ВЕРСИИ (60)

## [1.3.0+1.20.1] - 2026-10-03 ### Added - **Attachment** block version of Redstone Transmitter/Receiver and P2P Redstone Transmitter/Receiver - Configurable Attachment Mode: Define if the attachment block shall receive/output redstone only from/to the attached block or also all adjacent ones (except the opposite of the attached side) - Target is shown underneath the crosshair when a P2P block is looked at with a **Linker** - Frequency items show a message after a frequency has been copied or set ### Changed - Receivers are now updated immediately after a transmitter is (un)powered (before: 1 redstone tick delay) - This also allows to send 1 game ticks to receivers (e.g. with an observer) - Use int array tag (NBT) for storing block positions (transmitters, p2p link, ...) - This change is *only* backwards compatible (i.e., you can upgrade to newer versions but going back to older one will break the redstone network) - Improved names and descriptions in config screen - Redstone transmitters and receivers now also update directly after block placement (also with `/setblock` and `/fill` command) - If you place a transmitter with a frequency (e.g., picked up in creative with CTRL, it also shows the frequency in the tooltip), it will now correctly register itself in the redstone ether network, before it did not do that - If you place a receiver with a frequency it will turn on if any transmitters on the frequency are on - Note: Frequency receivers (transmitters not) now also work when relocated with frames from project-red ### Fixed - Sniffer stack size is supposed to be 1 - Sniffer and target highlight render wobbling when far out in the world due to floating point number precision (the farther out, the bigger the wobble) - P2P transmitter and receiver block entities not updating data correctly - **Fabric**: - Wrong mixin configuration (was only registered on the client, oops) - Redstone wire not connecting to transmitters and receivers (if played on server) - Frequency activated with remote stayed on if: - Switching to another item in hotbar - Dropped by player (if played on server) - Normal usage (releasing right mouse button, if played on server) [1.3.0+1.20.1]: https://github.com/Razzokk/wireless-redstone/compare/v1.2.2+1.20.1...v1.3.0+1.20.1

## [1.3.0+1.20.1] - 2026-10-03 ### Added - **Attachment** block version of Redstone Transmitter/Receiver and P2P Redstone Transmitter/Receiver - Configurable Attachment Mode: Define if the attachment block shall receive/output redstone only from/to the attached block or also all adjacent ones (except the opposite of the attached side) - Target is shown underneath the crosshair when a P2P block is looked at with a **Linker** - Frequency items show a message after a frequency has been copied or set ### Changed - Receivers are now updated immediately after a transmitter is (un)powered (before: 1 redstone tick delay) - This also allows to send 1 game ticks to receivers (e.g. with an observer) - Use int array tag (NBT) for storing block positions (transmitters, p2p link, ...) - This change is *only* backwards compatible (i.e., you can upgrade to newer versions but going back to older one will break the redstone network) - Improved names and descriptions in config screen - Redstone transmitters and receivers now also update directly after block placement (also with `/setblock` and `/fill` command) - If you place a transmitter with a frequency (e.g., picked up in creative with CTRL, it also shows the frequency in the tooltip), it will now correctly register itself in the redstone ether network, before it did not do that - If you place a receiver with a frequency it will turn on if any transmitters on the frequency are on - Note: Frequency receivers (transmitters not) now also work when relocated with frames from project-red ### Fixed - Sniffer stack size is supposed to be 1 - Sniffer and target highlight render wobbling when far out in the world due to floating point number precision (the farther out, the bigger the wobble) - P2P transmitter and receiver block entities not updating data correctly - **Fabric**: - Wrong mixin configuration (was only registered on the client, oops) - Redstone wire not connecting to transmitters and receivers (if played on server) - Frequency activated with remote stayed on if: - Switching to another item in hotbar - Dropped by player (if played on server) - Normal usage (releasing right mouse button, if played on server) [1.3.0+1.20.1]: https://github.com/Razzokk/wireless-redstone/compare/v1.2.2+1.20.1...v1.3.0+1.20.1

