ВЕРСИИ (241)

# 1.17.1 ## Fixes - Fixed mod becoming unusable after leaving a multiplayer game.

# 1.17.1 ## Fixes - Fixed mod becoming unusable after leaving a multiplayer game.

# 1.17.2 ## Fixes - Fixed mod becoming unusable after leaving a multiplayer game.

Updated to Minecraft 26.3

Updated to Minecraft 26.2

Updated to Minecraft 26.1

fixes NPE's related to the `/metergroup` command

Updated to Minecraft 1.21.11

# 1.17 ## Features - There are now tooltips for cycled options to explain each value. - Localization is now complete (in 1.16 several places were overlooked). - Long button messages now scroll back and forth instead of extending past the button. ### Meter Highlights Option A new option that controls when meter highlights are rendered. The possible values are: - Never: never render meter highlights. - Always: always render meter highlights. - In Focus Mode: render meter highlights when in Focus Mode. The highlight for the meter in focus will render normally while the highlights for the other meters will be slightly dimmed. - In Focus: render meter highlights when in Focus Mode, and only the highlight for the meter in focus. ### Meter Highlights Range Option A new option that controls the range around the player within which meter highlights are rendered. Entering a negative value will disable the range check entirely. Any positive value acts as the maximum distance a meter can be from the player before its highlight will no longer render. ### Meter Name Tags Option This option has been updated with new functionality. - In Focus Mode: the name tags for meters not in focus are now slightly dimmed, so that the meter in focus stands out. - In Focus: name tags only render when in Focus Mode, and only the name tag for the meter in focus. ### Block Event Results Logging The "Block Event" event type now also logs the result of block events. Possible values are "success" for block events that ran successfully, and "failure" for block events that did not run. ### Expanded Tutorial The tutorial has been expanded to include pointers for Focus Mode and saving/loading meter groups. ## Changes - Tooltips will no longer go off screen. - The order of the RGB sliders in the meter controls is now Red, Green, Blue (it was Red, Blue, Green). - The HUD Opacity option has been disabled for Minecraft versions 1.21.9 and above. In these version,s the HUD will now always render at 100% opacity. The option may be enabled again in a later update. ## Fixes - Re-ordering the meter list behaved unexpectedly when the cursor was way outside the meter list. This has been fixed.

# 1.16.1 ## Fixes ### Lithium Compatibility The scheduling of block and fluid ticks was not captured when Lithium was installed. This is now fixed.

# 1.16.1 ## Fixes ### Lithium Compatibility The scheduling of block and fluid ticks was not captured when Lithium was installed. This is now fixed.

# 1.16.1 ## Fixes ### Lithium Compatibility The scheduling of block and fluid ticks was not captured when Lithium was installed. This is now fixed.

# 1.16.1 ## Fixes ### Lithium Compatibility The scheduling of block and fluid ticks was not captured when Lithium was installed. This is now fixed.

Updated to Minecraft 1.21.7 - fixes text highlight rendering

Updated to Minecraft 1.21.6

# 1.16 ## Features ### Saved Meter Group Indicator When you load a saved meter group, an indicator will appear next to the meter group name, indicating which slot the meter group was loaded from, and whether the meter group has been modified since it was loaded. ### Auto-complete in text fields Some text fields in RSMM GUIs now have auto-complete. Auto-complete suggestions typically appear in a menu below the text fields, which can be navigated with the arrow keys. Pressing tab or return will insert the selected suggestion into the text field. ### Default Meter Properties screen This GUI has been tweaked to make it less confusing to use. ### Timeline sizing and scaling Behavior of the "Column Width" and "Row Height" options has been overhauled, and a "Cell Scale" option was added. The sizing and scaling of the timeline is now better behaved, and less prone to graphical errors. ### Localization All text displayed in RSMM GUIs, as well as command feedback and RSMM-related system messages and action bar messages, is now localized. As of this update the only translations are for English (US), but translations for other languages are welcome. ### Legacy Observers Compatibility RSMM for Minecraft 1.10 and older is now compatible with the Legacy Observers mod. ## Fixes The following bugs were fixed: - Using the scroll wheel to scroll through the timeline is possible even if the timeline is not paused. - Repeat clicks in RSMM GUIs are ignored if the cursor stays still. - Meter groups desync when multiple meter updates are received in one tick. - Clipping issues in the Options and Default Meter Properties screens. - Sliders are unresponsive and laggy (in Minecraft 1.12 and older). - Meter groups desync when the timeline is paused or in focus mode. - Meter name tags render behind blocks in some versions. - Meter highlights do not render at all with *Fabulous!* graphics.

# 1.16 ## Features ### Saved Meter Group Indicator When you load a saved meter group, an indicator will appear next to the meter group name, indicating which slot the meter group was loaded from, and whether the meter group has been modified since it was loaded. ### Auto-complete in text fields Some text fields in RSMM GUIs now have auto-complete. Auto-complete suggestions typically appear in a menu below the text fields, which can be navigated with the arrow keys. Pressing tab or return will insert the selected suggestion into the text field. ### Default Meter Properties screen This GUI has been tweaked to make it less confusing to use. ### Timeline sizing and scaling Behavior of the "Column Width" and "Row Height" options has been overhauled, and a "Cell Scale" option was added. The sizing and scaling of the timeline is now better behaved, and less prone to graphical errors. ### Localization All text displayed in RSMM GUIs, as well as command feedback and RSMM-related system messages and action bar messages, is now localized. As of this update the only translations are for English (US), but translations for other languages are welcome. ### Legacy Observers Compatibility RSMM for Minecraft 1.10 and older is now compatible with the Legacy Observers mod. ## Fixes The following bugs were fixed: - Using the scroll wheel to scroll through the timeline is possible even if the timeline is not paused. - Repeat clicks in RSMM GUIs are ignored if the cursor stays still. - Meter groups desync when multiple meter updates are received in one tick. - Clipping issues in the Options and Default Meter Properties screens. - Sliders are unresponsive and laggy (in Minecraft 1.12 and older). - Meter groups desync when the timeline is paused or in focus mode. - Meter name tags render behind blocks in some versions. - Meter highlights do not render at all with *Fabulous!* graphics.

# 1.16 ## Features ### Saved Meter Group Indicator When you load a saved meter group, an indicator will appear next to the meter group name, indicating which slot the meter group was loaded from, and whether the meter group has been modified since it was loaded. ### Auto-complete in text fields Some text fields in RSMM GUIs now have auto-complete. Auto-complete suggestions typically appear in a menu below the text fields, which can be navigated with the arrow keys. Pressing tab or return will insert the selected suggestion into the text field. ### Default Meter Properties screen This GUI has been tweaked to make it less confusing to use. ### Timeline sizing and scaling Behavior of the "Column Width" and "Row Height" options has been overhauled, and a "Cell Scale" option was added. The sizing and scaling of the timeline is now better behaved, and less prone to graphical errors. ### Localization All text displayed in RSMM GUIs, as well as command feedback and RSMM-related system messages and action bar messages, is now localized. As of this update the only translations are for English (US), but translations for other languages are welcome. ### Legacy Observers Compatibility RSMM for Minecraft 1.10 and older is now compatible with the Legacy Observers mod. ## Fixes The following bugs were fixed: - Using the scroll wheel to scroll through the timeline is possible even if the timeline is not paused. - Repeat clicks in RSMM GUIs are ignored if the cursor stays still. - Meter groups desync when multiple meter updates are received in one tick. - Clipping issues in the Options and Default Meter Properties screens. - Sliders are unresponsive and laggy (in Minecraft 1.12 and older). - Meter groups desync when the timeline is paused or in focus mode. - Meter name tags render behind blocks in some versions. - Meter highlights do not render at all with *Fabulous!* graphics.

# 1.16 ## Features ### Saved Meter Group Indicator When you load a saved meter group, an indicator will appear next to the meter group name, indicating which slot the meter group was loaded from, and whether the meter group has been modified since it was loaded. ### Auto-complete in text fields Some text fields in RSMM GUIs now have auto-complete. Auto-complete suggestions typically appear in a menu below the text fields, which can be navigated with the arrow keys. Pressing tab or return will insert the selected suggestion into the text field. ### Default Meter Properties screen This GUI has been tweaked to make it less confusing to use. ### Timeline sizing and scaling Behavior of the "Column Width" and "Row Height" options has been overhauled, and a "Cell Scale" option was added. The sizing and scaling of the timeline is now better behaved, and less prone to graphical errors. ### Localization All text displayed in RSMM GUIs, as well as command feedback and RSMM-related system messages and action bar messages, is now localized. As of this update the only translations are for English (US), but translations for other languages are welcome. ### Legacy Observers Compatibility RSMM for Minecraft 1.10 and older is now compatible with the Legacy Observers mod. ## Fixes The following bugs were fixed: - Using the scroll wheel to scroll through the timeline is possible even if the timeline is not paused. - Repeat clicks in RSMM GUIs are ignored if the cursor stays still. - Meter groups desync when multiple meter updates are received in one tick. - Clipping issues in the Options and Default Meter Properties screens. - Sliders are unresponsive and laggy (in Minecraft 1.12 and older). - Meter groups desync when the timeline is paused or in focus mode. - Meter name tags render behind blocks in some versions. - Meter highlights do not render at all with *Fabulous!* graphics.

# 1.16 ## Features ### Saved Meter Group Indicator When you load a saved meter group, an indicator will appear next to the meter group name, indicating which slot the meter group was loaded from, and whether the meter group has been modified since it was loaded. ### Auto-complete in text fields Some text fields in RSMM GUIs now have auto-complete. Auto-complete suggestions typically appear in a menu below the text fields, which can be navigated with the arrow keys. Pressing tab or return will insert the selected suggestion into the text field. ### Default Meter Properties screen This GUI has been tweaked to make it less confusing to use. ### Timeline sizing and scaling Behavior of the "Column Width" and "Row Height" options has been overhauled, and a "Cell Scale" option was added. The sizing and scaling of the timeline is now better behaved, and less prone to graphical errors. ### Localization All text displayed in RSMM GUIs, as well as command feedback and RSMM-related system messages and action bar messages, is now localized. As of this update the only translations are for English (US), but translations for other languages are welcome. ### Legacy Observers Compatibility RSMM for Minecraft 1.10 and older is now compatible with the Legacy Observers mod. ## Fixes The following bugs were fixed: - Using the scroll wheel to scroll through the timeline is possible even if the timeline is not paused. - Repeat clicks in RSMM GUIs are ignored if the cursor stays still. - Meter groups desync when multiple meter updates are received in one tick. - Clipping issues in the Options and Default Meter Properties screens. - Sliders are unresponsive and laggy (in Minecraft 1.12 and older). - Meter groups desync when the timeline is paused or in focus mode. - Meter name tags render behind blocks in some versions. - Meter highlights do not render at all with *Fabulous!* graphics.

# 1.16 ## Features ### Saved Meter Group Indicator When you load a saved meter group, an indicator will appear next to the meter group name, indicating which slot the meter group was loaded from, and whether the meter group has been modified since it was loaded. ### Auto-complete in text fields Some text fields in RSMM GUIs now have auto-complete. Auto-complete suggestions typically appear in a menu below the text fields, which can be navigated with the arrow keys. Pressing tab or return will insert the selected suggestion into the text field. ### Default Meter Properties screen This GUI has been tweaked to make it less confusing to use. ### Timeline sizing and scaling Behavior of the "Column Width" and "Row Height" options has been overhauled, and a "Cell Scale" option was added. The sizing and scaling of the timeline is now better behaved, and less prone to graphical errors. ### Localization All text displayed in RSMM GUIs, as well as command feedback and RSMM-related system messages and action bar messages, is now localized. As of this update the only translations are for English (US), but translations for other languages are welcome. ### Legacy Observers Compatibility RSMM for Minecraft 1.10 and older is now compatible with the Legacy Observers mod. ## Fixes The following bugs were fixed: - Using the scroll wheel to scroll through the timeline is possible even if the timeline is not paused. - Repeat clicks in RSMM GUIs are ignored if the cursor stays still. - Meter groups desync when multiple meter updates are received in one tick. - Clipping issues in the Options and Default Meter Properties screens. - Sliders are unresponsive and laggy (in Minecraft 1.12 and older). - Meter groups desync when the timeline is paused or in focus mode. - Meter name tags render behind blocks in some versions. - Meter highlights do not render at all with *Fabulous!* graphics.

# 1.16 ## Features ### Saved Meter Group Indicator When you load a saved meter group, an indicator will appear next to the meter group name, indicating which slot the meter group was loaded from, and whether the meter group has been modified since it was loaded. ### Auto-complete in text fields Some text fields in RSMM GUIs now have auto-complete. Auto-complete suggestions typically appear in a menu below the text fields, which can be navigated with the arrow keys. Pressing tab or return will insert the selected suggestion into the text field. ### Default Meter Properties screen This GUI has been tweaked to make it less confusing to use. ### Timeline sizing and scaling Behavior of the "Column Width" and "Row Height" options has been overhauled, and a "Cell Scale" option was added. The sizing and scaling of the timeline is now better behaved, and less prone to graphical errors. ### Localization All text displayed in RSMM GUIs, as well as command feedback and RSMM-related system messages and action bar messages, is now localized. As of this update the only translations are for English (US), but translations for other languages are welcome. ### Legacy Observers Compatibility RSMM for Minecraft 1.10 and older is now compatible with the Legacy Observers mod. ## Fixes The following bugs were fixed: - Using the scroll wheel to scroll through the timeline is possible even if the timeline is not paused. - Repeat clicks in RSMM GUIs are ignored if the cursor stays still. - Meter groups desync when multiple meter updates are received in one tick. - Clipping issues in the Options and Default Meter Properties screens. - Sliders are unresponsive and laggy (in Minecraft 1.12 and older). - Meter groups desync when the timeline is paused or in focus mode. - Meter name tags render behind blocks in some versions. - Meter highlights do not render at all with *Fabulous!* graphics.

