until a player is available, across Fabric, Quilt, Forge, and NeoForge. - Updated older Fabric version detection and tick callback registration, including the Modrinth update check's Minecraft version lookup. - Corrected Fabric API and Java 8 build settings for Minecraft 1.14.3, and hardened Forge and NeoForge shutdown handling.

# MineLights 2.3.8.4 This release adds Forge configuration menus, refined settings across Minecraft versions, improved reliability of the mod update checker, and fixes issues with the config screen on NeoForge. Previous server version compatible (as of 2.3.1)! ## Key Features & Major Changes - Added Forge configuration menu support, including a built-in settings screen for older Forge versions. - Fixed MineLights settings failing to open on NeoForge 1.21.1 with Mod Menu ([#30](https://github.com/megabytesme/MineLights/issues/30)). - Updated settings menus to show features available in the current Minecraft version. - Fixed update notices being dropped when the Modrinth check finished before a world was joined. ## Installation / Upgrade Instructions - DELETE your old mine-lights-\*.jar file completely. - Download the jar from this release. - Place the new minelights-\*.jar into your mods folder. - Install Cloth Config, here: [https://modrinth.com/mod/cloth-config](https://modrinth.com/mod/cloth-config) - **OpenRGB (optional):** The latest OpenRGB version is recommended. After installing or updating OpenRGB, restart your computer before using MineLights. Start OpenRGB, open the **SDK Server** tab, and click **Start Server**. Keep OpenRGB running while Minecraft is open. MineLights connects to the local server at `127.0.0.1:6742` (the default SDK server address and port). - Run Minecraft. - Using anything which is not OpenRGB? 1. Start Minecraft. 2. Wait for MineLights.exe to finish downloading in the background. 3. If all goes well, you will see a dialog asking you if you want to grant `MineLights.exe` permission to access the internet. 4. After accepting, your supported devices will show red. ## Full Changelog & Technical Details - Added Forge config screen integration across supported releases, with a native screen on older versions that do not use Cloth Config. - Fixed the NeoForge config screen factory for the API signature used by NeoForge 1.21.1, resolving the `AbstractMethodError` reported in [issue #30](https://github.com/megabytesme/MineLights/issues/30). - Reworked legacy Forge settings with separate category tabs, page navigation that stays within the selected tab, and a dedicated About section. - Hid Locator Bar settings before Minecraft 26.1 and End Flash settings before Minecraft 1.21.9 in applicable configuration menus. - Queued Modrinth update notices until a player is available, across Fabric, Quilt, Forge, and NeoForge. - Updated older Fabric version detection and tick callback registration, including the Modrinth update check's Minecraft version lookup. - Corrected Fabric API and Java 8 build settings for Minecraft 1.14.3, and hardened Forge and NeoForge shutdown handling.

# MineLights 2.3.8.4 This release adds Forge configuration menus, refined settings across Minecraft versions, improved reliability of the mod update checker, and fixes issues with the config screen on NeoForge. Previous server version compatible (as of 2.3.1)! ## Key Features & Major Changes - Added Forge configuration menu support, including a built-in settings screen for older Forge versions. - Fixed MineLights settings failing to open on NeoForge 1.21.1 with Mod Menu ([#30](https://github.com/megabytesme/MineLights/issues/30)). - Updated settings menus to show features available in the current Minecraft version. - Fixed update notices being dropped when the Modrinth check finished before a world was joined. ## Installation / Upgrade Instructions - DELETE your old mine-lights-\*.jar file completely. - Download the jar from this release. - Place the new minelights-\*.jar into your mods folder. - Install Cloth Config, here: [https://modrinth.com/mod/cloth-config](https://modrinth.com/mod/cloth-config) - **OpenRGB (optional):** The latest OpenRGB version is recommended. After installing or updating OpenRGB, restart your computer before using MineLights. Start OpenRGB, open the **SDK Server** tab, and click **Start Server**. Keep OpenRGB running while Minecraft is open. MineLights connects to the local server at `127.0.0.1:6742` (the default SDK server address and port). - Run Minecraft. - Using anything which is not OpenRGB? 1. Start Minecraft. 2. Wait for MineLights.exe to finish downloading in the background. 3. If all goes well, you will see a dialog asking you if you want to grant `MineLights.exe` permission to access the internet. 4. After accepting, your supported devices will show red. ## Full Changelog & Technical Details - Added Forge config screen integration across supported releases, with a native screen on older versions that do not use Cloth Config. - Fixed the NeoForge config screen factory for the API signature used by NeoForge 1.21.1, resolving the `AbstractMethodError` reported in [issue #30](https://github.com/megabytesme/MineLights/issues/30). - Reworked legacy Forge settings with separate category tabs, page navigation that stays within the selected tab, and a dedicated About section. - Hid Locator Bar settings before Minecraft 26.1 and End Flash settings before Minecraft 1.21.9 in applicable configuration menus. - Queued Modrinth update notices until a player is available, across Fabric, Quilt, Forge, and NeoForge. - Updated older Fabric version detection and tick callback registration, including the Modrinth update check's Minecraft version lookup. - Corrected Fabric API and Java 8 build settings for Minecraft 1.14.3, and hardened Forge and NeoForge shutdown handling.

# MineLights 2.3.8.4 This release adds Forge configuration menus, refined settings across Minecraft versions, improved reliability of the mod update checker, and fixes issues with the config screen on NeoForge. Previous server version compatible (as of 2.3.1)! ## Key Features & Major Changes - Added Forge configuration menu support, including a built-in settings screen for older Forge versions. - Fixed MineLights settings failing to open on NeoForge 1.21.1 with Mod Menu ([#30](https://github.com/megabytesme/MineLights/issues/30)). - Updated settings menus to show features available in the current Minecraft version. - Fixed update notices being dropped when the Modrinth check finished before a world was joined. ## Installation / Upgrade Instructions - DELETE your old mine-lights-\*.jar file completely. - Download the jar from this release. - Place the new minelights-\*.jar into your mods folder. - Install Cloth Config, here: [https://modrinth.com/mod/cloth-config](https://modrinth.com/mod/cloth-config) - **OpenRGB (optional):** The latest OpenRGB version is recommended. After installing or updating OpenRGB, restart your computer before using MineLights. Start OpenRGB, open the **SDK Server** tab, and click **Start Server**. Keep OpenRGB running while Minecraft is open. MineLights connects to the local server at `127.0.0.1:6742` (the default SDK server address and port). - Run Minecraft. - Using anything which is not OpenRGB? 1. Start Minecraft. 2. Wait for MineLights.exe to finish downloading in the background. 3. If all goes well, you will see a dialog asking you if you want to grant `MineLights.exe` permission to access the internet. 4. After accepting, your supported devices will show red. ## Full Changelog & Technical Details - Added Forge config screen integration across supported releases, with a native screen on older versions that do not use Cloth Config. - Fixed the NeoForge config screen factory for the API signature used by NeoForge 1.21.1, resolving the `AbstractMethodError` reported in [issue #30](https://github.com/megabytesme/MineLights/issues/30). - Reworked legacy Forge settings with separate category tabs, page navigation that stays within the selected tab, and a dedicated About section. - Hid Locator Bar settings before Minecraft 26.1 and End Flash settings before Minecraft 1.21.9 in applicable configuration menus. - Queued Modrinth update notices until a player is available, across Fabric, Quilt, Forge, and NeoForge. - Updated older Fabric version detection and tick callback registration, including the Modrinth update check's Minecraft version lookup. - Corrected Fabric API and Java 8 build settings for Minecraft 1.14.3, and hardened Forge and NeoForge shutdown handling.

# MineLights 2.3.8.4 This release adds Forge configuration menus, refined settings across Minecraft versions, improved reliability of the mod update checker, and fixes issues with the config screen on NeoForge. Previous server version compatible (as of 2.3.1)! ## Key Features & Major Changes - Added Forge configuration menu support, including a built-in settings screen for older Forge versions. - Fixed MineLights settings failing to open on NeoForge 1.21.1 with Mod Menu ([#30](https://github.com/megabytesme/MineLights/issues/30)). - Updated settings menus to show features available in the current Minecraft version. - Fixed update notices being dropped when the Modrinth check finished before a world was joined. ## Installation / Upgrade Instructions - DELETE your old mine-lights-\*.jar file completely. - Download the jar from this release. - Place the new minelights-\*.jar into your mods folder. - Install Cloth Config, here: [https://modrinth.com/mod/cloth-config](https://modrinth.com/mod/cloth-config) - **OpenRGB (optional):** The latest OpenRGB version is recommended. After installing or updating OpenRGB, restart your computer before using MineLights. Start OpenRGB, open the **SDK Server** tab, and click **Start Server**. Keep OpenRGB running while Minecraft is open. MineLights connects to the local server at `127.0.0.1:6742` (the default SDK server address and port). - Run Minecraft. - Using anything which is not OpenRGB? 1. Start Minecraft. 2. Wait for MineLights.exe to finish downloading in the background. 3. If all goes well, you will see a dialog asking you if you want to grant `MineLights.exe` permission to access the internet. 4. After accepting, your supported devices will show red. ## Full Changelog & Technical Details - Added Forge config screen integration across supported releases, with a native screen on older versions that do not use Cloth Config. - Fixed the NeoForge config screen factory for the API signature used by NeoForge 1.21.1, resolving the `AbstractMethodError` reported in [issue #30](https://github.com/megabytesme/MineLights/issues/30). - Reworked legacy Forge settings with separate category tabs, page navigation that stays within the selected tab, and a dedicated About section. - Hid Locator Bar settings before Minecraft 26.1 and End Flash settings before Minecraft 1.21.9 in applicable configuration menus. - Queued Modrinth update notices until a player is available, across Fabric, Quilt, Forge, and NeoForge. - Updated older Fabric version detection and tick callback registration, including the Modrinth update check's Minecraft version lookup. - Corrected Fabric API and Java 8 build settings for Minecraft 1.14.3, and hardened Forge and NeoForge shutdown handling.

# MineLights 2.3.8.4 This release adds Forge configuration menus, refined settings across Minecraft versions, improved reliability of the mod update checker, and fixes issues with the config screen on NeoForge. Previous server version compatible (as of 2.3.1)! ## Key Features & Major Changes - Added Forge configuration menu support, including a built-in settings screen for older Forge versions. - Fixed MineLights settings failing to open on NeoForge 1.21.1 with Mod Menu ([#30](https://github.com/megabytesme/MineLights/issues/30)). - Updated settings menus to show features available in the current Minecraft version. - Fixed update notices being dropped when the Modrinth check finished before a world was joined. ## Installation / Upgrade Instructions - DELETE your old mine-lights-\*.jar file completely. - Download the jar from this release. - Place the new minelights-\*.jar into your mods folder. - Install Cloth Config, here: [https://modrinth.com/mod/cloth-config](https://modrinth.com/mod/cloth-config) - **OpenRGB (optional):** The latest OpenRGB version is recommended. After installing or updating OpenRGB, restart your computer before using MineLights. Start OpenRGB, open the **SDK Server** tab, and click **Start Server**. Keep OpenRGB running while Minecraft is open. MineLights connects to the local server at `127.0.0.1:6742` (the default SDK server address and port). - Run Minecraft. - Using anything which is not OpenRGB? 1. Start Minecraft. 2. Wait for MineLights.exe to finish downloading in the background. 3. If all goes well, you will see a dialog asking you if you want to grant `MineLights.exe` permission to access the internet. 4. After accepting, your supported devices will show red. ## Full Changelog & Technical Details - Added Forge config screen integration across supported releases, with a native screen on older versions that do not use Cloth Config. - Fixed the NeoForge config screen factory for the API signature used by NeoForge 1.21.1, resolving the `AbstractMethodError` reported in [issue #30](https://github.com/megabytesme/MineLights/issues/30). - Reworked legacy Forge settings with separate category tabs, page navigation that stays within the selected tab, and a dedicated About section. - Hid Locator Bar settings before Minecraft 26.1 and End Flash settings before Minecraft 1.21.9 in applicable configuration menus. - Queued Modrinth update notices until a player is available, across Fabric, Quilt, Forge, and NeoForge. - Updated older Fabric version detection and tick callback registration, including the Modrinth update check's Minecraft version lookup. - Corrected Fabric API and Java 8 build settings for Minecraft 1.14.3, and hardened Forge and NeoForge shutdown handling.

# MineLights 2.3.8.4 This release adds Forge configuration menus, refined settings across Minecraft versions, improved reliability of the mod update checker, and fixes issues with the config screen on NeoForge. Previous server version compatible (as of 2.3.1)! ## Key Features & Major Changes - Added Forge configuration menu support, including a built-in settings screen for older Forge versions. - Fixed MineLights settings failing to open on NeoForge 1.21.1 with Mod Menu ([#30](https://github.com/megabytesme/MineLights/issues/30)). - Updated settings menus to show features available in the current Minecraft version. - Fixed update notices being dropped when the Modrinth check finished before a world was joined. ## Installation / Upgrade Instructions - DELETE your old mine-lights-\*.jar file completely. - Download the jar from this release. - Place the new minelights-\*.jar into your mods folder. - Install Cloth Config, here: [https://modrinth.com/mod/cloth-config](https://modrinth.com/mod/cloth-config) - **OpenRGB (optional):** The latest OpenRGB version is recommended. After installing or updating OpenRGB, restart your computer before using MineLights. Start OpenRGB, open the **SDK Server** tab, and click **Start Server**. Keep OpenRGB running while Minecraft is open. MineLights connects to the local server at `127.0.0.1:6742` (the default SDK server address and port). - Run Minecraft. - Using anything which is not OpenRGB? 1. Start Minecraft. 2. Wait for MineLights.exe to finish downloading in the background. 3. If all goes well, you will see a dialog asking you if you want to grant `MineLights.exe` permission to access the internet. 4. After accepting, your supported devices will show red. ## Full Changelog & Technical Details - Added Forge config screen integration across supported releases, with a native screen on older versions that do not use Cloth Config. - Fixed the NeoForge config screen factory for the API signature used by NeoForge 1.21.1, resolving the `AbstractMethodError` reported in [issue #30](https://github.com/megabytesme/MineLights/issues/30). - Reworked legacy Forge settings with separate category tabs, page navigation that stays within the selected tab, and a dedicated About section. - Hid Locator Bar settings before Minecraft 26.1 and End Flash settings before Minecraft 1.21.9 in applicable configuration menus. - Queued Modrinth update notices until a player is available, across Fabric, Quilt, Forge, and NeoForge. - Updated older Fabric version detection and tick callback registration, including the Modrinth update check's Minecraft version lookup. - Corrected Fabric API and Java 8 build settings for Minecraft 1.14.3, and hardened Forge and NeoForge shutdown handling.

# MineLights 2.3.8.4 This release adds Forge configuration menus, refined settings across Minecraft versions, improved reliability of the mod update checker, and fixes issues with the config screen on NeoForge. Previous server version compatible (as of 2.3.1)! ## Key Features & Major Changes - Added Forge configuration menu support, including a built-in settings screen for older Forge versions. - Fixed MineLights settings failing to open on NeoForge 1.21.1 with Mod Menu ([#30](https://github.com/megabytesme/MineLights/issues/30)). - Updated settings menus to show features available in the current Minecraft version. - Fixed update notices being dropped when the Modrinth check finished before a world was joined. ## Installation / Upgrade Instructions - DELETE your old mine-lights-\*.jar file completely. - Download the jar from this release. - Place the new minelights-\*.jar into your mods folder. - Install Cloth Config, here: [https://modrinth.com/mod/cloth-config](https://modrinth.com/mod/cloth-config) - **OpenRGB (optional):** The latest OpenRGB version is recommended. After installing or updating OpenRGB, restart your computer before using MineLights. Start OpenRGB, open the **SDK Server** tab, and click **Start Server**. Keep OpenRGB running while Minecraft is open. MineLights connects to the local server at `127.0.0.1:6742` (the default SDK server address and port). - Run Minecraft. - Using anything which is not OpenRGB? 1. Start Minecraft. 2. Wait for MineLights.exe to finish downloading in the background. 3. If all goes well, you will see a dialog asking you if you want to grant `MineLights.exe` permission to access the internet. 4. After accepting, your supported devices will show red. ## Full Changelog & Technical Details - Added Forge config screen integration across supported releases, with a native screen on older versions that do not use Cloth Config. - Fixed the NeoForge config screen factory for the API signature used by NeoForge 1.21.1, resolving the `AbstractMethodError` reported in [issue #30](https://github.com/megabytesme/MineLights/issues/30). - Reworked legacy Forge settings with separate category tabs, page navigation that stays within the selected tab, and a dedicated About section. - Hid Locator Bar settings before Minecraft 26.1 and End Flash settings before Minecraft 1.21.9 in applicable configuration menus. - Queued Modrinth update notices until a player is available, across Fabric, Quilt, Forge, and NeoForge. - Updated older Fabric version detection and tick callback registration, including the Modrinth update check's Minecraft version lookup. - Corrected Fabric API and Java 8 build settings for Minecraft 1.14.3, and hardened Forge and NeoForge shutdown handling.

# MineLights 2.3.8.4 This release adds Forge configuration menus, refined settings across Minecraft versions, improved reliability of the mod update checker, and fixes issues with the config screen on NeoForge. Previous server version compatible (as of 2.3.1)! ## Key Features & Major Changes - Added Forge configuration menu support, including a built-in settings screen for older Forge versions. - Fixed MineLights settings failing to open on NeoForge 1.21.1 with Mod Menu ([#30](https://github.com/megabytesme/MineLights/issues/30)). - Updated settings menus to show features available in the current Minecraft version. - Fixed update notices being dropped when the Modrinth check finished before a world was joined. ## Installation / Upgrade Instructions - DELETE your old mine-lights-\*.jar file completely. - Download the jar from this release. - Place the new minelights-\*.jar into your mods folder. - Install Cloth Config, here: [https://modrinth.com/mod/cloth-config](https://modrinth.com/mod/cloth-config) - **OpenRGB (optional):** The latest OpenRGB version is recommended. After installing or updating OpenRGB, restart your computer before using MineLights. Start OpenRGB, open the **SDK Server** tab, and click **Start Server**. Keep OpenRGB running while Minecraft is open. MineLights connects to the local server at `127.0.0.1:6742` (the default SDK server address and port). - Run Minecraft. - Using anything which is not OpenRGB? 1. Start Minecraft. 2. Wait for MineLights.exe to finish downloading in the background. 3. If all goes well, you will see a dialog asking you if you want to grant `MineLights.exe` permission to access the internet. 4. After accepting, your supported devices will show red. ## Full Changelog & Technical Details - Added Forge config screen integration across supported releases, with a native screen on older versions that do not use Cloth Config. - Fixed the NeoForge config screen factory for the API signature used by NeoForge 1.21.1, resolving the `AbstractMethodError` reported in [issue #30](https://github.com/megabytesme/MineLights/issues/30). - Reworked legacy Forge settings with separate category tabs, page navigation that stays within the selected tab, and a dedicated About section. - Hid Locator Bar settings before Minecraft 26.1 and End Flash settings before Minecraft 1.21.9 in applicable configuration menus. - Queued Modrinth update notices until a player is available, across Fabric, Quilt, Forge, and NeoForge. - Updated older Fabric version detection and tick callback registration, including the Modrinth update check's Minecraft version lookup. - Corrected Fabric API and Java 8 build settings for Minecraft 1.14.3, and hardened Forge and NeoForge shutdown handling.

# MineLights 2.3.8.4 This release adds Forge configuration menus, refined settings across Minecraft versions, improved reliability of the mod update checker, and fixes issues with the config screen on NeoForge. Previous server version compatible (as of 2.3.1)! ## Key Features & Major Changes - Added Forge configuration menu support, including a built-in settings screen for older Forge versions. - Fixed MineLights settings failing to open on NeoForge 1.21.1 with Mod Menu ([#30](https://github.com/megabytesme/MineLights/issues/30)). - Updated settings menus to show features available in the current Minecraft version. - Fixed update notices being dropped when the Modrinth check finished before a world was joined. ## Installation / Upgrade Instructions - DELETE your old mine-lights-\*.jar file completely. - Download the jar from this release. - Place the new minelights-\*.jar into your mods folder. - Install Cloth Config, here: [https://modrinth.com/mod/cloth-config](https://modrinth.com/mod/cloth-config) - **OpenRGB (optional):** The latest OpenRGB version is recommended. After installing or updating OpenRGB, restart your computer before using MineLights. Start OpenRGB, open the **SDK Server** tab, and click **Start Server**. Keep OpenRGB running while Minecraft is open. MineLights connects to the local server at `127.0.0.1:6742` (the default SDK server address and port). - Run Minecraft. - Using anything which is not OpenRGB? 1. Start Minecraft. 2. Wait for MineLights.exe to finish downloading in the background. 3. If all goes well, you will see a dialog asking you if you want to grant `MineLights.exe` permission to access the internet. 4. After accepting, your supported devices will show red. ## Full Changelog & Technical Details - Added Forge config screen integration across supported releases, with a native screen on older versions that do not use Cloth Config. - Fixed the NeoForge config screen factory for the API signature used by NeoForge 1.21.1, resolving the `AbstractMethodError` reported in [issue #30](https://github.com/megabytesme/MineLights/issues/30). - Reworked legacy Forge settings with separate category tabs, page navigation that stays within the selected tab, and a dedicated About section. - Hid Locator Bar settings before Minecraft 26.1 and End Flash settings before Minecraft 1.21.9 in applicable configuration menus. - Queued Modrinth update notices until a player is available, across Fabric, Quilt, Forge, and NeoForge. - Updated older Fabric version detection and tick callback registration, including the Modrinth update check's Minecraft version lookup. - Corrected Fabric API and Java 8 build settings for Minecraft 1.14.3, and hardened Forge and NeoForge shutdown handling.

# MineLights 2.3.8.4 This release adds Forge configuration menus, refined settings across Minecraft versions, improved reliability of the mod update checker, and fixes issues with the config screen on NeoForge. Previous server version compatible (as of 2.3.1)! ## Key Features & Major Changes - Added Forge configuration menu support, including a built-in settings screen for older Forge versions. - Fixed MineLights settings failing to open on NeoForge 1.21.1 with Mod Menu ([#30](https://github.com/megabytesme/MineLights/issues/30)). - Updated settings menus to show features available in the current Minecraft version. - Fixed update notices being dropped when the Modrinth check finished before a world was joined. ## Installation / Upgrade Instructions - DELETE your old mine-lights-\*.jar file completely. - Download the jar from this release. - Place the new minelights-\*.jar into your mods folder. - Install Cloth Config, here: [https://modrinth.com/mod/cloth-config](https://modrinth.com/mod/cloth-config) - **OpenRGB (optional):** The latest OpenRGB version is recommended. After installing or updating OpenRGB, restart your computer before using MineLights. Start OpenRGB, open the **SDK Server** tab, and click **Start Server**. Keep OpenRGB running while Minecraft is open. MineLights connects to the local server at `127.0.0.1:6742` (the default SDK server address and port). - Run Minecraft. - Using anything which is not OpenRGB? 1. Start Minecraft. 2. Wait for MineLights.exe to finish downloading in the background. 3. If all goes well, you will see a dialog asking you if you want to grant `MineLights.exe` permission to access the internet. 4. After accepting, your supported devices will show red. ## Full Changelog & Technical Details - Added Forge config screen integration across supported releases, with a native screen on older versions that do not use Cloth Config. - Fixed the NeoForge config screen factory for the API signature used by NeoForge 1.21.1, resolving the `AbstractMethodError` reported in [issue #30](https://github.com/megabytesme/MineLights/issues/30). - Reworked legacy Forge settings with separate category tabs, page navigation that stays within the selected tab, and a dedicated About section. - Hid Locator Bar settings before Minecraft 26.1 and End Flash settings before Minecraft 1.21.9 in applicable configuration menus. - Queued Modrinth update notices until a player is available, across Fabric, Quilt, Forge, and NeoForge. - Updated older Fabric version detection and tick callback registration, including the Modrinth update check's Minecraft version lookup. - Corrected Fabric API and Java 8 build settings for Minecraft 1.14.3, and hardened Forge and NeoForge shutdown handling.

# MineLights 2.3.8.4 This release adds Forge configuration menus, refined settings across Minecraft versions, improved reliability of the mod update checker, and fixes issues with the config screen on NeoForge. Previous server version compatible (as of 2.3.1)! ## Key Features & Major Changes - Added Forge configuration menu support, including a built-in settings screen for older Forge versions. - Fixed MineLights settings failing to open on NeoForge 1.21.1 with Mod Menu ([#30](https://github.com/megabytesme/MineLights/issues/30)). - Updated settings menus to show features available in the current Minecraft version. - Fixed update notices being dropped when the Modrinth check finished before a world was joined. ## Installation / Upgrade Instructions - DELETE your old mine-lights-\*.jar file completely. - Download the jar from this release. - Place the new minelights-\*.jar into your mods folder. - Install Cloth Config, here: [https://modrinth.com/mod/cloth-config](https://modrinth.com/mod/cloth-config) - **OpenRGB (optional):** The latest OpenRGB version is recommended. After installing or updating OpenRGB, restart your computer before using MineLights. Start OpenRGB, open the **SDK Server** tab, and click **Start Server**. Keep OpenRGB running while Minecraft is open. MineLights connects to the local server at `127.0.0.1:6742` (the default SDK server address and port). - Run Minecraft. - Using anything which is not OpenRGB? 1. Start Minecraft. 2. Wait for MineLights.exe to finish downloading in the background. 3. If all goes well, you will see a dialog asking you if you want to grant `MineLights.exe` permission to access the internet. 4. After accepting, your supported devices will show red. ## Full Changelog & Technical Details - Added Forge config screen integration across supported releases, with a native screen on older versions that do not use Cloth Config. - Fixed the NeoForge config screen factory for the API signature used by NeoForge 1.21.1, resolving the `AbstractMethodError` reported in [issue #30](https://github.com/megabytesme/MineLights/issues/30). - Reworked legacy Forge settings with separate category tabs, page navigation that stays within the selected tab, and a dedicated About section. - Hid Locator Bar settings before Minecraft 26.1 and End Flash settings before Minecraft 1.21.9 in applicable configuration menus. - Queued Modrinth update notices until a player is available, across Fabric, Quilt, Forge, and NeoForge. - Updated older Fabric version detection and tick callback registration, including the Modrinth update check's Minecraft version lookup. - Corrected Fabric API and Java 8 build settings for Minecraft 1.14.3, and hardened Forge and NeoForge shutdown handling.

# MineLights 2.3.8.3 This release adds native Forge support and expands version support across the loaders. It also fixes compatibility with OpenRGB 1.0. Previous server version compatible (as of 2.3.1)! ## Key Features & Major Changes - Added native Forge support from Minecraft 1.17.1 to 26.3 for every Minecraft version with an official Forge release. - Expanded Minecraft version support for Fabric, Quilt, and NeoForge. - Fixed OpenRGB 1.0 compatibility so MineLights discovers devices. ## Installation / Upgrade Instructions - DELETE your old mine-lights-\*.jar file completely. - Download the jar from this release. - Place the new minelights-\*.jar into your mods folder. - Install Cloth Config, here: [https://modrinth.com/mod/cloth-config](https://modrinth.com/mod/cloth-config) - **OpenRGB (optional):** The latest OpenRGB version is recommended. After installing or updating OpenRGB, restart your computer before using MineLights. Start OpenRGB, open the **SDK Server** tab, and click **Start Server**. Keep OpenRGB running while Minecraft is open. MineLights connects to the local server at `127.0.0.1:6742` (the default SDK server address and port). - Run Minecraft. - Using anything which is not OpenRGB? 1. Start Minecraft. 2. Wait for MineLights.exe to finish downloading in the background. 3. If all goes well, you will see a dialog asking you if you want to grant `MineLights.exe` permission to access the internet. 4. After accepting, your supported devices will show red. ## Full Changelog & Technical Details - Updated the loader target matrix to Fabric 1.14.3-26.3, Quilt 1.14.4-26.3, Forge 1.17.1-26.3, and NeoForge 1.20.2-26.3. Forge targets skip Minecraft versions without an official Forge release. - Added a dedicated Forge module with per-version build configuration, a Forge client entry point, configuration screen integration, and player-data compatibility overrides. - Updated shared client, effect, and network mixin code for the mappings and APIs used by the Forge versions. - Added a dedicated 1.21.11 target for Fabric, Quilt, and NeoForge, plus NeoForge targets for 1.21.10 and 1.21.11. - Updated Cloth Config and Mod Menu dependency resolution for Fabric and Quilt 1.21.11 and 26.3 builds. Quilt 26.1 and newer now declares the required Quilt Loader version range. - Updated OpenRGB protocol handling to read controller IDs from protocol 6 responses, use those IDs for device requests and lighting updates, and negotiate protocol 5 for compatibility. - Set the Fabric lighting thread as a daemon so it does not keep the client running during shutdown.

# MineLights 2.3.8.3 This release adds native Forge support and expands version support across the loaders. It also fixes compatibility with OpenRGB 1.0. Previous server version compatible (as of 2.3.1)! ## Key Features & Major Changes - Added native Forge support from Minecraft 1.17.1 to 26.3 for every Minecraft version with an official Forge release. - Expanded Minecraft version support for Fabric, Quilt, and NeoForge. - Fixed OpenRGB 1.0 compatibility so MineLights discovers devices. ## Installation / Upgrade Instructions - DELETE your old mine-lights-\*.jar file completely. - Download the jar from this release. - Place the new minelights-\*.jar into your mods folder. - Install Cloth Config, here: [https://modrinth.com/mod/cloth-config](https://modrinth.com/mod/cloth-config) - **OpenRGB (optional):** The latest OpenRGB version is recommended. After installing or updating OpenRGB, restart your computer before using MineLights. Start OpenRGB, open the **SDK Server** tab, and click **Start Server**. Keep OpenRGB running while Minecraft is open. MineLights connects to the local server at `127.0.0.1:6742` (the default SDK server address and port). - Run Minecraft. - Using anything which is not OpenRGB? 1. Start Minecraft. 2. Wait for MineLights.exe to finish downloading in the background. 3. If all goes well, you will see a dialog asking you if you want to grant `MineLights.exe` permission to access the internet. 4. After accepting, your supported devices will show red. ## Full Changelog & Technical Details - Updated the loader target matrix to Fabric 1.14.3-26.3, Quilt 1.14.4-26.3, Forge 1.17.1-26.3, and NeoForge 1.20.2-26.3. Forge targets skip Minecraft versions without an official Forge release. - Added a dedicated Forge module with per-version build configuration, a Forge client entry point, configuration screen integration, and player-data compatibility overrides. - Updated shared client, effect, and network mixin code for the mappings and APIs used by the Forge versions. - Added a dedicated 1.21.11 target for Fabric, Quilt, and NeoForge, plus NeoForge targets for 1.21.10 and 1.21.11. - Updated Cloth Config and Mod Menu dependency resolution for Fabric and Quilt 1.21.11 and 26.3 builds. Quilt 26.1 and newer now declares the required Quilt Loader version range. - Updated OpenRGB protocol handling to read controller IDs from protocol 6 responses, use those IDs for device requests and lighting updates, and negotiate protocol 5 for compatibility. - Set the Fabric lighting thread as a daemon so it does not keep the client running during shutdown.

# MineLights 2.3.8.3 This release adds native Forge support and expands version support across the loaders. It also fixes compatibility with OpenRGB 1.0. Previous server version compatible (as of 2.3.1)! ## Key Features & Major Changes - Added native Forge support from Minecraft 1.17.1 to 26.3 for every Minecraft version with an official Forge release. - Expanded Minecraft version support for Fabric, Quilt, and NeoForge. - Fixed OpenRGB 1.0 compatibility so MineLights discovers devices. ## Installation / Upgrade Instructions - DELETE your old mine-lights-\*.jar file completely. - Download the jar from this release. - Place the new minelights-\*.jar into your mods folder. - Install Cloth Config, here: [https://modrinth.com/mod/cloth-config](https://modrinth.com/mod/cloth-config) - **OpenRGB (optional):** The latest OpenRGB version is recommended. After installing or updating OpenRGB, restart your computer before using MineLights. Start OpenRGB, open the **SDK Server** tab, and click **Start Server**. Keep OpenRGB running while Minecraft is open. MineLights connects to the local server at `127.0.0.1:6742` (the default SDK server address and port). - Run Minecraft. - Using anything which is not OpenRGB? 1. Start Minecraft. 2. Wait for MineLights.exe to finish downloading in the background. 3. If all goes well, you will see a dialog asking you if you want to grant `MineLights.exe` permission to access the internet. 4. After accepting, your supported devices will show red. ## Full Changelog & Technical Details - Updated the loader target matrix to Fabric 1.14.3-26.3, Quilt 1.14.4-26.3, Forge 1.17.1-26.3, and NeoForge 1.20.2-26.3. Forge targets skip Minecraft versions without an official Forge release. - Added a dedicated Forge module with per-version build configuration, a Forge client entry point, configuration screen integration, and player-data compatibility overrides. - Updated shared client, effect, and network mixin code for the mappings and APIs used by the Forge versions. - Added a dedicated 1.21.11 target for Fabric, Quilt, and NeoForge, plus NeoForge targets for 1.21.10 and 1.21.11. - Updated Cloth Config and Mod Menu dependency resolution for Fabric and Quilt 1.21.11 and 26.3 builds. Quilt 26.1 and newer now declares the required Quilt Loader version range. - Updated OpenRGB protocol handling to read controller IDs from protocol 6 responses, use those IDs for device requests and lighting updates, and negotiate protocol 5 for compatibility. - Set the Fabric lighting thread as a daemon so it does not keep the client running during shutdown.

# MineLights 2.3.8.3 This release adds native Forge support and expands version support across the loaders. It also fixes compatibility with OpenRGB 1.0. Previous server version compatible (as of 2.3.1)! ## Key Features & Major Changes - Added native Forge support from Minecraft 1.17.1 to 26.3 for every Minecraft version with an official Forge release. - Expanded Minecraft version support for Fabric, Quilt, and NeoForge. - Fixed OpenRGB 1.0 compatibility so MineLights discovers devices. ## Installation / Upgrade Instructions - DELETE your old mine-lights-\*.jar file completely. - Download the jar from this release. - Place the new minelights-\*.jar into your mods folder. - Install Cloth Config, here: [https://modrinth.com/mod/cloth-config](https://modrinth.com/mod/cloth-config) - **OpenRGB (optional):** The latest OpenRGB version is recommended. After installing or updating OpenRGB, restart your computer before using MineLights. Start OpenRGB, open the **SDK Server** tab, and click **Start Server**. Keep OpenRGB running while Minecraft is open. MineLights connects to the local server at `127.0.0.1:6742` (the default SDK server address and port). - Run Minecraft. - Using anything which is not OpenRGB? 1. Start Minecraft. 2. Wait for MineLights.exe to finish downloading in the background. 3. If all goes well, you will see a dialog asking you if you want to grant `MineLights.exe` permission to access the internet. 4. After accepting, your supported devices will show red. ## Full Changelog & Technical Details - Updated the loader target matrix to Fabric 1.14.3-26.3, Quilt 1.14.4-26.3, Forge 1.17.1-26.3, and NeoForge 1.20.2-26.3. Forge targets skip Minecraft versions without an official Forge release. - Added a dedicated Forge module with per-version build configuration, a Forge client entry point, configuration screen integration, and player-data compatibility overrides. - Updated shared client, effect, and network mixin code for the mappings and APIs used by the Forge versions. - Added a dedicated 1.21.11 target for Fabric, Quilt, and NeoForge, plus NeoForge targets for 1.21.10 and 1.21.11. - Updated Cloth Config and Mod Menu dependency resolution for Fabric and Quilt 1.21.11 and 26.3 builds. Quilt 26.1 and newer now declares the required Quilt Loader version range. - Updated OpenRGB protocol handling to read controller IDs from protocol 6 responses, use those IDs for device requests and lighting updates, and negotiate protocol 5 for compatibility. - Set the Fabric lighting thread as a daemon so it does not keep the client running during shutdown.

# MineLights 2.3.8.3 This release adds native Forge support and expands version support across the loaders. It also fixes compatibility with OpenRGB 1.0. Previous server version compatible (as of 2.3.1)! ## Key Features & Major Changes - Added native Forge support from Minecraft 1.17.1 to 26.3 for every Minecraft version with an official Forge release. - Expanded Minecraft version support for Fabric, Quilt, and NeoForge. - Fixed OpenRGB 1.0 compatibility so MineLights discovers devices. ## Installation / Upgrade Instructions - DELETE your old mine-lights-\*.jar file completely. - Download the jar from this release. - Place the new minelights-\*.jar into your mods folder. - Install Cloth Config, here: [https://modrinth.com/mod/cloth-config](https://modrinth.com/mod/cloth-config) - **OpenRGB (optional):** The latest OpenRGB version is recommended. After installing or updating OpenRGB, restart your computer before using MineLights. Start OpenRGB, open the **SDK Server** tab, and click **Start Server**. Keep OpenRGB running while Minecraft is open. MineLights connects to the local server at `127.0.0.1:6742` (the default SDK server address and port). - Run Minecraft. - Using anything which is not OpenRGB? 1. Start Minecraft. 2. Wait for MineLights.exe to finish downloading in the background. 3. If all goes well, you will see a dialog asking you if you want to grant `MineLights.exe` permission to access the internet. 4. After accepting, your supported devices will show red. ## Full Changelog & Technical Details - Updated the loader target matrix to Fabric 1.14.3-26.3, Quilt 1.14.4-26.3, Forge 1.17.1-26.3, and NeoForge 1.20.2-26.3. Forge targets skip Minecraft versions without an official Forge release. - Added a dedicated Forge module with per-version build configuration, a Forge client entry point, configuration screen integration, and player-data compatibility overrides. - Updated shared client, effect, and network mixin code for the mappings and APIs used by the Forge versions. - Added a dedicated 1.21.11 target for Fabric, Quilt, and NeoForge, plus NeoForge targets for 1.21.10 and 1.21.11. - Updated Cloth Config and Mod Menu dependency resolution for Fabric and Quilt 1.21.11 and 26.3 builds. Quilt 26.1 and newer now declares the required Quilt Loader version range. - Updated OpenRGB protocol handling to read controller IDs from protocol 6 responses, use those IDs for device requests and lighting updates, and negotiate protocol 5 for compatibility. - Set the Fabric lighting thread as a daemon so it does not keep the client running during shutdown.