## [1.3.0+1.20.4] - 2026-10-03 ### Added - **Attachment** block version of Redstone Transmitter/Receiver and P2P Redstone Transmitter/Receiver - Configurable Attachment Mode: Define if the attachment block shall receive/output redstone only from/to the attached block or also all adjacent ones (except the opposite of the attached side) - Target is shown underneath the crosshair when a P2P block is looked at with a **Linker** - Frequency items show a message after a frequency has been copied or set ### Changed - Receivers are now updated immediately after a transmitter is (un)powered (before: 1 redstone tick delay) - This also allows to send 1 game ticks to receivers (e.g. with an observer) - Use int array tag (NBT) for storing block positions (transmitters, p2p link, ...) - This change is *only* backwards compatible (i.e., you can upgrade to newer versions but going back to older one will break the redstone network) - Improved names and descriptions in config screen - Redstone transmitters and receivers now also update directly after block placement (also with `/setblock` and `/fill` command) - If you place a transmitter with a frequency (e.g., picked up in creative with CTRL, it also shows the frequency in the tooltip), it will now correctly register itself in the redstone ether network, before it did not do that - If you place a receiver with a frequency it will turn on if any transmitters on the frequency are on - Note: Frequency receivers (transmitters not) now also work when relocated with frames from project-red ### Fixed - Sniffer stack size is supposed to be 1 - Sniffer and target highlight render wobbling when far out in the world due to floating point number precision (the farther out, the bigger the wobble) - P2P transmitter and receiver block entities not updating data correctly - Fabric: - Wrong mixin configuration (was only registered on the client, oops) - Redstone wire not connecting to transmitters and receivers (if played on server) - Frequency activated with remote stayed on if: - Switching to another item in hotbar - Dropped by player (if played on server) - Normal usage (releasing right mouse button, if played on server) - Forge (**1.20.4**): - Minecraft startup crash with forge version of the mod (used invalid unobfuscated jar) - Affected versions (**1.2.0**, **1.2.1**, **1.2.2**) [1.3.0+1.20.4]: https://github.com/Razzokk/wireless-redstone/compare/v1.2.2+1.20.4...v1.3.0+1.20.4

## [1.3.0+1.20.4] - 2026-10-03 ### Added - **Attachment** block version of Redstone Transmitter/Receiver and P2P Redstone Transmitter/Receiver - Configurable Attachment Mode: Define if the attachment block shall receive/output redstone only from/to the attached block or also all adjacent ones (except the opposite of the attached side) - Target is shown underneath the crosshair when a P2P block is looked at with a **Linker** - Frequency items show a message after a frequency has been copied or set ### Changed - Receivers are now updated immediately after a transmitter is (un)powered (before: 1 redstone tick delay) - This also allows to send 1 game ticks to receivers (e.g. with an observer) - Use int array tag (NBT) for storing block positions (transmitters, p2p link, ...) - This change is *only* backwards compatible (i.e., you can upgrade to newer versions but going back to older one will break the redstone network) - Improved names and descriptions in config screen - Redstone transmitters and receivers now also update directly after block placement (also with `/setblock` and `/fill` command) - If you place a transmitter with a frequency (e.g., picked up in creative with CTRL, it also shows the frequency in the tooltip), it will now correctly register itself in the redstone ether network, before it did not do that - If you place a receiver with a frequency it will turn on if any transmitters on the frequency are on - Note: Frequency receivers (transmitters not) now also work when relocated with frames from project-red ### Fixed - Sniffer stack size is supposed to be 1 - Sniffer and target highlight render wobbling when far out in the world due to floating point number precision (the farther out, the bigger the wobble) - P2P transmitter and receiver block entities not updating data correctly - Fabric: - Wrong mixin configuration (was only registered on the client, oops) - Redstone wire not connecting to transmitters and receivers (if played on server) - Frequency activated with remote stayed on if: - Switching to another item in hotbar - Dropped by player (if played on server) - Normal usage (releasing right mouse button, if played on server) - Forge (**1.20.4**): - Minecraft startup crash with forge version of the mod (used invalid unobfuscated jar) - Affected versions (**1.2.0**, **1.2.1**, **1.2.2**) [1.3.0+1.20.4]: https://github.com/Razzokk/wireless-redstone/compare/v1.2.2+1.20.4...v1.3.0+1.20.4

## [1.3.0+1.20.4] - 2026-10-03 ### Added - **Attachment** block version of Redstone Transmitter/Receiver and P2P Redstone Transmitter/Receiver - Configurable Attachment Mode: Define if the attachment block shall receive/output redstone only from/to the attached block or also all adjacent ones (except the opposite of the attached side) - Target is shown underneath the crosshair when a P2P block is looked at with a **Linker** - Frequency items show a message after a frequency has been copied or set ### Changed - Receivers are now updated immediately after a transmitter is (un)powered (before: 1 redstone tick delay) - This also allows to send 1 game ticks to receivers (e.g. with an observer) - Use int array tag (NBT) for storing block positions (transmitters, p2p link, ...) - This change is *only* backwards compatible (i.e., you can upgrade to newer versions but going back to older one will break the redstone network) - Improved names and descriptions in config screen - Redstone transmitters and receivers now also update directly after block placement (also with `/setblock` and `/fill` command) - If you place a transmitter with a frequency (e.g., picked up in creative with CTRL, it also shows the frequency in the tooltip), it will now correctly register itself in the redstone ether network, before it did not do that - If you place a receiver with a frequency it will turn on if any transmitters on the frequency are on - Note: Frequency receivers (transmitters not) now also work when relocated with frames from project-red ### Fixed - Sniffer stack size is supposed to be 1 - Sniffer and target highlight render wobbling when far out in the world due to floating point number precision (the farther out, the bigger the wobble) - P2P transmitter and receiver block entities not updating data correctly - Fabric: - Wrong mixin configuration (was only registered on the client, oops) - Redstone wire not connecting to transmitters and receivers (if played on server) - Frequency activated with remote stayed on if: - Switching to another item in hotbar - Dropped by player (if played on server) - Normal usage (releasing right mouse button, if played on server) - Forge (**1.20.4**): - Minecraft startup crash with forge version of the mod (used invalid unobfuscated jar) - Affected versions (**1.2.0**, **1.2.1**, **1.2.2**) [1.3.0+1.20.4]: https://github.com/Razzokk/wireless-redstone/compare/v1.2.2+1.20.4...v1.3.0+1.20.4