# 1.16 ## Features ### Saved Meter Group Indicator When you load a saved meter group, an indicator will appear next to the meter group name, indicating which slot the meter group was loaded from, and whether the meter group has been modified since it was loaded. ### Auto-complete in text fields Some text fields in RSMM GUIs now have auto-complete. Auto-complete suggestions typically appear in a menu below the text fields, which can be navigated with the arrow keys. Pressing tab or return will insert the selected suggestion into the text field. ### Default Meter Properties screen This GUI has been tweaked to make it less confusing to use. ### Timeline sizing and scaling Behavior of the "Column Width" and "Row Height" options has been overhauled, and a "Cell Scale" option was added. The sizing and scaling of the timeline is now better behaved, and less prone to graphical errors. ### Localization All text displayed in RSMM GUIs, as well as command feedback and RSMM-related system messages and action bar messages, is now localized. As of this update the only translations are for English (US), but translations for other languages are welcome. ### Legacy Observers Compatibility RSMM for Minecraft 1.10 and older is now compatible with the Legacy Observers mod. ## Fixes The following bugs were fixed: - Using the scroll wheel to scroll through the timeline is possible even if the timeline is not paused. - Repeat clicks in RSMM GUIs are ignored if the cursor stays still. - Meter groups desync when multiple meter updates are received in one tick. - Clipping issues in the Options and Default Meter Properties screens. - Sliders are unresponsive and laggy (in Minecraft 1.12 and older). - Meter groups desync when the timeline is paused or in focus mode. - Meter name tags render behind blocks in some versions. - Meter highlights do not render at all with *Fabulous!* graphics.

# 1.16 ## Features ### Saved Meter Group Indicator When you load a saved meter group, an indicator will appear next to the meter group name, indicating which slot the meter group was loaded from, and whether the meter group has been modified since it was loaded. ### Auto-complete in text fields Some text fields in RSMM GUIs now have auto-complete. Auto-complete suggestions typically appear in a menu below the text fields, which can be navigated with the arrow keys. Pressing tab or return will insert the selected suggestion into the text field. ### Default Meter Properties screen This GUI has been tweaked to make it less confusing to use. ### Timeline sizing and scaling Behavior of the "Column Width" and "Row Height" options has been overhauled, and a "Cell Scale" option was added. The sizing and scaling of the timeline is now better behaved, and less prone to graphical errors. ### Localization All text displayed in RSMM GUIs, as well as command feedback and RSMM-related system messages and action bar messages, is now localized. As of this update the only translations are for English (US), but translations for other languages are welcome. ### Legacy Observers Compatibility RSMM for Minecraft 1.10 and older is now compatible with the Legacy Observers mod. ## Fixes The following bugs were fixed: - Using the scroll wheel to scroll through the timeline is possible even if the timeline is not paused. - Repeat clicks in RSMM GUIs are ignored if the cursor stays still. - Meter groups desync when multiple meter updates are received in one tick. - Clipping issues in the Options and Default Meter Properties screens. - Sliders are unresponsive and laggy (in Minecraft 1.12 and older). - Meter groups desync when the timeline is paused or in focus mode. - Meter name tags render behind blocks in some versions. - Meter highlights do not render at all with *Fabulous!* graphics.

# 1.16 ## Features ### Saved Meter Group Indicator When you load a saved meter group, an indicator will appear next to the meter group name, indicating which slot the meter group was loaded from, and whether the meter group has been modified since it was loaded. ### Auto-complete in text fields Some text fields in RSMM GUIs now have auto-complete. Auto-complete suggestions typically appear in a menu below the text fields, which can be navigated with the arrow keys. Pressing tab or return will insert the selected suggestion into the text field. ### Default Meter Properties screen This GUI has been tweaked to make it less confusing to use. ### Timeline sizing and scaling Behavior of the "Column Width" and "Row Height" options has been overhauled, and a "Cell Scale" option was added. The sizing and scaling of the timeline is now better behaved, and less prone to graphical errors. ### Localization All text displayed in RSMM GUIs, as well as command feedback and RSMM-related system messages and action bar messages, is now localized. As of this update the only translations are for English (US), but translations for other languages are welcome. ### Legacy Observers Compatibility RSMM for Minecraft 1.10 and older is now compatible with the Legacy Observers mod. ## Fixes The following bugs were fixed: - Using the scroll wheel to scroll through the timeline is possible even if the timeline is not paused. - Repeat clicks in RSMM GUIs are ignored if the cursor stays still. - Meter groups desync when multiple meter updates are received in one tick. - Clipping issues in the Options and Default Meter Properties screens. - Sliders are unresponsive and laggy (in Minecraft 1.12 and older). - Meter groups desync when the timeline is paused or in focus mode. - Meter name tags render behind blocks in some versions. - Meter highlights do not render at all with *Fabulous!* graphics.

# 1.16 ## Features ### Saved Meter Group Indicator When you load a saved meter group, an indicator will appear next to the meter group name, indicating which slot the meter group was loaded from, and whether the meter group has been modified since it was loaded. ### Auto-complete in text fields Some text fields in RSMM GUIs now have auto-complete. Auto-complete suggestions typically appear in a menu below the text fields, which can be navigated with the arrow keys. Pressing tab or return will insert the selected suggestion into the text field. ### Default Meter Properties screen This GUI has been tweaked to make it less confusing to use. ### Timeline sizing and scaling Behavior of the "Column Width" and "Row Height" options has been overhauled, and a "Cell Scale" option was added. The sizing and scaling of the timeline is now better behaved, and less prone to graphical errors. ### Localization All text displayed in RSMM GUIs, as well as command feedback and RSMM-related system messages and action bar messages, is now localized. As of this update the only translations are for English (US), but translations for other languages are welcome. ### Legacy Observers Compatibility RSMM for Minecraft 1.10 and older is now compatible with the Legacy Observers mod. ## Fixes The following bugs were fixed: - Using the scroll wheel to scroll through the timeline is possible even if the timeline is not paused. - Repeat clicks in RSMM GUIs are ignored if the cursor stays still. - Meter groups desync when multiple meter updates are received in one tick. - Clipping issues in the Options and Default Meter Properties screens. - Sliders are unresponsive and laggy (in Minecraft 1.12 and older). - Meter groups desync when the timeline is paused or in focus mode. - Meter name tags render behind blocks in some versions. - Meter highlights do not render at all with *Fabulous!* graphics.

# 1.16 ## Features ### Saved Meter Group Indicator When you load a saved meter group, an indicator will appear next to the meter group name, indicating which slot the meter group was loaded from, and whether the meter group has been modified since it was loaded. ### Auto-complete in text fields Some text fields in RSMM GUIs now have auto-complete. Auto-complete suggestions typically appear in a menu below the text fields, which can be navigated with the arrow keys. Pressing tab or return will insert the selected suggestion into the text field. ### Default Meter Properties screen This GUI has been tweaked to make it less confusing to use. ### Timeline sizing and scaling Behavior of the "Column Width" and "Row Height" options has been overhauled, and a "Cell Scale" option was added. The sizing and scaling of the timeline is now better behaved, and less prone to graphical errors. ### Localization All text displayed in RSMM GUIs, as well as command feedback and RSMM-related system messages and action bar messages, is now localized. As of this update the only translations are for English (US), but translations for other languages are welcome. ### Legacy Observers Compatibility RSMM for Minecraft 1.10 and older is now compatible with the Legacy Observers mod. ## Fixes The following bugs were fixed: - Using the scroll wheel to scroll through the timeline is possible even if the timeline is not paused. - Repeat clicks in RSMM GUIs are ignored if the cursor stays still. - Meter groups desync when multiple meter updates are received in one tick. - Clipping issues in the Options and Default Meter Properties screens. - Sliders are unresponsive and laggy (in Minecraft 1.12 and older). - Meter groups desync when the timeline is paused or in focus mode. - Meter name tags render behind blocks in some versions. - Meter highlights do not render at all with *Fabulous!* graphics.

# 1.16 ## Features ### Saved Meter Group Indicator When you load a saved meter group, an indicator will appear next to the meter group name, indicating which slot the meter group was loaded from, and whether the meter group has been modified since it was loaded. ### Auto-complete in text fields Some text fields in RSMM GUIs now have auto-complete. Auto-complete suggestions typically appear in a menu below the text fields, which can be navigated with the arrow keys. Pressing tab or return will insert the selected suggestion into the text field. ### Default Meter Properties screen This GUI has been tweaked to make it less confusing to use. ### Timeline sizing and scaling Behavior of the "Column Width" and "Row Height" options has been overhauled, and a "Cell Scale" option was added. The sizing and scaling of the timeline is now better behaved, and less prone to graphical errors. ### Localization All text displayed in RSMM GUIs, as well as command feedback and RSMM-related system messages and action bar messages, is now localized. As of this update the only translations are for English (US), but translations for other languages are welcome. ### Legacy Observers Compatibility RSMM for Minecraft 1.10 and older is now compatible with the Legacy Observers mod. ## Fixes The following bugs were fixed: - Using the scroll wheel to scroll through the timeline is possible even if the timeline is not paused. - Repeat clicks in RSMM GUIs are ignored if the cursor stays still. - Meter groups desync when multiple meter updates are received in one tick. - Clipping issues in the Options and Default Meter Properties screens. - Sliders are unresponsive and laggy (in Minecraft 1.12 and older). - Meter groups desync when the timeline is paused or in focus mode. - Meter name tags render behind blocks in some versions. - Meter highlights do not render at all with *Fabulous!* graphics.

# 1.16 ## Features ### Saved Meter Group Indicator When you load a saved meter group, an indicator will appear next to the meter group name, indicating which slot the meter group was loaded from, and whether the meter group has been modified since it was loaded. ### Auto-complete in text fields Some text fields in RSMM GUIs now have auto-complete. Auto-complete suggestions typically appear in a menu below the text fields, which can be navigated with the arrow keys. Pressing tab or return will insert the selected suggestion into the text field. ### Default Meter Properties screen This GUI has been tweaked to make it less confusing to use. ### Timeline sizing and scaling Behavior of the "Column Width" and "Row Height" options has been overhauled, and a "Cell Scale" option was added. The sizing and scaling of the timeline is now better behaved, and less prone to graphical errors. ### Localization All text displayed in RSMM GUIs, as well as command feedback and RSMM-related system messages and action bar messages, is now localized. As of this update the only translations are for English (US), but translations for other languages are welcome. ### Legacy Observers Compatibility RSMM for Minecraft 1.10 and older is now compatible with the Legacy Observers mod. ## Fixes The following bugs were fixed: - Using the scroll wheel to scroll through the timeline is possible even if the timeline is not paused. - Repeat clicks in RSMM GUIs are ignored if the cursor stays still. - Meter groups desync when multiple meter updates are received in one tick. - Clipping issues in the Options and Default Meter Properties screens. - Sliders are unresponsive and laggy (in Minecraft 1.12 and older). - Meter groups desync when the timeline is paused or in focus mode. - Meter name tags render behind blocks in some versions. - Meter highlights do not render at all with *Fabulous!* graphics.

# 1.16 ## Features ### Saved Meter Group Indicator When you load a saved meter group, an indicator will appear next to the meter group name, indicating which slot the meter group was loaded from, and whether the meter group has been modified since it was loaded. ### Auto-complete in text fields Some text fields in RSMM GUIs now have auto-complete. Auto-complete suggestions typically appear in a menu below the text fields, which can be navigated with the arrow keys. Pressing tab or return will insert the selected suggestion into the text field. ### Default Meter Properties screen This GUI has been tweaked to make it less confusing to use. ### Timeline sizing and scaling Behavior of the "Column Width" and "Row Height" options has been overhauled, and a "Cell Scale" option was added. The sizing and scaling of the timeline is now better behaved, and less prone to graphical errors. ### Localization All text displayed in RSMM GUIs, as well as command feedback and RSMM-related system messages and action bar messages, is now localized. As of this update the only translations are for English (US), but translations for other languages are welcome. ### Legacy Observers Compatibility RSMM for Minecraft 1.10 and older is now compatible with the Legacy Observers mod. ## Fixes The following bugs were fixed: - Using the scroll wheel to scroll through the timeline is possible even if the timeline is not paused. - Repeat clicks in RSMM GUIs are ignored if the cursor stays still. - Meter groups desync when multiple meter updates are received in one tick. - Clipping issues in the Options and Default Meter Properties screens. - Sliders are unresponsive and laggy (in Minecraft 1.12 and older). - Meter groups desync when the timeline is paused or in focus mode. - Meter name tags render behind blocks in some versions. - Meter highlights do not render at all with *Fabulous!* graphics.

# 1.16 ## Features ### Saved Meter Group Indicator When you load a saved meter group, an indicator will appear next to the meter group name, indicating which slot the meter group was loaded from, and whether the meter group has been modified since it was loaded. ### Auto-complete in text fields Some text fields in RSMM GUIs now have auto-complete. Auto-complete suggestions typically appear in a menu below the text fields, which can be navigated with the arrow keys. Pressing tab or return will insert the selected suggestion into the text field. ### Default Meter Properties screen This GUI has been tweaked to make it less confusing to use. ### Timeline sizing and scaling Behavior of the "Column Width" and "Row Height" options has been overhauled, and a "Cell Scale" option was added. The sizing and scaling of the timeline is now better behaved, and less prone to graphical errors. ### Localization All text displayed in RSMM GUIs, as well as command feedback and RSMM-related system messages and action bar messages, is now localized. As of this update the only translations are for English (US), but translations for other languages are welcome. ### Legacy Observers Compatibility RSMM for Minecraft 1.10 and older is now compatible with the Legacy Observers mod. ## Fixes The following bugs were fixed: - Using the scroll wheel to scroll through the timeline is possible even if the timeline is not paused. - Repeat clicks in RSMM GUIs are ignored if the cursor stays still. - Meter groups desync when multiple meter updates are received in one tick. - Clipping issues in the Options and Default Meter Properties screens. - Sliders are unresponsive and laggy (in Minecraft 1.12 and older). - Meter groups desync when the timeline is paused or in focus mode. - Meter name tags render behind blocks in some versions. - Meter highlights do not render at all with *Fabulous!* graphics.