# MineLights 2.3.8.3 This release adds native Forge support and expands version support across the loaders. It also fixes compatibility with OpenRGB 1.0. Previous server version compatible (as of 2.3.1)! ## Key Features & Major Changes - Added native Forge support from Minecraft 1.17.1 to 26.3 for every Minecraft version with an official Forge release. - Expanded Minecraft version support for Fabric, Quilt, and NeoForge. - Fixed OpenRGB 1.0 compatibility so MineLights discovers devices. ## Installation / Upgrade Instructions - DELETE your old mine-lights-\*.jar file completely. - Download the jar from this release. - Place the new minelights-\*.jar into your mods folder. - Install Cloth Config, here: [https://modrinth.com/mod/cloth-config](https://modrinth.com/mod/cloth-config) - **OpenRGB (optional):** The latest OpenRGB version is recommended. After installing or updating OpenRGB, restart your computer before using MineLights. Start OpenRGB, open the **SDK Server** tab, and click **Start Server**. Keep OpenRGB running while Minecraft is open. MineLights connects to the local server at `127.0.0.1:6742` (the default SDK server address and port). - Run Minecraft. - Using anything which is not OpenRGB? 1. Start Minecraft. 2. Wait for MineLights.exe to finish downloading in the background. 3. If all goes well, you will see a dialog asking you if you want to grant `MineLights.exe` permission to access the internet. 4. After accepting, your supported devices will show red. ## Full Changelog & Technical Details - Updated the loader target matrix to Fabric 1.14.3-26.3, Quilt 1.14.4-26.3, Forge 1.17.1-26.3, and NeoForge 1.20.2-26.3. Forge targets skip Minecraft versions without an official Forge release. - Added a dedicated Forge module with per-version build configuration, a Forge client entry point, configuration screen integration, and player-data compatibility overrides. - Updated shared client, effect, and network mixin code for the mappings and APIs used by the Forge versions. - Added a dedicated 1.21.11 target for Fabric, Quilt, and NeoForge, plus NeoForge targets for 1.21.10 and 1.21.11. - Updated Cloth Config and Mod Menu dependency resolution for Fabric and Quilt 1.21.11 and 26.3 builds. Quilt 26.1 and newer now declares the required Quilt Loader version range. - Updated OpenRGB protocol handling to read controller IDs from protocol 6 responses, use those IDs for device requests and lighting updates, and negotiate protocol 5 for compatibility. - Set the Fabric lighting thread as a daemon so it does not keep the client running during shutdown.

# MineLights 2.3.8.3 This release adds native Forge support and expands version support across the loaders. It also fixes compatibility with OpenRGB 1.0. Previous server version compatible (as of 2.3.1)! ## Key Features & Major Changes - Added native Forge support from Minecraft 1.17.1 to 26.3 for every Minecraft version with an official Forge release. - Expanded Minecraft version support for Fabric, Quilt, and NeoForge. - Fixed OpenRGB 1.0 compatibility so MineLights discovers devices. ## Installation / Upgrade Instructions - DELETE your old mine-lights-\*.jar file completely. - Download the jar from this release. - Place the new minelights-\*.jar into your mods folder. - Install Cloth Config, here: [https://modrinth.com/mod/cloth-config](https://modrinth.com/mod/cloth-config) - **OpenRGB (optional):** The latest OpenRGB version is recommended. After installing or updating OpenRGB, restart your computer before using MineLights. Start OpenRGB, open the **SDK Server** tab, and click **Start Server**. Keep OpenRGB running while Minecraft is open. MineLights connects to the local server at `127.0.0.1:6742` (the default SDK server address and port). - Run Minecraft. - Using anything which is not OpenRGB? 1. Start Minecraft. 2. Wait for MineLights.exe to finish downloading in the background. 3. If all goes well, you will see a dialog asking you if you want to grant `MineLights.exe` permission to access the internet. 4. After accepting, your supported devices will show red. ## Full Changelog & Technical Details - Updated the loader target matrix to Fabric 1.14.3-26.3, Quilt 1.14.4-26.3, Forge 1.17.1-26.3, and NeoForge 1.20.2-26.3. Forge targets skip Minecraft versions without an official Forge release. - Added a dedicated Forge module with per-version build configuration, a Forge client entry point, configuration screen integration, and player-data compatibility overrides. - Updated shared client, effect, and network mixin code for the mappings and APIs used by the Forge versions. - Added a dedicated 1.21.11 target for Fabric, Quilt, and NeoForge, plus NeoForge targets for 1.21.10 and 1.21.11. - Updated Cloth Config and Mod Menu dependency resolution for Fabric and Quilt 1.21.11 and 26.3 builds. Quilt 26.1 and newer now declares the required Quilt Loader version range. - Updated OpenRGB protocol handling to read controller IDs from protocol 6 responses, use those IDs for device requests and lighting updates, and negotiate protocol 5 for compatibility. - Set the Fabric lighting thread as a daemon so it does not keep the client running during shutdown.

# MineLights 2.3.8.3 This release adds native Forge support and expands version support across the loaders. It also fixes compatibility with OpenRGB 1.0. Previous server version compatible (as of 2.3.1)! ## Key Features & Major Changes - Added native Forge support from Minecraft 1.17.1 to 26.3 for every Minecraft version with an official Forge release. - Expanded Minecraft version support for Fabric, Quilt, and NeoForge. - Fixed OpenRGB 1.0 compatibility so MineLights discovers devices. ## Installation / Upgrade Instructions - DELETE your old mine-lights-\*.jar file completely. - Download the jar from this release. - Place the new minelights-\*.jar into your mods folder. - Install Cloth Config, here: [https://modrinth.com/mod/cloth-config](https://modrinth.com/mod/cloth-config) - **OpenRGB (optional):** The latest OpenRGB version is recommended. After installing or updating OpenRGB, restart your computer before using MineLights. Start OpenRGB, open the **SDK Server** tab, and click **Start Server**. Keep OpenRGB running while Minecraft is open. MineLights connects to the local server at `127.0.0.1:6742` (the default SDK server address and port). - Run Minecraft. - Using anything which is not OpenRGB? 1. Start Minecraft. 2. Wait for MineLights.exe to finish downloading in the background. 3. If all goes well, you will see a dialog asking you if you want to grant `MineLights.exe` permission to access the internet. 4. After accepting, your supported devices will show red. ## Full Changelog & Technical Details - Updated the loader target matrix to Fabric 1.14.3-26.3, Quilt 1.14.4-26.3, Forge 1.17.1-26.3, and NeoForge 1.20.2-26.3. Forge targets skip Minecraft versions without an official Forge release. - Added a dedicated Forge module with per-version build configuration, a Forge client entry point, configuration screen integration, and player-data compatibility overrides. - Updated shared client, effect, and network mixin code for the mappings and APIs used by the Forge versions. - Added a dedicated 1.21.11 target for Fabric, Quilt, and NeoForge, plus NeoForge targets for 1.21.10 and 1.21.11. - Updated Cloth Config and Mod Menu dependency resolution for Fabric and Quilt 1.21.11 and 26.3 builds. Quilt 26.1 and newer now declares the required Quilt Loader version range. - Updated OpenRGB protocol handling to read controller IDs from protocol 6 responses, use those IDs for device requests and lighting updates, and negotiate protocol 5 for compatibility. - Set the Fabric lighting thread as a daemon so it does not keep the client running during shutdown.

# MineLights 2.3.8.3 This release adds native Forge support and expands version support across the loaders. It also fixes compatibility with OpenRGB 1.0. Previous server version compatible (as of 2.3.1)! ## Key Features & Major Changes - Added native Forge support from Minecraft 1.17.1 to 26.3 for every Minecraft version with an official Forge release. - Expanded Minecraft version support for Fabric, Quilt, and NeoForge. - Fixed OpenRGB 1.0 compatibility so MineLights discovers devices. ## Installation / Upgrade Instructions - DELETE your old mine-lights-\*.jar file completely. - Download the jar from this release. - Place the new minelights-\*.jar into your mods folder. - Install Cloth Config, here: [https://modrinth.com/mod/cloth-config](https://modrinth.com/mod/cloth-config) - **OpenRGB (optional):** The latest OpenRGB version is recommended. After installing or updating OpenRGB, restart your computer before using MineLights. Start OpenRGB, open the **SDK Server** tab, and click **Start Server**. Keep OpenRGB running while Minecraft is open. MineLights connects to the local server at `127.0.0.1:6742` (the default SDK server address and port). - Run Minecraft. - Using anything which is not OpenRGB? 1. Start Minecraft. 2. Wait for MineLights.exe to finish downloading in the background. 3. If all goes well, you will see a dialog asking you if you want to grant `MineLights.exe` permission to access the internet. 4. After accepting, your supported devices will show red. ## Full Changelog & Technical Details - Updated the loader target matrix to Fabric 1.14.3-26.3, Quilt 1.14.4-26.3, Forge 1.17.1-26.3, and NeoForge 1.20.2-26.3. Forge targets skip Minecraft versions without an official Forge release. - Added a dedicated Forge module with per-version build configuration, a Forge client entry point, configuration screen integration, and player-data compatibility overrides. - Updated shared client, effect, and network mixin code for the mappings and APIs used by the Forge versions. - Added a dedicated 1.21.11 target for Fabric, Quilt, and NeoForge, plus NeoForge targets for 1.21.10 and 1.21.11. - Updated Cloth Config and Mod Menu dependency resolution for Fabric and Quilt 1.21.11 and 26.3 builds. Quilt 26.1 and newer now declares the required Quilt Loader version range. - Updated OpenRGB protocol handling to read controller IDs from protocol 6 responses, use those IDs for device requests and lighting updates, and negotiate protocol 5 for compatibility. - Set the Fabric lighting thread as a daemon so it does not keep the client running during shutdown.

# MineLights 2.3.8.3 This release adds native Forge support and expands version support across the loaders. It also fixes compatibility with OpenRGB 1.0. Previous server version compatible (as of 2.3.1)! ## Key Features & Major Changes - Added native Forge support from Minecraft 1.17.1 to 26.3 for every Minecraft version with an official Forge release. - Expanded Minecraft version support for Fabric, Quilt, and NeoForge. - Fixed OpenRGB 1.0 compatibility so MineLights discovers devices. ## Installation / Upgrade Instructions - DELETE your old mine-lights-\*.jar file completely. - Download the jar from this release. - Place the new minelights-\*.jar into your mods folder. - Install Cloth Config, here: [https://modrinth.com/mod/cloth-config](https://modrinth.com/mod/cloth-config) - **OpenRGB (optional):** The latest OpenRGB version is recommended. After installing or updating OpenRGB, restart your computer before using MineLights. Start OpenRGB, open the **SDK Server** tab, and click **Start Server**. Keep OpenRGB running while Minecraft is open. MineLights connects to the local server at `127.0.0.1:6742` (the default SDK server address and port). - Run Minecraft. - Using anything which is not OpenRGB? 1. Start Minecraft. 2. Wait for MineLights.exe to finish downloading in the background. 3. If all goes well, you will see a dialog asking you if you want to grant `MineLights.exe` permission to access the internet. 4. After accepting, your supported devices will show red. ## Full Changelog & Technical Details - Updated the loader target matrix to Fabric 1.14.3-26.3, Quilt 1.14.4-26.3, Forge 1.17.1-26.3, and NeoForge 1.20.2-26.3. Forge targets skip Minecraft versions without an official Forge release. - Added a dedicated Forge module with per-version build configuration, a Forge client entry point, configuration screen integration, and player-data compatibility overrides. - Updated shared client, effect, and network mixin code for the mappings and APIs used by the Forge versions. - Added a dedicated 1.21.11 target for Fabric, Quilt, and NeoForge, plus NeoForge targets for 1.21.10 and 1.21.11. - Updated Cloth Config and Mod Menu dependency resolution for Fabric and Quilt 1.21.11 and 26.3 builds. Quilt 26.1 and newer now declares the required Quilt Loader version range. - Updated OpenRGB protocol handling to read controller IDs from protocol 6 responses, use those IDs for device requests and lighting updates, and negotiate protocol 5 for compatibility. - Set the Fabric lighting thread as a daemon so it does not keep the client running during shutdown.

# MineLights 2.3.8.3 This release adds native Forge support and expands version support across the loaders. It also fixes compatibility with OpenRGB 1.0. Previous server version compatible (as of 2.3.1)! ## Key Features & Major Changes - Added native Forge support from Minecraft 1.17.1 to 26.3 for every Minecraft version with an official Forge release. - Expanded Minecraft version support for Fabric, Quilt, and NeoForge. - Fixed OpenRGB 1.0 compatibility so MineLights discovers devices. ## Installation / Upgrade Instructions - DELETE your old mine-lights-\*.jar file completely. - Download the jar from this release. - Place the new minelights-\*.jar into your mods folder. - Install Cloth Config, here: [https://modrinth.com/mod/cloth-config](https://modrinth.com/mod/cloth-config) - **OpenRGB (optional):** The latest OpenRGB version is recommended. After installing or updating OpenRGB, restart your computer before using MineLights. Start OpenRGB, open the **SDK Server** tab, and click **Start Server**. Keep OpenRGB running while Minecraft is open. MineLights connects to the local server at `127.0.0.1:6742` (the default SDK server address and port). - Run Minecraft. - Using anything which is not OpenRGB? 1. Start Minecraft. 2. Wait for MineLights.exe to finish downloading in the background. 3. If all goes well, you will see a dialog asking you if you want to grant `MineLights.exe` permission to access the internet. 4. After accepting, your supported devices will show red. ## Full Changelog & Technical Details - Updated the loader target matrix to Fabric 1.14.3-26.3, Quilt 1.14.4-26.3, Forge 1.17.1-26.3, and NeoForge 1.20.2-26.3. Forge targets skip Minecraft versions without an official Forge release. - Added a dedicated Forge module with per-version build configuration, a Forge client entry point, configuration screen integration, and player-data compatibility overrides. - Updated shared client, effect, and network mixin code for the mappings and APIs used by the Forge versions. - Added a dedicated 1.21.11 target for Fabric, Quilt, and NeoForge, plus NeoForge targets for 1.21.10 and 1.21.11. - Updated Cloth Config and Mod Menu dependency resolution for Fabric and Quilt 1.21.11 and 26.3 builds. Quilt 26.1 and newer now declares the required Quilt Loader version range. - Updated OpenRGB protocol handling to read controller IDs from protocol 6 responses, use those IDs for device requests and lighting updates, and negotiate protocol 5 for compatibility. - Set the Fabric lighting thread as a daemon so it does not keep the client running during shutdown.

# MineLights 2.3.8.3 This release adds native Forge support and expands version support across the loaders. It also fixes compatibility with OpenRGB 1.0. Previous server version compatible (as of 2.3.1)! ## Key Features & Major Changes - Added native Forge support from Minecraft 1.17.1 to 26.3 for every Minecraft version with an official Forge release. - Expanded Minecraft version support for Fabric, Quilt, and NeoForge. - Fixed OpenRGB 1.0 compatibility so MineLights discovers devices. ## Installation / Upgrade Instructions - DELETE your old mine-lights-\*.jar file completely. - Download the jar from this release. - Place the new minelights-\*.jar into your mods folder. - Install Cloth Config, here: [https://modrinth.com/mod/cloth-config](https://modrinth.com/mod/cloth-config) - **OpenRGB (optional):** The latest OpenRGB version is recommended. After installing or updating OpenRGB, restart your computer before using MineLights. Start OpenRGB, open the **SDK Server** tab, and click **Start Server**. Keep OpenRGB running while Minecraft is open. MineLights connects to the local server at `127.0.0.1:6742` (the default SDK server address and port). - Run Minecraft. - Using anything which is not OpenRGB? 1. Start Minecraft. 2. Wait for MineLights.exe to finish downloading in the background. 3. If all goes well, you will see a dialog asking you if you want to grant `MineLights.exe` permission to access the internet. 4. After accepting, your supported devices will show red. ## Full Changelog & Technical Details - Updated the loader target matrix to Fabric 1.14.3-26.3, Quilt 1.14.4-26.3, Forge 1.17.1-26.3, and NeoForge 1.20.2-26.3. Forge targets skip Minecraft versions without an official Forge release. - Added a dedicated Forge module with per-version build configuration, a Forge client entry point, configuration screen integration, and player-data compatibility overrides. - Updated shared client, effect, and network mixin code for the mappings and APIs used by the Forge versions. - Added a dedicated 1.21.11 target for Fabric, Quilt, and NeoForge, plus NeoForge targets for 1.21.10 and 1.21.11. - Updated Cloth Config and Mod Menu dependency resolution for Fabric and Quilt 1.21.11 and 26.3 builds. Quilt 26.1 and newer now declares the required Quilt Loader version range. - Updated OpenRGB protocol handling to read controller IDs from protocol 6 responses, use those IDs for device requests and lighting updates, and negotiate protocol 5 for compatibility. - Set the Fabric lighting thread as a daemon so it does not keep the client running during shutdown.

# MineLights 2.3.8.3 This release adds native Forge support and expands version support across the loaders. It also fixes compatibility with OpenRGB 1.0. Previous server version compatible (as of 2.3.1)! ## Key Features & Major Changes - Added native Forge support from Minecraft 1.17.1 to 26.3 for every Minecraft version with an official Forge release. - Expanded Minecraft version support for Fabric, Quilt, and NeoForge. - Fixed OpenRGB 1.0 compatibility so MineLights discovers devices. ## Installation / Upgrade Instructions - DELETE your old mine-lights-\*.jar file completely. - Download the jar from this release. - Place the new minelights-\*.jar into your mods folder. - Install Cloth Config, here: [https://modrinth.com/mod/cloth-config](https://modrinth.com/mod/cloth-config) - **OpenRGB (optional):** The latest OpenRGB version is recommended. After installing or updating OpenRGB, restart your computer before using MineLights. Start OpenRGB, open the **SDK Server** tab, and click **Start Server**. Keep OpenRGB running while Minecraft is open. MineLights connects to the local server at `127.0.0.1:6742` (the default SDK server address and port). - Run Minecraft. - Using anything which is not OpenRGB? 1. Start Minecraft. 2. Wait for MineLights.exe to finish downloading in the background. 3. If all goes well, you will see a dialog asking you if you want to grant `MineLights.exe` permission to access the internet. 4. After accepting, your supported devices will show red. ## Full Changelog & Technical Details - Updated the loader target matrix to Fabric 1.14.3-26.3, Quilt 1.14.4-26.3, Forge 1.17.1-26.3, and NeoForge 1.20.2-26.3. Forge targets skip Minecraft versions without an official Forge release. - Added a dedicated Forge module with per-version build configuration, a Forge client entry point, configuration screen integration, and player-data compatibility overrides. - Updated shared client, effect, and network mixin code for the mappings and APIs used by the Forge versions. - Added a dedicated 1.21.11 target for Fabric, Quilt, and NeoForge, plus NeoForge targets for 1.21.10 and 1.21.11. - Updated Cloth Config and Mod Menu dependency resolution for Fabric and Quilt 1.21.11 and 26.3 builds. Quilt 26.1 and newer now declares the required Quilt Loader version range. - Updated OpenRGB protocol handling to read controller IDs from protocol 6 responses, use those IDs for device requests and lighting updates, and negotiate protocol 5 for compatibility. - Set the Fabric lighting thread as a daemon so it does not keep the client running during shutdown.

# MineLights 2.3.8.3 This release adds native Forge support and expands version support across the loaders. It also fixes compatibility with OpenRGB 1.0. Previous server version compatible (as of 2.3.1)! ## Key Features & Major Changes - Added native Forge support from Minecraft 1.17.1 to 26.3 for every Minecraft version with an official Forge release. - Expanded Minecraft version support for Fabric, Quilt, and NeoForge. - Fixed OpenRGB 1.0 compatibility so MineLights discovers devices. ## Installation / Upgrade Instructions - DELETE your old mine-lights-\*.jar file completely. - Download the jar from this release. - Place the new minelights-\*.jar into your mods folder. - Install Cloth Config, here: [https://modrinth.com/mod/cloth-config](https://modrinth.com/mod/cloth-config) - **OpenRGB (optional):** The latest OpenRGB version is recommended. After installing or updating OpenRGB, restart your computer before using MineLights. Start OpenRGB, open the **SDK Server** tab, and click **Start Server**. Keep OpenRGB running while Minecraft is open. MineLights connects to the local server at `127.0.0.1:6742` (the default SDK server address and port). - Run Minecraft. - Using anything which is not OpenRGB? 1. Start Minecraft. 2. Wait for MineLights.exe to finish downloading in the background. 3. If all goes well, you will see a dialog asking you if you want to grant `MineLights.exe` permission to access the internet. 4. After accepting, your supported devices will show red. ## Full Changelog & Technical Details - Updated the loader target matrix to Fabric 1.14.3-26.3, Quilt 1.14.4-26.3, Forge 1.17.1-26.3, and NeoForge 1.20.2-26.3. Forge targets skip Minecraft versions without an official Forge release. - Added a dedicated Forge module with per-version build configuration, a Forge client entry point, configuration screen integration, and player-data compatibility overrides. - Updated shared client, effect, and network mixin code for the mappings and APIs used by the Forge versions. - Added a dedicated 1.21.11 target for Fabric, Quilt, and NeoForge, plus NeoForge targets for 1.21.10 and 1.21.11. - Updated Cloth Config and Mod Menu dependency resolution for Fabric and Quilt 1.21.11 and 26.3 builds. Quilt 26.1 and newer now declares the required Quilt Loader version range. - Updated OpenRGB protocol handling to read controller IDs from protocol 6 responses, use those IDs for device requests and lighting updates, and negotiate protocol 5 for compatibility. - Set the Fabric lighting thread as a daemon so it does not keep the client running during shutdown.

# MineLights 2.3.8.3 This release adds native Forge support and expands version support across the loaders. It also fixes compatibility with OpenRGB 1.0. Previous server version compatible (as of 2.3.1)! ## Key Features & Major Changes - Added native Forge support from Minecraft 1.17.1 to 26.3 for every Minecraft version with an official Forge release. - Expanded Minecraft version support for Fabric, Quilt, and NeoForge. - Fixed OpenRGB 1.0 compatibility so MineLights discovers devices. ## Installation / Upgrade Instructions - DELETE your old mine-lights-\*.jar file completely. - Download the jar from this release. - Place the new minelights-\*.jar into your mods folder. - Install Cloth Config, here: [https://modrinth.com/mod/cloth-config](https://modrinth.com/mod/cloth-config) - **OpenRGB (optional):** The latest OpenRGB version is recommended. After installing or updating OpenRGB, restart your computer before using MineLights. Start OpenRGB, open the **SDK Server** tab, and click **Start Server**. Keep OpenRGB running while Minecraft is open. MineLights connects to the local server at `127.0.0.1:6742` (the default SDK server address and port). - Run Minecraft. - Using anything which is not OpenRGB? 1. Start Minecraft. 2. Wait for MineLights.exe to finish downloading in the background. 3. If all goes well, you will see a dialog asking you if you want to grant `MineLights.exe` permission to access the internet. 4. After accepting, your supported devices will show red. ## Full Changelog & Technical Details - Updated the loader target matrix to Fabric 1.14.3-26.3, Quilt 1.14.4-26.3, Forge 1.17.1-26.3, and NeoForge 1.20.2-26.3. Forge targets skip Minecraft versions without an official Forge release. - Added a dedicated Forge module with per-version build configuration, a Forge client entry point, configuration screen integration, and player-data compatibility overrides. - Updated shared client, effect, and network mixin code for the mappings and APIs used by the Forge versions. - Added a dedicated 1.21.11 target for Fabric, Quilt, and NeoForge, plus NeoForge targets for 1.21.10 and 1.21.11. - Updated Cloth Config and Mod Menu dependency resolution for Fabric and Quilt 1.21.11 and 26.3 builds. Quilt 26.1 and newer now declares the required Quilt Loader version range. - Updated OpenRGB protocol handling to read controller IDs from protocol 6 responses, use those IDs for device requests and lighting updates, and negotiate protocol 5 for compatibility. - Set the Fabric lighting thread as a daemon so it does not keep the client running during shutdown.

# MineLights 2.3.8.3 This release adds native Forge support and expands version support across the loaders. It also fixes compatibility with OpenRGB 1.0. Previous server version compatible (as of 2.3.1)! ## Key Features & Major Changes - Added native Forge support from Minecraft 1.17.1 to 26.3 for every Minecraft version with an official Forge release. - Expanded Minecraft version support for Fabric, Quilt, and NeoForge. - Fixed OpenRGB 1.0 compatibility so MineLights discovers devices. ## Installation / Upgrade Instructions - DELETE your old mine-lights-\*.jar file completely. - Download the jar from this release. - Place the new minelights-\*.jar into your mods folder. - Install Cloth Config, here: [https://modrinth.com/mod/cloth-config](https://modrinth.com/mod/cloth-config) - **OpenRGB (optional):** The latest OpenRGB version is recommended. After installing or updating OpenRGB, restart your computer before using MineLights. Start OpenRGB, open the **SDK Server** tab, and click **Start Server**. Keep OpenRGB running while Minecraft is open. MineLights connects to the local server at `127.0.0.1:6742` (the default SDK server address and port). - Run Minecraft. - Using anything which is not OpenRGB? 1. Start Minecraft. 2. Wait for MineLights.exe to finish downloading in the background. 3. If all goes well, you will see a dialog asking you if you want to grant `MineLights.exe` permission to access the internet. 4. After accepting, your supported devices will show red. ## Full Changelog & Technical Details - Updated the loader target matrix to Fabric 1.14.3-26.3, Quilt 1.14.4-26.3, Forge 1.17.1-26.3, and NeoForge 1.20.2-26.3. Forge targets skip Minecraft versions without an official Forge release. - Added a dedicated Forge module with per-version build configuration, a Forge client entry point, configuration screen integration, and player-data compatibility overrides. - Updated shared client, effect, and network mixin code for the mappings and APIs used by the Forge versions. - Added a dedicated 1.21.11 target for Fabric, Quilt, and NeoForge, plus NeoForge targets for 1.21.10 and 1.21.11. - Updated Cloth Config and Mod Menu dependency resolution for Fabric and Quilt 1.21.11 and 26.3 builds. Quilt 26.1 and newer now declares the required Quilt Loader version range. - Updated OpenRGB protocol handling to read controller IDs from protocol 6 responses, use those IDs for device requests and lighting updates, and negotiate protocol 5 for compatibility. - Set the Fabric lighting thread as a daemon so it does not keep the client running during shutdown.

# MineLights 2.3.8.3 This release adds native Forge support and expands version support across the loaders. It also fixes compatibility with OpenRGB 1.0. Previous server version compatible (as of 2.3.1)! ## Key Features & Major Changes - Added native Forge support from Minecraft 1.17.1 to 26.3 for every Minecraft version with an official Forge release. - Expanded Minecraft version support for Fabric, Quilt, and NeoForge. - Fixed OpenRGB 1.0 compatibility so MineLights discovers devices. ## Installation / Upgrade Instructions - DELETE your old mine-lights-\*.jar file completely. - Download the jar from this release. - Place the new minelights-\*.jar into your mods folder. - Install Cloth Config, here: [https://modrinth.com/mod/cloth-config](https://modrinth.com/mod/cloth-config) - **OpenRGB (optional):** The latest OpenRGB version is recommended. After installing or updating OpenRGB, restart your computer before using MineLights. Start OpenRGB, open the **SDK Server** tab, and click **Start Server**. Keep OpenRGB running while Minecraft is open. MineLights connects to the local server at `127.0.0.1:6742` (the default SDK server address and port). - Run Minecraft. - Using anything which is not OpenRGB? 1. Start Minecraft. 2. Wait for MineLights.exe to finish downloading in the background. 3. If all goes well, you will see a dialog asking you if you want to grant `MineLights.exe` permission to access the internet. 4. After accepting, your supported devices will show red. ## Full Changelog & Technical Details - Updated the loader target matrix to Fabric 1.14.3-26.3, Quilt 1.14.4-26.3, Forge 1.17.1-26.3, and NeoForge 1.20.2-26.3. Forge targets skip Minecraft versions without an official Forge release. - Added a dedicated Forge module with per-version build configuration, a Forge client entry point, configuration screen integration, and player-data compatibility overrides. - Updated shared client, effect, and network mixin code for the mappings and APIs used by the Forge versions. - Added a dedicated 1.21.11 target for Fabric, Quilt, and NeoForge, plus NeoForge targets for 1.21.10 and 1.21.11. - Updated Cloth Config and Mod Menu dependency resolution for Fabric and Quilt 1.21.11 and 26.3 builds. Quilt 26.1 and newer now declares the required Quilt Loader version range. - Updated OpenRGB protocol handling to read controller IDs from protocol 6 responses, use those IDs for device requests and lighting updates, and negotiate protocol 5 for compatibility. - Set the Fabric lighting thread as a daemon so it does not keep the client running during shutdown.

# MineLights 2.3.8.3 This release adds native Forge support and expands version support across the loaders. It also fixes compatibility with OpenRGB 1.0. Previous server version compatible (as of 2.3.1)! ## Key Features & Major Changes - Added native Forge support from Minecraft 1.17.1 to 26.3 for every Minecraft version with an official Forge release. - Expanded Minecraft version support for Fabric, Quilt, and NeoForge. - Fixed OpenRGB 1.0 compatibility so MineLights discovers devices. ## Installation / Upgrade Instructions - DELETE your old mine-lights-\*.jar file completely. - Download the jar from this release. - Place the new minelights-\*.jar into your mods folder. - Install Cloth Config, here: [https://modrinth.com/mod/cloth-config](https://modrinth.com/mod/cloth-config) - **OpenRGB (optional):** The latest OpenRGB version is recommended. After installing or updating OpenRGB, restart your computer before using MineLights. Start OpenRGB, open the **SDK Server** tab, and click **Start Server**. Keep OpenRGB running while Minecraft is open. MineLights connects to the local server at `127.0.0.1:6742` (the default SDK server address and port). - Run Minecraft. - Using anything which is not OpenRGB? 1. Start Minecraft. 2. Wait for MineLights.exe to finish downloading in the background. 3. If all goes well, you will see a dialog asking you if you want to grant `MineLights.exe` permission to access the internet. 4. After accepting, your supported devices will show red. ## Full Changelog & Technical Details - Updated the loader target matrix to Fabric 1.14.3-26.3, Quilt 1.14.4-26.3, Forge 1.17.1-26.3, and NeoForge 1.20.2-26.3. Forge targets skip Minecraft versions without an official Forge release. - Added a dedicated Forge module with per-version build configuration, a Forge client entry point, configuration screen integration, and player-data compatibility overrides. - Updated shared client, effect, and network mixin code for the mappings and APIs used by the Forge versions. - Added a dedicated 1.21.11 target for Fabric, Quilt, and NeoForge, plus NeoForge targets for 1.21.10 and 1.21.11. - Updated Cloth Config and Mod Menu dependency resolution for Fabric and Quilt 1.21.11 and 26.3 builds. Quilt 26.1 and newer now declares the required Quilt Loader version range. - Updated OpenRGB protocol handling to read controller IDs from protocol 6 responses, use those IDs for device requests and lighting updates, and negotiate protocol 5 for compatibility. - Set the Fabric lighting thread as a daemon so it does not keep the client running during shutdown.

# MineLights 2.3.8.3 This release adds native Forge support and expands version support across the loaders. It also fixes compatibility with OpenRGB 1.0. Previous server version compatible (as of 2.3.1)! ## Key Features & Major Changes - Added native Forge support from Minecraft 1.17.1 to 26.3 for every Minecraft version with an official Forge release. - Expanded Minecraft version support for Fabric, Quilt, and NeoForge. - Fixed OpenRGB 1.0 compatibility so MineLights discovers devices. ## Installation / Upgrade Instructions - DELETE your old mine-lights-\*.jar file completely. - Download the jar from this release. - Place the new minelights-\*.jar into your mods folder. - Install Cloth Config, here: [https://modrinth.com/mod/cloth-config](https://modrinth.com/mod/cloth-config) - **OpenRGB (optional):** The latest OpenRGB version is recommended. After installing or updating OpenRGB, restart your computer before using MineLights. Start OpenRGB, open the **SDK Server** tab, and click **Start Server**. Keep OpenRGB running while Minecraft is open. MineLights connects to the local server at `127.0.0.1:6742` (the default SDK server address and port). - Run Minecraft. - Using anything which is not OpenRGB? 1. Start Minecraft. 2. Wait for MineLights.exe to finish downloading in the background. 3. If all goes well, you will see a dialog asking you if you want to grant `MineLights.exe` permission to access the internet. 4. After accepting, your supported devices will show red. ## Full Changelog & Technical Details - Updated the loader target matrix to Fabric 1.14.3-26.3, Quilt 1.14.4-26.3, Forge 1.17.1-26.3, and NeoForge 1.20.2-26.3. Forge targets skip Minecraft versions without an official Forge release. - Added a dedicated Forge module with per-version build configuration, a Forge client entry point, configuration screen integration, and player-data compatibility overrides. - Updated shared client, effect, and network mixin code for the mappings and APIs used by the Forge versions. - Added a dedicated 1.21.11 target for Fabric, Quilt, and NeoForge, plus NeoForge targets for 1.21.10 and 1.21.11. - Updated Cloth Config and Mod Menu dependency resolution for Fabric and Quilt 1.21.11 and 26.3 builds. Quilt 26.1 and newer now declares the required Quilt Loader version range. - Updated OpenRGB protocol handling to read controller IDs from protocol 6 responses, use those IDs for device requests and lighting updates, and negotiate protocol 5 for compatibility. - Set the Fabric lighting thread as a daemon so it does not keep the client running during shutdown.

# MineLights 2.3.8.3 This release adds native Forge support and expands version support across the loaders. It also fixes compatibility with OpenRGB 1.0. Previous server version compatible (as of 2.3.1)! ## Key Features & Major Changes - Added native Forge support from Minecraft 1.17.1 to 26.3 for every Minecraft version with an official Forge release. - Expanded Minecraft version support for Fabric, Quilt, and NeoForge. - Fixed OpenRGB 1.0 compatibility so MineLights discovers devices. ## Installation / Upgrade Instructions - DELETE your old mine-lights-\*.jar file completely. - Download the jar from this release. - Place the new minelights-\*.jar into your mods folder. - Install Cloth Config, here: [https://modrinth.com/mod/cloth-config](https://modrinth.com/mod/cloth-config) - **OpenRGB (optional):** The latest OpenRGB version is recommended. After installing or updating OpenRGB, restart your computer before using MineLights. Start OpenRGB, open the **SDK Server** tab, and click **Start Server**. Keep OpenRGB running while Minecraft is open. MineLights connects to the local server at `127.0.0.1:6742` (the default SDK server address and port). - Run Minecraft. - Using anything which is not OpenRGB? 1. Start Minecraft. 2. Wait for MineLights.exe to finish downloading in the background. 3. If all goes well, you will see a dialog asking you if you want to grant `MineLights.exe` permission to access the internet. 4. After accepting, your supported devices will show red. ## Full Changelog & Technical Details - Updated the loader target matrix to Fabric 1.14.3-26.3, Quilt 1.14.4-26.3, Forge 1.17.1-26.3, and NeoForge 1.20.2-26.3. Forge targets skip Minecraft versions without an official Forge release. - Added a dedicated Forge module with per-version build configuration, a Forge client entry point, configuration screen integration, and player-data compatibility overrides. - Updated shared client, effect, and network mixin code for the mappings and APIs used by the Forge versions. - Added a dedicated 1.21.11 target for Fabric, Quilt, and NeoForge, plus NeoForge targets for 1.21.10 and 1.21.11. - Updated Cloth Config and Mod Menu dependency resolution for Fabric and Quilt 1.21.11 and 26.3 builds. Quilt 26.1 and newer now declares the required Quilt Loader version range. - Updated OpenRGB protocol handling to read controller IDs from protocol 6 responses, use those IDs for device requests and lighting updates, and negotiate protocol 5 for compatibility. - Set the Fabric lighting thread as a daemon so it does not keep the client running during shutdown.

# MineLights 2.3.8.3 This release adds native Forge support and expands version support across the loaders. It also fixes compatibility with OpenRGB 1.0. Previous server version compatible (as of 2.3.1)! ## Key Features & Major Changes - Added native Forge support from Minecraft 1.17.1 to 26.3 for every Minecraft version with an official Forge release. - Expanded Minecraft version support for Fabric, Quilt, and NeoForge. - Fixed OpenRGB 1.0 compatibility so MineLights discovers devices. ## Installation / Upgrade Instructions - DELETE your old mine-lights-\*.jar file completely. - Download the jar from this release. - Place the new minelights-\*.jar into your mods folder. - Install Cloth Config, here: [https://modrinth.com/mod/cloth-config](https://modrinth.com/mod/cloth-config) - **OpenRGB (optional):** The latest OpenRGB version is recommended. After installing or updating OpenRGB, restart your computer before using MineLights. Start OpenRGB, open the **SDK Server** tab, and click **Start Server**. Keep OpenRGB running while Minecraft is open. MineLights connects to the local server at `127.0.0.1:6742` (the default SDK server address and port). - Run Minecraft. - Using anything which is not OpenRGB? 1. Start Minecraft. 2. Wait for MineLights.exe to finish downloading in the background. 3. If all goes well, you will see a dialog asking you if you want to grant `MineLights.exe` permission to access the internet. 4. After accepting, your supported devices will show red. ## Full Changelog & Technical Details - Updated the loader target matrix to Fabric 1.14.3-26.3, Quilt 1.14.4-26.3, Forge 1.17.1-26.3, and NeoForge 1.20.2-26.3. Forge targets skip Minecraft versions without an official Forge release. - Added a dedicated Forge module with per-version build configuration, a Forge client entry point, configuration screen integration, and player-data compatibility overrides. - Updated shared client, effect, and network mixin code for the mappings and APIs used by the Forge versions. - Added a dedicated 1.21.11 target for Fabric, Quilt, and NeoForge, plus NeoForge targets for 1.21.10 and 1.21.11. - Updated Cloth Config and Mod Menu dependency resolution for Fabric and Quilt 1.21.11 and 26.3 builds. Quilt 26.1 and newer now declares the required Quilt Loader version range. - Updated OpenRGB protocol handling to read controller IDs from protocol 6 responses, use those IDs for device requests and lighting updates, and negotiate protocol 5 for compatibility. - Set the Fabric lighting thread as a daemon so it does not keep the client running during shutdown.