## [1.3.0+1.19.2] - 2026-10-03 Backport from 1.3.0+1.20.1 [1.3.0+1.19.2]: https://github.com/Razzokk/wireless-redstone/compare/v1.19.2-1.1.2...v1.3.0+1.19.2

## [1.3.0+1.19.2] - 2026-10-03 Backport from 1.3.0+1.20.1 [1.3.0+1.19.2]: https://github.com/Razzokk/wireless-redstone/compare/v1.19.2-1.1.2...v1.3.0+1.19.2

## [1.2.2+1.20.4] - 2025-09-30 ### Changed - Shorten display name on [CurseForge](https://www.curseforge.com/minecraft/mc-mods/wirelessredstone) and [Modrinth](): - before: `[<loader> <mc-version>] wirelessredstone-<mod-version>` e.g. **[Forge 1.20.1] wirelessredstone-1.2.2** - now: `[<loader> <mc-version>] <mod-version> Wireless Redstone` e.g. **[Forge 1.20.1] 1.2.2 Wireless Redstone** ### Fixed - Linker highlight not showing when held in off-hand [1.2.2+1.20.4]: https://github.com/Razzokk/wireless-redstone/compare/v1.2.1+1.20.4...v1.2.2+1.20.4

## [1.2.2+1.20.4] - 2025-09-30 ### Changed - Shorten display name on [CurseForge](https://www.curseforge.com/minecraft/mc-mods/wirelessredstone) and [Modrinth](): - before: `[<loader> <mc-version>] wirelessredstone-<mod-version>` e.g. **[Forge 1.20.1] wirelessredstone-1.2.2** - now: `[<loader> <mc-version>] <mod-version> Wireless Redstone` e.g. **[Forge 1.20.1] 1.2.2 Wireless Redstone** ### Fixed - Linker highlight not showing when held in off-hand [1.2.2+1.20.4]: https://github.com/Razzokk/wireless-redstone/compare/v1.2.1+1.20.4...v1.2.2+1.20.4

## [1.2.2+1.20.4] - 2025-09-30 ### Changed - Shorten display name on [CurseForge](https://www.curseforge.com/minecraft/mc-mods/wirelessredstone) and [Modrinth](): - before: `[<loader> <mc-version>] wirelessredstone-<mod-version>` e.g. **[Forge 1.20.1] wirelessredstone-1.2.2** - now: `[<loader> <mc-version>] <mod-version> Wireless Redstone` e.g. **[Forge 1.20.1] 1.2.2 Wireless Redstone** ### Fixed - Linker highlight not showing when held in off-hand [1.2.2+1.20.4]: https://github.com/Razzokk/wireless-redstone/compare/v1.2.1+1.20.4...v1.2.2+1.20.4

## [1.2.2+1.20.1] - 2025-09-30 ### Changed - Shorten display name on [CurseForge](https://www.curseforge.com/minecraft/mc-mods/wirelessredstone) and [Modrinth](): - before: `[<loader> <mc-version>] wirelessredstone-<mod-version>` e.g. **[Forge 1.20.1] wirelessredstone-1.2.2** - now: `[<loader> <mc-version>] <mod-version> Wireless Redstone` e.g. **[Forge 1.20.1] 1.2.2 Wireless Redstone** ### Fixed - Linker highlight not showing when held in off-hand - NeoForge: startup crash due to locked registry exception [1.2.2+1.20.1]: https://github.com/Razzokk/wireless-redstone/compare/v1.2.1+1.20.1...v1.2.2+1.20.1

## [1.2.2+1.20.1] - 2025-09-30 ### Changed - Shorten display name on [CurseForge](https://www.curseforge.com/minecraft/mc-mods/wirelessredstone) and [Modrinth](): - before: `[<loader> <mc-version>] wirelessredstone-<mod-version>` e.g. **[Forge 1.20.1] wirelessredstone-1.2.2** - now: `[<loader> <mc-version>] <mod-version> Wireless Redstone` e.g. **[Forge 1.20.1] 1.2.2 Wireless Redstone** ### Fixed - Linker highlight not showing when held in off-hand - NeoForge: startup crash due to locked registry exception [1.2.2+1.20.1]: https://github.com/Razzokk/wireless-redstone/compare/v1.2.1+1.20.1...v1.2.2+1.20.1