# 1.16 ## Features ### Saved Meter Group Indicator When you load a saved meter group, an indicator will appear next to the meter group name, indicating which slot the meter group was loaded from, and whether the meter group has been modified since it was loaded. ### Auto-complete in text fields Some text fields in RSMM GUIs now have auto-complete. Auto-complete suggestions typically appear in a menu below the text fields, which can be navigated with the arrow keys. Pressing tab or return will insert the selected suggestion into the text field. ### Default Meter Properties screen This GUI has been tweaked to make it less confusing to use. ### Timeline sizing and scaling Behavior of the "Column Width" and "Row Height" options has been overhauled, and a "Cell Scale" option was added. The sizing and scaling of the timeline is now better behaved, and less prone to graphical errors. ### Localization All text displayed in RSMM GUIs, as well as command feedback and RSMM-related system messages and action bar messages, is now localized. As of this update the only translations are for English (US), but translations for other languages are welcome. ### Legacy Observers Compatibility RSMM for Minecraft 1.10 and older is now compatible with the Legacy Observers mod. ## Fixes The following bugs were fixed: - Using the scroll wheel to scroll through the timeline is possible even if the timeline is not paused. - Repeat clicks in RSMM GUIs are ignored if the cursor stays still. - Meter groups desync when multiple meter updates are received in one tick. - Clipping issues in the Options and Default Meter Properties screens. - Sliders are unresponsive and laggy (in Minecraft 1.12 and older). - Meter groups desync when the timeline is paused or in focus mode. - Meter name tags render behind blocks in some versions. - Meter highlights do not render at all with *Fabulous!* graphics.

# 1.16 ## Features ### Saved Meter Group Indicator When you load a saved meter group, an indicator will appear next to the meter group name, indicating which slot the meter group was loaded from, and whether the meter group has been modified since it was loaded. ### Auto-complete in text fields Some text fields in RSMM GUIs now have auto-complete. Auto-complete suggestions typically appear in a menu below the text fields, which can be navigated with the arrow keys. Pressing tab or return will insert the selected suggestion into the text field. ### Default Meter Properties screen This GUI has been tweaked to make it less confusing to use. ### Timeline sizing and scaling Behavior of the "Column Width" and "Row Height" options has been overhauled, and a "Cell Scale" option was added. The sizing and scaling of the timeline is now better behaved, and less prone to graphical errors. ### Localization All text displayed in RSMM GUIs, as well as command feedback and RSMM-related system messages and action bar messages, is now localized. As of this update the only translations are for English (US), but translations for other languages are welcome. ### Legacy Observers Compatibility RSMM for Minecraft 1.10 and older is now compatible with the Legacy Observers mod. ## Fixes The following bugs were fixed: - Using the scroll wheel to scroll through the timeline is possible even if the timeline is not paused. - Repeat clicks in RSMM GUIs are ignored if the cursor stays still. - Meter groups desync when multiple meter updates are received in one tick. - Clipping issues in the Options and Default Meter Properties screens. - Sliders are unresponsive and laggy (in Minecraft 1.12 and older). - Meter groups desync when the timeline is paused or in focus mode. - Meter name tags render behind blocks in some versions. - Meter highlights do not render at all with *Fabulous!* graphics.

# 1.16 ## Features ### Saved Meter Group Indicator When you load a saved meter group, an indicator will appear next to the meter group name, indicating which slot the meter group was loaded from, and whether the meter group has been modified since it was loaded. ### Auto-complete in text fields Some text fields in RSMM GUIs now have auto-complete. Auto-complete suggestions typically appear in a menu below the text fields, which can be navigated with the arrow keys. Pressing tab or return will insert the selected suggestion into the text field. ### Default Meter Properties screen This GUI has been tweaked to make it less confusing to use. ### Timeline sizing and scaling Behavior of the "Column Width" and "Row Height" options has been overhauled, and a "Cell Scale" option was added. The sizing and scaling of the timeline is now better behaved, and less prone to graphical errors. ### Localization All text displayed in RSMM GUIs, as well as command feedback and RSMM-related system messages and action bar messages, is now localized. As of this update the only translations are for English (US), but translations for other languages are welcome. ### Legacy Observers Compatibility RSMM for Minecraft 1.10 and older is now compatible with the Legacy Observers mod. ## Fixes The following bugs were fixed: - Using the scroll wheel to scroll through the timeline is possible even if the timeline is not paused. - Repeat clicks in RSMM GUIs are ignored if the cursor stays still. - Meter groups desync when multiple meter updates are received in one tick. - Clipping issues in the Options and Default Meter Properties screens. - Sliders are unresponsive and laggy (in Minecraft 1.12 and older). - Meter groups desync when the timeline is paused or in focus mode. - Meter name tags render behind blocks in some versions. - Meter highlights do not render at all with *Fabulous!* graphics.

# 1.16 ## Features ### Saved Meter Group Indicator When you load a saved meter group, an indicator will appear next to the meter group name, indicating which slot the meter group was loaded from, and whether the meter group has been modified since it was loaded. ### Auto-complete in text fields Some text fields in RSMM GUIs now have auto-complete. Auto-complete suggestions typically appear in a menu below the text fields, which can be navigated with the arrow keys. Pressing tab or return will insert the selected suggestion into the text field. ### Default Meter Properties screen This GUI has been tweaked to make it less confusing to use. ### Timeline sizing and scaling Behavior of the "Column Width" and "Row Height" options has been overhauled, and a "Cell Scale" option was added. The sizing and scaling of the timeline is now better behaved, and less prone to graphical errors. ### Localization All text displayed in RSMM GUIs, as well as command feedback and RSMM-related system messages and action bar messages, is now localized. As of this update the only translations are for English (US), but translations for other languages are welcome. ### Legacy Observers Compatibility RSMM for Minecraft 1.10 and older is now compatible with the Legacy Observers mod. ## Fixes The following bugs were fixed: - Using the scroll wheel to scroll through the timeline is possible even if the timeline is not paused. - Repeat clicks in RSMM GUIs are ignored if the cursor stays still. - Meter groups desync when multiple meter updates are received in one tick. - Clipping issues in the Options and Default Meter Properties screens. - Sliders are unresponsive and laggy (in Minecraft 1.12 and older). - Meter groups desync when the timeline is paused or in focus mode. - Meter name tags render behind blocks in some versions. - Meter highlights do not render at all with *Fabulous!* graphics.

# 1.16 ## Features ### Saved Meter Group Indicator When you load a saved meter group, an indicator will appear next to the meter group name, indicating which slot the meter group was loaded from, and whether the meter group has been modified since it was loaded. ### Auto-complete in text fields Some text fields in RSMM GUIs now have auto-complete. Auto-complete suggestions typically appear in a menu below the text fields, which can be navigated with the arrow keys. Pressing tab or return will insert the selected suggestion into the text field. ### Default Meter Properties screen This GUI has been tweaked to make it less confusing to use. ### Timeline sizing and scaling Behavior of the "Column Width" and "Row Height" options has been overhauled, and a "Cell Scale" option was added. The sizing and scaling of the timeline is now better behaved, and less prone to graphical errors. ### Localization All text displayed in RSMM GUIs, as well as command feedback and RSMM-related system messages and action bar messages, is now localized. As of this update the only translations are for English (US), but translations for other languages are welcome. ### Legacy Observers Compatibility RSMM for Minecraft 1.10 and older is now compatible with the Legacy Observers mod. ## Fixes The following bugs were fixed: - Using the scroll wheel to scroll through the timeline is possible even if the timeline is not paused. - Repeat clicks in RSMM GUIs are ignored if the cursor stays still. - Meter groups desync when multiple meter updates are received in one tick. - Clipping issues in the Options and Default Meter Properties screens. - Sliders are unresponsive and laggy (in Minecraft 1.12 and older). - Meter groups desync when the timeline is paused or in focus mode. - Meter name tags render behind blocks in some versions. - Meter highlights do not render at all with *Fabulous!* graphics.

# 1.16 ## Features ### Saved Meter Group Indicator When you load a saved meter group, an indicator will appear next to the meter group name, indicating which slot the meter group was loaded from, and whether the meter group has been modified since it was loaded. ### Auto-complete in text fields Some text fields in RSMM GUIs now have auto-complete. Auto-complete suggestions typically appear in a menu below the text fields, which can be navigated with the arrow keys. Pressing tab or return will insert the selected suggestion into the text field. ### Default Meter Properties screen This GUI has been tweaked to make it less confusing to use. ### Timeline sizing and scaling Behavior of the "Column Width" and "Row Height" options has been overhauled, and a "Cell Scale" option was added. The sizing and scaling of the timeline is now better behaved, and less prone to graphical errors. ### Localization All text displayed in RSMM GUIs, as well as command feedback and RSMM-related system messages and action bar messages, is now localized. As of this update the only translations are for English (US), but translations for other languages are welcome. ### Legacy Observers Compatibility RSMM for Minecraft 1.10 and older is now compatible with the Legacy Observers mod. ## Fixes The following bugs were fixed: - Using the scroll wheel to scroll through the timeline is possible even if the timeline is not paused. - Repeat clicks in RSMM GUIs are ignored if the cursor stays still. - Meter groups desync when multiple meter updates are received in one tick. - Clipping issues in the Options and Default Meter Properties screens. - Sliders are unresponsive and laggy (in Minecraft 1.12 and older). - Meter groups desync when the timeline is paused or in focus mode. - Meter name tags render behind blocks in some versions. - Meter highlights do not render at all with *Fabulous!* graphics.

# 1.16 ## Features ### Saved Meter Group Indicator When you load a saved meter group, an indicator will appear next to the meter group name, indicating which slot the meter group was loaded from, and whether the meter group has been modified since it was loaded. ### Auto-complete in text fields Some text fields in RSMM GUIs now have auto-complete. Auto-complete suggestions typically appear in a menu below the text fields, which can be navigated with the arrow keys. Pressing tab or return will insert the selected suggestion into the text field. ### Default Meter Properties screen This GUI has been tweaked to make it less confusing to use. ### Timeline sizing and scaling Behavior of the "Column Width" and "Row Height" options has been overhauled, and a "Cell Scale" option was added. The sizing and scaling of the timeline is now better behaved, and less prone to graphical errors. ### Localization All text displayed in RSMM GUIs, as well as command feedback and RSMM-related system messages and action bar messages, is now localized. As of this update the only translations are for English (US), but translations for other languages are welcome. ### Legacy Observers Compatibility RSMM for Minecraft 1.10 and older is now compatible with the Legacy Observers mod. ## Fixes The following bugs were fixed: - Using the scroll wheel to scroll through the timeline is possible even if the timeline is not paused. - Repeat clicks in RSMM GUIs are ignored if the cursor stays still. - Meter groups desync when multiple meter updates are received in one tick. - Clipping issues in the Options and Default Meter Properties screens. - Sliders are unresponsive and laggy (in Minecraft 1.12 and older). - Meter groups desync when the timeline is paused or in focus mode. - Meter name tags render behind blocks in some versions. - Meter highlights do not render at all with *Fabulous!* graphics.

# 1.16 ## Features ### Saved Meter Group Indicator When you load a saved meter group, an indicator will appear next to the meter group name, indicating which slot the meter group was loaded from, and whether the meter group has been modified since it was loaded. ### Auto-complete in text fields Some text fields in RSMM GUIs now have auto-complete. Auto-complete suggestions typically appear in a menu below the text fields, which can be navigated with the arrow keys. Pressing tab or return will insert the selected suggestion into the text field. ### Default Meter Properties screen This GUI has been tweaked to make it less confusing to use. ### Timeline sizing and scaling Behavior of the "Column Width" and "Row Height" options has been overhauled, and a "Cell Scale" option was added. The sizing and scaling of the timeline is now better behaved, and less prone to graphical errors. ### Localization All text displayed in RSMM GUIs, as well as command feedback and RSMM-related system messages and action bar messages, is now localized. As of this update the only translations are for English (US), but translations for other languages are welcome. ### Legacy Observers Compatibility RSMM for Minecraft 1.10 and older is now compatible with the Legacy Observers mod. ## Fixes The following bugs were fixed: - Using the scroll wheel to scroll through the timeline is possible even if the timeline is not paused. - Repeat clicks in RSMM GUIs are ignored if the cursor stays still. - Meter groups desync when multiple meter updates are received in one tick. - Clipping issues in the Options and Default Meter Properties screens. - Sliders are unresponsive and laggy (in Minecraft 1.12 and older). - Meter groups desync when the timeline is paused or in focus mode. - Meter name tags render behind blocks in some versions. - Meter highlights do not render at all with *Fabulous!* graphics.