# MineLights 2.3.8.3 This release adds native Forge support and expands version support across the loaders. It also fixes compatibility with OpenRGB 1.0. Previous server version compatible (as of 2.3.1)! ## Key Features & Major Changes - Added native Forge support from Minecraft 1.17.1 to 26.3 for every Minecraft version with an official Forge release. - Expanded Minecraft version support for Fabric, Quilt, and NeoForge. - Fixed OpenRGB 1.0 compatibility so MineLights discovers devices. ## Installation / Upgrade Instructions - DELETE your old mine-lights-\*.jar file completely. - Download the jar from this release. - Place the new minelights-\*.jar into your mods folder. - Install Cloth Config, here: [https://modrinth.com/mod/cloth-config](https://modrinth.com/mod/cloth-config) - **OpenRGB (optional):** The latest OpenRGB version is recommended. After installing or updating OpenRGB, restart your computer before using MineLights. Start OpenRGB, open the **SDK Server** tab, and click **Start Server**. Keep OpenRGB running while Minecraft is open. MineLights connects to the local server at `127.0.0.1:6742` (the default SDK server address and port). - Run Minecraft. - Using anything which is not OpenRGB? 1. Start Minecraft. 2. Wait for MineLights.exe to finish downloading in the background. 3. If all goes well, you will see a dialog asking you if you want to grant `MineLights.exe` permission to access the internet. 4. After accepting, your supported devices will show red. ## Full Changelog & Technical Details - Updated the loader target matrix to Fabric 1.14.3-26.3, Quilt 1.14.4-26.3, Forge 1.17.1-26.3, and NeoForge 1.20.2-26.3. Forge targets skip Minecraft versions without an official Forge release. - Added a dedicated Forge module with per-version build configuration, a Forge client entry point, configuration screen integration, and player-data compatibility overrides. - Updated shared client, effect, and network mixin code for the mappings and APIs used by the Forge versions. - Added a dedicated 1.21.11 target for Fabric, Quilt, and NeoForge, plus NeoForge targets for 1.21.10 and 1.21.11. - Updated Cloth Config and Mod Menu dependency resolution for Fabric and Quilt 1.21.11 and 26.3 builds. Quilt 26.1 and newer now declares the required Quilt Loader version range. - Updated OpenRGB protocol handling to read controller IDs from protocol 6 responses, use those IDs for device requests and lighting updates, and negotiate protocol 5 for compatibility. - Set the Fabric lighting thread as a daemon so it does not keep the client running during shutdown.

# MineLights 2.3.8.3 This release adds native Forge support and expands version support across the loaders. It also fixes compatibility with OpenRGB 1.0. Previous server version compatible (as of 2.3.1)! ## Key Features & Major Changes - Added native Forge support from Minecraft 1.17.1 to 26.3 for every Minecraft version with an official Forge release. - Expanded Minecraft version support for Fabric, Quilt, and NeoForge. - Fixed OpenRGB 1.0 compatibility so MineLights discovers devices. ## Installation / Upgrade Instructions - DELETE your old mine-lights-\*.jar file completely. - Download the jar from this release. - Place the new minelights-\*.jar into your mods folder. - Install Cloth Config, here: [https://modrinth.com/mod/cloth-config](https://modrinth.com/mod/cloth-config) - **OpenRGB (optional):** The latest OpenRGB version is recommended. After installing or updating OpenRGB, restart your computer before using MineLights. Start OpenRGB, open the **SDK Server** tab, and click **Start Server**. Keep OpenRGB running while Minecraft is open. MineLights connects to the local server at `127.0.0.1:6742` (the default SDK server address and port). - Run Minecraft. - Using anything which is not OpenRGB? 1. Start Minecraft. 2. Wait for MineLights.exe to finish downloading in the background. 3. If all goes well, you will see a dialog asking you if you want to grant `MineLights.exe` permission to access the internet. 4. After accepting, your supported devices will show red. ## Full Changelog & Technical Details - Updated the loader target matrix to Fabric 1.14.3-26.3, Quilt 1.14.4-26.3, Forge 1.17.1-26.3, and NeoForge 1.20.2-26.3. Forge targets skip Minecraft versions without an official Forge release. - Added a dedicated Forge module with per-version build configuration, a Forge client entry point, configuration screen integration, and player-data compatibility overrides. - Updated shared client, effect, and network mixin code for the mappings and APIs used by the Forge versions. - Added a dedicated 1.21.11 target for Fabric, Quilt, and NeoForge, plus NeoForge targets for 1.21.10 and 1.21.11. - Updated Cloth Config and Mod Menu dependency resolution for Fabric and Quilt 1.21.11 and 26.3 builds. Quilt 26.1 and newer now declares the required Quilt Loader version range. - Updated OpenRGB protocol handling to read controller IDs from protocol 6 responses, use those IDs for device requests and lighting updates, and negotiate protocol 5 for compatibility. - Set the Fabric lighting thread as a daemon so it does not keep the client running during shutdown.

# MineLights 2.3.8.3 This release adds native Forge support and expands version support across the loaders. It also fixes compatibility with OpenRGB 1.0. Previous server version compatible (as of 2.3.1)! ## Key Features & Major Changes - Added native Forge support from Minecraft 1.17.1 to 26.3 for every Minecraft version with an official Forge release. - Expanded Minecraft version support for Fabric, Quilt, and NeoForge. - Fixed OpenRGB 1.0 compatibility so MineLights discovers devices. ## Installation / Upgrade Instructions - DELETE your old mine-lights-\*.jar file completely. - Download the jar from this release. - Place the new minelights-\*.jar into your mods folder. - Install Cloth Config, here: [https://modrinth.com/mod/cloth-config](https://modrinth.com/mod/cloth-config) - **OpenRGB (optional):** The latest OpenRGB version is recommended. After installing or updating OpenRGB, restart your computer before using MineLights. Start OpenRGB, open the **SDK Server** tab, and click **Start Server**. Keep OpenRGB running while Minecraft is open. MineLights connects to the local server at `127.0.0.1:6742` (the default SDK server address and port). - Run Minecraft. - Using anything which is not OpenRGB? 1. Start Minecraft. 2. Wait for MineLights.exe to finish downloading in the background. 3. If all goes well, you will see a dialog asking you if you want to grant `MineLights.exe` permission to access the internet. 4. After accepting, your supported devices will show red. ## Full Changelog & Technical Details - Updated the loader target matrix to Fabric 1.14.3-26.3, Quilt 1.14.4-26.3, Forge 1.17.1-26.3, and NeoForge 1.20.2-26.3. Forge targets skip Minecraft versions without an official Forge release. - Added a dedicated Forge module with per-version build configuration, a Forge client entry point, configuration screen integration, and player-data compatibility overrides. - Updated shared client, effect, and network mixin code for the mappings and APIs used by the Forge versions. - Added a dedicated 1.21.11 target for Fabric, Quilt, and NeoForge, plus NeoForge targets for 1.21.10 and 1.21.11. - Updated Cloth Config and Mod Menu dependency resolution for Fabric and Quilt 1.21.11 and 26.3 builds. Quilt 26.1 and newer now declares the required Quilt Loader version range. - Updated OpenRGB protocol handling to read controller IDs from protocol 6 responses, use those IDs for device requests and lighting updates, and negotiate protocol 5 for compatibility. - Set the Fabric lighting thread as a daemon so it does not keep the client running during shutdown.

# MineLights 2.3.8.3 This release adds native Forge support and expands version support across the loaders. It also fixes compatibility with OpenRGB 1.0. Previous server version compatible (as of 2.3.1)! ## Key Features & Major Changes - Added native Forge support from Minecraft 1.17.1 to 26.3 for every Minecraft version with an official Forge release. - Expanded Minecraft version support for Fabric, Quilt, and NeoForge. - Fixed OpenRGB 1.0 compatibility so MineLights discovers devices. ## Installation / Upgrade Instructions - DELETE your old mine-lights-\*.jar file completely. - Download the jar from this release. - Place the new minelights-\*.jar into your mods folder. - Install Cloth Config, here: [https://modrinth.com/mod/cloth-config](https://modrinth.com/mod/cloth-config) - **OpenRGB (optional):** The latest OpenRGB version is recommended. After installing or updating OpenRGB, restart your computer before using MineLights. Start OpenRGB, open the **SDK Server** tab, and click **Start Server**. Keep OpenRGB running while Minecraft is open. MineLights connects to the local server at `127.0.0.1:6742` (the default SDK server address and port). - Run Minecraft. - Using anything which is not OpenRGB? 1. Start Minecraft. 2. Wait for MineLights.exe to finish downloading in the background. 3. If all goes well, you will see a dialog asking you if you want to grant `MineLights.exe` permission to access the internet. 4. After accepting, your supported devices will show red. ## Full Changelog & Technical Details - Updated the loader target matrix to Fabric 1.14.3-26.3, Quilt 1.14.4-26.3, Forge 1.17.1-26.3, and NeoForge 1.20.2-26.3. Forge targets skip Minecraft versions without an official Forge release. - Added a dedicated Forge module with per-version build configuration, a Forge client entry point, configuration screen integration, and player-data compatibility overrides. - Updated shared client, effect, and network mixin code for the mappings and APIs used by the Forge versions. - Added a dedicated 1.21.11 target for Fabric, Quilt, and NeoForge, plus NeoForge targets for 1.21.10 and 1.21.11. - Updated Cloth Config and Mod Menu dependency resolution for Fabric and Quilt 1.21.11 and 26.3 builds. Quilt 26.1 and newer now declares the required Quilt Loader version range. - Updated OpenRGB protocol handling to read controller IDs from protocol 6 responses, use those IDs for device requests and lighting updates, and negotiate protocol 5 for compatibility. - Set the Fabric lighting thread as a daemon so it does not keep the client running during shutdown.

# MineLights 2.3.8.3 This release adds native Forge support and expands version support across the loaders. It also fixes compatibility with OpenRGB 1.0. Previous server version compatible (as of 2.3.1)! ## Key Features & Major Changes - Added native Forge support from Minecraft 1.17.1 to 26.3 for every Minecraft version with an official Forge release. - Expanded Minecraft version support for Fabric, Quilt, and NeoForge. - Fixed OpenRGB 1.0 compatibility so MineLights discovers devices. ## Installation / Upgrade Instructions - DELETE your old mine-lights-\*.jar file completely. - Download the jar from this release. - Place the new minelights-\*.jar into your mods folder. - Install Cloth Config, here: [https://modrinth.com/mod/cloth-config](https://modrinth.com/mod/cloth-config) - **OpenRGB (optional):** The latest OpenRGB version is recommended. After installing or updating OpenRGB, restart your computer before using MineLights. Start OpenRGB, open the **SDK Server** tab, and click **Start Server**. Keep OpenRGB running while Minecraft is open. MineLights connects to the local server at `127.0.0.1:6742` (the default SDK server address and port). - Run Minecraft. - Using anything which is not OpenRGB? 1. Start Minecraft. 2. Wait for MineLights.exe to finish downloading in the background. 3. If all goes well, you will see a dialog asking you if you want to grant `MineLights.exe` permission to access the internet. 4. After accepting, your supported devices will show red. ## Full Changelog & Technical Details - Updated the loader target matrix to Fabric 1.14.3-26.3, Quilt 1.14.4-26.3, Forge 1.17.1-26.3, and NeoForge 1.20.2-26.3. Forge targets skip Minecraft versions without an official Forge release. - Added a dedicated Forge module with per-version build configuration, a Forge client entry point, configuration screen integration, and player-data compatibility overrides. - Updated shared client, effect, and network mixin code for the mappings and APIs used by the Forge versions. - Added a dedicated 1.21.11 target for Fabric, Quilt, and NeoForge, plus NeoForge targets for 1.21.10 and 1.21.11. - Updated Cloth Config and Mod Menu dependency resolution for Fabric and Quilt 1.21.11 and 26.3 builds. Quilt 26.1 and newer now declares the required Quilt Loader version range. - Updated OpenRGB protocol handling to read controller IDs from protocol 6 responses, use those IDs for device requests and lighting updates, and negotiate protocol 5 for compatibility. - Set the Fabric lighting thread as a daemon so it does not keep the client running during shutdown.

# MineLights 2.3.8.3 This release adds native Forge support and expands version support across the loaders. It also fixes compatibility with OpenRGB 1.0. Previous server version compatible (as of 2.3.1)! ## Key Features & Major Changes - Added native Forge support from Minecraft 1.17.1 to 26.3 for every Minecraft version with an official Forge release. - Expanded Minecraft version support for Fabric, Quilt, and NeoForge. - Fixed OpenRGB 1.0 compatibility so MineLights discovers devices. ## Installation / Upgrade Instructions - DELETE your old mine-lights-\*.jar file completely. - Download the jar from this release. - Place the new minelights-\*.jar into your mods folder. - Install Cloth Config, here: [https://modrinth.com/mod/cloth-config](https://modrinth.com/mod/cloth-config) - **OpenRGB (optional):** The latest OpenRGB version is recommended. After installing or updating OpenRGB, restart your computer before using MineLights. Start OpenRGB, open the **SDK Server** tab, and click **Start Server**. Keep OpenRGB running while Minecraft is open. MineLights connects to the local server at `127.0.0.1:6742` (the default SDK server address and port). - Run Minecraft. - Using anything which is not OpenRGB? 1. Start Minecraft. 2. Wait for MineLights.exe to finish downloading in the background. 3. If all goes well, you will see a dialog asking you if you want to grant `MineLights.exe` permission to access the internet. 4. After accepting, your supported devices will show red. ## Full Changelog & Technical Details - Updated the loader target matrix to Fabric 1.14.3-26.3, Quilt 1.14.4-26.3, Forge 1.17.1-26.3, and NeoForge 1.20.2-26.3. Forge targets skip Minecraft versions without an official Forge release. - Added a dedicated Forge module with per-version build configuration, a Forge client entry point, configuration screen integration, and player-data compatibility overrides. - Updated shared client, effect, and network mixin code for the mappings and APIs used by the Forge versions. - Added a dedicated 1.21.11 target for Fabric, Quilt, and NeoForge, plus NeoForge targets for 1.21.10 and 1.21.11. - Updated Cloth Config and Mod Menu dependency resolution for Fabric and Quilt 1.21.11 and 26.3 builds. Quilt 26.1 and newer now declares the required Quilt Loader version range. - Updated OpenRGB protocol handling to read controller IDs from protocol 6 responses, use those IDs for device requests and lighting updates, and negotiate protocol 5 for compatibility. - Set the Fabric lighting thread as a daemon so it does not keep the client running during shutdown.

# MineLights 2.3.8.3 This release adds native Forge support and expands version support across the loaders. It also fixes compatibility with OpenRGB 1.0. Previous server version compatible (as of 2.3.1)! ## Key Features & Major Changes - Added native Forge support from Minecraft 1.17.1 to 26.3 for every Minecraft version with an official Forge release. - Expanded Minecraft version support for Fabric, Quilt, and NeoForge. - Fixed OpenRGB 1.0 compatibility so MineLights discovers devices. ## Installation / Upgrade Instructions - DELETE your old mine-lights-\*.jar file completely. - Download the jar from this release. - Place the new minelights-\*.jar into your mods folder. - Install Cloth Config, here: [https://modrinth.com/mod/cloth-config](https://modrinth.com/mod/cloth-config) - **OpenRGB (optional):** The latest OpenRGB version is recommended. After installing or updating OpenRGB, restart your computer before using MineLights. Start OpenRGB, open the **SDK Server** tab, and click **Start Server**. Keep OpenRGB running while Minecraft is open. MineLights connects to the local server at `127.0.0.1:6742` (the default SDK server address and port). - Run Minecraft. - Using anything which is not OpenRGB? 1. Start Minecraft. 2. Wait for MineLights.exe to finish downloading in the background. 3. If all goes well, you will see a dialog asking you if you want to grant `MineLights.exe` permission to access the internet. 4. After accepting, your supported devices will show red. ## Full Changelog & Technical Details - Updated the loader target matrix to Fabric 1.14.3-26.3, Quilt 1.14.4-26.3, Forge 1.17.1-26.3, and NeoForge 1.20.2-26.3. Forge targets skip Minecraft versions without an official Forge release. - Added a dedicated Forge module with per-version build configuration, a Forge client entry point, configuration screen integration, and player-data compatibility overrides. - Updated shared client, effect, and network mixin code for the mappings and APIs used by the Forge versions. - Added a dedicated 1.21.11 target for Fabric, Quilt, and NeoForge, plus NeoForge targets for 1.21.10 and 1.21.11. - Updated Cloth Config and Mod Menu dependency resolution for Fabric and Quilt 1.21.11 and 26.3 builds. Quilt 26.1 and newer now declares the required Quilt Loader version range. - Updated OpenRGB protocol handling to read controller IDs from protocol 6 responses, use those IDs for device requests and lighting updates, and negotiate protocol 5 for compatibility. - Set the Fabric lighting thread as a daemon so it does not keep the client running during shutdown.

# MineLights 2.3.8.3 This release adds native Forge support and expands version support across the loaders. It also fixes compatibility with OpenRGB 1.0. Previous server version compatible (as of 2.3.1)! ## Key Features & Major Changes - Added native Forge support from Minecraft 1.17.1 to 26.3 for every Minecraft version with an official Forge release. - Expanded Minecraft version support for Fabric, Quilt, and NeoForge. - Fixed OpenRGB 1.0 compatibility so MineLights discovers devices. ## Installation / Upgrade Instructions - DELETE your old mine-lights-\*.jar file completely. - Download the jar from this release. - Place the new minelights-\*.jar into your mods folder. - Install Cloth Config, here: [https://modrinth.com/mod/cloth-config](https://modrinth.com/mod/cloth-config) - **OpenRGB (optional):** The latest OpenRGB version is recommended. After installing or updating OpenRGB, restart your computer before using MineLights. Start OpenRGB, open the **SDK Server** tab, and click **Start Server**. Keep OpenRGB running while Minecraft is open. MineLights connects to the local server at `127.0.0.1:6742` (the default SDK server address and port). - Run Minecraft. - Using anything which is not OpenRGB? 1. Start Minecraft. 2. Wait for MineLights.exe to finish downloading in the background. 3. If all goes well, you will see a dialog asking you if you want to grant `MineLights.exe` permission to access the internet. 4. After accepting, your supported devices will show red. ## Full Changelog & Technical Details - Updated the loader target matrix to Fabric 1.14.3-26.3, Quilt 1.14.4-26.3, Forge 1.17.1-26.3, and NeoForge 1.20.2-26.3. Forge targets skip Minecraft versions without an official Forge release. - Added a dedicated Forge module with per-version build configuration, a Forge client entry point, configuration screen integration, and player-data compatibility overrides. - Updated shared client, effect, and network mixin code for the mappings and APIs used by the Forge versions. - Added a dedicated 1.21.11 target for Fabric, Quilt, and NeoForge, plus NeoForge targets for 1.21.10 and 1.21.11. - Updated Cloth Config and Mod Menu dependency resolution for Fabric and Quilt 1.21.11 and 26.3 builds. Quilt 26.1 and newer now declares the required Quilt Loader version range. - Updated OpenRGB protocol handling to read controller IDs from protocol 6 responses, use those IDs for device requests and lighting updates, and negotiate protocol 5 for compatibility. - Set the Fabric lighting thread as a daemon so it does not keep the client running during shutdown.

# MineLights 2.3.8.3 This release adds native Forge support and expands version support across the loaders. It also fixes compatibility with OpenRGB 1.0. Previous server version compatible (as of 2.3.1)! ## Key Features & Major Changes - Added native Forge support from Minecraft 1.17.1 to 26.3 for every Minecraft version with an official Forge release. - Expanded Minecraft version support for Fabric, Quilt, and NeoForge. - Fixed OpenRGB 1.0 compatibility so MineLights discovers devices. ## Installation / Upgrade Instructions - DELETE your old mine-lights-\*.jar file completely. - Download the jar from this release. - Place the new minelights-\*.jar into your mods folder. - Install Cloth Config, here: [https://modrinth.com/mod/cloth-config](https://modrinth.com/mod/cloth-config) - **OpenRGB (optional):** The latest OpenRGB version is recommended. After installing or updating OpenRGB, restart your computer before using MineLights. Start OpenRGB, open the **SDK Server** tab, and click **Start Server**. Keep OpenRGB running while Minecraft is open. MineLights connects to the local server at `127.0.0.1:6742` (the default SDK server address and port). - Run Minecraft. - Using anything which is not OpenRGB? 1. Start Minecraft. 2. Wait for MineLights.exe to finish downloading in the background. 3. If all goes well, you will see a dialog asking you if you want to grant `MineLights.exe` permission to access the internet. 4. After accepting, your supported devices will show red. ## Full Changelog & Technical Details - Updated the loader target matrix to Fabric 1.14.3-26.3, Quilt 1.14.4-26.3, Forge 1.17.1-26.3, and NeoForge 1.20.2-26.3. Forge targets skip Minecraft versions without an official Forge release. - Added a dedicated Forge module with per-version build configuration, a Forge client entry point, configuration screen integration, and player-data compatibility overrides. - Updated shared client, effect, and network mixin code for the mappings and APIs used by the Forge versions. - Added a dedicated 1.21.11 target for Fabric, Quilt, and NeoForge, plus NeoForge targets for 1.21.10 and 1.21.11. - Updated Cloth Config and Mod Menu dependency resolution for Fabric and Quilt 1.21.11 and 26.3 builds. Quilt 26.1 and newer now declares the required Quilt Loader version range. - Updated OpenRGB protocol handling to read controller IDs from protocol 6 responses, use those IDs for device requests and lighting updates, and negotiate protocol 5 for compatibility. - Set the Fabric lighting thread as a daemon so it does not keep the client running during shutdown.

# MineLights 2.3.8.3 This release adds native Forge support and expands version support across the loaders. It also fixes compatibility with OpenRGB 1.0. Previous server version compatible (as of 2.3.1)! ## Key Features & Major Changes - Added native Forge support from Minecraft 1.17.1 to 26.3 for every Minecraft version with an official Forge release. - Expanded Minecraft version support for Fabric, Quilt, and NeoForge. - Fixed OpenRGB 1.0 compatibility so MineLights discovers devices. ## Installation / Upgrade Instructions - DELETE your old mine-lights-\*.jar file completely. - Download the jar from this release. - Place the new minelights-\*.jar into your mods folder. - Install Cloth Config, here: [https://modrinth.com/mod/cloth-config](https://modrinth.com/mod/cloth-config) - **OpenRGB (optional):** The latest OpenRGB version is recommended. After installing or updating OpenRGB, restart your computer before using MineLights. Start OpenRGB, open the **SDK Server** tab, and click **Start Server**. Keep OpenRGB running while Minecraft is open. MineLights connects to the local server at `127.0.0.1:6742` (the default SDK server address and port). - Run Minecraft. - Using anything which is not OpenRGB? 1. Start Minecraft. 2. Wait for MineLights.exe to finish downloading in the background. 3. If all goes well, you will see a dialog asking you if you want to grant `MineLights.exe` permission to access the internet. 4. After accepting, your supported devices will show red. ## Full Changelog & Technical Details - Updated the loader target matrix to Fabric 1.14.3-26.3, Quilt 1.14.4-26.3, Forge 1.17.1-26.3, and NeoForge 1.20.2-26.3. Forge targets skip Minecraft versions without an official Forge release. - Added a dedicated Forge module with per-version build configuration, a Forge client entry point, configuration screen integration, and player-data compatibility overrides. - Updated shared client, effect, and network mixin code for the mappings and APIs used by the Forge versions. - Added a dedicated 1.21.11 target for Fabric, Quilt, and NeoForge, plus NeoForge targets for 1.21.10 and 1.21.11. - Updated Cloth Config and Mod Menu dependency resolution for Fabric and Quilt 1.21.11 and 26.3 builds. Quilt 26.1 and newer now declares the required Quilt Loader version range. - Updated OpenRGB protocol handling to read controller IDs from protocol 6 responses, use those IDs for device requests and lighting updates, and negotiate protocol 5 for compatibility. - Set the Fabric lighting thread as a daemon so it does not keep the client running during shutdown.

# MineLights 2.3.8.3 This release adds native Forge support and expands version support across the loaders. It also fixes compatibility with OpenRGB 1.0. Previous server version compatible (as of 2.3.1)! ## Key Features & Major Changes - Added native Forge support from Minecraft 1.17.1 to 26.3 for every Minecraft version with an official Forge release. - Expanded Minecraft version support for Fabric, Quilt, and NeoForge. - Fixed OpenRGB 1.0 compatibility so MineLights discovers devices. ## Installation / Upgrade Instructions - DELETE your old mine-lights-\*.jar file completely. - Download the jar from this release. - Place the new minelights-\*.jar into your mods folder. - Install Cloth Config, here: [https://modrinth.com/mod/cloth-config](https://modrinth.com/mod/cloth-config) - **OpenRGB (optional):** The latest OpenRGB version is recommended. After installing or updating OpenRGB, restart your computer before using MineLights. Start OpenRGB, open the **SDK Server** tab, and click **Start Server**. Keep OpenRGB running while Minecraft is open. MineLights connects to the local server at `127.0.0.1:6742` (the default SDK server address and port). - Run Minecraft. - Using anything which is not OpenRGB? 1. Start Minecraft. 2. Wait for MineLights.exe to finish downloading in the background. 3. If all goes well, you will see a dialog asking you if you want to grant `MineLights.exe` permission to access the internet. 4. After accepting, your supported devices will show red. ## Full Changelog & Technical Details - Updated the loader target matrix to Fabric 1.14.3-26.3, Quilt 1.14.4-26.3, Forge 1.17.1-26.3, and NeoForge 1.20.2-26.3. Forge targets skip Minecraft versions without an official Forge release. - Added a dedicated Forge module with per-version build configuration, a Forge client entry point, configuration screen integration, and player-data compatibility overrides. - Updated shared client, effect, and network mixin code for the mappings and APIs used by the Forge versions. - Added a dedicated 1.21.11 target for Fabric, Quilt, and NeoForge, plus NeoForge targets for 1.21.10 and 1.21.11. - Updated Cloth Config and Mod Menu dependency resolution for Fabric and Quilt 1.21.11 and 26.3 builds. Quilt 26.1 and newer now declares the required Quilt Loader version range. - Updated OpenRGB protocol handling to read controller IDs from protocol 6 responses, use those IDs for device requests and lighting updates, and negotiate protocol 5 for compatibility. - Set the Fabric lighting thread as a daemon so it does not keep the client running during shutdown.

# MineLights 2.3.8.3 This release adds native Forge support and expands version support across the loaders. It also fixes compatibility with OpenRGB 1.0. Previous server version compatible (as of 2.3.1)! ## Key Features & Major Changes - Added native Forge support from Minecraft 1.17.1 to 26.3 for every Minecraft version with an official Forge release. - Expanded Minecraft version support for Fabric, Quilt, and NeoForge. - Fixed OpenRGB 1.0 compatibility so MineLights discovers devices. ## Installation / Upgrade Instructions - DELETE your old mine-lights-\*.jar file completely. - Download the jar from this release. - Place the new minelights-\*.jar into your mods folder. - Install Cloth Config, here: [https://modrinth.com/mod/cloth-config](https://modrinth.com/mod/cloth-config) - **OpenRGB (optional):** The latest OpenRGB version is recommended. After installing or updating OpenRGB, restart your computer before using MineLights. Start OpenRGB, open the **SDK Server** tab, and click **Start Server**. Keep OpenRGB running while Minecraft is open. MineLights connects to the local server at `127.0.0.1:6742` (the default SDK server address and port). - Run Minecraft. - Using anything which is not OpenRGB? 1. Start Minecraft. 2. Wait for MineLights.exe to finish downloading in the background. 3. If all goes well, you will see a dialog asking you if you want to grant `MineLights.exe` permission to access the internet. 4. After accepting, your supported devices will show red. ## Full Changelog & Technical Details - Updated the loader target matrix to Fabric 1.14.3-26.3, Quilt 1.14.4-26.3, Forge 1.17.1-26.3, and NeoForge 1.20.2-26.3. Forge targets skip Minecraft versions without an official Forge release. - Added a dedicated Forge module with per-version build configuration, a Forge client entry point, configuration screen integration, and player-data compatibility overrides. - Updated shared client, effect, and network mixin code for the mappings and APIs used by the Forge versions. - Added a dedicated 1.21.11 target for Fabric, Quilt, and NeoForge, plus NeoForge targets for 1.21.10 and 1.21.11. - Updated Cloth Config and Mod Menu dependency resolution for Fabric and Quilt 1.21.11 and 26.3 builds. Quilt 26.1 and newer now declares the required Quilt Loader version range. - Updated OpenRGB protocol handling to read controller IDs from protocol 6 responses, use those IDs for device requests and lighting updates, and negotiate protocol 5 for compatibility. - Set the Fabric lighting thread as a daemon so it does not keep the client running during shutdown.

# MineLights 2.3.8.3 This release adds native Forge support and expands version support across the loaders. It also fixes compatibility with OpenRGB 1.0. Previous server version compatible (as of 2.3.1)! ## Key Features & Major Changes - Added native Forge support from Minecraft 1.17.1 to 26.3 for every Minecraft version with an official Forge release. - Expanded Minecraft version support for Fabric, Quilt, and NeoForge. - Fixed OpenRGB 1.0 compatibility so MineLights discovers devices. ## Installation / Upgrade Instructions - DELETE your old mine-lights-\*.jar file completely. - Download the jar from this release. - Place the new minelights-\*.jar into your mods folder. - Install Cloth Config, here: [https://modrinth.com/mod/cloth-config](https://modrinth.com/mod/cloth-config) - **OpenRGB (optional):** The latest OpenRGB version is recommended. After installing or updating OpenRGB, restart your computer before using MineLights. Start OpenRGB, open the **SDK Server** tab, and click **Start Server**. Keep OpenRGB running while Minecraft is open. MineLights connects to the local server at `127.0.0.1:6742` (the default SDK server address and port). - Run Minecraft. - Using anything which is not OpenRGB? 1. Start Minecraft. 2. Wait for MineLights.exe to finish downloading in the background. 3. If all goes well, you will see a dialog asking you if you want to grant `MineLights.exe` permission to access the internet. 4. After accepting, your supported devices will show red. ## Full Changelog & Technical Details - Updated the loader target matrix to Fabric 1.14.3-26.3, Quilt 1.14.4-26.3, Forge 1.17.1-26.3, and NeoForge 1.20.2-26.3. Forge targets skip Minecraft versions without an official Forge release. - Added a dedicated Forge module with per-version build configuration, a Forge client entry point, configuration screen integration, and player-data compatibility overrides. - Updated shared client, effect, and network mixin code for the mappings and APIs used by the Forge versions. - Added a dedicated 1.21.11 target for Fabric, Quilt, and NeoForge, plus NeoForge targets for 1.21.10 and 1.21.11. - Updated Cloth Config and Mod Menu dependency resolution for Fabric and Quilt 1.21.11 and 26.3 builds. Quilt 26.1 and newer now declares the required Quilt Loader version range. - Updated OpenRGB protocol handling to read controller IDs from protocol 6 responses, use those IDs for device requests and lighting updates, and negotiate protocol 5 for compatibility. - Set the Fabric lighting thread as a daemon so it does not keep the client running during shutdown.

# MineLights 2.3.8.3 This release adds native Forge support and expands version support across the loaders. It also fixes compatibility with OpenRGB 1.0. Previous server version compatible (as of 2.3.1)! ## Key Features & Major Changes - Added native Forge support from Minecraft 1.17.1 to 26.3 for every Minecraft version with an official Forge release. - Expanded Minecraft version support for Fabric, Quilt, and NeoForge. - Fixed OpenRGB 1.0 compatibility so MineLights discovers devices. ## Installation / Upgrade Instructions - DELETE your old mine-lights-\*.jar file completely. - Download the jar from this release. - Place the new minelights-\*.jar into your mods folder. - Install Cloth Config, here: [https://modrinth.com/mod/cloth-config](https://modrinth.com/mod/cloth-config) - **OpenRGB (optional):** The latest OpenRGB version is recommended. After installing or updating OpenRGB, restart your computer before using MineLights. Start OpenRGB, open the **SDK Server** tab, and click **Start Server**. Keep OpenRGB running while Minecraft is open. MineLights connects to the local server at `127.0.0.1:6742` (the default SDK server address and port). - Run Minecraft. - Using anything which is not OpenRGB? 1. Start Minecraft. 2. Wait for MineLights.exe to finish downloading in the background. 3. If all goes well, you will see a dialog asking you if you want to grant `MineLights.exe` permission to access the internet. 4. After accepting, your supported devices will show red. ## Full Changelog & Technical Details - Updated the loader target matrix to Fabric 1.14.3-26.3, Quilt 1.14.4-26.3, Forge 1.17.1-26.3, and NeoForge 1.20.2-26.3. Forge targets skip Minecraft versions without an official Forge release. - Added a dedicated Forge module with per-version build configuration, a Forge client entry point, configuration screen integration, and player-data compatibility overrides. - Updated shared client, effect, and network mixin code for the mappings and APIs used by the Forge versions. - Added a dedicated 1.21.11 target for Fabric, Quilt, and NeoForge, plus NeoForge targets for 1.21.10 and 1.21.11. - Updated Cloth Config and Mod Menu dependency resolution for Fabric and Quilt 1.21.11 and 26.3 builds. Quilt 26.1 and newer now declares the required Quilt Loader version range. - Updated OpenRGB protocol handling to read controller IDs from protocol 6 responses, use those IDs for device requests and lighting updates, and negotiate protocol 5 for compatibility. - Set the Fabric lighting thread as a daemon so it does not keep the client running during shutdown.

# MineLights 2.3.8.3 This release adds native Forge support and expands version support across the loaders. It also fixes compatibility with OpenRGB 1.0. Previous server version compatible (as of 2.3.1)! ## Key Features & Major Changes - Added native Forge support from Minecraft 1.17.1 to 26.3 for every Minecraft version with an official Forge release. - Expanded Minecraft version support for Fabric, Quilt, and NeoForge. - Fixed OpenRGB 1.0 compatibility so MineLights discovers devices. ## Installation / Upgrade Instructions - DELETE your old mine-lights-\*.jar file completely. - Download the jar from this release. - Place the new minelights-\*.jar into your mods folder. - Install Cloth Config, here: [https://modrinth.com/mod/cloth-config](https://modrinth.com/mod/cloth-config) - **OpenRGB (optional):** The latest OpenRGB version is recommended. After installing or updating OpenRGB, restart your computer before using MineLights. Start OpenRGB, open the **SDK Server** tab, and click **Start Server**. Keep OpenRGB running while Minecraft is open. MineLights connects to the local server at `127.0.0.1:6742` (the default SDK server address and port). - Run Minecraft. - Using anything which is not OpenRGB? 1. Start Minecraft. 2. Wait for MineLights.exe to finish downloading in the background. 3. If all goes well, you will see a dialog asking you if you want to grant `MineLights.exe` permission to access the internet. 4. After accepting, your supported devices will show red. ## Full Changelog & Technical Details - Updated the loader target matrix to Fabric 1.14.3-26.3, Quilt 1.14.4-26.3, Forge 1.17.1-26.3, and NeoForge 1.20.2-26.3. Forge targets skip Minecraft versions without an official Forge release. - Added a dedicated Forge module with per-version build configuration, a Forge client entry point, configuration screen integration, and player-data compatibility overrides. - Updated shared client, effect, and network mixin code for the mappings and APIs used by the Forge versions. - Added a dedicated 1.21.11 target for Fabric, Quilt, and NeoForge, plus NeoForge targets for 1.21.10 and 1.21.11. - Updated Cloth Config and Mod Menu dependency resolution for Fabric and Quilt 1.21.11 and 26.3 builds. Quilt 26.1 and newer now declares the required Quilt Loader version range. - Updated OpenRGB protocol handling to read controller IDs from protocol 6 responses, use those IDs for device requests and lighting updates, and negotiate protocol 5 for compatibility. - Set the Fabric lighting thread as a daemon so it does not keep the client running during shutdown.

# MineLights 2.3.8.3 This release adds native Forge support and expands version support across the loaders. It also fixes compatibility with OpenRGB 1.0. Previous server version compatible (as of 2.3.1)! ## Key Features & Major Changes - Added native Forge support from Minecraft 1.17.1 to 26.3 for every Minecraft version with an official Forge release. - Expanded Minecraft version support for Fabric, Quilt, and NeoForge. - Fixed OpenRGB 1.0 compatibility so MineLights discovers devices. ## Installation / Upgrade Instructions - DELETE your old mine-lights-\*.jar file completely. - Download the jar from this release. - Place the new minelights-\*.jar into your mods folder. - Install Cloth Config, here: [https://modrinth.com/mod/cloth-config](https://modrinth.com/mod/cloth-config) - **OpenRGB (optional):** The latest OpenRGB version is recommended. After installing or updating OpenRGB, restart your computer before using MineLights. Start OpenRGB, open the **SDK Server** tab, and click **Start Server**. Keep OpenRGB running while Minecraft is open. MineLights connects to the local server at `127.0.0.1:6742` (the default SDK server address and port). - Run Minecraft. - Using anything which is not OpenRGB? 1. Start Minecraft. 2. Wait for MineLights.exe to finish downloading in the background. 3. If all goes well, you will see a dialog asking you if you want to grant `MineLights.exe` permission to access the internet. 4. After accepting, your supported devices will show red. ## Full Changelog & Technical Details - Updated the loader target matrix to Fabric 1.14.3-26.3, Quilt 1.14.4-26.3, Forge 1.17.1-26.3, and NeoForge 1.20.2-26.3. Forge targets skip Minecraft versions without an official Forge release. - Added a dedicated Forge module with per-version build configuration, a Forge client entry point, configuration screen integration, and player-data compatibility overrides. - Updated shared client, effect, and network mixin code for the mappings and APIs used by the Forge versions. - Added a dedicated 1.21.11 target for Fabric, Quilt, and NeoForge, plus NeoForge targets for 1.21.10 and 1.21.11. - Updated Cloth Config and Mod Menu dependency resolution for Fabric and Quilt 1.21.11 and 26.3 builds. Quilt 26.1 and newer now declares the required Quilt Loader version range. - Updated OpenRGB protocol handling to read controller IDs from protocol 6 responses, use those IDs for device requests and lighting updates, and negotiate protocol 5 for compatibility. - Set the Fabric lighting thread as a daemon so it does not keep the client running during shutdown.