## [1.2.1+1.20.1] - 2025-09-20 Back-port from **1.2.1+1.20.4** [1.2.1+1.20.1]: https://github.com/Razzokk/wireless-redstone/compare/v1.20.1-1.1.3...v1.2.1+1.20.1

## [1.2.1+1.20.1] - 2025-09-20 Back-port from **1.2.1+1.20.4** [1.2.1+1.20.1]: https://github.com/Razzokk/wireless-redstone/compare/v1.20.1-1.1.3...v1.2.1+1.20.1

## [1.2.1+1.20.4] - 2025-09-19 ### Changed - Remove exception stacktrace from config error log [1.2.1+1.20.4]: https://github.com/Razzokk/wireless-redstone/compare/v1.2.0+1.20.4...v1.2.1+1.20.4

## [1.2.1+1.20.4] - 2025-09-19 ### Changed - Remove exception stacktrace from config error log [1.2.1+1.20.4]: https://github.com/Razzokk/wireless-redstone/compare/v1.2.0+1.20.4...v1.2.1+1.20.4

## [1.2.1+1.20.4] - 2025-09-19 ### Changed - Remove exception stacktrace from config error log [1.2.1+1.20.4]: https://github.com/Razzokk/wireless-redstone/compare/v1.2.0+1.20.4...v1.2.1+1.20.4

## [1.2.0+1.20.4] - 2025-09-11 ### Changed - Versioning Scheme: - Before: `<mcversion>-<version>`, e.g. `1.20.4-1.2.0` - After: `<version>+<mcversion>`, e.g. `1.2.0+1.20.4` - Dev only - use [ParchmentMC](https://parchmentmc.org/) for mappings and adjust/re-write code accordingly - refactor code to be more in common module - improve project structure (multi-loader) with help of: - [MultiLoader-Template](https://github.com/jaredlll08/MultiLoader-Template) - [greenhouse-multiloader-template](https://github.com/GreenhouseModding/greenhouse-multiloader-template) [1.2.0+1.20.4]: https://github.com/Razzokk/wireless-redstone/compare/v1.20.4-1.2.0-beta...v1.2.0+1.20.4

## [1.2.0+1.20.4] - 2025-09-11 ### Changed - Versioning Scheme: - Before: `<mcversion>-<version>`, e.g. `1.20.4-1.2.0` - After: `<version>+<mcversion>`, e.g. `1.2.0+1.20.4` - Dev only - use [ParchmentMC](https://parchmentmc.org/) for mappings and adjust/re-write code accordingly - refactor code to be more in common module - improve project structure (multi-loader) with help of: - [MultiLoader-Template](https://github.com/jaredlll08/MultiLoader-Template) - [greenhouse-multiloader-template](https://github.com/GreenhouseModding/greenhouse-multiloader-template) [1.2.0+1.20.4]: https://github.com/Razzokk/wireless-redstone/compare/v1.20.4-1.2.0-beta...v1.2.0+1.20.4

## [1.2.0+1.20.4] - 2025-09-11 ### Changed - Versioning Scheme: - Before: `<mcversion>-<version>`, e.g. `1.20.4-1.2.0` - After: `<version>+<mcversion>`, e.g. `1.2.0+1.20.4` - Dev only - use [ParchmentMC](https://parchmentmc.org/) for mappings and adjust/re-write code accordingly - refactor code to be more in common module - improve project structure (multi-loader) with help of: - [MultiLoader-Template](https://github.com/jaredlll08/MultiLoader-Template) - [greenhouse-multiloader-template](https://github.com/GreenhouseModding/greenhouse-multiloader-template) [1.2.0+1.20.4]: https://github.com/Razzokk/wireless-redstone/compare/v1.20.4-1.2.0-beta...v1.2.0+1.20.4

## [1.20.4-1.2.0-beta] - 2025-03-13 ### Fixed - Forge & NeoForge: redstone wires connecting up or down to transmitters/receivers - Fabric: redstone wires connecting up or down to redstone utility blocks ### Added - **P2P redstone transmitter** and **receiver** for direct wireless linkage - **Linker** to link p2p transmitter and receiver - Similar to the sniffer, highlights the targeted block ### Changed - Redstone transmitters and receivers now use the `cube_column` block model instead of `cube_bottom_top` - Why? The bottom and top textures have been the same since the initial release, and the corresponding textures have also been removed. - If you have a custom resource pack for Wireless Redstone, you can still use the `cube_bottom_top` model, but you will need to provide your own model files, see [Model](https://minecraft.wiki/w/Model). - Highlight renderers now use the outline of the block instead of just a 1x1x1 block [1.20.4-1.2.0-beta]: https://github.com/Razzokk/wireless-redstone/compare/release/1.20.4-1.1.5...release/1.20.4-1.2.0-beta