# 1.16 ## Features ### Saved Meter Group Indicator When you load a saved meter group, an indicator will appear next to the meter group name, indicating which slot the meter group was loaded from, and whether the meter group has been modified since it was loaded. ### Auto-complete in text fields Some text fields in RSMM GUIs now have auto-complete. Auto-complete suggestions typically appear in a menu below the text fields, which can be navigated with the arrow keys. Pressing tab or return will insert the selected suggestion into the text field. ### Default Meter Properties screen This GUI has been tweaked to make it less confusing to use. ### Timeline sizing and scaling Behavior of the "Column Width" and "Row Height" options has been overhauled, and a "Cell Scale" option was added. The sizing and scaling of the timeline is now better behaved, and less prone to graphical errors. ### Localization All text displayed in RSMM GUIs, as well as command feedback and RSMM-related system messages and action bar messages, is now localized. As of this update the only translations are for English (US), but translations for other languages are welcome. ### Legacy Observers Compatibility RSMM for Minecraft 1.10 and older is now compatible with the Legacy Observers mod. ## Fixes The following bugs were fixed: - Using the scroll wheel to scroll through the timeline is possible even if the timeline is not paused. - Repeat clicks in RSMM GUIs are ignored if the cursor stays still. - Meter groups desync when multiple meter updates are received in one tick. - Clipping issues in the Options and Default Meter Properties screens. - Sliders are unresponsive and laggy (in Minecraft 1.12 and older). - Meter groups desync when the timeline is paused or in focus mode. - Meter name tags render behind blocks in some versions. - Meter highlights do not render at all with *Fabulous!* graphics.

# 1.16 ## Features ### Saved Meter Group Indicator When you load a saved meter group, an indicator will appear next to the meter group name, indicating which slot the meter group was loaded from, and whether the meter group has been modified since it was loaded. ### Auto-complete in text fields Some text fields in RSMM GUIs now have auto-complete. Auto-complete suggestions typically appear in a menu below the text fields, which can be navigated with the arrow keys. Pressing tab or return will insert the selected suggestion into the text field. ### Default Meter Properties screen This GUI has been tweaked to make it less confusing to use. ### Timeline sizing and scaling Behavior of the "Column Width" and "Row Height" options has been overhauled, and a "Cell Scale" option was added. The sizing and scaling of the timeline is now better behaved, and less prone to graphical errors. ### Localization All text displayed in RSMM GUIs, as well as command feedback and RSMM-related system messages and action bar messages, is now localized. As of this update the only translations are for English (US), but translations for other languages are welcome. ### Legacy Observers Compatibility RSMM for Minecraft 1.10 and older is now compatible with the Legacy Observers mod. ## Fixes The following bugs were fixed: - Using the scroll wheel to scroll through the timeline is possible even if the timeline is not paused. - Repeat clicks in RSMM GUIs are ignored if the cursor stays still. - Meter groups desync when multiple meter updates are received in one tick. - Clipping issues in the Options and Default Meter Properties screens. - Sliders are unresponsive and laggy (in Minecraft 1.12 and older). - Meter groups desync when the timeline is paused or in focus mode. - Meter name tags render behind blocks in some versions. - Meter highlights do not render at all with *Fabulous!* graphics.

# 1.16 ## Features ### Saved Meter Group Indicator When you load a saved meter group, an indicator will appear next to the meter group name, indicating which slot the meter group was loaded from, and whether the meter group has been modified since it was loaded. ### Auto-complete in text fields Some text fields in RSMM GUIs now have auto-complete. Auto-complete suggestions typically appear in a menu below the text fields, which can be navigated with the arrow keys. Pressing tab or return will insert the selected suggestion into the text field. ### Default Meter Properties screen This GUI has been tweaked to make it less confusing to use. ### Timeline sizing and scaling Behavior of the "Column Width" and "Row Height" options has been overhauled, and a "Cell Scale" option was added. The sizing and scaling of the timeline is now better behaved, and less prone to graphical errors. ### Localization All text displayed in RSMM GUIs, as well as command feedback and RSMM-related system messages and action bar messages, is now localized. As of this update the only translations are for English (US), but translations for other languages are welcome. ### Legacy Observers Compatibility RSMM for Minecraft 1.10 and older is now compatible with the Legacy Observers mod. ## Fixes The following bugs were fixed: - Using the scroll wheel to scroll through the timeline is possible even if the timeline is not paused. - Repeat clicks in RSMM GUIs are ignored if the cursor stays still. - Meter groups desync when multiple meter updates are received in one tick. - Clipping issues in the Options and Default Meter Properties screens. - Sliders are unresponsive and laggy (in Minecraft 1.12 and older). - Meter groups desync when the timeline is paused or in focus mode. - Meter name tags render behind blocks in some versions. - Meter highlights do not render at all with *Fabulous!* graphics.

# 1.16 ## Features ### Saved Meter Group Indicator When you load a saved meter group, an indicator will appear next to the meter group name, indicating which slot the meter group was loaded from, and whether the meter group has been modified since it was loaded. ### Auto-complete in text fields Some text fields in RSMM GUIs now have auto-complete. Auto-complete suggestions typically appear in a menu below the text fields, which can be navigated with the arrow keys. Pressing tab or return will insert the selected suggestion into the text field. ### Default Meter Properties screen This GUI has been tweaked to make it less confusing to use. ### Timeline sizing and scaling Behavior of the "Column Width" and "Row Height" options has been overhauled, and a "Cell Scale" option was added. The sizing and scaling of the timeline is now better behaved, and less prone to graphical errors. ### Localization All text displayed in RSMM GUIs, as well as command feedback and RSMM-related system messages and action bar messages, is now localized. As of this update the only translations are for English (US), but translations for other languages are welcome. ### Legacy Observers Compatibility RSMM for Minecraft 1.10 and older is now compatible with the Legacy Observers mod. ## Fixes The following bugs were fixed: - Using the scroll wheel to scroll through the timeline is possible even if the timeline is not paused. - Repeat clicks in RSMM GUIs are ignored if the cursor stays still. - Meter groups desync when multiple meter updates are received in one tick. - Clipping issues in the Options and Default Meter Properties screens. - Sliders are unresponsive and laggy (in Minecraft 1.12 and older). - Meter groups desync when the timeline is paused or in focus mode. - Meter name tags render behind blocks in some versions. - Meter highlights do not render at all with *Fabulous!* graphics.

# 1.16 ## Features ### Saved Meter Group Indicator When you load a saved meter group, an indicator will appear next to the meter group name, indicating which slot the meter group was loaded from, and whether the meter group has been modified since it was loaded. ### Auto-complete in text fields Some text fields in RSMM GUIs now have auto-complete. Auto-complete suggestions typically appear in a menu below the text fields, which can be navigated with the arrow keys. Pressing tab or return will insert the selected suggestion into the text field. ### Default Meter Properties screen This GUI has been tweaked to make it less confusing to use. ### Timeline sizing and scaling Behavior of the "Column Width" and "Row Height" options has been overhauled, and a "Cell Scale" option was added. The sizing and scaling of the timeline is now better behaved, and less prone to graphical errors. ### Localization All text displayed in RSMM GUIs, as well as command feedback and RSMM-related system messages and action bar messages, is now localized. As of this update the only translations are for English (US), but translations for other languages are welcome. ### Legacy Observers Compatibility RSMM for Minecraft 1.10 and older is now compatible with the Legacy Observers mod. ## Fixes The following bugs were fixed: - Using the scroll wheel to scroll through the timeline is possible even if the timeline is not paused. - Repeat clicks in RSMM GUIs are ignored if the cursor stays still. - Meter groups desync when multiple meter updates are received in one tick. - Clipping issues in the Options and Default Meter Properties screens. - Sliders are unresponsive and laggy (in Minecraft 1.12 and older). - Meter groups desync when the timeline is paused or in focus mode. - Meter name tags render behind blocks in some versions. - Meter highlights do not render at all with *Fabulous!* graphics.

# 1.16 ## Features ### Saved Meter Group Indicator When you load a saved meter group, an indicator will appear next to the meter group name, indicating which slot the meter group was loaded from, and whether the meter group has been modified since it was loaded. ### Auto-complete in text fields Some text fields in RSMM GUIs now have auto-complete. Auto-complete suggestions typically appear in a menu below the text fields, which can be navigated with the arrow keys. Pressing tab or return will insert the selected suggestion into the text field. ### Default Meter Properties screen This GUI has been tweaked to make it less confusing to use. ### Timeline sizing and scaling Behavior of the "Column Width" and "Row Height" options has been overhauled, and a "Cell Scale" option was added. The sizing and scaling of the timeline is now better behaved, and less prone to graphical errors. ### Localization All text displayed in RSMM GUIs, as well as command feedback and RSMM-related system messages and action bar messages, is now localized. As of this update the only translations are for English (US), but translations for other languages are welcome. ### Legacy Observers Compatibility RSMM for Minecraft 1.10 and older is now compatible with the Legacy Observers mod. ## Fixes The following bugs were fixed: - Using the scroll wheel to scroll through the timeline is possible even if the timeline is not paused. - Repeat clicks in RSMM GUIs are ignored if the cursor stays still. - Meter groups desync when multiple meter updates are received in one tick. - Clipping issues in the Options and Default Meter Properties screens. - Sliders are unresponsive and laggy (in Minecraft 1.12 and older). - Meter groups desync when the timeline is paused or in focus mode. - Meter name tags render behind blocks in some versions. - Meter highlights do not render at all with *Fabulous!* graphics.

# 1.15.1 now compatible with subtick 2.1.1

# 1.15.1 now compatible with subtick 2.1.1

# 1.15.1 now compatible with subtick 2.1.1

# 1.15.1 now compatible with subtick 2.1.1

# 1.15.1 now compatible with subtick 2.1.1

# 1.15.0 Updated to Minecraft 1.21.5

# 1.15.1 Fixed server crashes when players with RSMM installed join.

# 1.15.1 Fixed server crashes when players with RSMM installed join.

# 1.15.1 Fixed server crashes when players with RSMM installed join.

# 1.15.1 Fixed server crashes when players with RSMM installed join.

Updated to Minecraft 1.21.4

# 1.15.0 Updated to Minecraft 1.21.2 and 1.21.3

# 1.15 ## Saved Meter Groups This feature allows you to save meter groups client side, which you can then load on any world at any time. Very handy if you need the same meter group across multiple game sessions! - There are 9 slots you can save a meter group to. - Holding the *Save Meter Group* key and pressing one of the number keys, your current meter group will be saved to that slot. - If you are currently not subscribed to any meter group, it will clear that slot. - Holding the *Load Meter Group* key and pressing one of the number keys, the meter group saved to that slot will be loaded and you will be subscribed to that meter group. - If the meter group already exists, it will be replaced with the saved meter group. - If the slot is empty, you will unsubscribed from your current meter group. The saved meter groups are stored in NBT format at `.minecraft/config/redstone_multimeter/saved_meter_groups.nbt`. ### Preview - When the *Preview Meter Groups* option is enabled, holding the *Load Meter Group* key and pressing a number key will not immediately load the meter group from that slot, but preview that meter group. - The HUD will display that meter group, and its meters will be rendered in the world. - Pressing the same number key again will then load the meter group and subscribe you to it. - Letting go of the *Load Meter Group* key will stop previewing the meter group. ## Focus Mode *Focus mode* is a new feature that allows you to focus on individual events in the timeline. This makes it easier to follow the events within a given time frame. - When enabled, the HUD will be paused and a single event in the subtick overview will be highlighted. - The *Step Forward* and *Step Backward* keys can be used to step to the next or previous event in the timeline. - Hold `Ctrl` to skip forward an entire tick! - Details of the highlighted event will be displayed next to the subtick overview. - Only the meter corresponding to the highlighted event will be rendered in the world. ## Meter Name Tags This version adds options to enable meter name tags. These name tags render inside the meter highlight in the world. Meter name tags can be enabled with the *Render Meter Names* option, which has the following possible values: - Never: never render meter name tags. - Always: always render meter name tags. - In Focus Mode: render meter name tags only when in focus mode. - When Previewing: render meter name tags only when previewing a saved meter group. The range within which meter name tags are visible can be controlled with the *Meter Name Range* option. ## HUD When opening the meter controls for a meter in the Multimeter Screen, you can now use the up and down arrow keys to select the meter above or below the currently selected meter in the list. ## Fixes - On dedicated servers, the game was unable to save server-side options if the parent directory did not exist. This has been fixed.

# 1.15 ## Saved Meter Groups This feature allows you to save meter groups client side, which you can then load on any world at any time. Very handy if you need the same meter group across multiple game sessions! - There are 9 slots you can save a meter group to. - Holding the *Save Meter Group* key and pressing one of the number keys, your current meter group will be saved to that slot. - If you are currently not subscribed to any meter group, it will clear that slot. - Holding the *Load Meter Group* key and pressing one of the number keys, the meter group saved to that slot will be loaded and you will be subscribed to that meter group. - If the meter group already exists, it will be replaced with the saved meter group. - If the slot is empty, you will unsubscribed from your current meter group. The saved meter groups are stored in NBT format at `.minecraft/config/redstone_multimeter/saved_meter_groups.nbt`. ### Preview - When the *Preview Meter Groups* option is enabled, holding the *Load Meter Group* key and pressing a number key will not immediately load the meter group from that slot, but preview that meter group. - The HUD will display that meter group, and its meters will be rendered in the world. - Pressing the same number key again will then load the meter group and subscribe you to it. - Letting go of the *Load Meter Group* key will stop previewing the meter group. ## Focus Mode *Focus mode* is a new feature that allows you to focus on individual events in the timeline. This makes it easier to follow the events within a given time frame. - When enabled, the HUD will be paused and a single event in the subtick overview will be highlighted. - The *Step Forward* and *Step Backward* keys can be used to step to the next or previous event in the timeline. - Hold `Ctrl` to skip forward an entire tick! - Details of the highlighted event will be displayed next to the subtick overview. - Only the meter corresponding to the highlighted event will be rendered in the world. ## Meter Name Tags This version adds options to enable meter name tags. These name tags render inside the meter highlight in the world. Meter name tags can be enabled with the *Render Meter Names* option, which has the following possible values: - Never: never render meter name tags. - Always: always render meter name tags. - In Focus Mode: render meter name tags only when in focus mode. - When Previewing: render meter name tags only when previewing a saved meter group. The range within which meter name tags are visible can be controlled with the *Meter Name Range* option. ## HUD When opening the meter controls for a meter in the Multimeter Screen, you can now use the up and down arrow keys to select the meter above or below the currently selected meter in the list. ## Fixes - On dedicated servers, the game was unable to save server-side options if the parent directory did not exist. This has been fixed.