# MineLights 2.3.8.3 This release adds native Forge support and expands version support across the loaders. It also fixes compatibility with OpenRGB 1.0. Previous server version compatible (as of 2.3.1)! ## Key Features & Major Changes - Added native Forge support from Minecraft 1.17.1 to 26.3 for every Minecraft version with an official Forge release. - Expanded Minecraft version support for Fabric, Quilt, and NeoForge. - Fixed OpenRGB 1.0 compatibility so MineLights discovers devices. ## Installation / Upgrade Instructions - DELETE your old mine-lights-\*.jar file completely. - Download the jar from this release. - Place the new minelights-\*.jar into your mods folder. - Install Cloth Config, here: [https://modrinth.com/mod/cloth-config](https://modrinth.com/mod/cloth-config) - **OpenRGB (optional):** The latest OpenRGB version is recommended. After installing or updating OpenRGB, restart your computer before using MineLights. Start OpenRGB, open the **SDK Server** tab, and click **Start Server**. Keep OpenRGB running while Minecraft is open. MineLights connects to the local server at `127.0.0.1:6742` (the default SDK server address and port). - Run Minecraft. - Using anything which is not OpenRGB? 1. Start Minecraft. 2. Wait for MineLights.exe to finish downloading in the background. 3. If all goes well, you will see a dialog asking you if you want to grant `MineLights.exe` permission to access the internet. 4. After accepting, your supported devices will show red. ## Full Changelog & Technical Details - Updated the loader target matrix to Fabric 1.14.3-26.3, Quilt 1.14.4-26.3, Forge 1.17.1-26.3, and NeoForge 1.20.2-26.3. Forge targets skip Minecraft versions without an official Forge release. - Added a dedicated Forge module with per-version build configuration, a Forge client entry point, configuration screen integration, and player-data compatibility overrides. - Updated shared client, effect, and network mixin code for the mappings and APIs used by the Forge versions. - Added a dedicated 1.21.11 target for Fabric, Quilt, and NeoForge, plus NeoForge targets for 1.21.10 and 1.21.11. - Updated Cloth Config and Mod Menu dependency resolution for Fabric and Quilt 1.21.11 and 26.3 builds. Quilt 26.1 and newer now declares the required Quilt Loader version range. - Updated OpenRGB protocol handling to read controller IDs from protocol 6 responses, use those IDs for device requests and lighting updates, and negotiate protocol 5 for compatibility. - Set the Fabric lighting thread as a daemon so it does not keep the client running during shutdown.

# MineLights 2.3.8.3 This release adds native Forge support and expands version support across the loaders. It also fixes compatibility with OpenRGB 1.0. Previous server version compatible (as of 2.3.1)! ## Key Features & Major Changes - Added native Forge support from Minecraft 1.17.1 to 26.3 for every Minecraft version with an official Forge release. - Expanded Minecraft version support for Fabric, Quilt, and NeoForge. - Fixed OpenRGB 1.0 compatibility so MineLights discovers devices. ## Installation / Upgrade Instructions - DELETE your old mine-lights-\*.jar file completely. - Download the jar from this release. - Place the new minelights-\*.jar into your mods folder. - Install Cloth Config, here: [https://modrinth.com/mod/cloth-config](https://modrinth.com/mod/cloth-config) - **OpenRGB (optional):** The latest OpenRGB version is recommended. After installing or updating OpenRGB, restart your computer before using MineLights. Start OpenRGB, open the **SDK Server** tab, and click **Start Server**. Keep OpenRGB running while Minecraft is open. MineLights connects to the local server at `127.0.0.1:6742` (the default SDK server address and port). - Run Minecraft. - Using anything which is not OpenRGB? 1. Start Minecraft. 2. Wait for MineLights.exe to finish downloading in the background. 3. If all goes well, you will see a dialog asking you if you want to grant `MineLights.exe` permission to access the internet. 4. After accepting, your supported devices will show red. ## Full Changelog & Technical Details - Updated the loader target matrix to Fabric 1.14.3-26.3, Quilt 1.14.4-26.3, Forge 1.17.1-26.3, and NeoForge 1.20.2-26.3. Forge targets skip Minecraft versions without an official Forge release. - Added a dedicated Forge module with per-version build configuration, a Forge client entry point, configuration screen integration, and player-data compatibility overrides. - Updated shared client, effect, and network mixin code for the mappings and APIs used by the Forge versions. - Added a dedicated 1.21.11 target for Fabric, Quilt, and NeoForge, plus NeoForge targets for 1.21.10 and 1.21.11. - Updated Cloth Config and Mod Menu dependency resolution for Fabric and Quilt 1.21.11 and 26.3 builds. Quilt 26.1 and newer now declares the required Quilt Loader version range. - Updated OpenRGB protocol handling to read controller IDs from protocol 6 responses, use those IDs for device requests and lighting updates, and negotiate protocol 5 for compatibility. - Set the Fabric lighting thread as a daemon so it does not keep the client running during shutdown.

# MineLights 2.3.8.3 This release adds native Forge support and expands version support across the loaders. It also fixes compatibility with OpenRGB 1.0. Previous server version compatible (as of 2.3.1)! ## Key Features & Major Changes - Added native Forge support from Minecraft 1.17.1 to 26.3 for every Minecraft version with an official Forge release. - Expanded Minecraft version support for Fabric, Quilt, and NeoForge. - Fixed OpenRGB 1.0 compatibility so MineLights discovers devices. ## Installation / Upgrade Instructions - DELETE your old mine-lights-\*.jar file completely. - Download the jar from this release. - Place the new minelights-\*.jar into your mods folder. - Install Cloth Config, here: [https://modrinth.com/mod/cloth-config](https://modrinth.com/mod/cloth-config) - **OpenRGB (optional):** The latest OpenRGB version is recommended. After installing or updating OpenRGB, restart your computer before using MineLights. Start OpenRGB, open the **SDK Server** tab, and click **Start Server**. Keep OpenRGB running while Minecraft is open. MineLights connects to the local server at `127.0.0.1:6742` (the default SDK server address and port). - Run Minecraft. - Using anything which is not OpenRGB? 1. Start Minecraft. 2. Wait for MineLights.exe to finish downloading in the background. 3. If all goes well, you will see a dialog asking you if you want to grant `MineLights.exe` permission to access the internet. 4. After accepting, your supported devices will show red. ## Full Changelog & Technical Details - Updated the loader target matrix to Fabric 1.14.3-26.3, Quilt 1.14.4-26.3, Forge 1.17.1-26.3, and NeoForge 1.20.2-26.3. Forge targets skip Minecraft versions without an official Forge release. - Added a dedicated Forge module with per-version build configuration, a Forge client entry point, configuration screen integration, and player-data compatibility overrides. - Updated shared client, effect, and network mixin code for the mappings and APIs used by the Forge versions. - Added a dedicated 1.21.11 target for Fabric, Quilt, and NeoForge, plus NeoForge targets for 1.21.10 and 1.21.11. - Updated Cloth Config and Mod Menu dependency resolution for Fabric and Quilt 1.21.11 and 26.3 builds. Quilt 26.1 and newer now declares the required Quilt Loader version range. - Updated OpenRGB protocol handling to read controller IDs from protocol 6 responses, use those IDs for device requests and lighting updates, and negotiate protocol 5 for compatibility. - Set the Fabric lighting thread as a daemon so it does not keep the client running during shutdown.

# MineLights 2.3.8.3 This release adds native Forge support and expands version support across the loaders. It also fixes compatibility with OpenRGB 1.0. Previous server version compatible (as of 2.3.1)! ## Key Features & Major Changes - Added native Forge support from Minecraft 1.17.1 to 26.3 for every Minecraft version with an official Forge release. - Expanded Minecraft version support for Fabric, Quilt, and NeoForge. - Fixed OpenRGB 1.0 compatibility so MineLights discovers devices. ## Installation / Upgrade Instructions - DELETE your old mine-lights-\*.jar file completely. - Download the jar from this release. - Place the new minelights-\*.jar into your mods folder. - Install Cloth Config, here: [https://modrinth.com/mod/cloth-config](https://modrinth.com/mod/cloth-config) - **OpenRGB (optional):** The latest OpenRGB version is recommended. After installing or updating OpenRGB, restart your computer before using MineLights. Start OpenRGB, open the **SDK Server** tab, and click **Start Server**. Keep OpenRGB running while Minecraft is open. MineLights connects to the local server at `127.0.0.1:6742` (the default SDK server address and port). - Run Minecraft. - Using anything which is not OpenRGB? 1. Start Minecraft. 2. Wait for MineLights.exe to finish downloading in the background. 3. If all goes well, you will see a dialog asking you if you want to grant `MineLights.exe` permission to access the internet. 4. After accepting, your supported devices will show red. ## Full Changelog & Technical Details - Updated the loader target matrix to Fabric 1.14.3-26.3, Quilt 1.14.4-26.3, Forge 1.17.1-26.3, and NeoForge 1.20.2-26.3. Forge targets skip Minecraft versions without an official Forge release. - Added a dedicated Forge module with per-version build configuration, a Forge client entry point, configuration screen integration, and player-data compatibility overrides. - Updated shared client, effect, and network mixin code for the mappings and APIs used by the Forge versions. - Added a dedicated 1.21.11 target for Fabric, Quilt, and NeoForge, plus NeoForge targets for 1.21.10 and 1.21.11. - Updated Cloth Config and Mod Menu dependency resolution for Fabric and Quilt 1.21.11 and 26.3 builds. Quilt 26.1 and newer now declares the required Quilt Loader version range. - Updated OpenRGB protocol handling to read controller IDs from protocol 6 responses, use those IDs for device requests and lighting updates, and negotiate protocol 5 for compatibility. - Set the Fabric lighting thread as a daemon so it does not keep the client running during shutdown.

# MineLights 2.3.8.3 This release adds native Forge support and expands version support across the loaders. It also fixes compatibility with OpenRGB 1.0. Previous server version compatible (as of 2.3.1)! ## Key Features & Major Changes - Added native Forge support from Minecraft 1.17.1 to 26.3 for every Minecraft version with an official Forge release. - Expanded Minecraft version support for Fabric, Quilt, and NeoForge. - Fixed OpenRGB 1.0 compatibility so MineLights discovers devices. ## Installation / Upgrade Instructions - DELETE your old mine-lights-\*.jar file completely. - Download the jar from this release. - Place the new minelights-\*.jar into your mods folder. - Install Cloth Config, here: [https://modrinth.com/mod/cloth-config](https://modrinth.com/mod/cloth-config) - **OpenRGB (optional):** The latest OpenRGB version is recommended. After installing or updating OpenRGB, restart your computer before using MineLights. Start OpenRGB, open the **SDK Server** tab, and click **Start Server**. Keep OpenRGB running while Minecraft is open. MineLights connects to the local server at `127.0.0.1:6742` (the default SDK server address and port). - Run Minecraft. - Using anything which is not OpenRGB? 1. Start Minecraft. 2. Wait for MineLights.exe to finish downloading in the background. 3. If all goes well, you will see a dialog asking you if you want to grant `MineLights.exe` permission to access the internet. 4. After accepting, your supported devices will show red. ## Full Changelog & Technical Details - Updated the loader target matrix to Fabric 1.14.3-26.3, Quilt 1.14.4-26.3, Forge 1.17.1-26.3, and NeoForge 1.20.2-26.3. Forge targets skip Minecraft versions without an official Forge release. - Added a dedicated Forge module with per-version build configuration, a Forge client entry point, configuration screen integration, and player-data compatibility overrides. - Updated shared client, effect, and network mixin code for the mappings and APIs used by the Forge versions. - Added a dedicated 1.21.11 target for Fabric, Quilt, and NeoForge, plus NeoForge targets for 1.21.10 and 1.21.11. - Updated Cloth Config and Mod Menu dependency resolution for Fabric and Quilt 1.21.11 and 26.3 builds. Quilt 26.1 and newer now declares the required Quilt Loader version range. - Updated OpenRGB protocol handling to read controller IDs from protocol 6 responses, use those IDs for device requests and lighting updates, and negotiate protocol 5 for compatibility. - Set the Fabric lighting thread as a daemon so it does not keep the client running during shutdown.

# MineLights 2.3.8.3 This release adds native Forge support and expands version support across the loaders. It also fixes compatibility with OpenRGB 1.0. Previous server version compatible (as of 2.3.1)! ## Key Features & Major Changes - Added native Forge support from Minecraft 1.17.1 to 26.3 for every Minecraft version with an official Forge release. - Expanded Minecraft version support for Fabric, Quilt, and NeoForge. - Fixed OpenRGB 1.0 compatibility so MineLights discovers devices. ## Installation / Upgrade Instructions - DELETE your old mine-lights-\*.jar file completely. - Download the jar from this release. - Place the new minelights-\*.jar into your mods folder. - Install Cloth Config, here: [https://modrinth.com/mod/cloth-config](https://modrinth.com/mod/cloth-config) - **OpenRGB (optional):** The latest OpenRGB version is recommended. After installing or updating OpenRGB, restart your computer before using MineLights. Start OpenRGB, open the **SDK Server** tab, and click **Start Server**. Keep OpenRGB running while Minecraft is open. MineLights connects to the local server at `127.0.0.1:6742` (the default SDK server address and port). - Run Minecraft. - Using anything which is not OpenRGB? 1. Start Minecraft. 2. Wait for MineLights.exe to finish downloading in the background. 3. If all goes well, you will see a dialog asking you if you want to grant `MineLights.exe` permission to access the internet. 4. After accepting, your supported devices will show red. ## Full Changelog & Technical Details - Updated the loader target matrix to Fabric 1.14.3-26.3, Quilt 1.14.4-26.3, Forge 1.17.1-26.3, and NeoForge 1.20.2-26.3. Forge targets skip Minecraft versions without an official Forge release. - Added a dedicated Forge module with per-version build configuration, a Forge client entry point, configuration screen integration, and player-data compatibility overrides. - Updated shared client, effect, and network mixin code for the mappings and APIs used by the Forge versions. - Added a dedicated 1.21.11 target for Fabric, Quilt, and NeoForge, plus NeoForge targets for 1.21.10 and 1.21.11. - Updated Cloth Config and Mod Menu dependency resolution for Fabric and Quilt 1.21.11 and 26.3 builds. Quilt 26.1 and newer now declares the required Quilt Loader version range. - Updated OpenRGB protocol handling to read controller IDs from protocol 6 responses, use those IDs for device requests and lighting updates, and negotiate protocol 5 for compatibility. - Set the Fabric lighting thread as a daemon so it does not keep the client running during shutdown.

# MineLights 2.3.8.3 This release adds native Forge support and expands version support across the loaders. It also fixes compatibility with OpenRGB 1.0. Previous server version compatible (as of 2.3.1)! ## Key Features & Major Changes - Added native Forge support from Minecraft 1.17.1 to 26.3 for every Minecraft version with an official Forge release. - Expanded Minecraft version support for Fabric, Quilt, and NeoForge. - Fixed OpenRGB 1.0 compatibility so MineLights discovers devices. ## Installation / Upgrade Instructions - DELETE your old mine-lights-\*.jar file completely. - Download the jar from this release. - Place the new minelights-\*.jar into your mods folder. - Install Cloth Config, here: [https://modrinth.com/mod/cloth-config](https://modrinth.com/mod/cloth-config) - **OpenRGB (optional):** The latest OpenRGB version is recommended. After installing or updating OpenRGB, restart your computer before using MineLights. Start OpenRGB, open the **SDK Server** tab, and click **Start Server**. Keep OpenRGB running while Minecraft is open. MineLights connects to the local server at `127.0.0.1:6742` (the default SDK server address and port). - Run Minecraft. - Using anything which is not OpenRGB? 1. Start Minecraft. 2. Wait for MineLights.exe to finish downloading in the background. 3. If all goes well, you will see a dialog asking you if you want to grant `MineLights.exe` permission to access the internet. 4. After accepting, your supported devices will show red. ## Full Changelog & Technical Details - Updated the loader target matrix to Fabric 1.14.3-26.3, Quilt 1.14.4-26.3, Forge 1.17.1-26.3, and NeoForge 1.20.2-26.3. Forge targets skip Minecraft versions without an official Forge release. - Added a dedicated Forge module with per-version build configuration, a Forge client entry point, configuration screen integration, and player-data compatibility overrides. - Updated shared client, effect, and network mixin code for the mappings and APIs used by the Forge versions. - Added a dedicated 1.21.11 target for Fabric, Quilt, and NeoForge, plus NeoForge targets for 1.21.10 and 1.21.11. - Updated Cloth Config and Mod Menu dependency resolution for Fabric and Quilt 1.21.11 and 26.3 builds. Quilt 26.1 and newer now declares the required Quilt Loader version range. - Updated OpenRGB protocol handling to read controller IDs from protocol 6 responses, use those IDs for device requests and lighting updates, and negotiate protocol 5 for compatibility. - Set the Fabric lighting thread as a daemon so it does not keep the client running during shutdown.

# MineLights 2.3.8.3 This release adds native Forge support and expands version support across the loaders. It also fixes compatibility with OpenRGB 1.0. Previous server version compatible (as of 2.3.1)! ## Key Features & Major Changes - Added native Forge support from Minecraft 1.17.1 to 26.3 for every Minecraft version with an official Forge release. - Expanded Minecraft version support for Fabric, Quilt, and NeoForge. - Fixed OpenRGB 1.0 compatibility so MineLights discovers devices. ## Installation / Upgrade Instructions - DELETE your old mine-lights-\*.jar file completely. - Download the jar from this release. - Place the new minelights-\*.jar into your mods folder. - Install Cloth Config, here: [https://modrinth.com/mod/cloth-config](https://modrinth.com/mod/cloth-config) - **OpenRGB (optional):** The latest OpenRGB version is recommended. After installing or updating OpenRGB, restart your computer before using MineLights. Start OpenRGB, open the **SDK Server** tab, and click **Start Server**. Keep OpenRGB running while Minecraft is open. MineLights connects to the local server at `127.0.0.1:6742` (the default SDK server address and port). - Run Minecraft. - Using anything which is not OpenRGB? 1. Start Minecraft. 2. Wait for MineLights.exe to finish downloading in the background. 3. If all goes well, you will see a dialog asking you if you want to grant `MineLights.exe` permission to access the internet. 4. After accepting, your supported devices will show red. ## Full Changelog & Technical Details - Updated the loader target matrix to Fabric 1.14.3-26.3, Quilt 1.14.4-26.3, Forge 1.17.1-26.3, and NeoForge 1.20.2-26.3. Forge targets skip Minecraft versions without an official Forge release. - Added a dedicated Forge module with per-version build configuration, a Forge client entry point, configuration screen integration, and player-data compatibility overrides. - Updated shared client, effect, and network mixin code for the mappings and APIs used by the Forge versions. - Added a dedicated 1.21.11 target for Fabric, Quilt, and NeoForge, plus NeoForge targets for 1.21.10 and 1.21.11. - Updated Cloth Config and Mod Menu dependency resolution for Fabric and Quilt 1.21.11 and 26.3 builds. Quilt 26.1 and newer now declares the required Quilt Loader version range. - Updated OpenRGB protocol handling to read controller IDs from protocol 6 responses, use those IDs for device requests and lighting updates, and negotiate protocol 5 for compatibility. - Set the Fabric lighting thread as a daemon so it does not keep the client running during shutdown.

# MineLights 2.3.8.3 This release adds native Forge support and expands version support across the loaders. It also fixes compatibility with OpenRGB 1.0. Previous server version compatible (as of 2.3.1)! ## Key Features & Major Changes - Added native Forge support from Minecraft 1.17.1 to 26.3 for every Minecraft version with an official Forge release. - Expanded Minecraft version support for Fabric, Quilt, and NeoForge. - Fixed OpenRGB 1.0 compatibility so MineLights discovers devices. ## Installation / Upgrade Instructions - DELETE your old mine-lights-\*.jar file completely. - Download the jar from this release. - Place the new minelights-\*.jar into your mods folder. - Install Cloth Config, here: [https://modrinth.com/mod/cloth-config](https://modrinth.com/mod/cloth-config) - **OpenRGB (optional):** The latest OpenRGB version is recommended. After installing or updating OpenRGB, restart your computer before using MineLights. Start OpenRGB, open the **SDK Server** tab, and click **Start Server**. Keep OpenRGB running while Minecraft is open. MineLights connects to the local server at `127.0.0.1:6742` (the default SDK server address and port). - Run Minecraft. - Using anything which is not OpenRGB? 1. Start Minecraft. 2. Wait for MineLights.exe to finish downloading in the background. 3. If all goes well, you will see a dialog asking you if you want to grant `MineLights.exe` permission to access the internet. 4. After accepting, your supported devices will show red. ## Full Changelog & Technical Details - Updated the loader target matrix to Fabric 1.14.3-26.3, Quilt 1.14.4-26.3, Forge 1.17.1-26.3, and NeoForge 1.20.2-26.3. Forge targets skip Minecraft versions without an official Forge release. - Added a dedicated Forge module with per-version build configuration, a Forge client entry point, configuration screen integration, and player-data compatibility overrides. - Updated shared client, effect, and network mixin code for the mappings and APIs used by the Forge versions. - Added a dedicated 1.21.11 target for Fabric, Quilt, and NeoForge, plus NeoForge targets for 1.21.10 and 1.21.11. - Updated Cloth Config and Mod Menu dependency resolution for Fabric and Quilt 1.21.11 and 26.3 builds. Quilt 26.1 and newer now declares the required Quilt Loader version range. - Updated OpenRGB protocol handling to read controller IDs from protocol 6 responses, use those IDs for device requests and lighting updates, and negotiate protocol 5 for compatibility. - Set the Fabric lighting thread as a daemon so it does not keep the client running during shutdown.

# MineLights 2.3.8.3 This release adds native Forge support and expands version support across the loaders. It also fixes compatibility with OpenRGB 1.0. Previous server version compatible (as of 2.3.1)! ## Key Features & Major Changes - Added native Forge support from Minecraft 1.17.1 to 26.3 for every Minecraft version with an official Forge release. - Expanded Minecraft version support for Fabric, Quilt, and NeoForge. - Fixed OpenRGB 1.0 compatibility so MineLights discovers devices. ## Installation / Upgrade Instructions - DELETE your old mine-lights-\*.jar file completely. - Download the jar from this release. - Place the new minelights-\*.jar into your mods folder. - Install Cloth Config, here: [https://modrinth.com/mod/cloth-config](https://modrinth.com/mod/cloth-config) - **OpenRGB (optional):** The latest OpenRGB version is recommended. After installing or updating OpenRGB, restart your computer before using MineLights. Start OpenRGB, open the **SDK Server** tab, and click **Start Server**. Keep OpenRGB running while Minecraft is open. MineLights connects to the local server at `127.0.0.1:6742` (the default SDK server address and port). - Run Minecraft. - Using anything which is not OpenRGB? 1. Start Minecraft. 2. Wait for MineLights.exe to finish downloading in the background. 3. If all goes well, you will see a dialog asking you if you want to grant `MineLights.exe` permission to access the internet. 4. After accepting, your supported devices will show red. ## Full Changelog & Technical Details - Updated the loader target matrix to Fabric 1.14.3-26.3, Quilt 1.14.4-26.3, Forge 1.17.1-26.3, and NeoForge 1.20.2-26.3. Forge targets skip Minecraft versions without an official Forge release. - Added a dedicated Forge module with per-version build configuration, a Forge client entry point, configuration screen integration, and player-data compatibility overrides. - Updated shared client, effect, and network mixin code for the mappings and APIs used by the Forge versions. - Added a dedicated 1.21.11 target for Fabric, Quilt, and NeoForge, plus NeoForge targets for 1.21.10 and 1.21.11. - Updated Cloth Config and Mod Menu dependency resolution for Fabric and Quilt 1.21.11 and 26.3 builds. Quilt 26.1 and newer now declares the required Quilt Loader version range. - Updated OpenRGB protocol handling to read controller IDs from protocol 6 responses, use those IDs for device requests and lighting updates, and negotiate protocol 5 for compatibility. - Set the Fabric lighting thread as a daemon so it does not keep the client running during shutdown.

# MineLights 2.3.8.3 This release adds native Forge support and expands version support across the loaders. It also fixes compatibility with OpenRGB 1.0. Previous server version compatible (as of 2.3.1)! ## Key Features & Major Changes - Added native Forge support from Minecraft 1.17.1 to 26.3 for every Minecraft version with an official Forge release. - Expanded Minecraft version support for Fabric, Quilt, and NeoForge. - Fixed OpenRGB 1.0 compatibility so MineLights discovers devices. ## Installation / Upgrade Instructions - DELETE your old mine-lights-\*.jar file completely. - Download the jar from this release. - Place the new minelights-\*.jar into your mods folder. - Install Cloth Config, here: [https://modrinth.com/mod/cloth-config](https://modrinth.com/mod/cloth-config) - **OpenRGB (optional):** The latest OpenRGB version is recommended. After installing or updating OpenRGB, restart your computer before using MineLights. Start OpenRGB, open the **SDK Server** tab, and click **Start Server**. Keep OpenRGB running while Minecraft is open. MineLights connects to the local server at `127.0.0.1:6742` (the default SDK server address and port). - Run Minecraft. - Using anything which is not OpenRGB? 1. Start Minecraft. 2. Wait for MineLights.exe to finish downloading in the background. 3. If all goes well, you will see a dialog asking you if you want to grant `MineLights.exe` permission to access the internet. 4. After accepting, your supported devices will show red. ## Full Changelog & Technical Details - Updated the loader target matrix to Fabric 1.14.3-26.3, Quilt 1.14.4-26.3, Forge 1.17.1-26.3, and NeoForge 1.20.2-26.3. Forge targets skip Minecraft versions without an official Forge release. - Added a dedicated Forge module with per-version build configuration, a Forge client entry point, configuration screen integration, and player-data compatibility overrides. - Updated shared client, effect, and network mixin code for the mappings and APIs used by the Forge versions. - Added a dedicated 1.21.11 target for Fabric, Quilt, and NeoForge, plus NeoForge targets for 1.21.10 and 1.21.11. - Updated Cloth Config and Mod Menu dependency resolution for Fabric and Quilt 1.21.11 and 26.3 builds. Quilt 26.1 and newer now declares the required Quilt Loader version range. - Updated OpenRGB protocol handling to read controller IDs from protocol 6 responses, use those IDs for device requests and lighting updates, and negotiate protocol 5 for compatibility. - Set the Fabric lighting thread as a daemon so it does not keep the client running during shutdown.

# MineLights 2.3.8.3 This release adds native Forge support and expands version support across the loaders. It also fixes compatibility with OpenRGB 1.0. Previous server version compatible (as of 2.3.1)! ## Key Features & Major Changes - Added native Forge support from Minecraft 1.17.1 to 26.3 for every Minecraft version with an official Forge release. - Expanded Minecraft version support for Fabric, Quilt, and NeoForge. - Fixed OpenRGB 1.0 compatibility so MineLights discovers devices. ## Installation / Upgrade Instructions - DELETE your old mine-lights-\*.jar file completely. - Download the jar from this release. - Place the new minelights-\*.jar into your mods folder. - Install Cloth Config, here: [https://modrinth.com/mod/cloth-config](https://modrinth.com/mod/cloth-config) - **OpenRGB (optional):** The latest OpenRGB version is recommended. After installing or updating OpenRGB, restart your computer before using MineLights. Start OpenRGB, open the **SDK Server** tab, and click **Start Server**. Keep OpenRGB running while Minecraft is open. MineLights connects to the local server at `127.0.0.1:6742` (the default SDK server address and port). - Run Minecraft. - Using anything which is not OpenRGB? 1. Start Minecraft. 2. Wait for MineLights.exe to finish downloading in the background. 3. If all goes well, you will see a dialog asking you if you want to grant `MineLights.exe` permission to access the internet. 4. After accepting, your supported devices will show red. ## Full Changelog & Technical Details - Updated the loader target matrix to Fabric 1.14.3-26.3, Quilt 1.14.4-26.3, Forge 1.17.1-26.3, and NeoForge 1.20.2-26.3. Forge targets skip Minecraft versions without an official Forge release. - Added a dedicated Forge module with per-version build configuration, a Forge client entry point, configuration screen integration, and player-data compatibility overrides. - Updated shared client, effect, and network mixin code for the mappings and APIs used by the Forge versions. - Added a dedicated 1.21.11 target for Fabric, Quilt, and NeoForge, plus NeoForge targets for 1.21.10 and 1.21.11. - Updated Cloth Config and Mod Menu dependency resolution for Fabric and Quilt 1.21.11 and 26.3 builds. Quilt 26.1 and newer now declares the required Quilt Loader version range. - Updated OpenRGB protocol handling to read controller IDs from protocol 6 responses, use those IDs for device requests and lighting updates, and negotiate protocol 5 for compatibility. - Set the Fabric lighting thread as a daemon so it does not keep the client running during shutdown.

# MineLights 2.3.8.3 This release adds native Forge support and expands version support across the loaders. It also fixes compatibility with OpenRGB 1.0. Previous server version compatible (as of 2.3.1)! ## Key Features & Major Changes - Added native Forge support from Minecraft 1.17.1 to 26.3 for every Minecraft version with an official Forge release. - Expanded Minecraft version support for Fabric, Quilt, and NeoForge. - Fixed OpenRGB 1.0 compatibility so MineLights discovers devices. ## Installation / Upgrade Instructions - DELETE your old mine-lights-\*.jar file completely. - Download the jar from this release. - Place the new minelights-\*.jar into your mods folder. - Install Cloth Config, here: [https://modrinth.com/mod/cloth-config](https://modrinth.com/mod/cloth-config) - **OpenRGB (optional):** The latest OpenRGB version is recommended. After installing or updating OpenRGB, restart your computer before using MineLights. Start OpenRGB, open the **SDK Server** tab, and click **Start Server**. Keep OpenRGB running while Minecraft is open. MineLights connects to the local server at `127.0.0.1:6742` (the default SDK server address and port). - Run Minecraft. - Using anything which is not OpenRGB? 1. Start Minecraft. 2. Wait for MineLights.exe to finish downloading in the background. 3. If all goes well, you will see a dialog asking you if you want to grant `MineLights.exe` permission to access the internet. 4. After accepting, your supported devices will show red. ## Full Changelog & Technical Details - Updated the loader target matrix to Fabric 1.14.3-26.3, Quilt 1.14.4-26.3, Forge 1.17.1-26.3, and NeoForge 1.20.2-26.3. Forge targets skip Minecraft versions without an official Forge release. - Added a dedicated Forge module with per-version build configuration, a Forge client entry point, configuration screen integration, and player-data compatibility overrides. - Updated shared client, effect, and network mixin code for the mappings and APIs used by the Forge versions. - Added a dedicated 1.21.11 target for Fabric, Quilt, and NeoForge, plus NeoForge targets for 1.21.10 and 1.21.11. - Updated Cloth Config and Mod Menu dependency resolution for Fabric and Quilt 1.21.11 and 26.3 builds. Quilt 26.1 and newer now declares the required Quilt Loader version range. - Updated OpenRGB protocol handling to read controller IDs from protocol 6 responses, use those IDs for device requests and lighting updates, and negotiate protocol 5 for compatibility. - Set the Fabric lighting thread as a daemon so it does not keep the client running during shutdown.

# MineLights 2.3.8.3 This release adds native Forge support and expands version support across the loaders. It also fixes compatibility with OpenRGB 1.0. Previous server version compatible (as of 2.3.1)! ## Key Features & Major Changes - Added native Forge support from Minecraft 1.17.1 to 26.3 for every Minecraft version with an official Forge release. - Expanded Minecraft version support for Fabric, Quilt, and NeoForge. - Fixed OpenRGB 1.0 compatibility so MineLights discovers devices. ## Installation / Upgrade Instructions - DELETE your old mine-lights-\*.jar file completely. - Download the jar from this release. - Place the new minelights-\*.jar into your mods folder. - Install Cloth Config, here: [https://modrinth.com/mod/cloth-config](https://modrinth.com/mod/cloth-config) - **OpenRGB (optional):** The latest OpenRGB version is recommended. After installing or updating OpenRGB, restart your computer before using MineLights. Start OpenRGB, open the **SDK Server** tab, and click **Start Server**. Keep OpenRGB running while Minecraft is open. MineLights connects to the local server at `127.0.0.1:6742` (the default SDK server address and port). - Run Minecraft. - Using anything which is not OpenRGB? 1. Start Minecraft. 2. Wait for MineLights.exe to finish downloading in the background. 3. If all goes well, you will see a dialog asking you if you want to grant `MineLights.exe` permission to access the internet. 4. After accepting, your supported devices will show red. ## Full Changelog & Technical Details - Updated the loader target matrix to Fabric 1.14.3-26.3, Quilt 1.14.4-26.3, Forge 1.17.1-26.3, and NeoForge 1.20.2-26.3. Forge targets skip Minecraft versions without an official Forge release. - Added a dedicated Forge module with per-version build configuration, a Forge client entry point, configuration screen integration, and player-data compatibility overrides. - Updated shared client, effect, and network mixin code for the mappings and APIs used by the Forge versions. - Added a dedicated 1.21.11 target for Fabric, Quilt, and NeoForge, plus NeoForge targets for 1.21.10 and 1.21.11. - Updated Cloth Config and Mod Menu dependency resolution for Fabric and Quilt 1.21.11 and 26.3 builds. Quilt 26.1 and newer now declares the required Quilt Loader version range. - Updated OpenRGB protocol handling to read controller IDs from protocol 6 responses, use those IDs for device requests and lighting updates, and negotiate protocol 5 for compatibility. - Set the Fabric lighting thread as a daemon so it does not keep the client running during shutdown.

# MineLights 2.3.8.3 This release adds native Forge support and expands version support across the loaders. It also fixes compatibility with OpenRGB 1.0. Previous server version compatible (as of 2.3.1)! ## Key Features & Major Changes - Added native Forge support from Minecraft 1.17.1 to 26.3 for every Minecraft version with an official Forge release. - Expanded Minecraft version support for Fabric, Quilt, and NeoForge. - Fixed OpenRGB 1.0 compatibility so MineLights discovers devices. ## Installation / Upgrade Instructions - DELETE your old mine-lights-\*.jar file completely. - Download the jar from this release. - Place the new minelights-\*.jar into your mods folder. - Install Cloth Config, here: [https://modrinth.com/mod/cloth-config](https://modrinth.com/mod/cloth-config) - **OpenRGB (optional):** The latest OpenRGB version is recommended. After installing or updating OpenRGB, restart your computer before using MineLights. Start OpenRGB, open the **SDK Server** tab, and click **Start Server**. Keep OpenRGB running while Minecraft is open. MineLights connects to the local server at `127.0.0.1:6742` (the default SDK server address and port). - Run Minecraft. - Using anything which is not OpenRGB? 1. Start Minecraft. 2. Wait for MineLights.exe to finish downloading in the background. 3. If all goes well, you will see a dialog asking you if you want to grant `MineLights.exe` permission to access the internet. 4. After accepting, your supported devices will show red. ## Full Changelog & Technical Details - Updated the loader target matrix to Fabric 1.14.3-26.3, Quilt 1.14.4-26.3, Forge 1.17.1-26.3, and NeoForge 1.20.2-26.3. Forge targets skip Minecraft versions without an official Forge release. - Added a dedicated Forge module with per-version build configuration, a Forge client entry point, configuration screen integration, and player-data compatibility overrides. - Updated shared client, effect, and network mixin code for the mappings and APIs used by the Forge versions. - Added a dedicated 1.21.11 target for Fabric, Quilt, and NeoForge, plus NeoForge targets for 1.21.10 and 1.21.11. - Updated Cloth Config and Mod Menu dependency resolution for Fabric and Quilt 1.21.11 and 26.3 builds. Quilt 26.1 and newer now declares the required Quilt Loader version range. - Updated OpenRGB protocol handling to read controller IDs from protocol 6 responses, use those IDs for device requests and lighting updates, and negotiate protocol 5 for compatibility. - Set the Fabric lighting thread as a daemon so it does not keep the client running during shutdown.

# MineLights 2.3.8.3 This release adds native Forge support and expands version support across the loaders. It also fixes compatibility with OpenRGB 1.0. Previous server version compatible (as of 2.3.1)! ## Key Features & Major Changes - Added native Forge support from Minecraft 1.17.1 to 26.3 for every Minecraft version with an official Forge release. - Expanded Minecraft version support for Fabric, Quilt, and NeoForge. - Fixed OpenRGB 1.0 compatibility so MineLights discovers devices. ## Installation / Upgrade Instructions - DELETE your old mine-lights-\*.jar file completely. - Download the jar from this release. - Place the new minelights-\*.jar into your mods folder. - Install Cloth Config, here: [https://modrinth.com/mod/cloth-config](https://modrinth.com/mod/cloth-config) - **OpenRGB (optional):** The latest OpenRGB version is recommended. After installing or updating OpenRGB, restart your computer before using MineLights. Start OpenRGB, open the **SDK Server** tab, and click **Start Server**. Keep OpenRGB running while Minecraft is open. MineLights connects to the local server at `127.0.0.1:6742` (the default SDK server address and port). - Run Minecraft. - Using anything which is not OpenRGB? 1. Start Minecraft. 2. Wait for MineLights.exe to finish downloading in the background. 3. If all goes well, you will see a dialog asking you if you want to grant `MineLights.exe` permission to access the internet. 4. After accepting, your supported devices will show red. ## Full Changelog & Technical Details - Updated the loader target matrix to Fabric 1.14.3-26.3, Quilt 1.14.4-26.3, Forge 1.17.1-26.3, and NeoForge 1.20.2-26.3. Forge targets skip Minecraft versions without an official Forge release. - Added a dedicated Forge module with per-version build configuration, a Forge client entry point, configuration screen integration, and player-data compatibility overrides. - Updated shared client, effect, and network mixin code for the mappings and APIs used by the Forge versions. - Added a dedicated 1.21.11 target for Fabric, Quilt, and NeoForge, plus NeoForge targets for 1.21.10 and 1.21.11. - Updated Cloth Config and Mod Menu dependency resolution for Fabric and Quilt 1.21.11 and 26.3 builds. Quilt 26.1 and newer now declares the required Quilt Loader version range. - Updated OpenRGB protocol handling to read controller IDs from protocol 6 responses, use those IDs for device requests and lighting updates, and negotiate protocol 5 for compatibility. - Set the Fabric lighting thread as a daemon so it does not keep the client running during shutdown.