## [1.20.4-1.2.0-beta] - 2025-03-13 ### Fixed - Forge & NeoForge: redstone wires connecting up or down to transmitters/receivers - Fabric: redstone wires connecting up or down to redstone utility blocks ### Added - **P2P redstone transmitter** and **receiver** for direct wireless linkage - **Linker** to link p2p transmitter and receiver - Similar to the sniffer, highlights the targeted block ### Changed - Redstone transmitters and receivers now use the `cube_column` block model instead of `cube_bottom_top` - Why? The bottom and top textures have been the same since the initial release, and the corresponding textures have also been removed. - If you have a custom resource pack for Wireless Redstone, you can still use the `cube_bottom_top` model, but you will need to provide your own model files, see [Model](https://minecraft.wiki/w/Model). - Highlight renderers now use the outline of the block instead of just a 1x1x1 block [1.20.4-1.2.0-beta]: https://github.com/Razzokk/wireless-redstone/compare/release/1.20.4-1.1.5...release/1.20.4-1.2.0-beta

## [1.20.4-1.2.0-beta] - 2025-03-13 ### Fixed - Forge & NeoForge: redstone wires connecting up or down to transmitters/receivers - Fabric: redstone wires connecting up or down to redstone utility blocks ### Added - **P2P redstone transmitter** and **receiver** for direct wireless linkage - **Linker** to link p2p transmitter and receiver - Similar to the sniffer, highlights the targeted block ### Changed - Redstone transmitters and receivers now use the `cube_column` block model instead of `cube_bottom_top` - Why? The bottom and top textures have been the same since the initial release, and the corresponding textures have also been removed. - If you have a custom resource pack for Wireless Redstone, you can still use the `cube_bottom_top` model, but you will need to provide your own model files, see [Model](https://minecraft.wiki/w/Model). - Highlight renderers now use the outline of the block instead of just a 1x1x1 block [1.20.4-1.2.0-beta]: https://github.com/Razzokk/wireless-redstone/compare/release/1.20.4-1.1.5...release/1.20.4-1.2.0-beta

## [1.20.4-1.1.5] - 2024-07-09 ### Fixed - Forge & NeoForge: race condition on client setup -> item property registration - Dev only: - Forge: not starting in dev environment (module conflicts) [1.20.4-1.1.5]: https://github.com/Razzokk/wireless-redstone/compare/release/1.20.4-1.1.4...release/1.20.4-1.1.5

## [1.20.4-1.1.5] - 2024-07-09 ### Fixed - Forge & NeoForge: race condition on client setup -> item property registration - Dev only: - Forge: not starting in dev environment (module conflicts) [1.20.4-1.1.5]: https://github.com/Razzokk/wireless-redstone/compare/release/1.20.4-1.1.4...release/1.20.4-1.1.5

## [1.20.1-1.1.3] - 2024-07-09 Skip for Fabric ### Fixed - Forge: race condition on client setup -> item property registration [1.20.1-1.1.3]: https://github.com/Razzokk/wireless-redstone/compare/release/1.20.1-1.1.2...release/1.20.1-1.1.3

## [1.19.4-1.1.1] - 2024-07-09 Skip for Fabric ### Fixed - Forge: race condition on client setup -> item property registration [1.19.4-1.1.1]: https://github.com/Razzokk/WirelessRedstone/compare/release/1.19.4-1.1.0...release/1.19.4-1.1.1

## [1.19.2-1.1.2] - 2024-07-09 Skip for Fabric ### Fixed - Forge: race condition on client setup -> item property registration [1.19.2-1.1.2]: https://github.com/Razzokk/WirelessRedstone/compare/release/1.19.2-1.1.1...release/1.19.2-1.1.2

## [1.18.2-1.1.2] - 2024-07-09 Skip for Fabric ### Fixed - Forge: race condition on client setup -> item property registration [1.18.2-1.1.2]: https://github.com/Razzokk/WirelessRedstone/compare/release/1.18.2-1.1.1...release/1.18.2-1.1.2

## [1.20.4-1.1.4] - 2024-04-30 ### Fixed - Sniffer not outputting message on newly created world (no redstone ether present) ### Added - Show frequency of transmitters and receivers when picked up with nbt data ### Changed - Updated german translation - Moved block textures to their respective directories - If you have a custom resource pack for Wireless Redstone, you have to move and rename them too - Sniffer chat messages: - Changed style of how block positions are shown in chat (can now also be adjusted in lang file) - From: `There are no active transmitters on this frequency (<frequency>)`, to: `No active transmitters on frequency <frequency>` - From: `Active transmitters on this frequency (<frequency>): <transmitters>`, to: `Active transmitters on frequency <frequency>: <transmitters>` - Dev only: - Separate datagen sub-project - Update architectury loom to 1.6 - Update changelog plugin to 2.2.0 - Update fabric loader and api to 0.15.10 and 0.97.0+1.20.4 respectively - Update forge to 49.0.49 - Update neoforged to 20.4.233 [1.20.4-1.1.4]: https://github.com/Razzokk/wireless-redstone/compare/release/1.20.4-1.1.3...release/1.20.4-1.1.4