# 1.15 ## Saved Meter Groups This feature allows you to save meter groups client side, which you can then load on any world at any time. Very handy if you need the same meter group across multiple game sessions! - There are 9 slots you can save a meter group to. - Holding the *Save Meter Group* key and pressing one of the number keys, your current meter group will be saved to that slot. - If you are currently not subscribed to any meter group, it will clear that slot. - Holding the *Load Meter Group* key and pressing one of the number keys, the meter group saved to that slot will be loaded and you will be subscribed to that meter group. - If the meter group already exists, it will be replaced with the saved meter group. - If the slot is empty, you will unsubscribed from your current meter group. The saved meter groups are stored in NBT format at `.minecraft/config/redstone_multimeter/saved_meter_groups.nbt`. ### Preview - When the *Preview Meter Groups* option is enabled, holding the *Load Meter Group* key and pressing a number key will not immediately load the meter group from that slot, but preview that meter group. - The HUD will display that meter group, and its meters will be rendered in the world. - Pressing the same number key again will then load the meter group and subscribe you to it. - Letting go of the *Load Meter Group* key will stop previewing the meter group. ## Focus Mode *Focus mode* is a new feature that allows you to focus on individual events in the timeline. This makes it easier to follow the events within a given time frame. - When enabled, the HUD will be paused and a single event in the subtick overview will be highlighted. - The *Step Forward* and *Step Backward* keys can be used to step to the next or previous event in the timeline. - Hold `Ctrl` to skip forward an entire tick! - Details of the highlighted event will be displayed next to the subtick overview. - Only the meter corresponding to the highlighted event will be rendered in the world. ## Meter Name Tags This version adds options to enable meter name tags. These name tags render inside the meter highlight in the world. Meter name tags can be enabled with the *Render Meter Names* option, which has the following possible values: - Never: never render meter name tags. - Always: always render meter name tags. - In Focus Mode: render meter name tags only when in focus mode. - When Previewing: render meter name tags only when previewing a saved meter group. The range within which meter name tags are visible can be controlled with the *Meter Name Range* option. ## HUD When opening the meter controls for a meter in the Multimeter Screen, you can now use the up and down arrow keys to select the meter above or below the currently selected meter in the list. ## Fixes - On dedicated servers, the game was unable to save server-side options if the parent directory did not exist. This has been fixed.

# 1.15 ## Saved Meter Groups This feature allows you to save meter groups client side, which you can then load on any world at any time. Very handy if you need the same meter group across multiple game sessions! - There are 9 slots you can save a meter group to. - Holding the *Save Meter Group* key and pressing one of the number keys, your current meter group will be saved to that slot. - If you are currently not subscribed to any meter group, it will clear that slot. - Holding the *Load Meter Group* key and pressing one of the number keys, the meter group saved to that slot will be loaded and you will be subscribed to that meter group. - If the meter group already exists, it will be replaced with the saved meter group. - If the slot is empty, you will unsubscribed from your current meter group. The saved meter groups are stored in NBT format at `.minecraft/config/redstone_multimeter/saved_meter_groups.nbt`. ### Preview - When the *Preview Meter Groups* option is enabled, holding the *Load Meter Group* key and pressing a number key will not immediately load the meter group from that slot, but preview that meter group. - The HUD will display that meter group, and its meters will be rendered in the world. - Pressing the same number key again will then load the meter group and subscribe you to it. - Letting go of the *Load Meter Group* key will stop previewing the meter group. ## Focus Mode *Focus mode* is a new feature that allows you to focus on individual events in the timeline. This makes it easier to follow the events within a given time frame. - When enabled, the HUD will be paused and a single event in the subtick overview will be highlighted. - The *Step Forward* and *Step Backward* keys can be used to step to the next or previous event in the timeline. - Hold `Ctrl` to skip forward an entire tick! - Details of the highlighted event will be displayed next to the subtick overview. - Only the meter corresponding to the highlighted event will be rendered in the world. ## Meter Name Tags This version adds options to enable meter name tags. These name tags render inside the meter highlight in the world. Meter name tags can be enabled with the *Render Meter Names* option, which has the following possible values: - Never: never render meter name tags. - Always: always render meter name tags. - In Focus Mode: render meter name tags only when in focus mode. - When Previewing: render meter name tags only when previewing a saved meter group. The range within which meter name tags are visible can be controlled with the *Meter Name Range* option. ## HUD When opening the meter controls for a meter in the Multimeter Screen, you can now use the up and down arrow keys to select the meter above or below the currently selected meter in the list. ## Fixes - On dedicated servers, the game was unable to save server-side options if the parent directory did not exist. This has been fixed.

# 1.15 ## Saved Meter Groups This feature allows you to save meter groups client side, which you can then load on any world at any time. Very handy if you need the same meter group across multiple game sessions! - There are 9 slots you can save a meter group to. - Holding the *Save Meter Group* key and pressing one of the number keys, your current meter group will be saved to that slot. - If you are currently not subscribed to any meter group, it will clear that slot. - Holding the *Load Meter Group* key and pressing one of the number keys, the meter group saved to that slot will be loaded and you will be subscribed to that meter group. - If the meter group already exists, it will be replaced with the saved meter group. - If the slot is empty, you will unsubscribed from your current meter group. The saved meter groups are stored in NBT format at `.minecraft/config/redstone_multimeter/saved_meter_groups.nbt`. ### Preview - When the *Preview Meter Groups* option is enabled, holding the *Load Meter Group* key and pressing a number key will not immediately load the meter group from that slot, but preview that meter group. - The HUD will display that meter group, and its meters will be rendered in the world. - Pressing the same number key again will then load the meter group and subscribe you to it. - Letting go of the *Load Meter Group* key will stop previewing the meter group. ## Focus Mode *Focus mode* is a new feature that allows you to focus on individual events in the timeline. This makes it easier to follow the events within a given time frame. - When enabled, the HUD will be paused and a single event in the subtick overview will be highlighted. - The *Step Forward* and *Step Backward* keys can be used to step to the next or previous event in the timeline. - Hold `Ctrl` to skip forward an entire tick! - Details of the highlighted event will be displayed next to the subtick overview. - Only the meter corresponding to the highlighted event will be rendered in the world. ## Meter Name Tags This version adds options to enable meter name tags. These name tags render inside the meter highlight in the world. Meter name tags can be enabled with the *Render Meter Names* option, which has the following possible values: - Never: never render meter name tags. - Always: always render meter name tags. - In Focus Mode: render meter name tags only when in focus mode. - When Previewing: render meter name tags only when previewing a saved meter group. The range within which meter name tags are visible can be controlled with the *Meter Name Range* option. ## HUD When opening the meter controls for a meter in the Multimeter Screen, you can now use the up and down arrow keys to select the meter above or below the currently selected meter in the list. ## Fixes - On dedicated servers, the game was unable to save server-side options if the parent directory did not exist. This has been fixed.

# 1.15 ## Saved Meter Groups This feature allows you to save meter groups client side, which you can then load on any world at any time. Very handy if you need the same meter group across multiple game sessions! - There are 9 slots you can save a meter group to. - Holding the *Save Meter Group* key and pressing one of the number keys, your current meter group will be saved to that slot. - If you are currently not subscribed to any meter group, it will clear that slot. - Holding the *Load Meter Group* key and pressing one of the number keys, the meter group saved to that slot will be loaded and you will be subscribed to that meter group. - If the meter group already exists, it will be replaced with the saved meter group. - If the slot is empty, you will unsubscribed from your current meter group. The saved meter groups are stored in NBT format at `.minecraft/config/redstone_multimeter/saved_meter_groups.nbt`. ### Preview - When the *Preview Meter Groups* option is enabled, holding the *Load Meter Group* key and pressing a number key will not immediately load the meter group from that slot, but preview that meter group. - The HUD will display that meter group, and its meters will be rendered in the world. - Pressing the same number key again will then load the meter group and subscribe you to it. - Letting go of the *Load Meter Group* key will stop previewing the meter group. ## Focus Mode *Focus mode* is a new feature that allows you to focus on individual events in the timeline. This makes it easier to follow the events within a given time frame. - When enabled, the HUD will be paused and a single event in the subtick overview will be highlighted. - The *Step Forward* and *Step Backward* keys can be used to step to the next or previous event in the timeline. - Hold `Ctrl` to skip forward an entire tick! - Details of the highlighted event will be displayed next to the subtick overview. - Only the meter corresponding to the highlighted event will be rendered in the world. ## Meter Name Tags This version adds options to enable meter name tags. These name tags render inside the meter highlight in the world. Meter name tags can be enabled with the *Render Meter Names* option, which has the following possible values: - Never: never render meter name tags. - Always: always render meter name tags. - In Focus Mode: render meter name tags only when in focus mode. - When Previewing: render meter name tags only when previewing a saved meter group. The range within which meter name tags are visible can be controlled with the *Meter Name Range* option. ## HUD When opening the meter controls for a meter in the Multimeter Screen, you can now use the up and down arrow keys to select the meter above or below the currently selected meter in the list. ## Fixes - On dedicated servers, the game was unable to save server-side options if the parent directory did not exist. This has been fixed.

# 1.15 ## Saved Meter Groups This feature allows you to save meter groups client side, which you can then load on any world at any time. Very handy if you need the same meter group across multiple game sessions! - There are 9 slots you can save a meter group to. - Holding the *Save Meter Group* key and pressing one of the number keys, your current meter group will be saved to that slot. - If you are currently not subscribed to any meter group, it will clear that slot. - Holding the *Load Meter Group* key and pressing one of the number keys, the meter group saved to that slot will be loaded and you will be subscribed to that meter group. - If the meter group already exists, it will be replaced with the saved meter group. - If the slot is empty, you will unsubscribed from your current meter group. The saved meter groups are stored in NBT format at `.minecraft/config/redstone_multimeter/saved_meter_groups.nbt`. ### Preview - When the *Preview Meter Groups* option is enabled, holding the *Load Meter Group* key and pressing a number key will not immediately load the meter group from that slot, but preview that meter group. - The HUD will display that meter group, and its meters will be rendered in the world. - Pressing the same number key again will then load the meter group and subscribe you to it. - Letting go of the *Load Meter Group* key will stop previewing the meter group. ## Focus Mode *Focus mode* is a new feature that allows you to focus on individual events in the timeline. This makes it easier to follow the events within a given time frame. - When enabled, the HUD will be paused and a single event in the subtick overview will be highlighted. - The *Step Forward* and *Step Backward* keys can be used to step to the next or previous event in the timeline. - Hold `Ctrl` to skip forward an entire tick! - Details of the highlighted event will be displayed next to the subtick overview. - Only the meter corresponding to the highlighted event will be rendered in the world. ## Meter Name Tags This version adds options to enable meter name tags. These name tags render inside the meter highlight in the world. Meter name tags can be enabled with the *Render Meter Names* option, which has the following possible values: - Never: never render meter name tags. - Always: always render meter name tags. - In Focus Mode: render meter name tags only when in focus mode. - When Previewing: render meter name tags only when previewing a saved meter group. The range within which meter name tags are visible can be controlled with the *Meter Name Range* option. ## HUD When opening the meter controls for a meter in the Multimeter Screen, you can now use the up and down arrow keys to select the meter above or below the currently selected meter in the list. ## Fixes - On dedicated servers, the game was unable to save server-side options if the parent directory did not exist. This has been fixed.

# 1.15 ## Saved Meter Groups This feature allows you to save meter groups client side, which you can then load on any world at any time. Very handy if you need the same meter group across multiple game sessions! - There are 9 slots you can save a meter group to. - Holding the *Save Meter Group* key and pressing one of the number keys, your current meter group will be saved to that slot. - If you are currently not subscribed to any meter group, it will clear that slot. - Holding the *Load Meter Group* key and pressing one of the number keys, the meter group saved to that slot will be loaded and you will be subscribed to that meter group. - If the meter group already exists, it will be replaced with the saved meter group. - If the slot is empty, you will unsubscribed from your current meter group. The saved meter groups are stored in NBT format at `.minecraft/config/redstone_multimeter/saved_meter_groups.nbt`. ### Preview - When the *Preview Meter Groups* option is enabled, holding the *Load Meter Group* key and pressing a number key will not immediately load the meter group from that slot, but preview that meter group. - The HUD will display that meter group, and its meters will be rendered in the world. - Pressing the same number key again will then load the meter group and subscribe you to it. - Letting go of the *Load Meter Group* key will stop previewing the meter group. ## Focus Mode *Focus mode* is a new feature that allows you to focus on individual events in the timeline. This makes it easier to follow the events within a given time frame. - When enabled, the HUD will be paused and a single event in the subtick overview will be highlighted. - The *Step Forward* and *Step Backward* keys can be used to step to the next or previous event in the timeline. - Hold `Ctrl` to skip forward an entire tick! - Details of the highlighted event will be displayed next to the subtick overview. - Only the meter corresponding to the highlighted event will be rendered in the world. ## Meter Name Tags This version adds options to enable meter name tags. These name tags render inside the meter highlight in the world. Meter name tags can be enabled with the *Render Meter Names* option, which has the following possible values: - Never: never render meter name tags. - Always: always render meter name tags. - In Focus Mode: render meter name tags only when in focus mode. - When Previewing: render meter name tags only when previewing a saved meter group. The range within which meter name tags are visible can be controlled with the *Meter Name Range* option. ## HUD When opening the meter controls for a meter in the Multimeter Screen, you can now use the up and down arrow keys to select the meter above or below the currently selected meter in the list. ## Fixes - On dedicated servers, the game was unable to save server-side options if the parent directory did not exist. This has been fixed.