# MineLights 2.3.8.3 This release adds native Forge support and expands version support across the loaders. It also fixes compatibility with OpenRGB 1.0. Previous server version compatible (as of 2.3.1)! ## Key Features & Major Changes - Added native Forge support from Minecraft 1.17.1 to 26.3 for every Minecraft version with an official Forge release. - Expanded Minecraft version support for Fabric, Quilt, and NeoForge. - Fixed OpenRGB 1.0 compatibility so MineLights discovers devices. ## Installation / Upgrade Instructions - DELETE your old mine-lights-\*.jar file completely. - Download the jar from this release. - Place the new minelights-\*.jar into your mods folder. - Install Cloth Config, here: [https://modrinth.com/mod/cloth-config](https://modrinth.com/mod/cloth-config) - **OpenRGB (optional):** The latest OpenRGB version is recommended. After installing or updating OpenRGB, restart your computer before using MineLights. Start OpenRGB, open the **SDK Server** tab, and click **Start Server**. Keep OpenRGB running while Minecraft is open. MineLights connects to the local server at `127.0.0.1:6742` (the default SDK server address and port). - Run Minecraft. - Using anything which is not OpenRGB? 1. Start Minecraft. 2. Wait for MineLights.exe to finish downloading in the background. 3. If all goes well, you will see a dialog asking you if you want to grant `MineLights.exe` permission to access the internet. 4. After accepting, your supported devices will show red. ## Full Changelog & Technical Details - Updated the loader target matrix to Fabric 1.14.3-26.3, Quilt 1.14.4-26.3, Forge 1.17.1-26.3, and NeoForge 1.20.2-26.3. Forge targets skip Minecraft versions without an official Forge release. - Added a dedicated Forge module with per-version build configuration, a Forge client entry point, configuration screen integration, and player-data compatibility overrides. - Updated shared client, effect, and network mixin code for the mappings and APIs used by the Forge versions. - Added a dedicated 1.21.11 target for Fabric, Quilt, and NeoForge, plus NeoForge targets for 1.21.10 and 1.21.11. - Updated Cloth Config and Mod Menu dependency resolution for Fabric and Quilt 1.21.11 and 26.3 builds. Quilt 26.1 and newer now declares the required Quilt Loader version range. - Updated OpenRGB protocol handling to read controller IDs from protocol 6 responses, use those IDs for device requests and lighting updates, and negotiate protocol 5 for compatibility. - Set the Fabric lighting thread as a daemon so it does not keep the client running during shutdown.

# MineLights 2.3.8.3 This release adds native Forge support and expands version support across the loaders. It also fixes compatibility with OpenRGB 1.0. Previous server version compatible (as of 2.3.1)! ## Key Features & Major Changes - Added native Forge support from Minecraft 1.17.1 to 26.3 for every Minecraft version with an official Forge release. - Expanded Minecraft version support for Fabric, Quilt, and NeoForge. - Fixed OpenRGB 1.0 compatibility so MineLights discovers devices. ## Installation / Upgrade Instructions - DELETE your old mine-lights-\*.jar file completely. - Download the jar from this release. - Place the new minelights-\*.jar into your mods folder. - Install Cloth Config, here: [https://modrinth.com/mod/cloth-config](https://modrinth.com/mod/cloth-config) - **OpenRGB (optional):** The latest OpenRGB version is recommended. After installing or updating OpenRGB, restart your computer before using MineLights. Start OpenRGB, open the **SDK Server** tab, and click **Start Server**. Keep OpenRGB running while Minecraft is open. MineLights connects to the local server at `127.0.0.1:6742` (the default SDK server address and port). - Run Minecraft. - Using anything which is not OpenRGB? 1. Start Minecraft. 2. Wait for MineLights.exe to finish downloading in the background. 3. If all goes well, you will see a dialog asking you if you want to grant `MineLights.exe` permission to access the internet. 4. After accepting, your supported devices will show red. ## Full Changelog & Technical Details - Updated the loader target matrix to Fabric 1.14.3-26.3, Quilt 1.14.4-26.3, Forge 1.17.1-26.3, and NeoForge 1.20.2-26.3. Forge targets skip Minecraft versions without an official Forge release. - Added a dedicated Forge module with per-version build configuration, a Forge client entry point, configuration screen integration, and player-data compatibility overrides. - Updated shared client, effect, and network mixin code for the mappings and APIs used by the Forge versions. - Added a dedicated 1.21.11 target for Fabric, Quilt, and NeoForge, plus NeoForge targets for 1.21.10 and 1.21.11. - Updated Cloth Config and Mod Menu dependency resolution for Fabric and Quilt 1.21.11 and 26.3 builds. Quilt 26.1 and newer now declares the required Quilt Loader version range. - Updated OpenRGB protocol handling to read controller IDs from protocol 6 responses, use those IDs for device requests and lighting updates, and negotiate protocol 5 for compatibility. - Set the Fabric lighting thread as a daemon so it does not keep the client running during shutdown.

# MineLights 2.3.8.3 This release adds native Forge support and expands version support across the loaders. It also fixes compatibility with OpenRGB 1.0. Previous server version compatible (as of 2.3.1)! ## Key Features & Major Changes - Added native Forge support from Minecraft 1.17.1 to 26.3 for every Minecraft version with an official Forge release. - Expanded Minecraft version support for Fabric, Quilt, and NeoForge. - Fixed OpenRGB 1.0 compatibility so MineLights discovers devices. ## Installation / Upgrade Instructions - DELETE your old mine-lights-\*.jar file completely. - Download the jar from this release. - Place the new minelights-\*.jar into your mods folder. - Install Cloth Config, here: [https://modrinth.com/mod/cloth-config](https://modrinth.com/mod/cloth-config) - **OpenRGB (optional):** The latest OpenRGB version is recommended. After installing or updating OpenRGB, restart your computer before using MineLights. Start OpenRGB, open the **SDK Server** tab, and click **Start Server**. Keep OpenRGB running while Minecraft is open. MineLights connects to the local server at `127.0.0.1:6742` (the default SDK server address and port). - Run Minecraft. - Using anything which is not OpenRGB? 1. Start Minecraft. 2. Wait for MineLights.exe to finish downloading in the background. 3. If all goes well, you will see a dialog asking you if you want to grant `MineLights.exe` permission to access the internet. 4. After accepting, your supported devices will show red. ## Full Changelog & Technical Details - Updated the loader target matrix to Fabric 1.14.3-26.3, Quilt 1.14.4-26.3, Forge 1.17.1-26.3, and NeoForge 1.20.2-26.3. Forge targets skip Minecraft versions without an official Forge release. - Added a dedicated Forge module with per-version build configuration, a Forge client entry point, configuration screen integration, and player-data compatibility overrides. - Updated shared client, effect, and network mixin code for the mappings and APIs used by the Forge versions. - Added a dedicated 1.21.11 target for Fabric, Quilt, and NeoForge, plus NeoForge targets for 1.21.10 and 1.21.11. - Updated Cloth Config and Mod Menu dependency resolution for Fabric and Quilt 1.21.11 and 26.3 builds. Quilt 26.1 and newer now declares the required Quilt Loader version range. - Updated OpenRGB protocol handling to read controller IDs from protocol 6 responses, use those IDs for device requests and lighting updates, and negotiate protocol 5 for compatibility. - Set the Fabric lighting thread as a daemon so it does not keep the client running during shutdown.

# MineLights 2.3.8.3 This release adds native Forge support and expands version support across the loaders. It also fixes compatibility with OpenRGB 1.0. Previous server version compatible (as of 2.3.1)! ## Key Features & Major Changes - Added native Forge support from Minecraft 1.17.1 to 26.3 for every Minecraft version with an official Forge release. - Expanded Minecraft version support for Fabric, Quilt, and NeoForge. - Fixed OpenRGB 1.0 compatibility so MineLights discovers devices. ## Installation / Upgrade Instructions - DELETE your old mine-lights-\*.jar file completely. - Download the jar from this release. - Place the new minelights-\*.jar into your mods folder. - Install Cloth Config, here: [https://modrinth.com/mod/cloth-config](https://modrinth.com/mod/cloth-config) - **OpenRGB (optional):** The latest OpenRGB version is recommended. After installing or updating OpenRGB, restart your computer before using MineLights. Start OpenRGB, open the **SDK Server** tab, and click **Start Server**. Keep OpenRGB running while Minecraft is open. MineLights connects to the local server at `127.0.0.1:6742` (the default SDK server address and port). - Run Minecraft. - Using anything which is not OpenRGB? 1. Start Minecraft. 2. Wait for MineLights.exe to finish downloading in the background. 3. If all goes well, you will see a dialog asking you if you want to grant `MineLights.exe` permission to access the internet. 4. After accepting, your supported devices will show red. ## Full Changelog & Technical Details - Updated the loader target matrix to Fabric 1.14.3-26.3, Quilt 1.14.4-26.3, Forge 1.17.1-26.3, and NeoForge 1.20.2-26.3. Forge targets skip Minecraft versions without an official Forge release. - Added a dedicated Forge module with per-version build configuration, a Forge client entry point, configuration screen integration, and player-data compatibility overrides. - Updated shared client, effect, and network mixin code for the mappings and APIs used by the Forge versions. - Added a dedicated 1.21.11 target for Fabric, Quilt, and NeoForge, plus NeoForge targets for 1.21.10 and 1.21.11. - Updated Cloth Config and Mod Menu dependency resolution for Fabric and Quilt 1.21.11 and 26.3 builds. Quilt 26.1 and newer now declares the required Quilt Loader version range. - Updated OpenRGB protocol handling to read controller IDs from protocol 6 responses, use those IDs for device requests and lighting updates, and negotiate protocol 5 for compatibility. - Set the Fabric lighting thread as a daemon so it does not keep the client running during shutdown.

# MineLights 2.3.8.3 This release adds native Forge support and expands version support across the loaders. It also fixes compatibility with OpenRGB 1.0. Previous server version compatible (as of 2.3.1)! ## Key Features & Major Changes - Added native Forge support from Minecraft 1.17.1 to 26.3 for every Minecraft version with an official Forge release. - Expanded Minecraft version support for Fabric, Quilt, and NeoForge. - Fixed OpenRGB 1.0 compatibility so MineLights discovers devices. ## Installation / Upgrade Instructions - DELETE your old mine-lights-\*.jar file completely. - Download the jar from this release. - Place the new minelights-\*.jar into your mods folder. - Install Cloth Config, here: [https://modrinth.com/mod/cloth-config](https://modrinth.com/mod/cloth-config) - **OpenRGB (optional):** The latest OpenRGB version is recommended. After installing or updating OpenRGB, restart your computer before using MineLights. Start OpenRGB, open the **SDK Server** tab, and click **Start Server**. Keep OpenRGB running while Minecraft is open. MineLights connects to the local server at `127.0.0.1:6742` (the default SDK server address and port). - Run Minecraft. - Using anything which is not OpenRGB? 1. Start Minecraft. 2. Wait for MineLights.exe to finish downloading in the background. 3. If all goes well, you will see a dialog asking you if you want to grant `MineLights.exe` permission to access the internet. 4. After accepting, your supported devices will show red. ## Full Changelog & Technical Details - Updated the loader target matrix to Fabric 1.14.3-26.3, Quilt 1.14.4-26.3, Forge 1.17.1-26.3, and NeoForge 1.20.2-26.3. Forge targets skip Minecraft versions without an official Forge release. - Added a dedicated Forge module with per-version build configuration, a Forge client entry point, configuration screen integration, and player-data compatibility overrides. - Updated shared client, effect, and network mixin code for the mappings and APIs used by the Forge versions. - Added a dedicated 1.21.11 target for Fabric, Quilt, and NeoForge, plus NeoForge targets for 1.21.10 and 1.21.11. - Updated Cloth Config and Mod Menu dependency resolution for Fabric and Quilt 1.21.11 and 26.3 builds. Quilt 26.1 and newer now declares the required Quilt Loader version range. - Updated OpenRGB protocol handling to read controller IDs from protocol 6 responses, use those IDs for device requests and lighting updates, and negotiate protocol 5 for compatibility. - Set the Fabric lighting thread as a daemon so it does not keep the client running during shutdown.

# MineLights 2.3.8.3 This release adds native Forge support and expands version support across the loaders. It also fixes compatibility with OpenRGB 1.0. Previous server version compatible (as of 2.3.1)! ## Key Features & Major Changes - Added native Forge support from Minecraft 1.17.1 to 26.3 for every Minecraft version with an official Forge release. - Expanded Minecraft version support for Fabric, Quilt, and NeoForge. - Fixed OpenRGB 1.0 compatibility so MineLights discovers devices. ## Installation / Upgrade Instructions - DELETE your old mine-lights-\*.jar file completely. - Download the jar from this release. - Place the new minelights-\*.jar into your mods folder. - Install Cloth Config, here: [https://modrinth.com/mod/cloth-config](https://modrinth.com/mod/cloth-config) - **OpenRGB (optional):** The latest OpenRGB version is recommended. After installing or updating OpenRGB, restart your computer before using MineLights. Start OpenRGB, open the **SDK Server** tab, and click **Start Server**. Keep OpenRGB running while Minecraft is open. MineLights connects to the local server at `127.0.0.1:6742` (the default SDK server address and port). - Run Minecraft. - Using anything which is not OpenRGB? 1. Start Minecraft. 2. Wait for MineLights.exe to finish downloading in the background. 3. If all goes well, you will see a dialog asking you if you want to grant `MineLights.exe` permission to access the internet. 4. After accepting, your supported devices will show red. ## Full Changelog & Technical Details - Updated the loader target matrix to Fabric 1.14.3-26.3, Quilt 1.14.4-26.3, Forge 1.17.1-26.3, and NeoForge 1.20.2-26.3. Forge targets skip Minecraft versions without an official Forge release. - Added a dedicated Forge module with per-version build configuration, a Forge client entry point, configuration screen integration, and player-data compatibility overrides. - Updated shared client, effect, and network mixin code for the mappings and APIs used by the Forge versions. - Added a dedicated 1.21.11 target for Fabric, Quilt, and NeoForge, plus NeoForge targets for 1.21.10 and 1.21.11. - Updated Cloth Config and Mod Menu dependency resolution for Fabric and Quilt 1.21.11 and 26.3 builds. Quilt 26.1 and newer now declares the required Quilt Loader version range. - Updated OpenRGB protocol handling to read controller IDs from protocol 6 responses, use those IDs for device requests and lighting updates, and negotiate protocol 5 for compatibility. - Set the Fabric lighting thread as a daemon so it does not keep the client running during shutdown.

# MineLights 2.3.8.3 This release adds native Forge support and expands version support across the loaders. It also fixes compatibility with OpenRGB 1.0. Previous server version compatible (as of 2.3.1)! ## Key Features & Major Changes - Added native Forge support from Minecraft 1.17.1 to 26.3 for every Minecraft version with an official Forge release. - Expanded Minecraft version support for Fabric, Quilt, and NeoForge. - Fixed OpenRGB 1.0 compatibility so MineLights discovers devices. ## Installation / Upgrade Instructions - DELETE your old mine-lights-\*.jar file completely. - Download the jar from this release. - Place the new minelights-\*.jar into your mods folder. - Install Cloth Config, here: [https://modrinth.com/mod/cloth-config](https://modrinth.com/mod/cloth-config) - **OpenRGB (optional):** The latest OpenRGB version is recommended. After installing or updating OpenRGB, restart your computer before using MineLights. Start OpenRGB, open the **SDK Server** tab, and click **Start Server**. Keep OpenRGB running while Minecraft is open. MineLights connects to the local server at `127.0.0.1:6742` (the default SDK server address and port). - Run Minecraft. - Using anything which is not OpenRGB? 1. Start Minecraft. 2. Wait for MineLights.exe to finish downloading in the background. 3. If all goes well, you will see a dialog asking you if you want to grant `MineLights.exe` permission to access the internet. 4. After accepting, your supported devices will show red. ## Full Changelog & Technical Details - Updated the loader target matrix to Fabric 1.14.3-26.3, Quilt 1.14.4-26.3, Forge 1.17.1-26.3, and NeoForge 1.20.2-26.3. Forge targets skip Minecraft versions without an official Forge release. - Added a dedicated Forge module with per-version build configuration, a Forge client entry point, configuration screen integration, and player-data compatibility overrides. - Updated shared client, effect, and network mixin code for the mappings and APIs used by the Forge versions. - Added a dedicated 1.21.11 target for Fabric, Quilt, and NeoForge, plus NeoForge targets for 1.21.10 and 1.21.11. - Updated Cloth Config and Mod Menu dependency resolution for Fabric and Quilt 1.21.11 and 26.3 builds. Quilt 26.1 and newer now declares the required Quilt Loader version range. - Updated OpenRGB protocol handling to read controller IDs from protocol 6 responses, use those IDs for device requests and lighting updates, and negotiate protocol 5 for compatibility. - Set the Fabric lighting thread as a daemon so it does not keep the client running during shutdown.

# MineLights 2.3.8.3 This release adds native Forge support and expands version support across the loaders. It also fixes compatibility with OpenRGB 1.0. Previous server version compatible (as of 2.3.1)! ## Key Features & Major Changes - Added native Forge support from Minecraft 1.17.1 to 26.3 for every Minecraft version with an official Forge release. - Expanded Minecraft version support for Fabric, Quilt, and NeoForge. - Fixed OpenRGB 1.0 compatibility so MineLights discovers devices. ## Installation / Upgrade Instructions - DELETE your old mine-lights-\*.jar file completely. - Download the jar from this release. - Place the new minelights-\*.jar into your mods folder. - Install Cloth Config, here: [https://modrinth.com/mod/cloth-config](https://modrinth.com/mod/cloth-config) - **OpenRGB (optional):** The latest OpenRGB version is recommended. After installing or updating OpenRGB, restart your computer before using MineLights. Start OpenRGB, open the **SDK Server** tab, and click **Start Server**. Keep OpenRGB running while Minecraft is open. MineLights connects to the local server at `127.0.0.1:6742` (the default SDK server address and port). - Run Minecraft. - Using anything which is not OpenRGB? 1. Start Minecraft. 2. Wait for MineLights.exe to finish downloading in the background. 3. If all goes well, you will see a dialog asking you if you want to grant `MineLights.exe` permission to access the internet. 4. After accepting, your supported devices will show red. ## Full Changelog & Technical Details - Updated the loader target matrix to Fabric 1.14.3-26.3, Quilt 1.14.4-26.3, Forge 1.17.1-26.3, and NeoForge 1.20.2-26.3. Forge targets skip Minecraft versions without an official Forge release. - Added a dedicated Forge module with per-version build configuration, a Forge client entry point, configuration screen integration, and player-data compatibility overrides. - Updated shared client, effect, and network mixin code for the mappings and APIs used by the Forge versions. - Added a dedicated 1.21.11 target for Fabric, Quilt, and NeoForge, plus NeoForge targets for 1.21.10 and 1.21.11. - Updated Cloth Config and Mod Menu dependency resolution for Fabric and Quilt 1.21.11 and 26.3 builds. Quilt 26.1 and newer now declares the required Quilt Loader version range. - Updated OpenRGB protocol handling to read controller IDs from protocol 6 responses, use those IDs for device requests and lighting updates, and negotiate protocol 5 for compatibility. - Set the Fabric lighting thread as a daemon so it does not keep the client running during shutdown.

# MineLights 2.3.8.3 This release adds native Forge support and expands version support across the loaders. It also fixes compatibility with OpenRGB 1.0. Previous server version compatible (as of 2.3.1)! ## Key Features & Major Changes - Added native Forge support from Minecraft 1.17.1 to 26.3 for every Minecraft version with an official Forge release. - Expanded Minecraft version support for Fabric, Quilt, and NeoForge. - Fixed OpenRGB 1.0 compatibility so MineLights discovers devices. ## Installation / Upgrade Instructions - DELETE your old mine-lights-\*.jar file completely. - Download the jar from this release. - Place the new minelights-\*.jar into your mods folder. - Install Cloth Config, here: [https://modrinth.com/mod/cloth-config](https://modrinth.com/mod/cloth-config) - **OpenRGB (optional):** The latest OpenRGB version is recommended. After installing or updating OpenRGB, restart your computer before using MineLights. Start OpenRGB, open the **SDK Server** tab, and click **Start Server**. Keep OpenRGB running while Minecraft is open. MineLights connects to the local server at `127.0.0.1:6742` (the default SDK server address and port). - Run Minecraft. - Using anything which is not OpenRGB? 1. Start Minecraft. 2. Wait for MineLights.exe to finish downloading in the background. 3. If all goes well, you will see a dialog asking you if you want to grant `MineLights.exe` permission to access the internet. 4. After accepting, your supported devices will show red. ## Full Changelog & Technical Details - Updated the loader target matrix to Fabric 1.14.3-26.3, Quilt 1.14.4-26.3, Forge 1.17.1-26.3, and NeoForge 1.20.2-26.3. Forge targets skip Minecraft versions without an official Forge release. - Added a dedicated Forge module with per-version build configuration, a Forge client entry point, configuration screen integration, and player-data compatibility overrides. - Updated shared client, effect, and network mixin code for the mappings and APIs used by the Forge versions. - Added a dedicated 1.21.11 target for Fabric, Quilt, and NeoForge, plus NeoForge targets for 1.21.10 and 1.21.11. - Updated Cloth Config and Mod Menu dependency resolution for Fabric and Quilt 1.21.11 and 26.3 builds. Quilt 26.1 and newer now declares the required Quilt Loader version range. - Updated OpenRGB protocol handling to read controller IDs from protocol 6 responses, use those IDs for device requests and lighting updates, and negotiate protocol 5 for compatibility. - Set the Fabric lighting thread as a daemon so it does not keep the client running during shutdown.

# MineLights 2.3.8.3 This release adds native Forge support and expands version support across the loaders. It also fixes compatibility with OpenRGB 1.0. Previous server version compatible (as of 2.3.1)! ## Key Features & Major Changes - Added native Forge support from Minecraft 1.17.1 to 26.3 for every Minecraft version with an official Forge release. - Expanded Minecraft version support for Fabric, Quilt, and NeoForge. - Fixed OpenRGB 1.0 compatibility so MineLights discovers devices. ## Installation / Upgrade Instructions - DELETE your old mine-lights-\*.jar file completely. - Download the jar from this release. - Place the new minelights-\*.jar into your mods folder. - Install Cloth Config, here: [https://modrinth.com/mod/cloth-config](https://modrinth.com/mod/cloth-config) - **OpenRGB (optional):** The latest OpenRGB version is recommended. After installing or updating OpenRGB, restart your computer before using MineLights. Start OpenRGB, open the **SDK Server** tab, and click **Start Server**. Keep OpenRGB running while Minecraft is open. MineLights connects to the local server at `127.0.0.1:6742` (the default SDK server address and port). - Run Minecraft. - Using anything which is not OpenRGB? 1. Start Minecraft. 2. Wait for MineLights.exe to finish downloading in the background. 3. If all goes well, you will see a dialog asking you if you want to grant `MineLights.exe` permission to access the internet. 4. After accepting, your supported devices will show red. ## Full Changelog & Technical Details - Updated the loader target matrix to Fabric 1.14.3-26.3, Quilt 1.14.4-26.3, Forge 1.17.1-26.3, and NeoForge 1.20.2-26.3. Forge targets skip Minecraft versions without an official Forge release. - Added a dedicated Forge module with per-version build configuration, a Forge client entry point, configuration screen integration, and player-data compatibility overrides. - Updated shared client, effect, and network mixin code for the mappings and APIs used by the Forge versions. - Added a dedicated 1.21.11 target for Fabric, Quilt, and NeoForge, plus NeoForge targets for 1.21.10 and 1.21.11. - Updated Cloth Config and Mod Menu dependency resolution for Fabric and Quilt 1.21.11 and 26.3 builds. Quilt 26.1 and newer now declares the required Quilt Loader version range. - Updated OpenRGB protocol handling to read controller IDs from protocol 6 responses, use those IDs for device requests and lighting updates, and negotiate protocol 5 for compatibility. - Set the Fabric lighting thread as a daemon so it does not keep the client running during shutdown.

# MineLights 2.3.8.3 This release adds native Forge support and expands version support across the loaders. It also fixes compatibility with OpenRGB 1.0. Previous server version compatible (as of 2.3.1)! ## Key Features & Major Changes - Added native Forge support from Minecraft 1.17.1 to 26.3 for every Minecraft version with an official Forge release. - Expanded Minecraft version support for Fabric, Quilt, and NeoForge. - Fixed OpenRGB 1.0 compatibility so MineLights discovers devices. ## Installation / Upgrade Instructions - DELETE your old mine-lights-\*.jar file completely. - Download the jar from this release. - Place the new minelights-\*.jar into your mods folder. - Install Cloth Config, here: [https://modrinth.com/mod/cloth-config](https://modrinth.com/mod/cloth-config) - **OpenRGB (optional):** The latest OpenRGB version is recommended. After installing or updating OpenRGB, restart your computer before using MineLights. Start OpenRGB, open the **SDK Server** tab, and click **Start Server**. Keep OpenRGB running while Minecraft is open. MineLights connects to the local server at `127.0.0.1:6742` (the default SDK server address and port). - Run Minecraft. - Using anything which is not OpenRGB? 1. Start Minecraft. 2. Wait for MineLights.exe to finish downloading in the background. 3. If all goes well, you will see a dialog asking you if you want to grant `MineLights.exe` permission to access the internet. 4. After accepting, your supported devices will show red. ## Full Changelog & Technical Details - Updated the loader target matrix to Fabric 1.14.3-26.3, Quilt 1.14.4-26.3, Forge 1.17.1-26.3, and NeoForge 1.20.2-26.3. Forge targets skip Minecraft versions without an official Forge release. - Added a dedicated Forge module with per-version build configuration, a Forge client entry point, configuration screen integration, and player-data compatibility overrides. - Updated shared client, effect, and network mixin code for the mappings and APIs used by the Forge versions. - Added a dedicated 1.21.11 target for Fabric, Quilt, and NeoForge, plus NeoForge targets for 1.21.10 and 1.21.11. - Updated Cloth Config and Mod Menu dependency resolution for Fabric and Quilt 1.21.11 and 26.3 builds. Quilt 26.1 and newer now declares the required Quilt Loader version range. - Updated OpenRGB protocol handling to read controller IDs from protocol 6 responses, use those IDs for device requests and lighting updates, and negotiate protocol 5 for compatibility. - Set the Fabric lighting thread as a daemon so it does not keep the client running during shutdown.

# MineLights 2.3.8.3 This release adds native Forge support and expands version support across the loaders. It also fixes compatibility with OpenRGB 1.0. Previous server version compatible (as of 2.3.1)! ## Key Features & Major Changes - Added native Forge support from Minecraft 1.17.1 to 26.3 for every Minecraft version with an official Forge release. - Expanded Minecraft version support for Fabric, Quilt, and NeoForge. - Fixed OpenRGB 1.0 compatibility so MineLights discovers devices. ## Installation / Upgrade Instructions - DELETE your old mine-lights-\*.jar file completely. - Download the jar from this release. - Place the new minelights-\*.jar into your mods folder. - Install Cloth Config, here: [https://modrinth.com/mod/cloth-config](https://modrinth.com/mod/cloth-config) - **OpenRGB (optional):** The latest OpenRGB version is recommended. After installing or updating OpenRGB, restart your computer before using MineLights. Start OpenRGB, open the **SDK Server** tab, and click **Start Server**. Keep OpenRGB running while Minecraft is open. MineLights connects to the local server at `127.0.0.1:6742` (the default SDK server address and port). - Run Minecraft. - Using anything which is not OpenRGB? 1. Start Minecraft. 2. Wait for MineLights.exe to finish downloading in the background. 3. If all goes well, you will see a dialog asking you if you want to grant `MineLights.exe` permission to access the internet. 4. After accepting, your supported devices will show red. ## Full Changelog & Technical Details - Updated the loader target matrix to Fabric 1.14.3-26.3, Quilt 1.14.4-26.3, Forge 1.17.1-26.3, and NeoForge 1.20.2-26.3. Forge targets skip Minecraft versions without an official Forge release. - Added a dedicated Forge module with per-version build configuration, a Forge client entry point, configuration screen integration, and player-data compatibility overrides. - Updated shared client, effect, and network mixin code for the mappings and APIs used by the Forge versions. - Added a dedicated 1.21.11 target for Fabric, Quilt, and NeoForge, plus NeoForge targets for 1.21.10 and 1.21.11. - Updated Cloth Config and Mod Menu dependency resolution for Fabric and Quilt 1.21.11 and 26.3 builds. Quilt 26.1 and newer now declares the required Quilt Loader version range. - Updated OpenRGB protocol handling to read controller IDs from protocol 6 responses, use those IDs for device requests and lighting updates, and negotiate protocol 5 for compatibility. - Set the Fabric lighting thread as a daemon so it does not keep the client running during shutdown.

# MineLights 2.3.8.3 This release adds native Forge support and expands version support across the loaders. It also fixes compatibility with OpenRGB 1.0. Previous server version compatible (as of 2.3.1)! ## Key Features & Major Changes - Added native Forge support from Minecraft 1.17.1 to 26.3 for every Minecraft version with an official Forge release. - Expanded Minecraft version support for Fabric, Quilt, and NeoForge. - Fixed OpenRGB 1.0 compatibility so MineLights discovers devices. ## Installation / Upgrade Instructions - DELETE your old mine-lights-\*.jar file completely. - Download the jar from this release. - Place the new minelights-\*.jar into your mods folder. - Install Cloth Config, here: [https://modrinth.com/mod/cloth-config](https://modrinth.com/mod/cloth-config) - **OpenRGB (optional):** The latest OpenRGB version is recommended. After installing or updating OpenRGB, restart your computer before using MineLights. Start OpenRGB, open the **SDK Server** tab, and click **Start Server**. Keep OpenRGB running while Minecraft is open. MineLights connects to the local server at `127.0.0.1:6742` (the default SDK server address and port). - Run Minecraft. - Using anything which is not OpenRGB? 1. Start Minecraft. 2. Wait for MineLights.exe to finish downloading in the background. 3. If all goes well, you will see a dialog asking you if you want to grant `MineLights.exe` permission to access the internet. 4. After accepting, your supported devices will show red. ## Full Changelog & Technical Details - Updated the loader target matrix to Fabric 1.14.3-26.3, Quilt 1.14.4-26.3, Forge 1.17.1-26.3, and NeoForge 1.20.2-26.3. Forge targets skip Minecraft versions without an official Forge release. - Added a dedicated Forge module with per-version build configuration, a Forge client entry point, configuration screen integration, and player-data compatibility overrides. - Updated shared client, effect, and network mixin code for the mappings and APIs used by the Forge versions. - Added a dedicated 1.21.11 target for Fabric, Quilt, and NeoForge, plus NeoForge targets for 1.21.10 and 1.21.11. - Updated Cloth Config and Mod Menu dependency resolution for Fabric and Quilt 1.21.11 and 26.3 builds. Quilt 26.1 and newer now declares the required Quilt Loader version range. - Updated OpenRGB protocol handling to read controller IDs from protocol 6 responses, use those IDs for device requests and lighting updates, and negotiate protocol 5 for compatibility. - Set the Fabric lighting thread as a daemon so it does not keep the client running during shutdown.

# MineLights 2.3.8.3 This release adds native Forge support and expands version support across the loaders. It also fixes compatibility with OpenRGB 1.0. Previous server version compatible (as of 2.3.1)! ## Key Features & Major Changes - Added native Forge support from Minecraft 1.17.1 to 26.3 for every Minecraft version with an official Forge release. - Expanded Minecraft version support for Fabric, Quilt, and NeoForge. - Fixed OpenRGB 1.0 compatibility so MineLights discovers devices. ## Installation / Upgrade Instructions - DELETE your old mine-lights-\*.jar file completely. - Download the jar from this release. - Place the new minelights-\*.jar into your mods folder. - Install Cloth Config, here: [https://modrinth.com/mod/cloth-config](https://modrinth.com/mod/cloth-config) - **OpenRGB (optional):** The latest OpenRGB version is recommended. After installing or updating OpenRGB, restart your computer before using MineLights. Start OpenRGB, open the **SDK Server** tab, and click **Start Server**. Keep OpenRGB running while Minecraft is open. MineLights connects to the local server at `127.0.0.1:6742` (the default SDK server address and port). - Run Minecraft. - Using anything which is not OpenRGB? 1. Start Minecraft. 2. Wait for MineLights.exe to finish downloading in the background. 3. If all goes well, you will see a dialog asking you if you want to grant `MineLights.exe` permission to access the internet. 4. After accepting, your supported devices will show red. ## Full Changelog & Technical Details - Updated the loader target matrix to Fabric 1.14.3-26.3, Quilt 1.14.4-26.3, Forge 1.17.1-26.3, and NeoForge 1.20.2-26.3. Forge targets skip Minecraft versions without an official Forge release. - Added a dedicated Forge module with per-version build configuration, a Forge client entry point, configuration screen integration, and player-data compatibility overrides. - Updated shared client, effect, and network mixin code for the mappings and APIs used by the Forge versions. - Added a dedicated 1.21.11 target for Fabric, Quilt, and NeoForge, plus NeoForge targets for 1.21.10 and 1.21.11. - Updated Cloth Config and Mod Menu dependency resolution for Fabric and Quilt 1.21.11 and 26.3 builds. Quilt 26.1 and newer now declares the required Quilt Loader version range. - Updated OpenRGB protocol handling to read controller IDs from protocol 6 responses, use those IDs for device requests and lighting updates, and negotiate protocol 5 for compatibility. - Set the Fabric lighting thread as a daemon so it does not keep the client running during shutdown.

# MineLights 2.3.8.3 This release adds native Forge support and expands version support across the loaders. It also fixes compatibility with OpenRGB 1.0. Previous server version compatible (as of 2.3.1)! ## Key Features & Major Changes - Added native Forge support from Minecraft 1.17.1 to 26.3 for every Minecraft version with an official Forge release. - Expanded Minecraft version support for Fabric, Quilt, and NeoForge. - Fixed OpenRGB 1.0 compatibility so MineLights discovers devices. ## Installation / Upgrade Instructions - DELETE your old mine-lights-\*.jar file completely. - Download the jar from this release. - Place the new minelights-\*.jar into your mods folder. - Install Cloth Config, here: [https://modrinth.com/mod/cloth-config](https://modrinth.com/mod/cloth-config) - **OpenRGB (optional):** The latest OpenRGB version is recommended. After installing or updating OpenRGB, restart your computer before using MineLights. Start OpenRGB, open the **SDK Server** tab, and click **Start Server**. Keep OpenRGB running while Minecraft is open. MineLights connects to the local server at `127.0.0.1:6742` (the default SDK server address and port). - Run Minecraft. - Using anything which is not OpenRGB? 1. Start Minecraft. 2. Wait for MineLights.exe to finish downloading in the background. 3. If all goes well, you will see a dialog asking you if you want to grant `MineLights.exe` permission to access the internet. 4. After accepting, your supported devices will show red. ## Full Changelog & Technical Details - Updated the loader target matrix to Fabric 1.14.3-26.3, Quilt 1.14.4-26.3, Forge 1.17.1-26.3, and NeoForge 1.20.2-26.3. Forge targets skip Minecraft versions without an official Forge release. - Added a dedicated Forge module with per-version build configuration, a Forge client entry point, configuration screen integration, and player-data compatibility overrides. - Updated shared client, effect, and network mixin code for the mappings and APIs used by the Forge versions. - Added a dedicated 1.21.11 target for Fabric, Quilt, and NeoForge, plus NeoForge targets for 1.21.10 and 1.21.11. - Updated Cloth Config and Mod Menu dependency resolution for Fabric and Quilt 1.21.11 and 26.3 builds. Quilt 26.1 and newer now declares the required Quilt Loader version range. - Updated OpenRGB protocol handling to read controller IDs from protocol 6 responses, use those IDs for device requests and lighting updates, and negotiate protocol 5 for compatibility. - Set the Fabric lighting thread as a daemon so it does not keep the client running during shutdown.

# MineLights 2.3.8.3 This release adds native Forge support and expands version support across the loaders. It also fixes compatibility with OpenRGB 1.0. Previous server version compatible (as of 2.3.1)! ## Key Features & Major Changes - Added native Forge support from Minecraft 1.17.1 to 26.3 for every Minecraft version with an official Forge release. - Expanded Minecraft version support for Fabric, Quilt, and NeoForge. - Fixed OpenRGB 1.0 compatibility so MineLights discovers devices. ## Installation / Upgrade Instructions - DELETE your old mine-lights-\*.jar file completely. - Download the jar from this release. - Place the new minelights-\*.jar into your mods folder. - Install Cloth Config, here: [https://modrinth.com/mod/cloth-config](https://modrinth.com/mod/cloth-config) - **OpenRGB (optional):** The latest OpenRGB version is recommended. After installing or updating OpenRGB, restart your computer before using MineLights. Start OpenRGB, open the **SDK Server** tab, and click **Start Server**. Keep OpenRGB running while Minecraft is open. MineLights connects to the local server at `127.0.0.1:6742` (the default SDK server address and port). - Run Minecraft. - Using anything which is not OpenRGB? 1. Start Minecraft. 2. Wait for MineLights.exe to finish downloading in the background. 3. If all goes well, you will see a dialog asking you if you want to grant `MineLights.exe` permission to access the internet. 4. After accepting, your supported devices will show red. ## Full Changelog & Technical Details - Updated the loader target matrix to Fabric 1.14.3-26.3, Quilt 1.14.4-26.3, Forge 1.17.1-26.3, and NeoForge 1.20.2-26.3. Forge targets skip Minecraft versions without an official Forge release. - Added a dedicated Forge module with per-version build configuration, a Forge client entry point, configuration screen integration, and player-data compatibility overrides. - Updated shared client, effect, and network mixin code for the mappings and APIs used by the Forge versions. - Added a dedicated 1.21.11 target for Fabric, Quilt, and NeoForge, plus NeoForge targets for 1.21.10 and 1.21.11. - Updated Cloth Config and Mod Menu dependency resolution for Fabric and Quilt 1.21.11 and 26.3 builds. Quilt 26.1 and newer now declares the required Quilt Loader version range. - Updated OpenRGB protocol handling to read controller IDs from protocol 6 responses, use those IDs for device requests and lighting updates, and negotiate protocol 5 for compatibility. - Set the Fabric lighting thread as a daemon so it does not keep the client running during shutdown.