## [1.20.4-1.1.4] - 2024-04-30 ### Fixed - Sniffer not outputting message on newly created world (no redstone ether present) ### Added - Show frequency of transmitters and receivers when picked up with nbt data ### Changed - Updated german translation - Moved block textures to their respective directories - If you have a custom resource pack for Wireless Redstone, you have to move and rename them too - Sniffer chat messages: - Changed style of how block positions are shown in chat (can now also be adjusted in lang file) - From: `There are no active transmitters on this frequency (<frequency>)`, to: `No active transmitters on frequency <frequency>` - From: `Active transmitters on this frequency (<frequency>): <transmitters>`, to: `Active transmitters on frequency <frequency>: <transmitters>` - Dev only: - Separate datagen sub-project - Update architectury loom to 1.6 - Update changelog plugin to 2.2.0 - Update fabric loader and api to 0.15.10 and 0.97.0+1.20.4 respectively - Update forge to 49.0.49 - Update neoforged to 20.4.233 [1.20.4-1.1.4]: https://github.com/Razzokk/wireless-redstone/compare/release/1.20.4-1.1.3...release/1.20.4-1.1.4

## [1.20.4-1.1.4] - 2024-04-30 ### Fixed - Sniffer not outputting message on newly created world (no redstone ether present) ### Added - Show frequency of transmitters and receivers when picked up with nbt data ### Changed - Updated german translation - Moved block textures to their respective directories - If you have a custom resource pack for Wireless Redstone, you have to move and rename them too - Sniffer chat messages: - Changed style of how block positions are shown in chat (can now also be adjusted in lang file) - From: `There are no active transmitters on this frequency (<frequency>)`, to: `No active transmitters on frequency <frequency>` - From: `Active transmitters on this frequency (<frequency>): <transmitters>`, to: `Active transmitters on frequency <frequency>: <transmitters>` - Dev only: - Separate datagen sub-project - Update architectury loom to 1.6 - Update changelog plugin to 2.2.0 - Update fabric loader and api to 0.15.10 and 0.97.0+1.20.4 respectively - Update forge to 49.0.49 - Update neoforged to 20.4.233 [1.20.4-1.1.4]: https://github.com/Razzokk/wireless-redstone/compare/release/1.20.4-1.1.3...release/1.20.4-1.1.4

## [1.20.4-1.1.3] - 2024-03-19 ### Added - [NeoForged](https://neoforged.net/) support ### Changed - Refactored/cleaned up networking classes [1.20.4-1.1.3]: https://github.com/Razzokk/wireless-redstone/compare/release/1.20.4-1.1.2...release/1.20.4-1.1.3

## [1.20.4-1.1.2] - 2024-03-12 Port to MC 1.20.4 [1.20.4-1.1.2]: https://github.com/Razzokk/wireless-redstone/compare/release/1.20.1-1.1.2...release/1.20.4-1.1.2

## [1.20.1-1.1.2] - 2024-03-12 ### Changed - `No frequency set` message now shows over the action bar - GitHub repository url is now: https://github.com/Razzokk/wireless-redstone - Moved icon from `resources/` to `resources/assets/wirelessredstone/` - Dev only: - Yarn mappings for fabric **and** forge (using [Architectury Loom](https://docs.architectury.dev/loom/introduction)) - Extracted most of the code into the common project -> less fabric and forge specific code - Update forge to 47.2.20 - Update fabric loader and api to 0.15.7 and 0.92.0+1.20.1 respectively - Use gradle v8.6 ### Added - Dev only: [Architectury Loom](https://docs.architectury.dev/loom/introduction) for easier multi-loader setup [1.20.1-1.1.2]: https://github.com/Razzokk/wireless-redstone/compare/release/1.20.1-1.1.1...release/1.20.1-1.1.2

## [1.20.4-1.1.2] - 2024-03-12 Port to MC 1.20.4 [1.20.4-1.1.2]: https://github.com/Razzokk/wireless-redstone/compare/release/1.20.1-1.1.2...release/1.20.4-1.1.2

## [1.20.1-1.1.2] - 2024-03-12 ### Changed - `No frequency set` message now shows over the action bar - GitHub repository url is now: https://github.com/Razzokk/wireless-redstone - Moved icon from `resources/` to `resources/assets/wirelessredstone/` - Dev only: - Yarn mappings for fabric **and** forge (using [Architectury Loom](https://docs.architectury.dev/loom/introduction)) - Extracted most of the code into the common project -> less fabric and forge specific code - Update forge to 47.2.20 - Update fabric loader and api to 0.15.7 and 0.92.0+1.20.1 respectively - Use gradle v8.6 ### Added - Dev only: [Architectury Loom](https://docs.architectury.dev/loom/introduction) for easier multi-loader setup [1.20.1-1.1.2]: https://github.com/Razzokk/wireless-redstone/compare/release/1.20.1-1.1.1...release/1.20.1-1.1.2