# 1.15 ## Saved Meter Groups This feature allows you to save meter groups client side, which you can then load on any world at any time. Very handy if you need the same meter group across multiple game sessions! - There are 9 slots you can save a meter group to. - Holding the *Save Meter Group* key and pressing one of the number keys, your current meter group will be saved to that slot. - If you are currently not subscribed to any meter group, it will clear that slot. - Holding the *Load Meter Group* key and pressing one of the number keys, the meter group saved to that slot will be loaded and you will be subscribed to that meter group. - If the meter group already exists, it will be replaced with the saved meter group. - If the slot is empty, you will unsubscribed from your current meter group. The saved meter groups are stored in NBT format at `.minecraft/config/redstone_multimeter/saved_meter_groups.nbt`. ### Preview - When the *Preview Meter Groups* option is enabled, holding the *Load Meter Group* key and pressing a number key will not immediately load the meter group from that slot, but preview that meter group. - The HUD will display that meter group, and its meters will be rendered in the world. - Pressing the same number key again will then load the meter group and subscribe you to it. - Letting go of the *Load Meter Group* key will stop previewing the meter group. ## Focus Mode *Focus mode* is a new feature that allows you to focus on individual events in the timeline. This makes it easier to follow the events within a given time frame. - When enabled, the HUD will be paused and a single event in the subtick overview will be highlighted. - The *Step Forward* and *Step Backward* keys can be used to step to the next or previous event in the timeline. - Hold `Ctrl` to skip forward an entire tick! - Details of the highlighted event will be displayed next to the subtick overview. - Only the meter corresponding to the highlighted event will be rendered in the world. ## Meter Name Tags This version adds options to enable meter name tags. These name tags render inside the meter highlight in the world. Meter name tags can be enabled with the *Render Meter Names* option, which has the following possible values: - Never: never render meter name tags. - Always: always render meter name tags. - In Focus Mode: render meter name tags only when in focus mode. - When Previewing: render meter name tags only when previewing a saved meter group. The range within which meter name tags are visible can be controlled with the *Meter Name Range* option. ## HUD When opening the meter controls for a meter in the Multimeter Screen, you can now use the up and down arrow keys to select the meter above or below the currently selected meter in the list. ## Fixes - On dedicated servers, the game was unable to save server-side options if the parent directory did not exist. This has been fixed.

# 1.15 ## Saved Meter Groups This feature allows you to save meter groups client side, which you can then load on any world at any time. Very handy if you need the same meter group across multiple game sessions! - There are 9 slots you can save a meter group to. - Holding the *Save Meter Group* key and pressing one of the number keys, your current meter group will be saved to that slot. - If you are currently not subscribed to any meter group, it will clear that slot. - Holding the *Load Meter Group* key and pressing one of the number keys, the meter group saved to that slot will be loaded and you will be subscribed to that meter group. - If the meter group already exists, it will be replaced with the saved meter group. - If the slot is empty, you will unsubscribed from your current meter group. The saved meter groups are stored in NBT format at `.minecraft/config/redstone_multimeter/saved_meter_groups.nbt`. ### Preview - When the *Preview Meter Groups* option is enabled, holding the *Load Meter Group* key and pressing a number key will not immediately load the meter group from that slot, but preview that meter group. - The HUD will display that meter group, and its meters will be rendered in the world. - Pressing the same number key again will then load the meter group and subscribe you to it. - Letting go of the *Load Meter Group* key will stop previewing the meter group. ## Focus Mode *Focus mode* is a new feature that allows you to focus on individual events in the timeline. This makes it easier to follow the events within a given time frame. - When enabled, the HUD will be paused and a single event in the subtick overview will be highlighted. - The *Step Forward* and *Step Backward* keys can be used to step to the next or previous event in the timeline. - Hold `Ctrl` to skip forward an entire tick! - Details of the highlighted event will be displayed next to the subtick overview. - Only the meter corresponding to the highlighted event will be rendered in the world. ## Meter Name Tags This version adds options to enable meter name tags. These name tags render inside the meter highlight in the world. Meter name tags can be enabled with the *Render Meter Names* option, which has the following possible values: - Never: never render meter name tags. - Always: always render meter name tags. - In Focus Mode: render meter name tags only when in focus mode. - When Previewing: render meter name tags only when previewing a saved meter group. The range within which meter name tags are visible can be controlled with the *Meter Name Range* option. ## HUD When opening the meter controls for a meter in the Multimeter Screen, you can now use the up and down arrow keys to select the meter above or below the currently selected meter in the list. ## Fixes - On dedicated servers, the game was unable to save server-side options if the parent directory did not exist. This has been fixed.

# 1.15 ## Saved Meter Groups This feature allows you to save meter groups client side, which you can then load on any world at any time. Very handy if you need the same meter group across multiple game sessions! - There are 9 slots you can save a meter group to. - Holding the *Save Meter Group* key and pressing one of the number keys, your current meter group will be saved to that slot. - If you are currently not subscribed to any meter group, it will clear that slot. - Holding the *Load Meter Group* key and pressing one of the number keys, the meter group saved to that slot will be loaded and you will be subscribed to that meter group. - If the meter group already exists, it will be replaced with the saved meter group. - If the slot is empty, you will unsubscribed from your current meter group. The saved meter groups are stored in NBT format at `.minecraft/config/redstone_multimeter/saved_meter_groups.nbt`. ### Preview - When the *Preview Meter Groups* option is enabled, holding the *Load Meter Group* key and pressing a number key will not immediately load the meter group from that slot, but preview that meter group. - The HUD will display that meter group, and its meters will be rendered in the world. - Pressing the same number key again will then load the meter group and subscribe you to it. - Letting go of the *Load Meter Group* key will stop previewing the meter group. ## Focus Mode *Focus mode* is a new feature that allows you to focus on individual events in the timeline. This makes it easier to follow the events within a given time frame. - When enabled, the HUD will be paused and a single event in the subtick overview will be highlighted. - The *Step Forward* and *Step Backward* keys can be used to step to the next or previous event in the timeline. - Hold `Ctrl` to skip forward an entire tick! - Details of the highlighted event will be displayed next to the subtick overview. - Only the meter corresponding to the highlighted event will be rendered in the world. ## Meter Name Tags This version adds options to enable meter name tags. These name tags render inside the meter highlight in the world. Meter name tags can be enabled with the *Render Meter Names* option, which has the following possible values: - Never: never render meter name tags. - Always: always render meter name tags. - In Focus Mode: render meter name tags only when in focus mode. - When Previewing: render meter name tags only when previewing a saved meter group. The range within which meter name tags are visible can be controlled with the *Meter Name Range* option. ## HUD When opening the meter controls for a meter in the Multimeter Screen, you can now use the up and down arrow keys to select the meter above or below the currently selected meter in the list. ## Fixes - On dedicated servers, the game was unable to save server-side options if the parent directory did not exist. This has been fixed.

# 1.15 ## Saved Meter Groups This feature allows you to save meter groups client side, which you can then load on any world at any time. Very handy if you need the same meter group across multiple game sessions! - There are 9 slots you can save a meter group to. - Holding the *Save Meter Group* key and pressing one of the number keys, your current meter group will be saved to that slot. - If you are currently not subscribed to any meter group, it will clear that slot. - Holding the *Load Meter Group* key and pressing one of the number keys, the meter group saved to that slot will be loaded and you will be subscribed to that meter group. - If the meter group already exists, it will be replaced with the saved meter group. - If the slot is empty, you will unsubscribed from your current meter group. The saved meter groups are stored in NBT format at `.minecraft/config/redstone_multimeter/saved_meter_groups.nbt`. ### Preview - When the *Preview Meter Groups* option is enabled, holding the *Load Meter Group* key and pressing a number key will not immediately load the meter group from that slot, but preview that meter group. - The HUD will display that meter group, and its meters will be rendered in the world. - Pressing the same number key again will then load the meter group and subscribe you to it. - Letting go of the *Load Meter Group* key will stop previewing the meter group. ## Focus Mode *Focus mode* is a new feature that allows you to focus on individual events in the timeline. This makes it easier to follow the events within a given time frame. - When enabled, the HUD will be paused and a single event in the subtick overview will be highlighted. - The *Step Forward* and *Step Backward* keys can be used to step to the next or previous event in the timeline. - Hold `Ctrl` to skip forward an entire tick! - Details of the highlighted event will be displayed next to the subtick overview. - Only the meter corresponding to the highlighted event will be rendered in the world. ## Meter Name Tags This version adds options to enable meter name tags. These name tags render inside the meter highlight in the world. Meter name tags can be enabled with the *Render Meter Names* option, which has the following possible values: - Never: never render meter name tags. - Always: always render meter name tags. - In Focus Mode: render meter name tags only when in focus mode. - When Previewing: render meter name tags only when previewing a saved meter group. The range within which meter name tags are visible can be controlled with the *Meter Name Range* option. ## HUD When opening the meter controls for a meter in the Multimeter Screen, you can now use the up and down arrow keys to select the meter above or below the currently selected meter in the list. ## Fixes - On dedicated servers, the game was unable to save server-side options if the parent directory did not exist. This has been fixed.

# 1.15 ## Saved Meter Groups This feature allows you to save meter groups client side, which you can then load on any world at any time. Very handy if you need the same meter group across multiple game sessions! - There are 9 slots you can save a meter group to. - Holding the *Save Meter Group* key and pressing one of the number keys, your current meter group will be saved to that slot. - If you are currently not subscribed to any meter group, it will clear that slot. - Holding the *Load Meter Group* key and pressing one of the number keys, the meter group saved to that slot will be loaded and you will be subscribed to that meter group. - If the meter group already exists, it will be replaced with the saved meter group. - If the slot is empty, you will unsubscribed from your current meter group. The saved meter groups are stored in NBT format at `.minecraft/config/redstone_multimeter/saved_meter_groups.nbt`. ### Preview - When the *Preview Meter Groups* option is enabled, holding the *Load Meter Group* key and pressing a number key will not immediately load the meter group from that slot, but preview that meter group. - The HUD will display that meter group, and its meters will be rendered in the world. - Pressing the same number key again will then load the meter group and subscribe you to it. - Letting go of the *Load Meter Group* key will stop previewing the meter group. ## Focus Mode *Focus mode* is a new feature that allows you to focus on individual events in the timeline. This makes it easier to follow the events within a given time frame. - When enabled, the HUD will be paused and a single event in the subtick overview will be highlighted. - The *Step Forward* and *Step Backward* keys can be used to step to the next or previous event in the timeline. - Hold `Ctrl` to skip forward an entire tick! - Details of the highlighted event will be displayed next to the subtick overview. - Only the meter corresponding to the highlighted event will be rendered in the world. ## Meter Name Tags This version adds options to enable meter name tags. These name tags render inside the meter highlight in the world. Meter name tags can be enabled with the *Render Meter Names* option, which has the following possible values: - Never: never render meter name tags. - Always: always render meter name tags. - In Focus Mode: render meter name tags only when in focus mode. - When Previewing: render meter name tags only when previewing a saved meter group. The range within which meter name tags are visible can be controlled with the *Meter Name Range* option. ## HUD When opening the meter controls for a meter in the Multimeter Screen, you can now use the up and down arrow keys to select the meter above or below the currently selected meter in the list. ## Fixes - On dedicated servers, the game was unable to save server-side options if the parent directory did not exist. This has been fixed.

# 1.15 ## Saved Meter Groups This feature allows you to save meter groups client side, which you can then load on any world at any time. Very handy if you need the same meter group across multiple game sessions! - There are 9 slots you can save a meter group to. - Holding the *Save Meter Group* key and pressing one of the number keys, your current meter group will be saved to that slot. - If you are currently not subscribed to any meter group, it will clear that slot. - Holding the *Load Meter Group* key and pressing one of the number keys, the meter group saved to that slot will be loaded and you will be subscribed to that meter group. - If the meter group already exists, it will be replaced with the saved meter group. - If the slot is empty, you will unsubscribed from your current meter group. The saved meter groups are stored in NBT format at `.minecraft/config/redstone_multimeter/saved_meter_groups.nbt`. ### Preview - When the *Preview Meter Groups* option is enabled, holding the *Load Meter Group* key and pressing a number key will not immediately load the meter group from that slot, but preview that meter group. - The HUD will display that meter group, and its meters will be rendered in the world. - Pressing the same number key again will then load the meter group and subscribe you to it. - Letting go of the *Load Meter Group* key will stop previewing the meter group. ## Focus Mode *Focus mode* is a new feature that allows you to focus on individual events in the timeline. This makes it easier to follow the events within a given time frame. - When enabled, the HUD will be paused and a single event in the subtick overview will be highlighted. - The *Step Forward* and *Step Backward* keys can be used to step to the next or previous event in the timeline. - Hold `Ctrl` to skip forward an entire tick! - Details of the highlighted event will be displayed next to the subtick overview. - Only the meter corresponding to the highlighted event will be rendered in the world. ## Meter Name Tags This version adds options to enable meter name tags. These name tags render inside the meter highlight in the world. Meter name tags can be enabled with the *Render Meter Names* option, which has the following possible values: - Never: never render meter name tags. - Always: always render meter name tags. - In Focus Mode: render meter name tags only when in focus mode. - When Previewing: render meter name tags only when previewing a saved meter group. The range within which meter name tags are visible can be controlled with the *Meter Name Range* option. ## HUD When opening the meter controls for a meter in the Multimeter Screen, you can now use the up and down arrow keys to select the meter above or below the currently selected meter in the list. ## Fixes - On dedicated servers, the game was unable to save server-side options if the parent directory did not exist. This has been fixed.