# MineLights 2.3.8.3 This release adds native Forge support and expands version support across the loaders. It also fixes compatibility with OpenRGB 1.0. Previous server version compatible (as of 2.3.1)! ## Key Features & Major Changes - Added native Forge support from Minecraft 1.17.1 to 26.3 for every Minecraft version with an official Forge release. - Expanded Minecraft version support for Fabric, Quilt, and NeoForge. - Fixed OpenRGB 1.0 compatibility so MineLights discovers devices. ## Installation / Upgrade Instructions - DELETE your old mine-lights-\*.jar file completely. - Download the jar from this release. - Place the new minelights-\*.jar into your mods folder. - Install Cloth Config, here: [https://modrinth.com/mod/cloth-config](https://modrinth.com/mod/cloth-config) - **OpenRGB (optional):** The latest OpenRGB version is recommended. After installing or updating OpenRGB, restart your computer before using MineLights. Start OpenRGB, open the **SDK Server** tab, and click **Start Server**. Keep OpenRGB running while Minecraft is open. MineLights connects to the local server at `127.0.0.1:6742` (the default SDK server address and port). - Run Minecraft. - Using anything which is not OpenRGB? 1. Start Minecraft. 2. Wait for MineLights.exe to finish downloading in the background. 3. If all goes well, you will see a dialog asking you if you want to grant `MineLights.exe` permission to access the internet. 4. After accepting, your supported devices will show red. ## Full Changelog & Technical Details - Updated the loader target matrix to Fabric 1.14.3-26.3, Quilt 1.14.4-26.3, Forge 1.17.1-26.3, and NeoForge 1.20.2-26.3. Forge targets skip Minecraft versions without an official Forge release. - Added a dedicated Forge module with per-version build configuration, a Forge client entry point, configuration screen integration, and player-data compatibility overrides. - Updated shared client, effect, and network mixin code for the mappings and APIs used by the Forge versions. - Added a dedicated 1.21.11 target for Fabric, Quilt, and NeoForge, plus NeoForge targets for 1.21.10 and 1.21.11. - Updated Cloth Config and Mod Menu dependency resolution for Fabric and Quilt 1.21.11 and 26.3 builds. Quilt 26.1 and newer now declares the required Quilt Loader version range. - Updated OpenRGB protocol handling to read controller IDs from protocol 6 responses, use those IDs for device requests and lighting updates, and negotiate protocol 5 for compatibility. - Set the Fabric lighting thread as a daemon so it does not keep the client running during shutdown.

# MineLights 2.3.8.3 This release adds native Forge support and expands version support across the loaders. It also fixes compatibility with OpenRGB 1.0. Previous server version compatible (as of 2.3.1)! ## Key Features & Major Changes - Added native Forge support from Minecraft 1.17.1 to 26.3 for every Minecraft version with an official Forge release. - Expanded Minecraft version support for Fabric, Quilt, and NeoForge. - Fixed OpenRGB 1.0 compatibility so MineLights discovers devices. ## Installation / Upgrade Instructions - DELETE your old mine-lights-\*.jar file completely. - Download the jar from this release. - Place the new minelights-\*.jar into your mods folder. - Install Cloth Config, here: [https://modrinth.com/mod/cloth-config](https://modrinth.com/mod/cloth-config) - **OpenRGB (optional):** The latest OpenRGB version is recommended. After installing or updating OpenRGB, restart your computer before using MineLights. Start OpenRGB, open the **SDK Server** tab, and click **Start Server**. Keep OpenRGB running while Minecraft is open. MineLights connects to the local server at `127.0.0.1:6742` (the default SDK server address and port). - Run Minecraft. - Using anything which is not OpenRGB? 1. Start Minecraft. 2. Wait for MineLights.exe to finish downloading in the background. 3. If all goes well, you will see a dialog asking you if you want to grant `MineLights.exe` permission to access the internet. 4. After accepting, your supported devices will show red. ## Full Changelog & Technical Details - Updated the loader target matrix to Fabric 1.14.3-26.3, Quilt 1.14.4-26.3, Forge 1.17.1-26.3, and NeoForge 1.20.2-26.3. Forge targets skip Minecraft versions without an official Forge release. - Added a dedicated Forge module with per-version build configuration, a Forge client entry point, configuration screen integration, and player-data compatibility overrides. - Updated shared client, effect, and network mixin code for the mappings and APIs used by the Forge versions. - Added a dedicated 1.21.11 target for Fabric, Quilt, and NeoForge, plus NeoForge targets for 1.21.10 and 1.21.11. - Updated Cloth Config and Mod Menu dependency resolution for Fabric and Quilt 1.21.11 and 26.3 builds. Quilt 26.1 and newer now declares the required Quilt Loader version range. - Updated OpenRGB protocol handling to read controller IDs from protocol 6 responses, use those IDs for device requests and lighting updates, and negotiate protocol 5 for compatibility. - Set the Fabric lighting thread as a daemon so it does not keep the client running during shutdown.

# MineLights 2.3.8.3 This release adds native Forge support and expands version support across the loaders. It also fixes compatibility with OpenRGB 1.0. Previous server version compatible (as of 2.3.1)! ## Key Features & Major Changes - Added native Forge support from Minecraft 1.17.1 to 26.3 for every Minecraft version with an official Forge release. - Expanded Minecraft version support for Fabric, Quilt, and NeoForge. - Fixed OpenRGB 1.0 compatibility so MineLights discovers devices. ## Installation / Upgrade Instructions - DELETE your old mine-lights-\*.jar file completely. - Download the jar from this release. - Place the new minelights-\*.jar into your mods folder. - Install Cloth Config, here: [https://modrinth.com/mod/cloth-config](https://modrinth.com/mod/cloth-config) - **OpenRGB (optional):** The latest OpenRGB version is recommended. After installing or updating OpenRGB, restart your computer before using MineLights. Start OpenRGB, open the **SDK Server** tab, and click **Start Server**. Keep OpenRGB running while Minecraft is open. MineLights connects to the local server at `127.0.0.1:6742` (the default SDK server address and port). - Run Minecraft. - Using anything which is not OpenRGB? 1. Start Minecraft. 2. Wait for MineLights.exe to finish downloading in the background. 3. If all goes well, you will see a dialog asking you if you want to grant `MineLights.exe` permission to access the internet. 4. After accepting, your supported devices will show red. ## Full Changelog & Technical Details - Updated the loader target matrix to Fabric 1.14.3-26.3, Quilt 1.14.4-26.3, Forge 1.17.1-26.3, and NeoForge 1.20.2-26.3. Forge targets skip Minecraft versions without an official Forge release. - Added a dedicated Forge module with per-version build configuration, a Forge client entry point, configuration screen integration, and player-data compatibility overrides. - Updated shared client, effect, and network mixin code for the mappings and APIs used by the Forge versions. - Added a dedicated 1.21.11 target for Fabric, Quilt, and NeoForge, plus NeoForge targets for 1.21.10 and 1.21.11. - Updated Cloth Config and Mod Menu dependency resolution for Fabric and Quilt 1.21.11 and 26.3 builds. Quilt 26.1 and newer now declares the required Quilt Loader version range. - Updated OpenRGB protocol handling to read controller IDs from protocol 6 responses, use those IDs for device requests and lighting updates, and negotiate protocol 5 for compatibility. - Set the Fabric lighting thread as a daemon so it does not keep the client running during shutdown.

# MineLights 2.3.8.3 This release adds native Forge support and expands version support across the loaders. It also fixes compatibility with OpenRGB 1.0. Previous server version compatible (as of 2.3.1)! ## Key Features & Major Changes - Added native Forge support from Minecraft 1.17.1 to 26.3 for every Minecraft version with an official Forge release. - Expanded Minecraft version support for Fabric, Quilt, and NeoForge. - Fixed OpenRGB 1.0 compatibility so MineLights discovers devices. ## Installation / Upgrade Instructions - DELETE your old mine-lights-\*.jar file completely. - Download the jar from this release. - Place the new minelights-\*.jar into your mods folder. - Install Cloth Config, here: [https://modrinth.com/mod/cloth-config](https://modrinth.com/mod/cloth-config) - **OpenRGB (optional):** The latest OpenRGB version is recommended. After installing or updating OpenRGB, restart your computer before using MineLights. Start OpenRGB, open the **SDK Server** tab, and click **Start Server**. Keep OpenRGB running while Minecraft is open. MineLights connects to the local server at `127.0.0.1:6742` (the default SDK server address and port). - Run Minecraft. - Using anything which is not OpenRGB? 1. Start Minecraft. 2. Wait for MineLights.exe to finish downloading in the background. 3. If all goes well, you will see a dialog asking you if you want to grant `MineLights.exe` permission to access the internet. 4. After accepting, your supported devices will show red. ## Full Changelog & Technical Details - Updated the loader target matrix to Fabric 1.14.3-26.3, Quilt 1.14.4-26.3, Forge 1.17.1-26.3, and NeoForge 1.20.2-26.3. Forge targets skip Minecraft versions without an official Forge release. - Added a dedicated Forge module with per-version build configuration, a Forge client entry point, configuration screen integration, and player-data compatibility overrides. - Updated shared client, effect, and network mixin code for the mappings and APIs used by the Forge versions. - Added a dedicated 1.21.11 target for Fabric, Quilt, and NeoForge, plus NeoForge targets for 1.21.10 and 1.21.11. - Updated Cloth Config and Mod Menu dependency resolution for Fabric and Quilt 1.21.11 and 26.3 builds. Quilt 26.1 and newer now declares the required Quilt Loader version range. - Updated OpenRGB protocol handling to read controller IDs from protocol 6 responses, use those IDs for device requests and lighting updates, and negotiate protocol 5 for compatibility. - Set the Fabric lighting thread as a daemon so it does not keep the client running during shutdown.

# MineLights 2.3.8.3 This release adds native Forge support and expands version support across the loaders. It also fixes compatibility with OpenRGB 1.0. Previous server version compatible (as of 2.3.1)! ## Key Features & Major Changes - Added native Forge support from Minecraft 1.17.1 to 26.3 for every Minecraft version with an official Forge release. - Expanded Minecraft version support for Fabric, Quilt, and NeoForge. - Fixed OpenRGB 1.0 compatibility so MineLights discovers devices. ## Installation / Upgrade Instructions - DELETE your old mine-lights-\*.jar file completely. - Download the jar from this release. - Place the new minelights-\*.jar into your mods folder. - Install Cloth Config, here: [https://modrinth.com/mod/cloth-config](https://modrinth.com/mod/cloth-config) - **OpenRGB (optional):** The latest OpenRGB version is recommended. After installing or updating OpenRGB, restart your computer before using MineLights. Start OpenRGB, open the **SDK Server** tab, and click **Start Server**. Keep OpenRGB running while Minecraft is open. MineLights connects to the local server at `127.0.0.1:6742` (the default SDK server address and port). - Run Minecraft. - Using anything which is not OpenRGB? 1. Start Minecraft. 2. Wait for MineLights.exe to finish downloading in the background. 3. If all goes well, you will see a dialog asking you if you want to grant `MineLights.exe` permission to access the internet. 4. After accepting, your supported devices will show red. ## Full Changelog & Technical Details - Updated the loader target matrix to Fabric 1.14.3-26.3, Quilt 1.14.4-26.3, Forge 1.17.1-26.3, and NeoForge 1.20.2-26.3. Forge targets skip Minecraft versions without an official Forge release. - Added a dedicated Forge module with per-version build configuration, a Forge client entry point, configuration screen integration, and player-data compatibility overrides. - Updated shared client, effect, and network mixin code for the mappings and APIs used by the Forge versions. - Added a dedicated 1.21.11 target for Fabric, Quilt, and NeoForge, plus NeoForge targets for 1.21.10 and 1.21.11. - Updated Cloth Config and Mod Menu dependency resolution for Fabric and Quilt 1.21.11 and 26.3 builds. Quilt 26.1 and newer now declares the required Quilt Loader version range. - Updated OpenRGB protocol handling to read controller IDs from protocol 6 responses, use those IDs for device requests and lighting updates, and negotiate protocol 5 for compatibility. - Set the Fabric lighting thread as a daemon so it does not keep the client running during shutdown.

# MineLights 2.3.8.3 This release adds native Forge support and expands version support across the loaders. It also fixes compatibility with OpenRGB 1.0. Previous server version compatible (as of 2.3.1)! ## Key Features & Major Changes - Added native Forge support from Minecraft 1.17.1 to 26.3 for every Minecraft version with an official Forge release. - Expanded Minecraft version support for Fabric, Quilt, and NeoForge. - Fixed OpenRGB 1.0 compatibility so MineLights discovers devices. ## Installation / Upgrade Instructions - DELETE your old mine-lights-\*.jar file completely. - Download the jar from this release. - Place the new minelights-\*.jar into your mods folder. - Install Cloth Config, here: [https://modrinth.com/mod/cloth-config](https://modrinth.com/mod/cloth-config) - **OpenRGB (optional):** The latest OpenRGB version is recommended. After installing or updating OpenRGB, restart your computer before using MineLights. Start OpenRGB, open the **SDK Server** tab, and click **Start Server**. Keep OpenRGB running while Minecraft is open. MineLights connects to the local server at `127.0.0.1:6742` (the default SDK server address and port). - Run Minecraft. - Using anything which is not OpenRGB? 1. Start Minecraft. 2. Wait for MineLights.exe to finish downloading in the background. 3. If all goes well, you will see a dialog asking you if you want to grant `MineLights.exe` permission to access the internet. 4. After accepting, your supported devices will show red. ## Full Changelog & Technical Details - Updated the loader target matrix to Fabric 1.14.3-26.3, Quilt 1.14.4-26.3, Forge 1.17.1-26.3, and NeoForge 1.20.2-26.3. Forge targets skip Minecraft versions without an official Forge release. - Added a dedicated Forge module with per-version build configuration, a Forge client entry point, configuration screen integration, and player-data compatibility overrides. - Updated shared client, effect, and network mixin code for the mappings and APIs used by the Forge versions. - Added a dedicated 1.21.11 target for Fabric, Quilt, and NeoForge, plus NeoForge targets for 1.21.10 and 1.21.11. - Updated Cloth Config and Mod Menu dependency resolution for Fabric and Quilt 1.21.11 and 26.3 builds. Quilt 26.1 and newer now declares the required Quilt Loader version range. - Updated OpenRGB protocol handling to read controller IDs from protocol 6 responses, use those IDs for device requests and lighting updates, and negotiate protocol 5 for compatibility. - Set the Fabric lighting thread as a daemon so it does not keep the client running during shutdown.

# MineLights 2.3.8.2 This release adds native Quilt support and removes loader-specific wording from the MineLights descriptions. Previous server version compatible (as of 2.3.1)! ## Key Features & Major Changes - Updated the About description across all translations to describe MineLights as a Minecraft mod. - Updated Fabric, Quilt, and NeoForge metadata descriptions to use the same loader-neutral wording. - Added native Quilt builds from Minecraft 1.14.4 through 26.3 without a Fabric API or Quilt API library dependency. ## Installation / Upgrade Instructions - DELETE your old mine-lights-\*.jar file completely. - Download the jar from this release. - Place the new minelights-\*.jar into your mods folder. - Install Cloth Config, here: [https://modrinth.com/mod/cloth-config](https://modrinth.com/mod/cloth-config) - Run Minecraft. - Using anything which is not OpenRGB? 1. Start Minecraft. 2. Wait for MineLights.exe to finish downloading in the background. 3. If all goes well, you will see a dialog asking you if you want to grant `MineLights.exe` permission to access the internet. 4. After accepting, your supported devices will show red. ## Full Changelog & Technical Details - Replaced loader-specific About descriptions in all language files. - Made Fabric and NeoForge metadata descriptions loader-neutral, matching Quilt. - Added Minecraft 26.3 target metadata and a loader-independent client tick hook for Quilt builds from Minecraft 1.14.4 onward. - Updated Quilt dependencies and supported-version documentation.

# MineLights 2.3.8.2 This release adds native Quilt support and removes loader-specific wording from the MineLights descriptions. Previous server version compatible (as of 2.3.1)! ## Key Features & Major Changes - Updated the About description across all translations to describe MineLights as a Minecraft mod. - Updated Fabric, Quilt, and NeoForge metadata descriptions to use the same loader-neutral wording. - Added native Quilt builds from Minecraft 1.14.4 through 26.3 without a Fabric API or Quilt API library dependency. ## Installation / Upgrade Instructions - DELETE your old mine-lights-\*.jar file completely. - Download the jar from this release. - Place the new minelights-\*.jar into your mods folder. - Install Cloth Config, here: [https://modrinth.com/mod/cloth-config](https://modrinth.com/mod/cloth-config) - Run Minecraft. - Using anything which is not OpenRGB? 1. Start Minecraft. 2. Wait for MineLights.exe to finish downloading in the background. 3. If all goes well, you will see a dialog asking you if you want to grant `MineLights.exe` permission to access the internet. 4. After accepting, your supported devices will show red. ## Full Changelog & Technical Details - Replaced loader-specific About descriptions in all language files. - Made Fabric and NeoForge metadata descriptions loader-neutral, matching Quilt. - Added Minecraft 26.3 target metadata and a loader-independent client tick hook for Quilt builds from Minecraft 1.14.4 onward. - Updated Quilt dependencies and supported-version documentation.

# MineLights 2.3.8.2 This release adds native Quilt support and removes loader-specific wording from the MineLights descriptions. Previous server version compatible (as of 2.3.1)! ## Key Features & Major Changes - Updated the About description across all translations to describe MineLights as a Minecraft mod. - Updated Fabric, Quilt, and NeoForge metadata descriptions to use the same loader-neutral wording. - Added native Quilt builds from Minecraft 1.14.4 through 26.3 without a Fabric API or Quilt API library dependency. ## Installation / Upgrade Instructions - DELETE your old mine-lights-\*.jar file completely. - Download the jar from this release. - Place the new minelights-\*.jar into your mods folder. - Install Cloth Config, here: [https://modrinth.com/mod/cloth-config](https://modrinth.com/mod/cloth-config) - Run Minecraft. - Using anything which is not OpenRGB? 1. Start Minecraft. 2. Wait for MineLights.exe to finish downloading in the background. 3. If all goes well, you will see a dialog asking you if you want to grant `MineLights.exe` permission to access the internet. 4. After accepting, your supported devices will show red. ## Full Changelog & Technical Details - Replaced loader-specific About descriptions in all language files. - Made Fabric and NeoForge metadata descriptions loader-neutral, matching Quilt. - Added Minecraft 26.3 target metadata and a loader-independent client tick hook for Quilt builds from Minecraft 1.14.4 onward. - Updated Quilt dependencies and supported-version documentation.

# MineLights 2.3.8.2 This release adds native Quilt support and removes loader-specific wording from the MineLights descriptions. Previous server version compatible (as of 2.3.1)! ## Key Features & Major Changes - Updated the About description across all translations to describe MineLights as a Minecraft mod. - Updated Fabric, Quilt, and NeoForge metadata descriptions to use the same loader-neutral wording. - Added native Quilt builds from Minecraft 1.14.4 through 26.3 without a Fabric API or Quilt API library dependency. ## Installation / Upgrade Instructions - DELETE your old mine-lights-\*.jar file completely. - Download the jar from this release. - Place the new minelights-\*.jar into your mods folder. - Install Cloth Config, here: [https://modrinth.com/mod/cloth-config](https://modrinth.com/mod/cloth-config) - Run Minecraft. - Using anything which is not OpenRGB? 1. Start Minecraft. 2. Wait for MineLights.exe to finish downloading in the background. 3. If all goes well, you will see a dialog asking you if you want to grant `MineLights.exe` permission to access the internet. 4. After accepting, your supported devices will show red. ## Full Changelog & Technical Details - Replaced loader-specific About descriptions in all language files. - Made Fabric and NeoForge metadata descriptions loader-neutral, matching Quilt. - Added Minecraft 26.3 target metadata and a loader-independent client tick hook for Quilt builds from Minecraft 1.14.4 onward. - Updated Quilt dependencies and supported-version documentation.

# MineLights 2.3.8.2 This release adds native Quilt support and removes loader-specific wording from the MineLights descriptions. Previous server version compatible (as of 2.3.1)! ## Key Features & Major Changes - Updated the About description across all translations to describe MineLights as a Minecraft mod. - Updated Fabric, Quilt, and NeoForge metadata descriptions to use the same loader-neutral wording. - Added native Quilt builds from Minecraft 1.14.4 through 26.3 without a Fabric API or Quilt API library dependency. ## Installation / Upgrade Instructions - DELETE your old mine-lights-\*.jar file completely. - Download the jar from this release. - Place the new minelights-\*.jar into your mods folder. - Install Cloth Config, here: [https://modrinth.com/mod/cloth-config](https://modrinth.com/mod/cloth-config) - Run Minecraft. - Using anything which is not OpenRGB? 1. Start Minecraft. 2. Wait for MineLights.exe to finish downloading in the background. 3. If all goes well, you will see a dialog asking you if you want to grant `MineLights.exe` permission to access the internet. 4. After accepting, your supported devices will show red. ## Full Changelog & Technical Details - Replaced loader-specific About descriptions in all language files. - Made Fabric and NeoForge metadata descriptions loader-neutral, matching Quilt. - Added Minecraft 26.3 target metadata and a loader-independent client tick hook for Quilt builds from Minecraft 1.14.4 onward. - Updated Quilt dependencies and supported-version documentation.

# MineLights 2.3.8.2 This release adds native Quilt support and removes loader-specific wording from the MineLights descriptions. Previous server version compatible (as of 2.3.1)! ## Key Features & Major Changes - Updated the About description across all translations to describe MineLights as a Minecraft mod. - Updated Fabric, Quilt, and NeoForge metadata descriptions to use the same loader-neutral wording. - Added native Quilt builds from Minecraft 1.14.4 through 26.3 without a Fabric API or Quilt API library dependency. ## Installation / Upgrade Instructions - DELETE your old mine-lights-\*.jar file completely. - Download the jar from this release. - Place the new minelights-\*.jar into your mods folder. - Install Cloth Config, here: [https://modrinth.com/mod/cloth-config](https://modrinth.com/mod/cloth-config) - Run Minecraft. - Using anything which is not OpenRGB? 1. Start Minecraft. 2. Wait for MineLights.exe to finish downloading in the background. 3. If all goes well, you will see a dialog asking you if you want to grant `MineLights.exe` permission to access the internet. 4. After accepting, your supported devices will show red. ## Full Changelog & Technical Details - Replaced loader-specific About descriptions in all language files. - Made Fabric and NeoForge metadata descriptions loader-neutral, matching Quilt. - Added Minecraft 26.3 target metadata and a loader-independent client tick hook for Quilt builds from Minecraft 1.14.4 onward. - Updated Quilt dependencies and supported-version documentation.

# MineLights 2.3.8.2 This release adds native Quilt support and removes loader-specific wording from the MineLights descriptions. Previous server version compatible (as of 2.3.1)! ## Key Features & Major Changes - Updated the About description across all translations to describe MineLights as a Minecraft mod. - Updated Fabric, Quilt, and NeoForge metadata descriptions to use the same loader-neutral wording. - Added native Quilt builds from Minecraft 1.14.4 through 26.3 without a Fabric API or Quilt API library dependency. ## Installation / Upgrade Instructions - DELETE your old mine-lights-\*.jar file completely. - Download the jar from this release. - Place the new minelights-\*.jar into your mods folder. - Install Cloth Config, here: [https://modrinth.com/mod/cloth-config](https://modrinth.com/mod/cloth-config) - Run Minecraft. - Using anything which is not OpenRGB? 1. Start Minecraft. 2. Wait for MineLights.exe to finish downloading in the background. 3. If all goes well, you will see a dialog asking you if you want to grant `MineLights.exe` permission to access the internet. 4. After accepting, your supported devices will show red. ## Full Changelog & Technical Details - Replaced loader-specific About descriptions in all language files. - Made Fabric and NeoForge metadata descriptions loader-neutral, matching Quilt. - Added Minecraft 26.3 target metadata and a loader-independent client tick hook for Quilt builds from Minecraft 1.14.4 onward. - Updated Quilt dependencies and supported-version documentation.

# MineLights 2.3.8.2 This release adds native Quilt support and removes loader-specific wording from the MineLights descriptions. Previous server version compatible (as of 2.3.1)! ## Key Features & Major Changes - Updated the About description across all translations to describe MineLights as a Minecraft mod. - Updated Fabric, Quilt, and NeoForge metadata descriptions to use the same loader-neutral wording. - Added native Quilt builds from Minecraft 1.14.4 through 26.3 without a Fabric API or Quilt API library dependency. ## Installation / Upgrade Instructions - DELETE your old mine-lights-\*.jar file completely. - Download the jar from this release. - Place the new minelights-\*.jar into your mods folder. - Install Cloth Config, here: [https://modrinth.com/mod/cloth-config](https://modrinth.com/mod/cloth-config) - Run Minecraft. - Using anything which is not OpenRGB? 1. Start Minecraft. 2. Wait for MineLights.exe to finish downloading in the background. 3. If all goes well, you will see a dialog asking you if you want to grant `MineLights.exe` permission to access the internet. 4. After accepting, your supported devices will show red. ## Full Changelog & Technical Details - Replaced loader-specific About descriptions in all language files. - Made Fabric and NeoForge metadata descriptions loader-neutral, matching Quilt. - Added Minecraft 26.3 target metadata and a loader-independent client tick hook for Quilt builds from Minecraft 1.14.4 onward. - Updated Quilt dependencies and supported-version documentation.

# MineLights 2.3.8.2 This release adds native Quilt support and removes loader-specific wording from the MineLights descriptions. Previous server version compatible (as of 2.3.1)! ## Key Features & Major Changes - Updated the About description across all translations to describe MineLights as a Minecraft mod. - Updated Fabric, Quilt, and NeoForge metadata descriptions to use the same loader-neutral wording. - Added native Quilt builds from Minecraft 1.14.4 through 26.3 without a Fabric API or Quilt API library dependency. ## Installation / Upgrade Instructions - DELETE your old mine-lights-\*.jar file completely. - Download the jar from this release. - Place the new minelights-\*.jar into your mods folder. - Install Cloth Config, here: [https://modrinth.com/mod/cloth-config](https://modrinth.com/mod/cloth-config) - Run Minecraft. - Using anything which is not OpenRGB? 1. Start Minecraft. 2. Wait for MineLights.exe to finish downloading in the background. 3. If all goes well, you will see a dialog asking you if you want to grant `MineLights.exe` permission to access the internet. 4. After accepting, your supported devices will show red. ## Full Changelog & Technical Details - Replaced loader-specific About descriptions in all language files. - Made Fabric and NeoForge metadata descriptions loader-neutral, matching Quilt. - Added Minecraft 26.3 target metadata and a loader-independent client tick hook for Quilt builds from Minecraft 1.14.4 onward. - Updated Quilt dependencies and supported-version documentation.

# MineLights 2.3.8.2 This release adds native Quilt support and removes loader-specific wording from the MineLights descriptions. Previous server version compatible (as of 2.3.1)! ## Key Features & Major Changes - Updated the About description across all translations to describe MineLights as a Minecraft mod. - Updated Fabric, Quilt, and NeoForge metadata descriptions to use the same loader-neutral wording. - Added native Quilt builds from Minecraft 1.14.4 through 26.3 without a Fabric API or Quilt API library dependency. ## Installation / Upgrade Instructions - DELETE your old mine-lights-\*.jar file completely. - Download the jar from this release. - Place the new minelights-\*.jar into your mods folder. - Install Cloth Config, here: [https://modrinth.com/mod/cloth-config](https://modrinth.com/mod/cloth-config) - Run Minecraft. - Using anything which is not OpenRGB? 1. Start Minecraft. 2. Wait for MineLights.exe to finish downloading in the background. 3. If all goes well, you will see a dialog asking you if you want to grant `MineLights.exe` permission to access the internet. 4. After accepting, your supported devices will show red. ## Full Changelog & Technical Details - Replaced loader-specific About descriptions in all language files. - Made Fabric and NeoForge metadata descriptions loader-neutral, matching Quilt. - Added Minecraft 26.3 target metadata and a loader-independent client tick hook for Quilt builds from Minecraft 1.14.4 onward. - Updated Quilt dependencies and supported-version documentation.

# MineLights 2.3.8.2 This release adds native Quilt support and removes loader-specific wording from the MineLights descriptions. Previous server version compatible (as of 2.3.1)! ## Key Features & Major Changes - Updated the About description across all translations to describe MineLights as a Minecraft mod. - Updated Fabric, Quilt, and NeoForge metadata descriptions to use the same loader-neutral wording. - Added native Quilt builds from Minecraft 1.14.4 through 26.3 without a Fabric API or Quilt API library dependency. ## Installation / Upgrade Instructions - DELETE your old mine-lights-\*.jar file completely. - Download the jar from this release. - Place the new minelights-\*.jar into your mods folder. - Install Cloth Config, here: [https://modrinth.com/mod/cloth-config](https://modrinth.com/mod/cloth-config) - Run Minecraft. - Using anything which is not OpenRGB? 1. Start Minecraft. 2. Wait for MineLights.exe to finish downloading in the background. 3. If all goes well, you will see a dialog asking you if you want to grant `MineLights.exe` permission to access the internet. 4. After accepting, your supported devices will show red. ## Full Changelog & Technical Details - Replaced loader-specific About descriptions in all language files. - Made Fabric and NeoForge metadata descriptions loader-neutral, matching Quilt. - Added Minecraft 26.3 target metadata and a loader-independent client tick hook for Quilt builds from Minecraft 1.14.4 onward. - Updated Quilt dependencies and supported-version documentation.

# MineLights 2.3.8.2 This release adds native Quilt support and removes loader-specific wording from the MineLights descriptions. Previous server version compatible (as of 2.3.1)! ## Key Features & Major Changes - Updated the About description across all translations to describe MineLights as a Minecraft mod. - Updated Fabric, Quilt, and NeoForge metadata descriptions to use the same loader-neutral wording. - Added native Quilt builds from Minecraft 1.14.4 through 26.3 without a Fabric API or Quilt API library dependency. ## Installation / Upgrade Instructions - DELETE your old mine-lights-\*.jar file completely. - Download the jar from this release. - Place the new minelights-\*.jar into your mods folder. - Install Cloth Config, here: [https://modrinth.com/mod/cloth-config](https://modrinth.com/mod/cloth-config) - Run Minecraft. - Using anything which is not OpenRGB? 1. Start Minecraft. 2. Wait for MineLights.exe to finish downloading in the background. 3. If all goes well, you will see a dialog asking you if you want to grant `MineLights.exe` permission to access the internet. 4. After accepting, your supported devices will show red. ## Full Changelog & Technical Details - Replaced loader-specific About descriptions in all language files. - Made Fabric and NeoForge metadata descriptions loader-neutral, matching Quilt. - Added Minecraft 26.3 target metadata and a loader-independent client tick hook for Quilt builds from Minecraft 1.14.4 onward. - Updated Quilt dependencies and supported-version documentation.

# MineLights 2.3.8.2 This release adds native Quilt support and removes loader-specific wording from the MineLights descriptions. Previous server version compatible (as of 2.3.1)! ## Key Features & Major Changes - Updated the About description across all translations to describe MineLights as a Minecraft mod. - Updated Fabric, Quilt, and NeoForge metadata descriptions to use the same loader-neutral wording. - Added native Quilt builds from Minecraft 1.14.4 through 26.3 without a Fabric API or Quilt API library dependency. ## Installation / Upgrade Instructions - DELETE your old mine-lights-\*.jar file completely. - Download the jar from this release. - Place the new minelights-\*.jar into your mods folder. - Install Cloth Config, here: [https://modrinth.com/mod/cloth-config](https://modrinth.com/mod/cloth-config) - Run Minecraft. - Using anything which is not OpenRGB? 1. Start Minecraft. 2. Wait for MineLights.exe to finish downloading in the background. 3. If all goes well, you will see a dialog asking you if you want to grant `MineLights.exe` permission to access the internet. 4. After accepting, your supported devices will show red. ## Full Changelog & Technical Details - Replaced loader-specific About descriptions in all language files. - Made Fabric and NeoForge metadata descriptions loader-neutral, matching Quilt. - Added Minecraft 26.3 target metadata and a loader-independent client tick hook for Quilt builds from Minecraft 1.14.4 onward. - Updated Quilt dependencies and supported-version documentation.

# MineLights 2.3.8.2 This release adds native Quilt support and removes loader-specific wording from the MineLights descriptions. Previous server version compatible (as of 2.3.1)! ## Key Features & Major Changes - Updated the About description across all translations to describe MineLights as a Minecraft mod. - Updated Fabric, Quilt, and NeoForge metadata descriptions to use the same loader-neutral wording. - Added native Quilt builds from Minecraft 1.14.4 through 26.3 without a Fabric API or Quilt API library dependency. ## Installation / Upgrade Instructions - DELETE your old mine-lights-\*.jar file completely. - Download the jar from this release. - Place the new minelights-\*.jar into your mods folder. - Install Cloth Config, here: [https://modrinth.com/mod/cloth-config](https://modrinth.com/mod/cloth-config) - Run Minecraft. - Using anything which is not OpenRGB? 1. Start Minecraft. 2. Wait for MineLights.exe to finish downloading in the background. 3. If all goes well, you will see a dialog asking you if you want to grant `MineLights.exe` permission to access the internet. 4. After accepting, your supported devices will show red. ## Full Changelog & Technical Details - Replaced loader-specific About descriptions in all language files. - Made Fabric and NeoForge metadata descriptions loader-neutral, matching Quilt. - Added Minecraft 26.3 target metadata and a loader-independent client tick hook for Quilt builds from Minecraft 1.14.4 onward. - Updated Quilt dependencies and supported-version documentation.

# MineLights 2.3.8.2 This release adds native Quilt support and removes loader-specific wording from the MineLights descriptions. Previous server version compatible (as of 2.3.1)! ## Key Features & Major Changes - Updated the About description across all translations to describe MineLights as a Minecraft mod. - Updated Fabric, Quilt, and NeoForge metadata descriptions to use the same loader-neutral wording. - Added native Quilt builds from Minecraft 1.14.4 through 26.3 without a Fabric API or Quilt API library dependency. ## Installation / Upgrade Instructions - DELETE your old mine-lights-\*.jar file completely. - Download the jar from this release. - Place the new minelights-\*.jar into your mods folder. - Install Cloth Config, here: [https://modrinth.com/mod/cloth-config](https://modrinth.com/mod/cloth-config) - Run Minecraft. - Using anything which is not OpenRGB? 1. Start Minecraft. 2. Wait for MineLights.exe to finish downloading in the background. 3. If all goes well, you will see a dialog asking you if you want to grant `MineLights.exe` permission to access the internet. 4. After accepting, your supported devices will show red. ## Full Changelog & Technical Details - Replaced loader-specific About descriptions in all language files. - Made Fabric and NeoForge metadata descriptions loader-neutral, matching Quilt. - Added Minecraft 26.3 target metadata and a loader-independent client tick hook for Quilt builds from Minecraft 1.14.4 onward. - Updated Quilt dependencies and supported-version documentation.

# MineLights 2.3.8.2 This release adds native Quilt support and removes loader-specific wording from the MineLights descriptions. Previous server version compatible (as of 2.3.1)! ## Key Features & Major Changes - Updated the About description across all translations to describe MineLights as a Minecraft mod. - Updated Fabric, Quilt, and NeoForge metadata descriptions to use the same loader-neutral wording. - Added native Quilt builds from Minecraft 1.14.4 through 26.3 without a Fabric API or Quilt API library dependency. ## Installation / Upgrade Instructions - DELETE your old mine-lights-\*.jar file completely. - Download the jar from this release. - Place the new minelights-\*.jar into your mods folder. - Install Cloth Config, here: [https://modrinth.com/mod/cloth-config](https://modrinth.com/mod/cloth-config) - Run Minecraft. - Using anything which is not OpenRGB? 1. Start Minecraft. 2. Wait for MineLights.exe to finish downloading in the background. 3. If all goes well, you will see a dialog asking you if you want to grant `MineLights.exe` permission to access the internet. 4. After accepting, your supported devices will show red. ## Full Changelog & Technical Details - Replaced loader-specific About descriptions in all language files. - Made Fabric and NeoForge metadata descriptions loader-neutral, matching Quilt. - Added Minecraft 26.3 target metadata and a loader-independent client tick hook for Quilt builds from Minecraft 1.14.4 onward. - Updated Quilt dependencies and supported-version documentation.

# MineLights 2.3.8.2 This release adds native Quilt support and removes loader-specific wording from the MineLights descriptions. Previous server version compatible (as of 2.3.1)! ## Key Features & Major Changes - Updated the About description across all translations to describe MineLights as a Minecraft mod. - Updated Fabric, Quilt, and NeoForge metadata descriptions to use the same loader-neutral wording. - Added native Quilt builds from Minecraft 1.14.4 through 26.3 without a Fabric API or Quilt API library dependency. ## Installation / Upgrade Instructions - DELETE your old mine-lights-\*.jar file completely. - Download the jar from this release. - Place the new minelights-\*.jar into your mods folder. - Install Cloth Config, here: [https://modrinth.com/mod/cloth-config](https://modrinth.com/mod/cloth-config) - Run Minecraft. - Using anything which is not OpenRGB? 1. Start Minecraft. 2. Wait for MineLights.exe to finish downloading in the background. 3. If all goes well, you will see a dialog asking you if you want to grant `MineLights.exe` permission to access the internet. 4. After accepting, your supported devices will show red. ## Full Changelog & Technical Details - Replaced loader-specific About descriptions in all language files. - Made Fabric and NeoForge metadata descriptions loader-neutral, matching Quilt. - Added Minecraft 26.3 target metadata and a loader-independent client tick hook for Quilt builds from Minecraft 1.14.4 onward. - Updated Quilt dependencies and supported-version documentation.