## [1.18.2-1.1.1] - 2023-08-28 Backport from [1.19.2](https://github.com/Razzokk/WirelessRedstone/commit/7fe7a7f3e3528b14c314489ff0b082346473e753) [1.18.2-1.1.1]: https://github.com/Razzokk/WirelessRedstone/compare/release/1.18.2-0.1.0b...release/1.18.2-1.1.1

## [1.18.2-1.1.1] - 2023-08-28 Backport from [1.19.2](https://github.com/Razzokk/WirelessRedstone/commit/7fe7a7f3e3528b14c314489ff0b082346473e753) [1.18.2-1.1.1]: https://github.com/Razzokk/WirelessRedstone/compare/release/1.18.2-0.1.0b...release/1.18.2-1.1.1

## [1.19.2-1.1.1] - 2023-08-28 ### Fixed - Crash when opening wireless redstone in mods list screen [1.19.2-1.1.1]: https://github.com/Razzokk/WirelessRedstone/compare/release/1.19.2-1.1.0...release/1.19.2-1.1.1

## [1.19.2-1.1.1] - 2023-08-28 ### Fixed - Crash when opening wireless redstone in mods list screen [1.19.2-1.1.1]: https://github.com/Razzokk/WirelessRedstone/compare/release/1.19.2-1.1.0...release/1.19.2-1.1.1

## [1.19.2-1.1.0] - 2023-08-28 Backport from [1.19.4](https://github.com/Razzokk/WirelessRedstone/commit/244532eb585a92da513cbee90e0c0a0149a08721) [1.19.2-1.1.0]: https://github.com/Razzokk/WirelessRedstone/compare/release/1.19.2-0.1.0b...release/1.19.2-1.1.0

## [1.19.2-1.1.0] - 2023-08-28 Backport from [1.19.4](https://github.com/Razzokk/WirelessRedstone/commit/244532eb585a92da513cbee90e0c0a0149a08721) [1.19.2-1.1.0]: https://github.com/Razzokk/WirelessRedstone/compare/release/1.19.2-0.1.0b...release/1.19.2-1.1.0

## [1.19.4-1.1.0] - 2023-08-17 Backport from [1.20.1](https://github.com/Razzokk/WirelessRedstone/commit/7879b0cf44b6b8a8eb6178f13e56b68cb102b78c) ### Changed - Merged fabric and forge branches together [1.19.4-1.1.0]: https://github.com/Razzokk/WirelessRedstone/compare/release/1.19.3-1.0.0-fabric...release/1.19.4-1.1.0

## [1.19.4-1.1.0] - 2023-08-17 Backport from [1.20.1](https://github.com/Razzokk/WirelessRedstone/commit/7879b0cf44b6b8a8eb6178f13e56b68cb102b78c) ### Changed - Merged fabric and forge branches together [1.19.4-1.1.0]: https://github.com/Razzokk/WirelessRedstone/compare/release/1.19.3-1.0.0-fabric...release/1.19.4-1.1.0

## [1.20.1-1.1.1] - 2023-07-17 Port 1.20 fabric version to 1.20 forge. ### Changed - Setup multi-loader repository structure [1.20.1-1.1.1]: https://github.com/Razzokk/WirelessRedstone/compare/release/1.20.1-1.1.0...release/1.20.1-1.1.1

## [1.20.1-1.1.0] - 2023-07-06 ### Added - Remote item - to power things from inside your inventory! - Keybinding in frequency GUI -> when editing the frequency, pressing `Enter` closes the GUI and saves the frequency [1.20.1-1.1.0]: https://github.com/Razzokk/WirelessRedstone/compare/release/fabric/1.20.1-1.0.2...release/fabric/1.20.1-1.1.0

## [1.20.1-1.0.2] - 2023-06-29 ### Added - Data generation ### Fixed - Updating strong powered indirectly neighbored redstone components after removal of receiver [1.20.1-1.0.2]: https://github.com/Razzokk/WirelessRedstone/compare/release/fabric/1.20.1-1.0.1...release/fabric/1.20.1-1.0.2

## [1.20.1-1.0.1] - 2023-06-27 ### Added - Proper `README.md` - Automated Modrinth and CurseForge publishing with the [Minotaur](https://github.com/modrinth/minotaur) and [CurseForgeGradle](https://github.com/Darkhax/CurseForgeGradle) gradle tasks/plugins - Changelog semi-automation with the [Gradle Changelog Plugin](https://github.com/JetBrains/gradle-changelog-plugin) - Fancy [shields.io](https://shields.io/) badges to `README.md` - Uploading of build artifacts via GitHub actions ### Changed - Update gradle and fabric-loom - Separate client more strictly - Updated link of the homepage, source and issues websites ### Fixed - Stack size of frequency items limited to 1 [1.20.1-1.0.1]: https://github.com/Razzokk/WirelessRedstone/compare/release/fabric/1.20.1-1.0.0...release/fabric/1.20.1-1.0.1