# 1.15 ## Saved Meter Groups This feature allows you to save meter groups client side, which you can then load on any world at any time. Very handy if you need the same meter group across multiple game sessions! - There are 9 slots you can save a meter group to. - Holding the *Save Meter Group* key and pressing one of the number keys, your current meter group will be saved to that slot. - If you are currently not subscribed to any meter group, it will clear that slot. - Holding the *Load Meter Group* key and pressing one of the number keys, the meter group saved to that slot will be loaded and you will be subscribed to that meter group. - If the meter group already exists, it will be replaced with the saved meter group. - If the slot is empty, you will unsubscribed from your current meter group. The saved meter groups are stored in NBT format at `.minecraft/config/redstone_multimeter/saved_meter_groups.nbt`. ### Preview - When the *Preview Meter Groups* option is enabled, holding the *Load Meter Group* key and pressing a number key will not immediately load the meter group from that slot, but preview that meter group. - The HUD will display that meter group, and its meters will be rendered in the world. - Pressing the same number key again will then load the meter group and subscribe you to it. - Letting go of the *Load Meter Group* key will stop previewing the meter group. ## Focus Mode *Focus mode* is a new feature that allows you to focus on individual events in the timeline. This makes it easier to follow the events within a given time frame. - When enabled, the HUD will be paused and a single event in the subtick overview will be highlighted. - The *Step Forward* and *Step Backward* keys can be used to step to the next or previous event in the timeline. - Hold `Ctrl` to skip forward an entire tick! - Details of the highlighted event will be displayed next to the subtick overview. - Only the meter corresponding to the highlighted event will be rendered in the world. ## Meter Name Tags This version adds options to enable meter name tags. These name tags render inside the meter highlight in the world. Meter name tags can be enabled with the *Render Meter Names* option, which has the following possible values: - Never: never render meter name tags. - Always: always render meter name tags. - In Focus Mode: render meter name tags only when in focus mode. - When Previewing: render meter name tags only when previewing a saved meter group. The range within which meter name tags are visible can be controlled with the *Meter Name Range* option. ## HUD When opening the meter controls for a meter in the Multimeter Screen, you can now use the up and down arrow keys to select the meter above or below the currently selected meter in the list. ## Fixes - On dedicated servers, the game was unable to save server-side options if the parent directory did not exist. This has been fixed.

# 1.15 ## Saved Meter Groups This feature allows you to save meter groups client side, which you can then load on any world at any time. Very handy if you need the same meter group across multiple game sessions! - There are 9 slots you can save a meter group to. - Holding the *Save Meter Group* key and pressing one of the number keys, your current meter group will be saved to that slot. - If you are currently not subscribed to any meter group, it will clear that slot. - Holding the *Load Meter Group* key and pressing one of the number keys, the meter group saved to that slot will be loaded and you will be subscribed to that meter group. - If the meter group already exists, it will be replaced with the saved meter group. - If the slot is empty, you will unsubscribed from your current meter group. The saved meter groups are stored in NBT format at `.minecraft/config/redstone_multimeter/saved_meter_groups.nbt`. ### Preview - When the *Preview Meter Groups* option is enabled, holding the *Load Meter Group* key and pressing a number key will not immediately load the meter group from that slot, but preview that meter group. - The HUD will display that meter group, and its meters will be rendered in the world. - Pressing the same number key again will then load the meter group and subscribe you to it. - Letting go of the *Load Meter Group* key will stop previewing the meter group. ## Focus Mode *Focus mode* is a new feature that allows you to focus on individual events in the timeline. This makes it easier to follow the events within a given time frame. - When enabled, the HUD will be paused and a single event in the subtick overview will be highlighted. - The *Step Forward* and *Step Backward* keys can be used to step to the next or previous event in the timeline. - Hold `Ctrl` to skip forward an entire tick! - Details of the highlighted event will be displayed next to the subtick overview. - Only the meter corresponding to the highlighted event will be rendered in the world. ## Meter Name Tags This version adds options to enable meter name tags. These name tags render inside the meter highlight in the world. Meter name tags can be enabled with the *Render Meter Names* option, which has the following possible values: - Never: never render meter name tags. - Always: always render meter name tags. - In Focus Mode: render meter name tags only when in focus mode. - When Previewing: render meter name tags only when previewing a saved meter group. The range within which meter name tags are visible can be controlled with the *Meter Name Range* option. ## HUD When opening the meter controls for a meter in the Multimeter Screen, you can now use the up and down arrow keys to select the meter above or below the currently selected meter in the list. ## Fixes - On dedicated servers, the game was unable to save server-side options if the parent directory did not exist. This has been fixed.

# 1.15 ## Saved Meter Groups This feature allows you to save meter groups client side, which you can then load on any world at any time. Very handy if you need the same meter group across multiple game sessions! - There are 9 slots you can save a meter group to. - Holding the *Save Meter Group* key and pressing one of the number keys, your current meter group will be saved to that slot. - If you are currently not subscribed to any meter group, it will clear that slot. - Holding the *Load Meter Group* key and pressing one of the number keys, the meter group saved to that slot will be loaded and you will be subscribed to that meter group. - If the meter group already exists, it will be replaced with the saved meter group. - If the slot is empty, you will unsubscribed from your current meter group. The saved meter groups are stored in NBT format at `.minecraft/config/redstone_multimeter/saved_meter_groups.nbt`. ### Preview - When the *Preview Meter Groups* option is enabled, holding the *Load Meter Group* key and pressing a number key will not immediately load the meter group from that slot, but preview that meter group. - The HUD will display that meter group, and its meters will be rendered in the world. - Pressing the same number key again will then load the meter group and subscribe you to it. - Letting go of the *Load Meter Group* key will stop previewing the meter group. ## Focus Mode *Focus mode* is a new feature that allows you to focus on individual events in the timeline. This makes it easier to follow the events within a given time frame. - When enabled, the HUD will be paused and a single event in the subtick overview will be highlighted. - The *Step Forward* and *Step Backward* keys can be used to step to the next or previous event in the timeline. - Hold `Ctrl` to skip forward an entire tick! - Details of the highlighted event will be displayed next to the subtick overview. - Only the meter corresponding to the highlighted event will be rendered in the world. ## Meter Name Tags This version adds options to enable meter name tags. These name tags render inside the meter highlight in the world. Meter name tags can be enabled with the *Render Meter Names* option, which has the following possible values: - Never: never render meter name tags. - Always: always render meter name tags. - In Focus Mode: render meter name tags only when in focus mode. - When Previewing: render meter name tags only when previewing a saved meter group. The range within which meter name tags are visible can be controlled with the *Meter Name Range* option. ## HUD When opening the meter controls for a meter in the Multimeter Screen, you can now use the up and down arrow keys to select the meter above or below the currently selected meter in the list. ## Fixes - On dedicated servers, the game was unable to save server-side options if the parent directory did not exist. This has been fixed.

# 1.15 ## Saved Meter Groups This feature allows you to save meter groups client side, which you can then load on any world at any time. Very handy if you need the same meter group across multiple game sessions! - There are 9 slots you can save a meter group to. - Holding the *Save Meter Group* key and pressing one of the number keys, your current meter group will be saved to that slot. - If you are currently not subscribed to any meter group, it will clear that slot. - Holding the *Load Meter Group* key and pressing one of the number keys, the meter group saved to that slot will be loaded and you will be subscribed to that meter group. - If the meter group already exists, it will be replaced with the saved meter group. - If the slot is empty, you will unsubscribed from your current meter group. The saved meter groups are stored in NBT format at `.minecraft/config/redstone_multimeter/saved_meter_groups.nbt`. ### Preview - When the *Preview Meter Groups* option is enabled, holding the *Load Meter Group* key and pressing a number key will not immediately load the meter group from that slot, but preview that meter group. - The HUD will display that meter group, and its meters will be rendered in the world. - Pressing the same number key again will then load the meter group and subscribe you to it. - Letting go of the *Load Meter Group* key will stop previewing the meter group. ## Focus Mode *Focus mode* is a new feature that allows you to focus on individual events in the timeline. This makes it easier to follow the events within a given time frame. - When enabled, the HUD will be paused and a single event in the subtick overview will be highlighted. - The *Step Forward* and *Step Backward* keys can be used to step to the next or previous event in the timeline. - Hold `Ctrl` to skip forward an entire tick! - Details of the highlighted event will be displayed next to the subtick overview. - Only the meter corresponding to the highlighted event will be rendered in the world. ## Meter Name Tags This version adds options to enable meter name tags. These name tags render inside the meter highlight in the world. Meter name tags can be enabled with the *Render Meter Names* option, which has the following possible values: - Never: never render meter name tags. - Always: always render meter name tags. - In Focus Mode: render meter name tags only when in focus mode. - When Previewing: render meter name tags only when previewing a saved meter group. The range within which meter name tags are visible can be controlled with the *Meter Name Range* option. ## HUD When opening the meter controls for a meter in the Multimeter Screen, you can now use the up and down arrow keys to select the meter above or below the currently selected meter in the list. ## Fixes - On dedicated servers, the game was unable to save server-side options if the parent directory did not exist. This has been fixed.

# 1.15 ## Saved Meter Groups This feature allows you to save meter groups client side, which you can then load on any world at any time. Very handy if you need the same meter group across multiple game sessions! - There are 9 slots you can save a meter group to. - Holding the *Save Meter Group* key and pressing one of the number keys, your current meter group will be saved to that slot. - If you are currently not subscribed to any meter group, it will clear that slot. - Holding the *Load Meter Group* key and pressing one of the number keys, the meter group saved to that slot will be loaded and you will be subscribed to that meter group. - If the meter group already exists, it will be replaced with the saved meter group. - If the slot is empty, you will unsubscribed from your current meter group. The saved meter groups are stored in NBT format at `.minecraft/config/redstone_multimeter/saved_meter_groups.nbt`. ### Preview - When the *Preview Meter Groups* option is enabled, holding the *Load Meter Group* key and pressing a number key will not immediately load the meter group from that slot, but preview that meter group. - The HUD will display that meter group, and its meters will be rendered in the world. - Pressing the same number key again will then load the meter group and subscribe you to it. - Letting go of the *Load Meter Group* key will stop previewing the meter group. ## Focus Mode *Focus mode* is a new feature that allows you to focus on individual events in the timeline. This makes it easier to follow the events within a given time frame. - When enabled, the HUD will be paused and a single event in the subtick overview will be highlighted. - The *Step Forward* and *Step Backward* keys can be used to step to the next or previous event in the timeline. - Hold `Ctrl` to skip forward an entire tick! - Details of the highlighted event will be displayed next to the subtick overview. - Only the meter corresponding to the highlighted event will be rendered in the world. ## Meter Name Tags This version adds options to enable meter name tags. These name tags render inside the meter highlight in the world. Meter name tags can be enabled with the *Render Meter Names* option, which has the following possible values: - Never: never render meter name tags. - Always: always render meter name tags. - In Focus Mode: render meter name tags only when in focus mode. - When Previewing: render meter name tags only when previewing a saved meter group. The range within which meter name tags are visible can be controlled with the *Meter Name Range* option. ## HUD When opening the meter controls for a meter in the Multimeter Screen, you can now use the up and down arrow keys to select the meter above or below the currently selected meter in the list. ## Fixes - On dedicated servers, the game was unable to save server-side options if the parent directory did not exist. This has been fixed.

# 1.15 ## Saved Meter Groups This feature allows you to save meter groups client side, which you can then load on any world at any time. Very handy if you need the same meter group across multiple game sessions! - There are 9 slots you can save a meter group to. - Holding the *Save Meter Group* key and pressing one of the number keys, your current meter group will be saved to that slot. - If you are currently not subscribed to any meter group, it will clear that slot. - Holding the *Load Meter Group* key and pressing one of the number keys, the meter group saved to that slot will be loaded and you will be subscribed to that meter group. - If the meter group already exists, it will be replaced with the saved meter group. - If the slot is empty, you will unsubscribed from your current meter group. The saved meter groups are stored in NBT format at `.minecraft/config/redstone_multimeter/saved_meter_groups.nbt`. ### Preview - When the *Preview Meter Groups* option is enabled, holding the *Load Meter Group* key and pressing a number key will not immediately load the meter group from that slot, but preview that meter group. - The HUD will display that meter group, and its meters will be rendered in the world. - Pressing the same number key again will then load the meter group and subscribe you to it. - Letting go of the *Load Meter Group* key will stop previewing the meter group. ## Focus Mode *Focus mode* is a new feature that allows you to focus on individual events in the timeline. This makes it easier to follow the events within a given time frame. - When enabled, the HUD will be paused and a single event in the subtick overview will be highlighted. - The *Step Forward* and *Step Backward* keys can be used to step to the next or previous event in the timeline. - Hold `Ctrl` to skip forward an entire tick! - Details of the highlighted event will be displayed next to the subtick overview. - Only the meter corresponding to the highlighted event will be rendered in the world. ## Meter Name Tags This version adds options to enable meter name tags. These name tags render inside the meter highlight in the world. Meter name tags can be enabled with the *Render Meter Names* option, which has the following possible values: - Never: never render meter name tags. - Always: always render meter name tags. - In Focus Mode: render meter name tags only when in focus mode. - When Previewing: render meter name tags only when previewing a saved meter group. The range within which meter name tags are visible can be controlled with the *Meter Name Range* option. ## HUD When opening the meter controls for a meter in the Multimeter Screen, you can now use the up and down arrow keys to select the meter above or below the currently selected meter in the list. ## Fixes - On dedicated servers, the game was unable to save server-side options if the parent directory did not exist. This has been fixed.