# MineLights 2.3.8.2 This release adds native Quilt support and removes loader-specific wording from the MineLights descriptions. Previous server version compatible (as of 2.3.1)! ## Key Features & Major Changes - Updated the About description across all translations to describe MineLights as a Minecraft mod. - Updated Fabric, Quilt, and NeoForge metadata descriptions to use the same loader-neutral wording. - Added native Quilt builds from Minecraft 1.14.4 through 26.3 without a Fabric API or Quilt API library dependency. ## Installation / Upgrade Instructions - DELETE your old mine-lights-\*.jar file completely. - Download the jar from this release. - Place the new minelights-\*.jar into your mods folder. - Install Cloth Config, here: [https://modrinth.com/mod/cloth-config](https://modrinth.com/mod/cloth-config) - Run Minecraft. - Using anything which is not OpenRGB? 1. Start Minecraft. 2. Wait for MineLights.exe to finish downloading in the background. 3. If all goes well, you will see a dialog asking you if you want to grant `MineLights.exe` permission to access the internet. 4. After accepting, your supported devices will show red. ## Full Changelog & Technical Details - Replaced loader-specific About descriptions in all language files. - Made Fabric and NeoForge metadata descriptions loader-neutral, matching Quilt. - Added Minecraft 26.3 target metadata and a loader-independent client tick hook for Quilt builds from Minecraft 1.14.4 onward. - Updated Quilt dependencies and supported-version documentation.

# MineLights 2.3.8.2 This release adds native Quilt support and removes loader-specific wording from the MineLights descriptions. Previous server version compatible (as of 2.3.1)! ## Key Features & Major Changes - Updated the About description across all translations to describe MineLights as a Minecraft mod. - Updated Fabric, Quilt, and NeoForge metadata descriptions to use the same loader-neutral wording. - Added native Quilt builds from Minecraft 1.14.4 through 26.3 without a Fabric API or Quilt API library dependency. ## Installation / Upgrade Instructions - DELETE your old mine-lights-\*.jar file completely. - Download the jar from this release. - Place the new minelights-\*.jar into your mods folder. - Install Cloth Config, here: [https://modrinth.com/mod/cloth-config](https://modrinth.com/mod/cloth-config) - Run Minecraft. - Using anything which is not OpenRGB? 1. Start Minecraft. 2. Wait for MineLights.exe to finish downloading in the background. 3. If all goes well, you will see a dialog asking you if you want to grant `MineLights.exe` permission to access the internet. 4. After accepting, your supported devices will show red. ## Full Changelog & Technical Details - Replaced loader-specific About descriptions in all language files. - Made Fabric and NeoForge metadata descriptions loader-neutral, matching Quilt. - Added Minecraft 26.3 target metadata and a loader-independent client tick hook for Quilt builds from Minecraft 1.14.4 onward. - Updated Quilt dependencies and supported-version documentation.

# MineLights 2.3.8.2 This release adds native Quilt support and removes loader-specific wording from the MineLights descriptions. Previous server version compatible (as of 2.3.1)! ## Key Features & Major Changes - Updated the About description across all translations to describe MineLights as a Minecraft mod. - Updated Fabric, Quilt, and NeoForge metadata descriptions to use the same loader-neutral wording. - Added native Quilt builds from Minecraft 1.14.4 through 26.3 without a Fabric API or Quilt API library dependency. ## Installation / Upgrade Instructions - DELETE your old mine-lights-\*.jar file completely. - Download the jar from this release. - Place the new minelights-\*.jar into your mods folder. - Install Cloth Config, here: [https://modrinth.com/mod/cloth-config](https://modrinth.com/mod/cloth-config) - Run Minecraft. - Using anything which is not OpenRGB? 1. Start Minecraft. 2. Wait for MineLights.exe to finish downloading in the background. 3. If all goes well, you will see a dialog asking you if you want to grant `MineLights.exe` permission to access the internet. 4. After accepting, your supported devices will show red. ## Full Changelog & Technical Details - Replaced loader-specific About descriptions in all language files. - Made Fabric and NeoForge metadata descriptions loader-neutral, matching Quilt. - Added Minecraft 26.3 target metadata and a loader-independent client tick hook for Quilt builds from Minecraft 1.14.4 onward. - Updated Quilt dependencies and supported-version documentation.

# MineLights 2.3.8.2 This release adds native Quilt support and removes loader-specific wording from the MineLights descriptions. Previous server version compatible (as of 2.3.1)! ## Key Features & Major Changes - Updated the About description across all translations to describe MineLights as a Minecraft mod. - Updated Fabric, Quilt, and NeoForge metadata descriptions to use the same loader-neutral wording. - Added native Quilt builds from Minecraft 1.14.4 through 26.3 without a Fabric API or Quilt API library dependency. ## Installation / Upgrade Instructions - DELETE your old mine-lights-\*.jar file completely. - Download the jar from this release. - Place the new minelights-\*.jar into your mods folder. - Install Cloth Config, here: [https://modrinth.com/mod/cloth-config](https://modrinth.com/mod/cloth-config) - Run Minecraft. - Using anything which is not OpenRGB? 1. Start Minecraft. 2. Wait for MineLights.exe to finish downloading in the background. 3. If all goes well, you will see a dialog asking you if you want to grant `MineLights.exe` permission to access the internet. 4. After accepting, your supported devices will show red. ## Full Changelog & Technical Details - Replaced loader-specific About descriptions in all language files. - Made Fabric and NeoForge metadata descriptions loader-neutral, matching Quilt. - Added Minecraft 26.3 target metadata and a loader-independent client tick hook for Quilt builds from Minecraft 1.14.4 onward. - Updated Quilt dependencies and supported-version documentation.

# MineLights 2.3.8.2 This release adds native Quilt support and removes loader-specific wording from the MineLights descriptions. Previous server version compatible (as of 2.3.1)! ## Key Features & Major Changes - Updated the About description across all translations to describe MineLights as a Minecraft mod. - Updated Fabric, Quilt, and NeoForge metadata descriptions to use the same loader-neutral wording. - Added native Quilt builds from Minecraft 1.14.4 through 26.3 without a Fabric API or Quilt API library dependency. ## Installation / Upgrade Instructions - DELETE your old mine-lights-\*.jar file completely. - Download the jar from this release. - Place the new minelights-\*.jar into your mods folder. - Install Cloth Config, here: [https://modrinth.com/mod/cloth-config](https://modrinth.com/mod/cloth-config) - Run Minecraft. - Using anything which is not OpenRGB? 1. Start Minecraft. 2. Wait for MineLights.exe to finish downloading in the background. 3. If all goes well, you will see a dialog asking you if you want to grant `MineLights.exe` permission to access the internet. 4. After accepting, your supported devices will show red. ## Full Changelog & Technical Details - Replaced loader-specific About descriptions in all language files. - Made Fabric and NeoForge metadata descriptions loader-neutral, matching Quilt. - Added Minecraft 26.3 target metadata and a loader-independent client tick hook for Quilt builds from Minecraft 1.14.4 onward. - Updated Quilt dependencies and supported-version documentation.

# MineLights 2.3.8.2 This release adds native Quilt support and removes loader-specific wording from the MineLights descriptions. Previous server version compatible (as of 2.3.1)! ## Key Features & Major Changes - Updated the About description across all translations to describe MineLights as a Minecraft mod. - Updated Fabric, Quilt, and NeoForge metadata descriptions to use the same loader-neutral wording. - Added native Quilt builds from Minecraft 1.14.4 through 26.3 without a Fabric API or Quilt API library dependency. ## Installation / Upgrade Instructions - DELETE your old mine-lights-\*.jar file completely. - Download the jar from this release. - Place the new minelights-\*.jar into your mods folder. - Install Cloth Config, here: [https://modrinth.com/mod/cloth-config](https://modrinth.com/mod/cloth-config) - Run Minecraft. - Using anything which is not OpenRGB? 1. Start Minecraft. 2. Wait for MineLights.exe to finish downloading in the background. 3. If all goes well, you will see a dialog asking you if you want to grant `MineLights.exe` permission to access the internet. 4. After accepting, your supported devices will show red. ## Full Changelog & Technical Details - Replaced loader-specific About descriptions in all language files. - Made Fabric and NeoForge metadata descriptions loader-neutral, matching Quilt. - Added Minecraft 26.3 target metadata and a loader-independent client tick hook for Quilt builds from Minecraft 1.14.4 onward. - Updated Quilt dependencies and supported-version documentation.

# MineLights 2.3.8.2 This release adds native Quilt support and removes loader-specific wording from the MineLights descriptions. Previous server version compatible (as of 2.3.1)! ## Key Features & Major Changes - Updated the About description across all translations to describe MineLights as a Minecraft mod. - Updated Fabric, Quilt, and NeoForge metadata descriptions to use the same loader-neutral wording. - Added native Quilt builds from Minecraft 1.14.4 through 26.3 without a Fabric API or Quilt API library dependency. ## Installation / Upgrade Instructions - DELETE your old mine-lights-\*.jar file completely. - Download the jar from this release. - Place the new minelights-\*.jar into your mods folder. - Install Cloth Config, here: [https://modrinth.com/mod/cloth-config](https://modrinth.com/mod/cloth-config) - Run Minecraft. - Using anything which is not OpenRGB? 1. Start Minecraft. 2. Wait for MineLights.exe to finish downloading in the background. 3. If all goes well, you will see a dialog asking you if you want to grant `MineLights.exe` permission to access the internet. 4. After accepting, your supported devices will show red. ## Full Changelog & Technical Details - Replaced loader-specific About descriptions in all language files. - Made Fabric and NeoForge metadata descriptions loader-neutral, matching Quilt. - Added Minecraft 26.3 target metadata and a loader-independent client tick hook for Quilt builds from Minecraft 1.14.4 onward. - Updated Quilt dependencies and supported-version documentation.

# MineLights 2.3.8.2 This release adds native Quilt support and removes loader-specific wording from the MineLights descriptions. Previous server version compatible (as of 2.3.1)! ## Key Features & Major Changes - Updated the About description across all translations to describe MineLights as a Minecraft mod. - Updated Fabric, Quilt, and NeoForge metadata descriptions to use the same loader-neutral wording. - Added native Quilt builds from Minecraft 1.14.4 through 26.3 without a Fabric API or Quilt API library dependency. ## Installation / Upgrade Instructions - DELETE your old mine-lights-\*.jar file completely. - Download the jar from this release. - Place the new minelights-\*.jar into your mods folder. - Install Cloth Config, here: [https://modrinth.com/mod/cloth-config](https://modrinth.com/mod/cloth-config) - Run Minecraft. - Using anything which is not OpenRGB? 1. Start Minecraft. 2. Wait for MineLights.exe to finish downloading in the background. 3. If all goes well, you will see a dialog asking you if you want to grant `MineLights.exe` permission to access the internet. 4. After accepting, your supported devices will show red. ## Full Changelog & Technical Details - Replaced loader-specific About descriptions in all language files. - Made Fabric and NeoForge metadata descriptions loader-neutral, matching Quilt. - Added Minecraft 26.3 target metadata and a loader-independent client tick hook for Quilt builds from Minecraft 1.14.4 onward. - Updated Quilt dependencies and supported-version documentation.

# MineLights 2.3.8.2 This release adds native Quilt support and removes loader-specific wording from the MineLights descriptions. Previous server version compatible (as of 2.3.1)! ## Key Features & Major Changes - Updated the About description across all translations to describe MineLights as a Minecraft mod. - Updated Fabric, Quilt, and NeoForge metadata descriptions to use the same loader-neutral wording. - Added native Quilt builds from Minecraft 1.14.4 through 26.3 without a Fabric API or Quilt API library dependency. ## Installation / Upgrade Instructions - DELETE your old mine-lights-\*.jar file completely. - Download the jar from this release. - Place the new minelights-\*.jar into your mods folder. - Install Cloth Config, here: [https://modrinth.com/mod/cloth-config](https://modrinth.com/mod/cloth-config) - Run Minecraft. - Using anything which is not OpenRGB? 1. Start Minecraft. 2. Wait for MineLights.exe to finish downloading in the background. 3. If all goes well, you will see a dialog asking you if you want to grant `MineLights.exe` permission to access the internet. 4. After accepting, your supported devices will show red. ## Full Changelog & Technical Details - Replaced loader-specific About descriptions in all language files. - Made Fabric and NeoForge metadata descriptions loader-neutral, matching Quilt. - Added Minecraft 26.3 target metadata and a loader-independent client tick hook for Quilt builds from Minecraft 1.14.4 onward. - Updated Quilt dependencies and supported-version documentation.

# MineLights 2.3.8.2 This release adds native Quilt support and removes loader-specific wording from the MineLights descriptions. Previous server version compatible (as of 2.3.1)! ## Key Features & Major Changes - Updated the About description across all translations to describe MineLights as a Minecraft mod. - Updated Fabric, Quilt, and NeoForge metadata descriptions to use the same loader-neutral wording. - Added native Quilt builds from Minecraft 1.14.4 through 26.3 without a Fabric API or Quilt API library dependency. ## Installation / Upgrade Instructions - DELETE your old mine-lights-\*.jar file completely. - Download the jar from this release. - Place the new minelights-\*.jar into your mods folder. - Install Cloth Config, here: [https://modrinth.com/mod/cloth-config](https://modrinth.com/mod/cloth-config) - Run Minecraft. - Using anything which is not OpenRGB? 1. Start Minecraft. 2. Wait for MineLights.exe to finish downloading in the background. 3. If all goes well, you will see a dialog asking you if you want to grant `MineLights.exe` permission to access the internet. 4. After accepting, your supported devices will show red. ## Full Changelog & Technical Details - Replaced loader-specific About descriptions in all language files. - Made Fabric and NeoForge metadata descriptions loader-neutral, matching Quilt. - Added Minecraft 26.3 target metadata and a loader-independent client tick hook for Quilt builds from Minecraft 1.14.4 onward. - Updated Quilt dependencies and supported-version documentation.

# MineLights 2.3.8.2 This release adds native Quilt support and removes loader-specific wording from the MineLights descriptions. Previous server version compatible (as of 2.3.1)! ## Key Features & Major Changes - Updated the About description across all translations to describe MineLights as a Minecraft mod. - Updated Fabric, Quilt, and NeoForge metadata descriptions to use the same loader-neutral wording. - Added native Quilt builds from Minecraft 1.14.4 through 26.3 without a Fabric API or Quilt API library dependency. ## Installation / Upgrade Instructions - DELETE your old mine-lights-\*.jar file completely. - Download the jar from this release. - Place the new minelights-\*.jar into your mods folder. - Install Cloth Config, here: [https://modrinth.com/mod/cloth-config](https://modrinth.com/mod/cloth-config) - Run Minecraft. - Using anything which is not OpenRGB? 1. Start Minecraft. 2. Wait for MineLights.exe to finish downloading in the background. 3. If all goes well, you will see a dialog asking you if you want to grant `MineLights.exe` permission to access the internet. 4. After accepting, your supported devices will show red. ## Full Changelog & Technical Details - Replaced loader-specific About descriptions in all language files. - Made Fabric and NeoForge metadata descriptions loader-neutral, matching Quilt. - Added Minecraft 26.3 target metadata and a loader-independent client tick hook for Quilt builds from Minecraft 1.14.4 onward. - Updated Quilt dependencies and supported-version documentation.

# MineLights 2.3.8.2 This release adds native Quilt support and removes loader-specific wording from the MineLights descriptions. Previous server version compatible (as of 2.3.1)! ## Key Features & Major Changes - Updated the About description across all translations to describe MineLights as a Minecraft mod. - Updated Fabric, Quilt, and NeoForge metadata descriptions to use the same loader-neutral wording. - Added native Quilt builds from Minecraft 1.14.4 through 26.3 without a Fabric API or Quilt API library dependency. ## Installation / Upgrade Instructions - DELETE your old mine-lights-\*.jar file completely. - Download the jar from this release. - Place the new minelights-\*.jar into your mods folder. - Install Cloth Config, here: [https://modrinth.com/mod/cloth-config](https://modrinth.com/mod/cloth-config) - Run Minecraft. - Using anything which is not OpenRGB? 1. Start Minecraft. 2. Wait for MineLights.exe to finish downloading in the background. 3. If all goes well, you will see a dialog asking you if you want to grant `MineLights.exe` permission to access the internet. 4. After accepting, your supported devices will show red. ## Full Changelog & Technical Details - Replaced loader-specific About descriptions in all language files. - Made Fabric and NeoForge metadata descriptions loader-neutral, matching Quilt. - Added Minecraft 26.3 target metadata and a loader-independent client tick hook for Quilt builds from Minecraft 1.14.4 onward. - Updated Quilt dependencies and supported-version documentation.

# MineLights 2.3.8.2 This release adds native Quilt support and removes loader-specific wording from the MineLights descriptions. Previous server version compatible (as of 2.3.1)! ## Key Features & Major Changes - Updated the About description across all translations to describe MineLights as a Minecraft mod. - Updated Fabric, Quilt, and NeoForge metadata descriptions to use the same loader-neutral wording. - Added native Quilt builds from Minecraft 1.14.4 through 26.3 without a Fabric API or Quilt API library dependency. ## Installation / Upgrade Instructions - DELETE your old mine-lights-\*.jar file completely. - Download the jar from this release. - Place the new minelights-\*.jar into your mods folder. - Install Cloth Config, here: [https://modrinth.com/mod/cloth-config](https://modrinth.com/mod/cloth-config) - Run Minecraft. - Using anything which is not OpenRGB? 1. Start Minecraft. 2. Wait for MineLights.exe to finish downloading in the background. 3. If all goes well, you will see a dialog asking you if you want to grant `MineLights.exe` permission to access the internet. 4. After accepting, your supported devices will show red. ## Full Changelog & Technical Details - Replaced loader-specific About descriptions in all language files. - Made Fabric and NeoForge metadata descriptions loader-neutral, matching Quilt. - Added Minecraft 26.3 target metadata and a loader-independent client tick hook for Quilt builds from Minecraft 1.14.4 onward. - Updated Quilt dependencies and supported-version documentation.

# MineLights 2.3.8.2 This release adds native Quilt support and removes loader-specific wording from the MineLights descriptions. Previous server version compatible (as of 2.3.1)! ## Key Features & Major Changes - Updated the About description across all translations to describe MineLights as a Minecraft mod. - Updated Fabric, Quilt, and NeoForge metadata descriptions to use the same loader-neutral wording. - Added native Quilt builds from Minecraft 1.14.4 through 26.3 without a Fabric API or Quilt API library dependency. ## Installation / Upgrade Instructions - DELETE your old mine-lights-\*.jar file completely. - Download the jar from this release. - Place the new minelights-\*.jar into your mods folder. - Install Cloth Config, here: [https://modrinth.com/mod/cloth-config](https://modrinth.com/mod/cloth-config) - Run Minecraft. - Using anything which is not OpenRGB? 1. Start Minecraft. 2. Wait for MineLights.exe to finish downloading in the background. 3. If all goes well, you will see a dialog asking you if you want to grant `MineLights.exe` permission to access the internet. 4. After accepting, your supported devices will show red. ## Full Changelog & Technical Details - Replaced loader-specific About descriptions in all language files. - Made Fabric and NeoForge metadata descriptions loader-neutral, matching Quilt. - Added Minecraft 26.3 target metadata and a loader-independent client tick hook for Quilt builds from Minecraft 1.14.4 onward. - Updated Quilt dependencies and supported-version documentation.

# MineLights 2.3.8.2 This release adds native Quilt support and removes loader-specific wording from the MineLights descriptions. Previous server version compatible (as of 2.3.1)! ## Key Features & Major Changes - Updated the About description across all translations to describe MineLights as a Minecraft mod. - Updated Fabric, Quilt, and NeoForge metadata descriptions to use the same loader-neutral wording. - Added native Quilt builds from Minecraft 1.14.4 through 26.3 without a Fabric API or Quilt API library dependency. ## Installation / Upgrade Instructions - DELETE your old mine-lights-\*.jar file completely. - Download the jar from this release. - Place the new minelights-\*.jar into your mods folder. - Install Cloth Config, here: [https://modrinth.com/mod/cloth-config](https://modrinth.com/mod/cloth-config) - Run Minecraft. - Using anything which is not OpenRGB? 1. Start Minecraft. 2. Wait for MineLights.exe to finish downloading in the background. 3. If all goes well, you will see a dialog asking you if you want to grant `MineLights.exe` permission to access the internet. 4. After accepting, your supported devices will show red. ## Full Changelog & Technical Details - Replaced loader-specific About descriptions in all language files. - Made Fabric and NeoForge metadata descriptions loader-neutral, matching Quilt. - Added Minecraft 26.3 target metadata and a loader-independent client tick hook for Quilt builds from Minecraft 1.14.4 onward. - Updated Quilt dependencies and supported-version documentation.

# MineLights 2.3.8.2 This release adds native Quilt support and removes loader-specific wording from the MineLights descriptions. Previous server version compatible (as of 2.3.1)! ## Key Features & Major Changes - Updated the About description across all translations to describe MineLights as a Minecraft mod. - Updated Fabric, Quilt, and NeoForge metadata descriptions to use the same loader-neutral wording. - Added native Quilt builds from Minecraft 1.14.4 through 26.3 without a Fabric API or Quilt API library dependency. ## Installation / Upgrade Instructions - DELETE your old mine-lights-\*.jar file completely. - Download the jar from this release. - Place the new minelights-\*.jar into your mods folder. - Install Cloth Config, here: [https://modrinth.com/mod/cloth-config](https://modrinth.com/mod/cloth-config) - Run Minecraft. - Using anything which is not OpenRGB? 1. Start Minecraft. 2. Wait for MineLights.exe to finish downloading in the background. 3. If all goes well, you will see a dialog asking you if you want to grant `MineLights.exe` permission to access the internet. 4. After accepting, your supported devices will show red. ## Full Changelog & Technical Details - Replaced loader-specific About descriptions in all language files. - Made Fabric and NeoForge metadata descriptions loader-neutral, matching Quilt. - Added Minecraft 26.3 target metadata and a loader-independent client tick hook for Quilt builds from Minecraft 1.14.4 onward. - Updated Quilt dependencies and supported-version documentation.

# MineLights 2.3.8.2 This release adds native Quilt support and removes loader-specific wording from the MineLights descriptions. Previous server version compatible (as of 2.3.1)! ## Key Features & Major Changes - Updated the About description across all translations to describe MineLights as a Minecraft mod. - Updated Fabric, Quilt, and NeoForge metadata descriptions to use the same loader-neutral wording. - Added native Quilt builds from Minecraft 1.14.4 through 26.3 without a Fabric API or Quilt API library dependency. ## Installation / Upgrade Instructions - DELETE your old mine-lights-\*.jar file completely. - Download the jar from this release. - Place the new minelights-\*.jar into your mods folder. - Install Cloth Config, here: [https://modrinth.com/mod/cloth-config](https://modrinth.com/mod/cloth-config) - Run Minecraft. - Using anything which is not OpenRGB? 1. Start Minecraft. 2. Wait for MineLights.exe to finish downloading in the background. 3. If all goes well, you will see a dialog asking you if you want to grant `MineLights.exe` permission to access the internet. 4. After accepting, your supported devices will show red. ## Full Changelog & Technical Details - Replaced loader-specific About descriptions in all language files. - Made Fabric and NeoForge metadata descriptions loader-neutral, matching Quilt. - Added Minecraft 26.3 target metadata and a loader-independent client tick hook for Quilt builds from Minecraft 1.14.4 onward. - Updated Quilt dependencies and supported-version documentation.

# MineLights 2.3.8.2 This release adds native Quilt support and removes loader-specific wording from the MineLights descriptions. Previous server version compatible (as of 2.3.1)! ## Key Features & Major Changes - Updated the About description across all translations to describe MineLights as a Minecraft mod. - Updated Fabric, Quilt, and NeoForge metadata descriptions to use the same loader-neutral wording. - Added native Quilt builds from Minecraft 1.14.4 through 26.3 without a Fabric API or Quilt API library dependency. ## Installation / Upgrade Instructions - DELETE your old mine-lights-\*.jar file completely. - Download the jar from this release. - Place the new minelights-\*.jar into your mods folder. - Install Cloth Config, here: [https://modrinth.com/mod/cloth-config](https://modrinth.com/mod/cloth-config) - Run Minecraft. - Using anything which is not OpenRGB? 1. Start Minecraft. 2. Wait for MineLights.exe to finish downloading in the background. 3. If all goes well, you will see a dialog asking you if you want to grant `MineLights.exe` permission to access the internet. 4. After accepting, your supported devices will show red. ## Full Changelog & Technical Details - Replaced loader-specific About descriptions in all language files. - Made Fabric and NeoForge metadata descriptions loader-neutral, matching Quilt. - Added Minecraft 26.3 target metadata and a loader-independent client tick hook for Quilt builds from Minecraft 1.14.4 onward. - Updated Quilt dependencies and supported-version documentation.

# MineLights 2.3.8.2 This release adds native Quilt support and removes loader-specific wording from the MineLights descriptions. Previous server version compatible (as of 2.3.1)! ## Key Features & Major Changes - Updated the About description across all translations to describe MineLights as a Minecraft mod. - Updated Fabric, Quilt, and NeoForge metadata descriptions to use the same loader-neutral wording. - Added native Quilt builds from Minecraft 1.14.4 through 26.3 without a Fabric API or Quilt API library dependency. ## Installation / Upgrade Instructions - DELETE your old mine-lights-\*.jar file completely. - Download the jar from this release. - Place the new minelights-\*.jar into your mods folder. - Install Cloth Config, here: [https://modrinth.com/mod/cloth-config](https://modrinth.com/mod/cloth-config) - Run Minecraft. - Using anything which is not OpenRGB? 1. Start Minecraft. 2. Wait for MineLights.exe to finish downloading in the background. 3. If all goes well, you will see a dialog asking you if you want to grant `MineLights.exe` permission to access the internet. 4. After accepting, your supported devices will show red. ## Full Changelog & Technical Details - Replaced loader-specific About descriptions in all language files. - Made Fabric and NeoForge metadata descriptions loader-neutral, matching Quilt. - Added Minecraft 26.3 target metadata and a loader-independent client tick hook for Quilt builds from Minecraft 1.14.4 onward. - Updated Quilt dependencies and supported-version documentation.

# MineLights 2.3.8.2 This release adds native Quilt support and removes loader-specific wording from the MineLights descriptions. Previous server version compatible (as of 2.3.1)! ## Key Features & Major Changes - Updated the About description across all translations to describe MineLights as a Minecraft mod. - Updated Fabric, Quilt, and NeoForge metadata descriptions to use the same loader-neutral wording. - Added native Quilt builds from Minecraft 1.14.4 through 26.3 without a Fabric API or Quilt API library dependency. ## Installation / Upgrade Instructions - DELETE your old mine-lights-\*.jar file completely. - Download the jar from this release. - Place the new minelights-\*.jar into your mods folder. - Install Cloth Config, here: [https://modrinth.com/mod/cloth-config](https://modrinth.com/mod/cloth-config) - Run Minecraft. - Using anything which is not OpenRGB? 1. Start Minecraft. 2. Wait for MineLights.exe to finish downloading in the background. 3. If all goes well, you will see a dialog asking you if you want to grant `MineLights.exe` permission to access the internet. 4. After accepting, your supported devices will show red. ## Full Changelog & Technical Details - Replaced loader-specific About descriptions in all language files. - Made Fabric and NeoForge metadata descriptions loader-neutral, matching Quilt. - Added Minecraft 26.3 target metadata and a loader-independent client tick hook for Quilt builds from Minecraft 1.14.4 onward. - Updated Quilt dependencies and supported-version documentation.

# MineLights 2.3.8.2 This release adds native Quilt support and removes loader-specific wording from the MineLights descriptions. Previous server version compatible (as of 2.3.1)! ## Key Features & Major Changes - Updated the About description across all translations to describe MineLights as a Minecraft mod. - Updated Fabric, Quilt, and NeoForge metadata descriptions to use the same loader-neutral wording. - Added native Quilt builds from Minecraft 1.14.4 through 26.3 without a Fabric API or Quilt API library dependency. ## Installation / Upgrade Instructions - DELETE your old mine-lights-\*.jar file completely. - Download the jar from this release. - Place the new minelights-\*.jar into your mods folder. - Install Cloth Config, here: [https://modrinth.com/mod/cloth-config](https://modrinth.com/mod/cloth-config) - Run Minecraft. - Using anything which is not OpenRGB? 1. Start Minecraft. 2. Wait for MineLights.exe to finish downloading in the background. 3. If all goes well, you will see a dialog asking you if you want to grant `MineLights.exe` permission to access the internet. 4. After accepting, your supported devices will show red. ## Full Changelog & Technical Details - Replaced loader-specific About descriptions in all language files. - Made Fabric and NeoForge metadata descriptions loader-neutral, matching Quilt. - Added Minecraft 26.3 target metadata and a loader-independent client tick hook for Quilt builds from Minecraft 1.14.4 onward. - Updated Quilt dependencies and supported-version documentation.

# MineLights 2.3.8.2 This release adds native Quilt support and removes loader-specific wording from the MineLights descriptions. Previous server version compatible (as of 2.3.1)! ## Key Features & Major Changes - Updated the About description across all translations to describe MineLights as a Minecraft mod. - Updated Fabric, Quilt, and NeoForge metadata descriptions to use the same loader-neutral wording. - Added native Quilt builds from Minecraft 1.14.4 through 26.3 without a Fabric API or Quilt API library dependency. ## Installation / Upgrade Instructions - DELETE your old mine-lights-\*.jar file completely. - Download the jar from this release. - Place the new minelights-\*.jar into your mods folder. - Install Cloth Config, here: [https://modrinth.com/mod/cloth-config](https://modrinth.com/mod/cloth-config) - Run Minecraft. - Using anything which is not OpenRGB? 1. Start Minecraft. 2. Wait for MineLights.exe to finish downloading in the background. 3. If all goes well, you will see a dialog asking you if you want to grant `MineLights.exe` permission to access the internet. 4. After accepting, your supported devices will show red. ## Full Changelog & Technical Details - Replaced loader-specific About descriptions in all language files. - Made Fabric and NeoForge metadata descriptions loader-neutral, matching Quilt. - Added Minecraft 26.3 target metadata and a loader-independent client tick hook for Quilt builds from Minecraft 1.14.4 onward. - Updated Quilt dependencies and supported-version documentation.

# MineLights 2.3.8.2 This release adds native Quilt support and removes loader-specific wording from the MineLights descriptions. Previous server version compatible (as of 2.3.1)! ## Key Features & Major Changes - Updated the About description across all translations to describe MineLights as a Minecraft mod. - Updated Fabric, Quilt, and NeoForge metadata descriptions to use the same loader-neutral wording. - Added native Quilt builds from Minecraft 1.14.4 through 26.3 without a Fabric API or Quilt API library dependency. ## Installation / Upgrade Instructions - DELETE your old mine-lights-\*.jar file completely. - Download the jar from this release. - Place the new minelights-\*.jar into your mods folder. - Install Cloth Config, here: [https://modrinth.com/mod/cloth-config](https://modrinth.com/mod/cloth-config) - Run Minecraft. - Using anything which is not OpenRGB? 1. Start Minecraft. 2. Wait for MineLights.exe to finish downloading in the background. 3. If all goes well, you will see a dialog asking you if you want to grant `MineLights.exe` permission to access the internet. 4. After accepting, your supported devices will show red. ## Full Changelog & Technical Details - Replaced loader-specific About descriptions in all language files. - Made Fabric and NeoForge metadata descriptions loader-neutral, matching Quilt. - Added Minecraft 26.3 target metadata and a loader-independent client tick hook for Quilt builds from Minecraft 1.14.4 onward. - Updated Quilt dependencies and supported-version documentation.

# MineLights 2.3.8.1 Adds Minecraft 26.3 support for Fabric and NeoForge. - Added Dappled Forest biome lighting. - Fixed early-startup lighting initialization. - Fixed the NeoForge Mods screen icon and updated the About version and copyright.

# MineLights 2.3.8.1 Adds Minecraft 26.3 support for Fabric and NeoForge. - Added Dappled Forest biome lighting. - Fixed early-startup lighting initialization. - Fixed the NeoForge Mods screen icon and updated the About version and copyright.

# MineLights 2.3.8 This release adds support for Minecraft 26.2 on Fabric and NeoForge. Previous server version compatible (as of 2.3.1)! ## Key Features & Major Changes - Added Fabric and NeoForge targets for Minecraft 26.2. - Updated Fabric API, Fabric Loader, Mod Menu, Cloth Config, and NeoForge dependency coordinates for 26.2. - Fixed MineLights Server autostart sometimes stalling because the mod no longer drained the server process output stream. ## Installation / Upgrade Instructions - DELETE your old mine-lights-\*.jar file completely. - Download the jar from this release. - Place the new minelights-\*.jar into your mods folder. - Install Cloth Config, here: [https://modrinth.com/mod/cloth-config](https://modrinth.com/mod/cloth-config) - Run Minecraft. - Using anything which is not OpenRGB? 1. Start Minecraft. 2. Wait for MineLights.exe to finish downloading in the background. 3. If all goes well, you will see a dialog asking you if you want to grant `MineLights.exe` permission to access the internet. 4. After accepting, your supported devices will show red. ## Full Changelog & Technical Details - Added Minecraft 26.2 target metadata for Fabric and NeoForge. - Updated supported-version documentation to include Minecraft 26.2. - Restored MineLights.exe output draining after launch while keeping the in-game live server log UI removed.

# MineLights 2.3.8 This release adds support for Minecraft 26.2 on Fabric and NeoForge. Previous server version compatible (as of 2.3.1)! ## Key Features & Major Changes - Added Fabric and NeoForge targets for Minecraft 26.2. - Updated Fabric API, Fabric Loader, Mod Menu, Cloth Config, and NeoForge dependency coordinates for 26.2. - Fixed MineLights Server autostart sometimes stalling because the mod no longer drained the server process output stream. ## Installation / Upgrade Instructions - DELETE your old mine-lights-\*.jar file completely. - Download the jar from this release. - Place the new minelights-\*.jar into your mods folder. - Install Cloth Config, here: [https://modrinth.com/mod/cloth-config](https://modrinth.com/mod/cloth-config) - Run Minecraft. - Using anything which is not OpenRGB? 1. Start Minecraft. 2. Wait for MineLights.exe to finish downloading in the background. 3. If all goes well, you will see a dialog asking you if you want to grant `MineLights.exe` permission to access the internet. 4. After accepting, your supported devices will show red. ## Full Changelog & Technical Details - Added Minecraft 26.2 target metadata for Fabric and NeoForge. - Updated supported-version documentation to include Minecraft 26.2. - Restored MineLights.exe output draining after launch while keeping the in-game live server log UI removed.

# MineLights 2.3.8 This release adds support for Minecraft 26.2 on Fabric and NeoForge. Previous server version compatible (as of 2.3.1)! ## Key Features & Major Changes - Added Fabric and NeoForge targets for Minecraft 26.2. - Updated Fabric API, Fabric Loader, Mod Menu, Cloth Config, and NeoForge dependency coordinates for 26.2. - Fixed MineLights Server autostart sometimes stalling because the mod no longer drained the server process output stream. ## Installation / Upgrade Instructions - DELETE your old mine-lights-\*.jar file completely. - Download the jar from this release. - Place the new minelights-\*.jar into your mods folder. - Install Cloth Config, here: [https://modrinth.com/mod/cloth-config](https://modrinth.com/mod/cloth-config) - Run Minecraft. - Using anything which is not OpenRGB? 1. Start Minecraft. 2. Wait for MineLights.exe to finish downloading in the background. 3. If all goes well, you will see a dialog asking you if you want to grant `MineLights.exe` permission to access the internet. 4. After accepting, your supported devices will show red. ## Full Changelog & Technical Details - Added Minecraft 26.2 target metadata for Fabric and NeoForge. - Updated supported-version documentation to include Minecraft 26.2. - Restored MineLights.exe output draining after launch while keeping the in-game live server log UI removed.

# MineLights 2.3.8 This release adds support for Minecraft 26.2 on Fabric and NeoForge. Previous server version compatible (as of 2.3.1)! ## Key Features & Major Changes - Added Fabric and NeoForge targets for Minecraft 26.2. - Updated Fabric API, Fabric Loader, Mod Menu, Cloth Config, and NeoForge dependency coordinates for 26.2. - Fixed MineLights Server autostart sometimes stalling because the mod no longer drained the server process output stream. ## Installation / Upgrade Instructions - DELETE your old mine-lights-\*.jar file completely. - Download the jar from this release. - Place the new minelights-\*.jar into your mods folder. - Install Cloth Config, here: [https://modrinth.com/mod/cloth-config](https://modrinth.com/mod/cloth-config) - Run Minecraft. - Using anything which is not OpenRGB? 1. Start Minecraft. 2. Wait for MineLights.exe to finish downloading in the background. 3. If all goes well, you will see a dialog asking you if you want to grant `MineLights.exe` permission to access the internet. 4. After accepting, your supported devices will show red. ## Full Changelog & Technical Details - Added Minecraft 26.2 target metadata for Fabric and NeoForge. - Updated supported-version documentation to include Minecraft 26.2. - Restored MineLights.exe output draining after launch while keeping the in-game live server log UI removed.

# MineLights 2.3.8 This release adds support for Minecraft 26.2 on Fabric and NeoForge. Previous server version compatible (as of 2.3.1)! ## Key Features & Major Changes - Added Fabric and NeoForge targets for Minecraft 26.2. - Updated Fabric API, Fabric Loader, Mod Menu, Cloth Config, and NeoForge dependency coordinates for 26.2. - Fixed MineLights Server autostart sometimes stalling because the mod no longer drained the server process output stream. ## Installation / Upgrade Instructions - DELETE your old mine-lights-\*.jar file completely. - Download the jar from this release. - Place the new minelights-\*.jar into your mods folder. - Install Cloth Config, here: [https://modrinth.com/mod/cloth-config](https://modrinth.com/mod/cloth-config) - Run Minecraft. - Using anything which is not OpenRGB? 1. Start Minecraft. 2. Wait for MineLights.exe to finish downloading in the background. 3. If all goes well, you will see a dialog asking you if you want to grant `MineLights.exe` permission to access the internet. 4. After accepting, your supported devices will show red. ## Full Changelog & Technical Details - Added Minecraft 26.2 target metadata for Fabric and NeoForge. - Updated supported-version documentation to include Minecraft 26.2. - Restored MineLights.exe output draining after launch while keeping the in-game live server log UI removed.