## 1.20.1-1.0.0 - 2023-06-16 Port to MC 1.20.1 ### Changed - Increased contrast of T and R letters on transmitter and receiver texture

### Version 1.12.2-1.1.6: - FIX: data-fixer crash when loading more than one world

### Version 1.12.2-1.1.5: - FIX: server startup crash due to access to client only files

### Version fabric-1.19.3-1.0.0: - Fabric port MC 1.19.3

### Version 1.12.2-1.1.5: -FIX: server startup crash due to access to client only files

### Version 1.19.2-0.1.0b: - Initial 1.19.2 version

### Version 1.18.2-0.1.0b: - Initial 1.18.2 version (1.19.2 backport)

### Version 1.16.5-1.1.4: - FIX: Frequencies getting corrupted and receivers/transmitters not updating anymore ### Version 1.16.5-1.1.3: skip ### Version 1.16.5-1.1.2: - FIXED: Gui closable with inventory key ### Version 1.16.5-1.1.1: - FIXED: Post-placement state changes ### Version 1.16.5-1.1.0: - UPDATED: to MC 1.16.5 - NOTE: Due to huge internal changes I suggest making a world backup! - ADDED: Frequency Sniffer - ADDED: Config option to color the frequency that is displayed on transmitters/receivers - ADDED: Command to clear a frequency from active transmitters (Only use this if the frequency is "stuck") - ADDED: Wireless Redstone blocks can now be mined faster with a pickaxe - ADDED: Cooldown for the remote item (0.5s) - CHANGED: Circuit recipe output from 4 to 2 - FIXED: Potential crashes caused by Remote::onUpdate and BlockFrequency::setPoweredState - FIXED: Actual values for the frequency between 0 and 65536 - RENAMED: Wireless Transmitter -> Redstone Transmitter - RENAMED: Wireless Receiver -> Redstone Receiver - RENAMED: Wireless Remote -> Remote - RENAMED: Wireless Circuit -> Circuit - RENAMED: Frequency Copier -> Frequency Tool ### Version 1.16.3-1.0.1: - FIXED: Crash on tile entity write ### Version 1.16.3-1.0.0: - FIXED: Blocks not dropping when destroyed - Internal code refactoring ### Version 1.16.3-0.0.2b: - FIXED: bug where the frequency was not set when using the frequency gui ### Version 1.16.3-0.0.1b: - Initial 1.16.3 version, ported from 1.15.2

### Version 1.12.2-1.1.4: - FIX: receivers/transmitters before mod version 1.12.2-1.1.3 breaking when using mod version >= 1.12.2-1.1.3 ### Version 1.12.2-1.1.3: WARNING: This version will break working transmitters/receivers from earlier versions of this mod - FIX: Frequencies getting corrupted and receivers/transmitters not updating anymore ### Version 1.12.2-1.1.2: - FIXED: Gui closable with inventory key ### Version 1.12.2-1.1.1: - FIXED: NBT data used correctly when placing nbt stored receiver/transmitter in world - FIXED: (Project Red interaction) Red alloy wire can now be placed on the side of receiver/transmitter ### Version 1.12.2-1.1.0: - ADDED: Frequency Sniffer - ADDED: Config option to color the frequency that is displayed on transmitters/receivers - ADDED: Command to clear a frequency from active transmitters (Only use this if the frequency is "stuck") - ADDED: Wireless Redstone blocks can now be mined faster with a pickaxe - ADDED: Cooldown for the remote item (0.5s) - CHANGED: Circuit recipe output from 4 to 2 - FIXED: Potential crashes caused by Remote::onUpdate and BlockFrequency::setPoweredState - FIXED: Actual values for the frequency between 0 and 65536 ### Version 1.12.2-1.0.0: - FIXED: Active frequency stays active after transmitter exploded ### Version 1.12.2-0.0.1b: - Initial 1.12.2 version - RENAMED: Wireless Transmitter -> Redstone Transmitter - RENAMED: Wireless Receiver -> Redstone Receiver - RENAMED: Wireless Remote -> Remote - RENAMED: Wireless Circuit -> Circuit - RENAMED: Frequency Copier -> Frequency Tool

### Version 1.15.2-1.0.1: - FIXED: Crash on tile entity write ### Version 1.15.2-1.0.0: - FIXED: Blocks not dropping when destroyed - Internal code refactoring ### Version 1.15.2-0.0.2b: - FIXED: bug where the frequency was not set when using the frequency gui ### Version 1.15.2-0.0.1b: - Initial 1.15.2 version - Added Wireless Redstone Mod

## Version 1.17.1-1.0.0-beta-3: - FIXED: bug where receivers/transmitters were removed from the internal network although the shouldn't - FIXED: receivers not updating on loading them - REFACTOR: improved frequency block entity update ## Version 1.17.1-1.0.0-beta-2: - FIXED: crash on forge 37.0.31 or higher ## Version 1.17.1-1.0.0-beta: - Initial 1.17.1 beta release