# MineLights 2.3.8 This release adds support for Minecraft 26.2 on Fabric and NeoForge. Previous server version compatible (as of 2.3.1)! ## Key Features & Major Changes - Added Fabric and NeoForge targets for Minecraft 26.2. - Updated Fabric API, Fabric Loader, Mod Menu, Cloth Config, and NeoForge dependency coordinates for 26.2. - Fixed MineLights Server autostart sometimes stalling because the mod no longer drained the server process output stream. ## Installation / Upgrade Instructions - DELETE your old mine-lights-\*.jar file completely. - Download the jar from this release. - Place the new minelights-\*.jar into your mods folder. - Install Cloth Config, here: [https://modrinth.com/mod/cloth-config](https://modrinth.com/mod/cloth-config) - Run Minecraft. - Using anything which is not OpenRGB? 1. Start Minecraft. 2. Wait for MineLights.exe to finish downloading in the background. 3. If all goes well, you will see a dialog asking you if you want to grant `MineLights.exe` permission to access the internet. 4. After accepting, your supported devices will show red. ## Full Changelog & Technical Details - Added Minecraft 26.2 target metadata for Fabric and NeoForge. - Updated supported-version documentation to include Minecraft 26.2. - Restored MineLights.exe output draining after launch while keeping the in-game live server log UI removed.

# MineLights 2.3.8 This release adds support for Minecraft 26.2 on Fabric and NeoForge. Previous server version compatible (as of 2.3.1)! ## Key Features & Major Changes - Added Fabric and NeoForge targets for Minecraft 26.2. - Updated Fabric API, Fabric Loader, Mod Menu, Cloth Config, and NeoForge dependency coordinates for 26.2. - Fixed MineLights Server autostart sometimes stalling because the mod no longer drained the server process output stream. ## Installation / Upgrade Instructions - DELETE your old mine-lights-\*.jar file completely. - Download the jar from this release. - Place the new minelights-\*.jar into your mods folder. - Install Cloth Config, here: [https://modrinth.com/mod/cloth-config](https://modrinth.com/mod/cloth-config) - Run Minecraft. - Using anything which is not OpenRGB? 1. Start Minecraft. 2. Wait for MineLights.exe to finish downloading in the background. 3. If all goes well, you will see a dialog asking you if you want to grant `MineLights.exe` permission to access the internet. 4. After accepting, your supported devices will show red. ## Full Changelog & Technical Details - Added Minecraft 26.2 target metadata for Fabric and NeoForge. - Updated supported-version documentation to include Minecraft 26.2. - Restored MineLights.exe output draining after launch while keeping the in-game live server log UI removed.

# MineLights 2.3.8 This release adds support for Minecraft 26.2 on Fabric and NeoForge. Previous server version compatible (as of 2.3.1)! ## Key Features & Major Changes - Added Fabric and NeoForge targets for Minecraft 26.2. - Updated Fabric API, Fabric Loader, Mod Menu, Cloth Config, and NeoForge dependency coordinates for 26.2. - Fixed MineLights Server autostart sometimes stalling because the mod no longer drained the server process output stream. ## Installation / Upgrade Instructions - DELETE your old mine-lights-\*.jar file completely. - Download the jar from this release. - Place the new minelights-\*.jar into your mods folder. - Install Cloth Config, here: [https://modrinth.com/mod/cloth-config](https://modrinth.com/mod/cloth-config) - Run Minecraft. - Using anything which is not OpenRGB? 1. Start Minecraft. 2. Wait for MineLights.exe to finish downloading in the background. 3. If all goes well, you will see a dialog asking you if you want to grant `MineLights.exe` permission to access the internet. 4. After accepting, your supported devices will show red. ## Full Changelog & Technical Details - Added Minecraft 26.2 target metadata for Fabric and NeoForge. - Updated supported-version documentation to include Minecraft 26.2. - Restored MineLights.exe output draining after launch while keeping the in-game live server log UI removed.

# MineLights 2.3.8 This release adds support for Minecraft 26.2 on Fabric and NeoForge. Previous server version compatible (as of 2.3.1)! ## Key Features & Major Changes - Added Fabric and NeoForge targets for Minecraft 26.2. - Updated Fabric API, Fabric Loader, Mod Menu, Cloth Config, and NeoForge dependency coordinates for 26.2. - Fixed MineLights Server autostart sometimes stalling because the mod no longer drained the server process output stream. ## Installation / Upgrade Instructions - DELETE your old mine-lights-\*.jar file completely. - Download the jar from this release. - Place the new minelights-\*.jar into your mods folder. - Install Cloth Config, here: [https://modrinth.com/mod/cloth-config](https://modrinth.com/mod/cloth-config) - Run Minecraft. - Using anything which is not OpenRGB? 1. Start Minecraft. 2. Wait for MineLights.exe to finish downloading in the background. 3. If all goes well, you will see a dialog asking you if you want to grant `MineLights.exe` permission to access the internet. 4. After accepting, your supported devices will show red. ## Full Changelog & Technical Details - Added Minecraft 26.2 target metadata for Fabric and NeoForge. - Updated supported-version documentation to include Minecraft 26.2. - Restored MineLights.exe output draining after launch while keeping the in-game live server log UI removed.

# MineLights 2.3.8 This release adds support for Minecraft 26.2 on Fabric and NeoForge. Previous server version compatible (as of 2.3.1)! ## Key Features & Major Changes - Added Fabric and NeoForge targets for Minecraft 26.2. - Updated Fabric API, Fabric Loader, Mod Menu, Cloth Config, and NeoForge dependency coordinates for 26.2. - Fixed MineLights Server autostart sometimes stalling because the mod no longer drained the server process output stream. ## Installation / Upgrade Instructions - DELETE your old mine-lights-\*.jar file completely. - Download the jar from this release. - Place the new minelights-\*.jar into your mods folder. - Install Cloth Config, here: [https://modrinth.com/mod/cloth-config](https://modrinth.com/mod/cloth-config) - Run Minecraft. - Using anything which is not OpenRGB? 1. Start Minecraft. 2. Wait for MineLights.exe to finish downloading in the background. 3. If all goes well, you will see a dialog asking you if you want to grant `MineLights.exe` permission to access the internet. 4. After accepting, your supported devices will show red. ## Full Changelog & Technical Details - Added Minecraft 26.2 target metadata for Fabric and NeoForge. - Updated supported-version documentation to include Minecraft 26.2. - Restored MineLights.exe output draining after launch while keeping the in-game live server log UI removed.

# MineLights 2.3.8 This release adds support for Minecraft 26.2 on Fabric and NeoForge. Previous server version compatible (as of 2.3.1)! ## Key Features & Major Changes - Added Fabric and NeoForge targets for Minecraft 26.2. - Updated Fabric API, Fabric Loader, Mod Menu, Cloth Config, and NeoForge dependency coordinates for 26.2. - Fixed MineLights Server autostart sometimes stalling because the mod no longer drained the server process output stream. ## Installation / Upgrade Instructions - DELETE your old mine-lights-\*.jar file completely. - Download the jar from this release. - Place the new minelights-\*.jar into your mods folder. - Install Cloth Config, here: [https://modrinth.com/mod/cloth-config](https://modrinth.com/mod/cloth-config) - Run Minecraft. - Using anything which is not OpenRGB? 1. Start Minecraft. 2. Wait for MineLights.exe to finish downloading in the background. 3. If all goes well, you will see a dialog asking you if you want to grant `MineLights.exe` permission to access the internet. 4. After accepting, your supported devices will show red. ## Full Changelog & Technical Details - Added Minecraft 26.2 target metadata for Fabric and NeoForge. - Updated supported-version documentation to include Minecraft 26.2. - Restored MineLights.exe output draining after launch while keeping the in-game live server log UI removed.

# MineLights 2.3.8 This release adds support for Minecraft 26.2 on Fabric and NeoForge. Previous server version compatible (as of 2.3.1)! ## Key Features & Major Changes - Added Fabric and NeoForge targets for Minecraft 26.2. - Updated Fabric API, Fabric Loader, Mod Menu, Cloth Config, and NeoForge dependency coordinates for 26.2. - Fixed MineLights Server autostart sometimes stalling because the mod no longer drained the server process output stream. ## Installation / Upgrade Instructions - DELETE your old mine-lights-\*.jar file completely. - Download the jar from this release. - Place the new minelights-\*.jar into your mods folder. - Install Cloth Config, here: [https://modrinth.com/mod/cloth-config](https://modrinth.com/mod/cloth-config) - Run Minecraft. - Using anything which is not OpenRGB? 1. Start Minecraft. 2. Wait for MineLights.exe to finish downloading in the background. 3. If all goes well, you will see a dialog asking you if you want to grant `MineLights.exe` permission to access the internet. 4. After accepting, your supported devices will show red. ## Full Changelog & Technical Details - Added Minecraft 26.2 target metadata for Fabric and NeoForge. - Updated supported-version documentation to include Minecraft 26.2. - Restored MineLights.exe output draining after launch while keeping the in-game live server log UI removed.

# MineLights 2.3.8 This release adds support for Minecraft 26.2 on Fabric and NeoForge. Previous server version compatible (as of 2.3.1)! ## Key Features & Major Changes - Added Fabric and NeoForge targets for Minecraft 26.2. - Updated Fabric API, Fabric Loader, Mod Menu, Cloth Config, and NeoForge dependency coordinates for 26.2. - Fixed MineLights Server autostart sometimes stalling because the mod no longer drained the server process output stream. ## Installation / Upgrade Instructions - DELETE your old mine-lights-\*.jar file completely. - Download the jar from this release. - Place the new minelights-\*.jar into your mods folder. - Install Cloth Config, here: [https://modrinth.com/mod/cloth-config](https://modrinth.com/mod/cloth-config) - Run Minecraft. - Using anything which is not OpenRGB? 1. Start Minecraft. 2. Wait for MineLights.exe to finish downloading in the background. 3. If all goes well, you will see a dialog asking you if you want to grant `MineLights.exe` permission to access the internet. 4. After accepting, your supported devices will show red. ## Full Changelog & Technical Details - Added Minecraft 26.2 target metadata for Fabric and NeoForge. - Updated supported-version documentation to include Minecraft 26.2. - Restored MineLights.exe output draining after launch while keeping the in-game live server log UI removed.

# MineLights 2.3.8 This release adds support for Minecraft 26.2 on Fabric and NeoForge. Previous server version compatible (as of 2.3.1)! ## Key Features & Major Changes - Added Fabric and NeoForge targets for Minecraft 26.2. - Updated Fabric API, Fabric Loader, Mod Menu, Cloth Config, and NeoForge dependency coordinates for 26.2. - Fixed MineLights Server autostart sometimes stalling because the mod no longer drained the server process output stream. ## Installation / Upgrade Instructions - DELETE your old mine-lights-\*.jar file completely. - Download the jar from this release. - Place the new minelights-\*.jar into your mods folder. - Install Cloth Config, here: [https://modrinth.com/mod/cloth-config](https://modrinth.com/mod/cloth-config) - Run Minecraft. - Using anything which is not OpenRGB? 1. Start Minecraft. 2. Wait for MineLights.exe to finish downloading in the background. 3. If all goes well, you will see a dialog asking you if you want to grant `MineLights.exe` permission to access the internet. 4. After accepting, your supported devices will show red. ## Full Changelog & Technical Details - Added Minecraft 26.2 target metadata for Fabric and NeoForge. - Updated supported-version documentation to include Minecraft 26.2. - Restored MineLights.exe output draining after launch while keeping the in-game live server log UI removed.

# MineLights 2.3.8 This release adds support for Minecraft 26.2 on Fabric and NeoForge. Previous server version compatible (as of 2.3.1)! ## Key Features & Major Changes - Added Fabric and NeoForge targets for Minecraft 26.2. - Updated Fabric API, Fabric Loader, Mod Menu, Cloth Config, and NeoForge dependency coordinates for 26.2. - Fixed MineLights Server autostart sometimes stalling because the mod no longer drained the server process output stream. ## Installation / Upgrade Instructions - DELETE your old mine-lights-\*.jar file completely. - Download the jar from this release. - Place the new minelights-\*.jar into your mods folder. - Install Cloth Config, here: [https://modrinth.com/mod/cloth-config](https://modrinth.com/mod/cloth-config) - Run Minecraft. - Using anything which is not OpenRGB? 1. Start Minecraft. 2. Wait for MineLights.exe to finish downloading in the background. 3. If all goes well, you will see a dialog asking you if you want to grant `MineLights.exe` permission to access the internet. 4. After accepting, your supported devices will show red. ## Full Changelog & Technical Details - Added Minecraft 26.2 target metadata for Fabric and NeoForge. - Updated supported-version documentation to include Minecraft 26.2. - Restored MineLights.exe output draining after launch while keeping the in-game live server log UI removed.

# MineLights 2.3.8 This release adds support for Minecraft 26.2 on Fabric and NeoForge. Previous server version compatible (as of 2.3.1)! ## Key Features & Major Changes - Added Fabric and NeoForge targets for Minecraft 26.2. - Updated Fabric API, Fabric Loader, Mod Menu, Cloth Config, and NeoForge dependency coordinates for 26.2. - Fixed MineLights Server autostart sometimes stalling because the mod no longer drained the server process output stream. ## Installation / Upgrade Instructions - DELETE your old mine-lights-\*.jar file completely. - Download the jar from this release. - Place the new minelights-\*.jar into your mods folder. - Install Cloth Config, here: [https://modrinth.com/mod/cloth-config](https://modrinth.com/mod/cloth-config) - Run Minecraft. - Using anything which is not OpenRGB? 1. Start Minecraft. 2. Wait for MineLights.exe to finish downloading in the background. 3. If all goes well, you will see a dialog asking you if you want to grant `MineLights.exe` permission to access the internet. 4. After accepting, your supported devices will show red. ## Full Changelog & Technical Details - Added Minecraft 26.2 target metadata for Fabric and NeoForge. - Updated supported-version documentation to include Minecraft 26.2. - Restored MineLights.exe output draining after launch while keeping the in-game live server log UI removed.

# MineLights 2.3.8 This release adds support for Minecraft 26.2 on Fabric and NeoForge. Previous server version compatible (as of 2.3.1)! ## Key Features & Major Changes - Added Fabric and NeoForge targets for Minecraft 26.2. - Updated Fabric API, Fabric Loader, Mod Menu, Cloth Config, and NeoForge dependency coordinates for 26.2. - Fixed MineLights Server autostart sometimes stalling because the mod no longer drained the server process output stream. ## Installation / Upgrade Instructions - DELETE your old mine-lights-\*.jar file completely. - Download the jar from this release. - Place the new minelights-\*.jar into your mods folder. - Install Cloth Config, here: [https://modrinth.com/mod/cloth-config](https://modrinth.com/mod/cloth-config) - Run Minecraft. - Using anything which is not OpenRGB? 1. Start Minecraft. 2. Wait for MineLights.exe to finish downloading in the background. 3. If all goes well, you will see a dialog asking you if you want to grant `MineLights.exe` permission to access the internet. 4. After accepting, your supported devices will show red. ## Full Changelog & Technical Details - Added Minecraft 26.2 target metadata for Fabric and NeoForge. - Updated supported-version documentation to include Minecraft 26.2. - Restored MineLights.exe output draining after launch while keeping the in-game live server log UI removed.

# MineLights 2.3.8 This release adds support for Minecraft 26.2 on Fabric and NeoForge. Previous server version compatible (as of 2.3.1)! ## Key Features & Major Changes - Added Fabric and NeoForge targets for Minecraft 26.2. - Updated Fabric API, Fabric Loader, Mod Menu, Cloth Config, and NeoForge dependency coordinates for 26.2. - Fixed MineLights Server autostart sometimes stalling because the mod no longer drained the server process output stream. ## Installation / Upgrade Instructions - DELETE your old mine-lights-\*.jar file completely. - Download the jar from this release. - Place the new minelights-\*.jar into your mods folder. - Install Cloth Config, here: [https://modrinth.com/mod/cloth-config](https://modrinth.com/mod/cloth-config) - Run Minecraft. - Using anything which is not OpenRGB? 1. Start Minecraft. 2. Wait for MineLights.exe to finish downloading in the background. 3. If all goes well, you will see a dialog asking you if you want to grant `MineLights.exe` permission to access the internet. 4. After accepting, your supported devices will show red. ## Full Changelog & Technical Details - Added Minecraft 26.2 target metadata for Fabric and NeoForge. - Updated supported-version documentation to include Minecraft 26.2. - Restored MineLights.exe output draining after launch while keeping the in-game live server log UI removed.

# MineLights 2.3.8 This release adds support for Minecraft 26.2 on Fabric and NeoForge. Previous server version compatible (as of 2.3.1)! ## Key Features & Major Changes - Added Fabric and NeoForge targets for Minecraft 26.2. - Updated Fabric API, Fabric Loader, Mod Menu, Cloth Config, and NeoForge dependency coordinates for 26.2. - Fixed MineLights Server autostart sometimes stalling because the mod no longer drained the server process output stream. ## Installation / Upgrade Instructions - DELETE your old mine-lights-\*.jar file completely. - Download the jar from this release. - Place the new minelights-\*.jar into your mods folder. - Install Cloth Config, here: [https://modrinth.com/mod/cloth-config](https://modrinth.com/mod/cloth-config) - Run Minecraft. - Using anything which is not OpenRGB? 1. Start Minecraft. 2. Wait for MineLights.exe to finish downloading in the background. 3. If all goes well, you will see a dialog asking you if you want to grant `MineLights.exe` permission to access the internet. 4. After accepting, your supported devices will show red. ## Full Changelog & Technical Details - Added Minecraft 26.2 target metadata for Fabric and NeoForge. - Updated supported-version documentation to include Minecraft 26.2. - Restored MineLights.exe output draining after launch while keeping the in-game live server log UI removed.

# MineLights 2.3.8 This release adds support for Minecraft 26.2 on Fabric and NeoForge. Previous server version compatible (as of 2.3.1)! ## Key Features & Major Changes - Added Fabric and NeoForge targets for Minecraft 26.2. - Updated Fabric API, Fabric Loader, Mod Menu, Cloth Config, and NeoForge dependency coordinates for 26.2. - Fixed MineLights Server autostart sometimes stalling because the mod no longer drained the server process output stream. ## Installation / Upgrade Instructions - DELETE your old mine-lights-\*.jar file completely. - Download the jar from this release. - Place the new minelights-\*.jar into your mods folder. - Install Cloth Config, here: [https://modrinth.com/mod/cloth-config](https://modrinth.com/mod/cloth-config) - Run Minecraft. - Using anything which is not OpenRGB? 1. Start Minecraft. 2. Wait for MineLights.exe to finish downloading in the background. 3. If all goes well, you will see a dialog asking you if you want to grant `MineLights.exe` permission to access the internet. 4. After accepting, your supported devices will show red. ## Full Changelog & Technical Details - Added Minecraft 26.2 target metadata for Fabric and NeoForge. - Updated supported-version documentation to include Minecraft 26.2. - Restored MineLights.exe output draining after launch while keeping the in-game live server log UI removed.

# MineLights 2.3.8 This release adds support for Minecraft 26.2 on Fabric and NeoForge. Previous server version compatible (as of 2.3.1)! ## Key Features & Major Changes - Added Fabric and NeoForge targets for Minecraft 26.2. - Updated Fabric API, Fabric Loader, Mod Menu, Cloth Config, and NeoForge dependency coordinates for 26.2. - Fixed MineLights Server autostart sometimes stalling because the mod no longer drained the server process output stream. ## Installation / Upgrade Instructions - DELETE your old mine-lights-\*.jar file completely. - Download the jar from this release. - Place the new minelights-\*.jar into your mods folder. - Install Cloth Config, here: [https://modrinth.com/mod/cloth-config](https://modrinth.com/mod/cloth-config) - Run Minecraft. - Using anything which is not OpenRGB? 1. Start Minecraft. 2. Wait for MineLights.exe to finish downloading in the background. 3. If all goes well, you will see a dialog asking you if you want to grant `MineLights.exe` permission to access the internet. 4. After accepting, your supported devices will show red. ## Full Changelog & Technical Details - Added Minecraft 26.2 target metadata for Fabric and NeoForge. - Updated supported-version documentation to include Minecraft 26.2. - Restored MineLights.exe output draining after launch while keeping the in-game live server log UI removed.

# MineLights 2.3.8 This release adds support for Minecraft 26.2 on Fabric and NeoForge. Previous server version compatible (as of 2.3.1)! ## Key Features & Major Changes - Added Fabric and NeoForge targets for Minecraft 26.2. - Updated Fabric API, Fabric Loader, Mod Menu, Cloth Config, and NeoForge dependency coordinates for 26.2. - Fixed MineLights Server autostart sometimes stalling because the mod no longer drained the server process output stream. ## Installation / Upgrade Instructions - DELETE your old mine-lights-\*.jar file completely. - Download the jar from this release. - Place the new minelights-\*.jar into your mods folder. - Install Cloth Config, here: [https://modrinth.com/mod/cloth-config](https://modrinth.com/mod/cloth-config) - Run Minecraft. - Using anything which is not OpenRGB? 1. Start Minecraft. 2. Wait for MineLights.exe to finish downloading in the background. 3. If all goes well, you will see a dialog asking you if you want to grant `MineLights.exe` permission to access the internet. 4. After accepting, your supported devices will show red. ## Full Changelog & Technical Details - Added Minecraft 26.2 target metadata for Fabric and NeoForge. - Updated supported-version documentation to include Minecraft 26.2. - Restored MineLights.exe output draining after launch while keeping the in-game live server log UI removed.

# MineLights 2.3.8 This release adds support for Minecraft 26.2 on Fabric and NeoForge. Previous server version compatible (as of 2.3.1)! ## Key Features & Major Changes - Added Fabric and NeoForge targets for Minecraft 26.2. - Updated Fabric API, Fabric Loader, Mod Menu, Cloth Config, and NeoForge dependency coordinates for 26.2. - Fixed MineLights Server autostart sometimes stalling because the mod no longer drained the server process output stream. ## Installation / Upgrade Instructions - DELETE your old mine-lights-\*.jar file completely. - Download the jar from this release. - Place the new minelights-\*.jar into your mods folder. - Install Cloth Config, here: [https://modrinth.com/mod/cloth-config](https://modrinth.com/mod/cloth-config) - Run Minecraft. - Using anything which is not OpenRGB? 1. Start Minecraft. 2. Wait for MineLights.exe to finish downloading in the background. 3. If all goes well, you will see a dialog asking you if you want to grant `MineLights.exe` permission to access the internet. 4. After accepting, your supported devices will show red. ## Full Changelog & Technical Details - Added Minecraft 26.2 target metadata for Fabric and NeoForge. - Updated supported-version documentation to include Minecraft 26.2. - Restored MineLights.exe output draining after launch while keeping the in-game live server log UI removed.

# MineLights 2.3.7 This release adds support for NeoForge, from 1.20.2 - 26.1.2. Previous server version compatible (as of 2.3.1)! ## Key Features & Major Changes - Added support for NeoForge 1.20.2 - 26.1.2. - Core project restructure to new multiloader setup ## Installation / Upgrade Instructions - DELETE your old mine-lights-\*.jar file completely. - Download the jar from this release. - Place the new minelights-\*.jar into your mods folder. - Install Cloth Config, here: [https://modrinth.com/mod/cloth-config](https://modrinth.com/mod/cloth-config) - Run Minecraft. - Using anything which is not OpenRGB? 1. Start Minecraft. 2. Wait for MineLights.exe to finish downloading in the background. 3. If all goes well, you will see a dialog asking you if you want to grant `MineLights.exe` permission to access the internet. 4. After accepting, your supported devices will show red. ## Full Changelog & Technical Details - Added support for NeoForge 1.20.2 - 26.1.2. - Core project restructured to new multiloader setup.

# MineLights 2.3.7 This release adds support for NeoForge, from 1.20.2 - 26.1.2. Previous server version compatible (as of 2.3.1)! ## Key Features & Major Changes - Added support for NeoForge 1.20.2 - 26.1.2. - Core project restructure to new multiloader setup ## Installation / Upgrade Instructions - DELETE your old mine-lights-\*.jar file completely. - Download the jar from this release. - Place the new minelights-\*.jar into your mods folder. - Install Cloth Config, here: [https://modrinth.com/mod/cloth-config](https://modrinth.com/mod/cloth-config) - Run Minecraft. - Using anything which is not OpenRGB? 1. Start Minecraft. 2. Wait for MineLights.exe to finish downloading in the background. 3. If all goes well, you will see a dialog asking you if you want to grant `MineLights.exe` permission to access the internet. 4. After accepting, your supported devices will show red. ## Full Changelog & Technical Details - Added support for NeoForge 1.20.2 - 26.1.2. - Core project restructured to new multiloader setup.

# MineLights 2.3.7 This release adds support for NeoForge, from 1.20.2 - 26.1.2. Previous server version compatible (as of 2.3.1)! ## Key Features & Major Changes - Added support for NeoForge 1.20.2 - 26.1.2. - Core project restructure to new multiloader setup ## Installation / Upgrade Instructions - DELETE your old mine-lights-\*.jar file completely. - Download the jar from this release. - Place the new minelights-\*.jar into your mods folder. - Install Cloth Config, here: [https://modrinth.com/mod/cloth-config](https://modrinth.com/mod/cloth-config) - Run Minecraft. - Using anything which is not OpenRGB? 1. Start Minecraft. 2. Wait for MineLights.exe to finish downloading in the background. 3. If all goes well, you will see a dialog asking you if you want to grant `MineLights.exe` permission to access the internet. 4. After accepting, your supported devices will show red. ## Full Changelog & Technical Details - Added support for NeoForge 1.20.2 - 26.1.2. - Core project restructured to new multiloader setup.

# MineLights 2.3.7 This release adds support for NeoForge, from 1.20.2 - 26.1.2. Previous server version compatible (as of 2.3.1)! ## Key Features & Major Changes - Added support for NeoForge 1.20.2 - 26.1.2. - Core project restructure to new multiloader setup ## Installation / Upgrade Instructions - DELETE your old mine-lights-\*.jar file completely. - Download the jar from this release. - Place the new minelights-\*.jar into your mods folder. - Install Cloth Config, here: [https://modrinth.com/mod/cloth-config](https://modrinth.com/mod/cloth-config) - Run Minecraft. - Using anything which is not OpenRGB? 1. Start Minecraft. 2. Wait for MineLights.exe to finish downloading in the background. 3. If all goes well, you will see a dialog asking you if you want to grant `MineLights.exe` permission to access the internet. 4. After accepting, your supported devices will show red. ## Full Changelog & Technical Details - Added support for NeoForge 1.20.2 - 26.1.2. - Core project restructured to new multiloader setup.

# MineLights 2.3.7 This release adds support for NeoForge, from 1.20.2 - 26.1.2. Previous server version compatible (as of 2.3.1)! ## Key Features & Major Changes - Added support for NeoForge 1.20.2 - 26.1.2. - Core project restructure to new multiloader setup ## Installation / Upgrade Instructions - DELETE your old mine-lights-\*.jar file completely. - Download the jar from this release. - Place the new minelights-\*.jar into your mods folder. - Install Cloth Config, here: [https://modrinth.com/mod/cloth-config](https://modrinth.com/mod/cloth-config) - Run Minecraft. - Using anything which is not OpenRGB? 1. Start Minecraft. 2. Wait for MineLights.exe to finish downloading in the background. 3. If all goes well, you will see a dialog asking you if you want to grant `MineLights.exe` permission to access the internet. 4. After accepting, your supported devices will show red. ## Full Changelog & Technical Details - Added support for NeoForge 1.20.2 - 26.1.2. - Core project restructured to new multiloader setup.

# MineLights 2.3.7 This release adds support for NeoForge, from 1.20.2 - 26.1.2. Previous server version compatible (as of 2.3.1)! ## Key Features & Major Changes - Added support for NeoForge 1.20.2 - 26.1.2. - Core project restructure to new multiloader setup ## Installation / Upgrade Instructions - DELETE your old mine-lights-\*.jar file completely. - Download the jar from this release. - Place the new minelights-\*.jar into your mods folder. - Install Cloth Config, here: [https://modrinth.com/mod/cloth-config](https://modrinth.com/mod/cloth-config) - Run Minecraft. - Using anything which is not OpenRGB? 1. Start Minecraft. 2. Wait for MineLights.exe to finish downloading in the background. 3. If all goes well, you will see a dialog asking you if you want to grant `MineLights.exe` permission to access the internet. 4. After accepting, your supported devices will show red. ## Full Changelog & Technical Details - Added support for NeoForge 1.20.2 - 26.1.2. - Core project restructured to new multiloader setup.

# MineLights 2.3.7 This release adds support for NeoForge, from 1.20.2 - 26.1.2. Previous server version compatible (as of 2.3.1)! ## Key Features & Major Changes - Added support for NeoForge 1.20.2 - 26.1.2. - Core project restructure to new multiloader setup ## Installation / Upgrade Instructions - DELETE your old mine-lights-\*.jar file completely. - Download the jar from this release. - Place the new minelights-\*.jar into your mods folder. - Install Cloth Config, here: [https://modrinth.com/mod/cloth-config](https://modrinth.com/mod/cloth-config) - Run Minecraft. - Using anything which is not OpenRGB? 1. Start Minecraft. 2. Wait for MineLights.exe to finish downloading in the background. 3. If all goes well, you will see a dialog asking you if you want to grant `MineLights.exe` permission to access the internet. 4. After accepting, your supported devices will show red. ## Full Changelog & Technical Details - Added support for NeoForge 1.20.2 - 26.1.2. - Core project restructured to new multiloader setup.

# MineLights 2.3.7 This release adds support for NeoForge, from 1.20.2 - 26.1.2. Previous server version compatible (as of 2.3.1)! ## Key Features & Major Changes - Added support for NeoForge 1.20.2 - 26.1.2. - Core project restructure to new multiloader setup ## Installation / Upgrade Instructions - DELETE your old mine-lights-\*.jar file completely. - Download the jar from this release. - Place the new minelights-\*.jar into your mods folder. - Install Cloth Config, here: [https://modrinth.com/mod/cloth-config](https://modrinth.com/mod/cloth-config) - Run Minecraft. - Using anything which is not OpenRGB? 1. Start Minecraft. 2. Wait for MineLights.exe to finish downloading in the background. 3. If all goes well, you will see a dialog asking you if you want to grant `MineLights.exe` permission to access the internet. 4. After accepting, your supported devices will show red. ## Full Changelog & Technical Details - Added support for NeoForge 1.20.2 - 26.1.2. - Core project restructured to new multiloader setup.

# MineLights 2.3.7 This release adds support for NeoForge, from 1.20.2 - 26.1.2. Previous server version compatible (as of 2.3.1)! ## Key Features & Major Changes - Added support for NeoForge 1.20.2 - 26.1.2. - Core project restructure to new multiloader setup ## Installation / Upgrade Instructions - DELETE your old mine-lights-\*.jar file completely. - Download the jar from this release. - Place the new minelights-\*.jar into your mods folder. - Install Cloth Config, here: [https://modrinth.com/mod/cloth-config](https://modrinth.com/mod/cloth-config) - Run Minecraft. - Using anything which is not OpenRGB? 1. Start Minecraft. 2. Wait for MineLights.exe to finish downloading in the background. 3. If all goes well, you will see a dialog asking you if you want to grant `MineLights.exe` permission to access the internet. 4. After accepting, your supported devices will show red. ## Full Changelog & Technical Details - Added support for NeoForge 1.20.2 - 26.1.2. - Core project restructured to new multiloader setup.

# MineLights 2.3.7 This release adds support for NeoForge, from 1.20.2 - 26.1.2. Previous server version compatible (as of 2.3.1)! ## Key Features & Major Changes - Added support for NeoForge 1.20.2 - 26.1.2. - Core project restructure to new multiloader setup ## Installation / Upgrade Instructions - DELETE your old mine-lights-\*.jar file completely. - Download the jar from this release. - Place the new minelights-\*.jar into your mods folder. - Install Cloth Config, here: [https://modrinth.com/mod/cloth-config](https://modrinth.com/mod/cloth-config) - Run Minecraft. - Using anything which is not OpenRGB? 1. Start Minecraft. 2. Wait for MineLights.exe to finish downloading in the background. 3. If all goes well, you will see a dialog asking you if you want to grant `MineLights.exe` permission to access the internet. 4. After accepting, your supported devices will show red. ## Full Changelog & Technical Details - Added support for NeoForge 1.20.2 - 26.1.2. - Core project restructured to new multiloader setup.

# MineLights 2.3.7 This release adds support for NeoForge, from 1.20.2 - 26.1.2. Previous server version compatible (as of 2.3.1)! ## Key Features & Major Changes - Added support for NeoForge 1.20.2 - 26.1.2. - Core project restructure to new multiloader setup ## Installation / Upgrade Instructions - DELETE your old mine-lights-\*.jar file completely. - Download the jar from this release. - Place the new minelights-\*.jar into your mods folder. - Install Cloth Config, here: [https://modrinth.com/mod/cloth-config](https://modrinth.com/mod/cloth-config) - Run Minecraft. - Using anything which is not OpenRGB? 1. Start Minecraft. 2. Wait for MineLights.exe to finish downloading in the background. 3. If all goes well, you will see a dialog asking you if you want to grant `MineLights.exe` permission to access the internet. 4. After accepting, your supported devices will show red. ## Full Changelog & Technical Details - Added support for NeoForge 1.20.2 - 26.1.2. - Core project restructured to new multiloader setup.

# MineLights 2.3.7 This release adds support for NeoForge, from 1.20.2 - 26.1.2. Previous server version compatible (as of 2.3.1)! ## Key Features & Major Changes - Added support for NeoForge 1.20.2 - 26.1.2. - Core project restructure to new multiloader setup ## Installation / Upgrade Instructions - DELETE your old mine-lights-\*.jar file completely. - Download the jar from this release. - Place the new minelights-\*.jar into your mods folder. - Install Cloth Config, here: [https://modrinth.com/mod/cloth-config](https://modrinth.com/mod/cloth-config) - Run Minecraft. - Using anything which is not OpenRGB? 1. Start Minecraft. 2. Wait for MineLights.exe to finish downloading in the background. 3. If all goes well, you will see a dialog asking you if you want to grant `MineLights.exe` permission to access the internet. 4. After accepting, your supported devices will show red. ## Full Changelog & Technical Details - Added support for NeoForge 1.20.2 - 26.1.2. - Core project restructured to new multiloader setup.

# MineLights 2.3.7 This release adds support for NeoForge, from 1.20.2 - 26.1.2. Previous server version compatible (as of 2.3.1)! ## Key Features & Major Changes - Added support for NeoForge 1.20.2 - 26.1.2. - Core project restructure to new multiloader setup ## Installation / Upgrade Instructions - DELETE your old mine-lights-\*.jar file completely. - Download the jar from this release. - Place the new minelights-\*.jar into your mods folder. - Install Cloth Config, here: [https://modrinth.com/mod/cloth-config](https://modrinth.com/mod/cloth-config) - Run Minecraft. - Using anything which is not OpenRGB? 1. Start Minecraft. 2. Wait for MineLights.exe to finish downloading in the background. 3. If all goes well, you will see a dialog asking you if you want to grant `MineLights.exe` permission to access the internet. 4. After accepting, your supported devices will show red. ## Full Changelog & Technical Details - Added support for NeoForge 1.20.2 - 26.1.2. - Core project restructured to new multiloader setup.

# MineLights 2.3.7 This release adds support for NeoForge, from 1.20.2 - 26.1.2. Previous server version compatible (as of 2.3.1)! ## Key Features & Major Changes - Added support for NeoForge 1.20.2 - 26.1.2. - Core project restructure to new multiloader setup ## Installation / Upgrade Instructions - DELETE your old mine-lights-\*.jar file completely. - Download the jar from this release. - Place the new minelights-\*.jar into your mods folder. - Install Cloth Config, here: [https://modrinth.com/mod/cloth-config](https://modrinth.com/mod/cloth-config) - Run Minecraft. - Using anything which is not OpenRGB? 1. Start Minecraft. 2. Wait for MineLights.exe to finish downloading in the background. 3. If all goes well, you will see a dialog asking you if you want to grant `MineLights.exe` permission to access the internet. 4. After accepting, your supported devices will show red. ## Full Changelog & Technical Details - Added support for NeoForge 1.20.2 - 26.1.2. - Core project restructured to new multiloader setup.

# MineLights 2.3.7 This release adds support for NeoForge, from 1.20.2 - 26.1.2. Previous server version compatible (as of 2.3.1)! ## Key Features & Major Changes - Added support for NeoForge 1.20.2 - 26.1.2. - Core project restructure to new multiloader setup ## Installation / Upgrade Instructions - DELETE your old mine-lights-\*.jar file completely. - Download the jar from this release. - Place the new minelights-\*.jar into your mods folder. - Install Cloth Config, here: [https://modrinth.com/mod/cloth-config](https://modrinth.com/mod/cloth-config) - Run Minecraft. - Using anything which is not OpenRGB? 1. Start Minecraft. 2. Wait for MineLights.exe to finish downloading in the background. 3. If all goes well, you will see a dialog asking you if you want to grant `MineLights.exe` permission to access the internet. 4. After accepting, your supported devices will show red. ## Full Changelog & Technical Details - Added support for NeoForge 1.20.2 - 26.1.2. - Core project restructured to new multiloader setup.

# MineLights 2.3.7 This release adds support for NeoForge, from 1.20.2 - 26.1.2. Previous server version compatible (as of 2.3.1)! ## Key Features & Major Changes - Added support for NeoForge 1.20.2 - 26.1.2. - Core project restructure to new multiloader setup ## Installation / Upgrade Instructions - DELETE your old mine-lights-\*.jar file completely. - Download the jar from this release. - Place the new minelights-\*.jar into your mods folder. - Install Cloth Config, here: [https://modrinth.com/mod/cloth-config](https://modrinth.com/mod/cloth-config) - Run Minecraft. - Using anything which is not OpenRGB? 1. Start Minecraft. 2. Wait for MineLights.exe to finish downloading in the background. 3. If all goes well, you will see a dialog asking you if you want to grant `MineLights.exe` permission to access the internet. 4. After accepting, your supported devices will show red. ## Full Changelog & Technical Details - Added support for NeoForge 1.20.2 - 26.1.2. - Core project restructured to new multiloader setup.