# 1.15 ## Saved Meter Groups This feature allows you to save meter groups client side, which you can then load on any world at any time. Very handy if you need the same meter group across multiple game sessions! - There are 9 slots you can save a meter group to. - Holding the *Save Meter Group* key and pressing one of the number keys, your current meter group will be saved to that slot. - If you are currently not subscribed to any meter group, it will clear that slot. - Holding the *Load Meter Group* key and pressing one of the number keys, the meter group saved to that slot will be loaded and you will be subscribed to that meter group. - If the meter group already exists, it will be replaced with the saved meter group. - If the slot is empty, you will unsubscribed from your current meter group. The saved meter groups are stored in NBT format at `.minecraft/config/redstone_multimeter/saved_meter_groups.nbt`. ### Preview - When the *Preview Meter Groups* option is enabled, holding the *Load Meter Group* key and pressing a number key will not immediately load the meter group from that slot, but preview that meter group. - The HUD will display that meter group, and its meters will be rendered in the world. - Pressing the same number key again will then load the meter group and subscribe you to it. - Letting go of the *Load Meter Group* key will stop previewing the meter group. ## Focus Mode *Focus mode* is a new feature that allows you to focus on individual events in the timeline. This makes it easier to follow the events within a given time frame. - When enabled, the HUD will be paused and a single event in the subtick overview will be highlighted. - The *Step Forward* and *Step Backward* keys can be used to step to the next or previous event in the timeline. - Hold `Ctrl` to skip forward an entire tick! - Details of the highlighted event will be displayed next to the subtick overview. - Only the meter corresponding to the highlighted event will be rendered in the world. ## Meter Name Tags This version adds options to enable meter name tags. These name tags render inside the meter highlight in the world. Meter name tags can be enabled with the *Render Meter Names* option, which has the following possible values: - Never: never render meter name tags. - Always: always render meter name tags. - In Focus Mode: render meter name tags only when in focus mode. - When Previewing: render meter name tags only when previewing a saved meter group. The range within which meter name tags are visible can be controlled with the *Meter Name Range* option. ## HUD When opening the meter controls for a meter in the Multimeter Screen, you can now use the up and down arrow keys to select the meter above or below the currently selected meter in the list. ## Fixes - On dedicated servers, the game was unable to save server-side options if the parent directory did not exist. This has been fixed.

# 1.15 ## Saved Meter Groups This feature allows you to save meter groups client side, which you can then load on any world at any time. Very handy if you need the same meter group across multiple game sessions! - There are 9 slots you can save a meter group to. - Holding the *Save Meter Group* key and pressing one of the number keys, your current meter group will be saved to that slot. - If you are currently not subscribed to any meter group, it will clear that slot. - Holding the *Load Meter Group* key and pressing one of the number keys, the meter group saved to that slot will be loaded and you will be subscribed to that meter group. - If the meter group already exists, it will be replaced with the saved meter group. - If the slot is empty, you will unsubscribed from your current meter group. The saved meter groups are stored in NBT format at `.minecraft/config/redstone_multimeter/saved_meter_groups.nbt`. ### Preview - When the *Preview Meter Groups* option is enabled, holding the *Load Meter Group* key and pressing a number key will not immediately load the meter group from that slot, but preview that meter group. - The HUD will display that meter group, and its meters will be rendered in the world. - Pressing the same number key again will then load the meter group and subscribe you to it. - Letting go of the *Load Meter Group* key will stop previewing the meter group. ## Focus Mode *Focus mode* is a new feature that allows you to focus on individual events in the timeline. This makes it easier to follow the events within a given time frame. - When enabled, the HUD will be paused and a single event in the subtick overview will be highlighted. - The *Step Forward* and *Step Backward* keys can be used to step to the next or previous event in the timeline. - Hold `Ctrl` to skip forward an entire tick! - Details of the highlighted event will be displayed next to the subtick overview. - Only the meter corresponding to the highlighted event will be rendered in the world. ## Meter Name Tags This version adds options to enable meter name tags. These name tags render inside the meter highlight in the world. Meter name tags can be enabled with the *Render Meter Names* option, which has the following possible values: - Never: never render meter name tags. - Always: always render meter name tags. - In Focus Mode: render meter name tags only when in focus mode. - When Previewing: render meter name tags only when previewing a saved meter group. The range within which meter name tags are visible can be controlled with the *Meter Name Range* option. ## HUD When opening the meter controls for a meter in the Multimeter Screen, you can now use the up and down arrow keys to select the meter above or below the currently selected meter in the list. ## Fixes - On dedicated servers, the game was unable to save server-side options if the parent directory did not exist. This has been fixed.

# 1.15 ## Saved Meter Groups This feature allows you to save meter groups client side, which you can then load on any world at any time. Very handy if you need the same meter group across multiple game sessions! - There are 9 slots you can save a meter group to. - Holding the *Save Meter Group* key and pressing one of the number keys, your current meter group will be saved to that slot. - If you are currently not subscribed to any meter group, it will clear that slot. - Holding the *Load Meter Group* key and pressing one of the number keys, the meter group saved to that slot will be loaded and you will be subscribed to that meter group. - If the meter group already exists, it will be replaced with the saved meter group. - If the slot is empty, you will unsubscribed from your current meter group. The saved meter groups are stored in NBT format at `.minecraft/config/redstone_multimeter/saved_meter_groups.nbt`. ### Preview - When the *Preview Meter Groups* option is enabled, holding the *Load Meter Group* key and pressing a number key will not immediately load the meter group from that slot, but preview that meter group. - The HUD will display that meter group, and its meters will be rendered in the world. - Pressing the same number key again will then load the meter group and subscribe you to it. - Letting go of the *Load Meter Group* key will stop previewing the meter group. ## Focus Mode *Focus mode* is a new feature that allows you to focus on individual events in the timeline. This makes it easier to follow the events within a given time frame. - When enabled, the HUD will be paused and a single event in the subtick overview will be highlighted. - The *Step Forward* and *Step Backward* keys can be used to step to the next or previous event in the timeline. - Hold `Ctrl` to skip forward an entire tick! - Details of the highlighted event will be displayed next to the subtick overview. - Only the meter corresponding to the highlighted event will be rendered in the world. ## Meter Name Tags This version adds options to enable meter name tags. These name tags render inside the meter highlight in the world. Meter name tags can be enabled with the *Render Meter Names* option, which has the following possible values: - Never: never render meter name tags. - Always: always render meter name tags. - In Focus Mode: render meter name tags only when in focus mode. - When Previewing: render meter name tags only when previewing a saved meter group. The range within which meter name tags are visible can be controlled with the *Meter Name Range* option. ## HUD When opening the meter controls for a meter in the Multimeter Screen, you can now use the up and down arrow keys to select the meter above or below the currently selected meter in the list. ## Fixes - On dedicated servers, the game was unable to save server-side options if the parent directory did not exist. This has been fixed.

# 1.15 Beta 5 ## Saved Meter Groups - Improved handling of the keybinds. - When first pressing the Load Meter Group or Saved Meter Group key, an action bar pop-up now hints that you can press one of the number keys to load/save a meter group. ## HUD - You can now use the up and down arrow keys to move the selection in the meter list.

# 1.15 Beta 4 ## Saved Meter Groups - When previewing a saved meter group, its meters will render in the world instead of the meters of your current meter group. - The subtick overview and meter event details are now hidden when previewing a saved meter group. ## Focus Mode - Focus mode is now automatically disabled when you subscribe to a different meter group. - The focussed meter is now highlighted in the meter list. ## Meter Name Tags This Beta adds options to enable meter name tags. These name tags render inside the meter highlight in the world. Meter name tags can be enabled with the *Render Meter Names* option, which has the following possible values: - Never: never render meter name tags. - Always: always render meter name tags. - In Focus Mode: render meter name tags only when in focus mode. - When Previewing: render meter name tags only when previewing a saved meter group. The range within which meter name tags are visible can be controlled with the *Meter Name Range* option.

# 1.15 Beta 3 ## Saved Meter Groups There is now an option to preview saved meter groups before loading them. When enabled, holding the *Load Meter Group* key and pressing a slot key will set a preview in the HUD of the meter group in that slot. Pressing the slot key again will then load that meter group. Letting go of the *Load Meter Group* key will remove the preview without loading the meter group. ## Focus Mode Focus mode is a new feature that allows you to focus on individual events in the timeline. This makes it easier to follow the events within a given time frame. - When enabled, the HUD will be paused and a single event in the subtick overview will be highlighted. - The *Step Forward* and *Step Backward* keys can be used to step to the next or previous event in the timeline. - Hold *Ctrl* to skip forward an entire tick! - Details of the highlighted event will be displayed next to the subtick overview. - All meters will be hidden in the world except the one corresponding to the highlighted event.

# 1.15 Beta 2 fixes a crash on start-up

# 1.15 Beta 1 ## Additions This Beta introduces the *Saved Meter Groups* feature. This feature allows you to save meter groups client side, which you can then load on any world at any time. Very handy if you need the same meter group across multiple game sessions! - There are 9 slots you can save a meter group to. - Holding the *Save Meter Group* key and pressing one of the number keys, your current meter group will be saved to that slot. - If you are currently not subscribed to any meter group, it will clear that slot. - Holding the *Load Meter Group* key and pressing one of the number keys, the meter group saved to that slot will be loaded and you will be subscribed to that meter group. - If the meter group already exists, it will be replaced with the saved meter group. - If the slot is empty, you will unsubscribed from your current meter group. The saved meter groups are stored in NBT format at `.minecraft/config/redstone_multimeter/saved_meter_groups.nbt`. ## Fixes On dedicated servers, the game was unable to save server-side options if the parent directory did not exist. This has been fixed.

# 1.14.0 Updated to Minecraft 1.21 - thanksk to [emilyavi]([https://github.com/emilyavi](https://github.com/emilyavi)) for handling this update!

# 1.14.1 Fixes missing background texture in RSMM GUIs.

# 1.14.0 Updated from 1.20.4 to 1.20.5/1.20.6.

# 1.14.0 Port to Ornithe Fabric/Quilt for Minecraft 1.13.x

# 1.14.0 Port to Ornithe Fabric/Quilt for Minecraft 1.12.x

# 1.14.0 Port to Ornithe Fabric/Quilt for Minecraft 1.11.x

# 1.14.0 Port to Ornithe Fabric/Quilt for Minecraft 1.10.x

# 1.14.0 Port to Ornithe Fabric/Quilt for Minecraft 1.9.x

# 1.14.0 Port to Ornithe Fabric/Quilt for Minecraft 1.8.x

# 1.14.3 - Removed Carpet and Subtick compat. - `/tick` was added to Vanilla. - no Subtick release exists for 1.20.3/1.20.4.

# 1.14.2 - fixed compatibility with Fabric API's Networking module API.

# 1.14.1 - fix Subtick compatibility for real this time

# 1.14.1 - fix Subtick compatibility for real this time

# 1.14.1 - fix Subtick compatibility for real this time

# 1.14.1 - fix Subtick compatibility for real this time

# 1.14.1 - fix Subtick compatibility for real this time

# 1.14.1 - fix Subtick compatibility for real this time

# 1.14.0 ## Fixes - Compatibility issues the Carpet and Subtick mods have been fixed.

# 1.14.0 ## Fixes - Compatibility issues the Carpet and Subtick mods have been fixed.

# 1.14.0 ## Fixes - Compatibility issues the Carpet and Subtick mods have been fixed.

# 1.14.0 ## Fixes - Compatibility issues the Carpet and Subtick mods have been fixed.

# 1.14.0 ## Fixes - Compatibility issues the Carpet and Subtick mods have been fixed.

# 1.14.0 ## Fixes - Compatibility issues the Carpet and Subtick mods have been fixed.

# 1.14.0 ## Fixes - Compatibility issues the Carpet and Subtick mods have been fixed.

# 1.14.0 ## Fixes - Compatibility issues the Carpet and Subtick mods have been fixed.

# 1.14.0 ## Fixes - Compatibility issues the Carpet and Subtick mods have been fixed.

# 1.14.0 ## Fixes - Compatibility issues the Carpet and Subtick mods have been fixed.

# 1.14.0 ## Fixes - Compatibility issues the Carpet and Subtick mods have been fixed.

# 1.14.0 ## Fixes - Compatibility issues the Carpet and Subtick mods have been fixed.

# 1.13.1 for Minecraft 1.20.2-1.20.4 ## Fixes - Text in tutorial toasts renders incorrectly. - The background in tutorial toasts does not render.

# 1.13.1 ## Fixes - Text in tutorial toasts renders incorrectly.

# 1.13.1 ## Fixes - Compatibility issues with Carpet mod have been fixed.

# 1.13.0 ## Fixes - Compatibility issues with the [Alternate Current mod](https://modrinth.com/mod/alternate-current) that were introduced in v1.12 have been fixed.

# 1.13.0 ## Fixes - Compatibility issues with the [Alternate Current mod](https://modrinth.com/mod/alternate-current) that were introduced in v1.12 have been fixed.

# 1.13.0 ## Fixes - Compatibility issues with the [Alternate Current mod](https://modrinth.com/mod/alternate-current) that were introduced in v1.12 have been fixed.

# 1.13.0 ## Fixes - Compatibility issues with the [Alternate Current mod](https://modrinth.com/mod/alternate-current) that were introduced in v1.12 have been fixed.

# 1.13.0 ## Fixes - Compatibility issues with the [Alternate Current mod](https://modrinth.com/mod/alternate-current) that were introduced in v1.12 have been fixed.

# 1.13.0 ## Fixes - Compatibility issues with the [Alternate Current mod](https://modrinth.com/mod/alternate-current) that were introduced in v1.12 have been fixed.

# 1.13.0 ## Fixes - Compatibility issues with the [Alternate Current mod](https://modrinth.com/mod/alternate-current) that were introduced in v1.12 have been fixed.

# 1.13.0 ## Fixes - Compatibility issues with the [Alternate Current mod](https://modrinth.com/mod/alternate-current) that were introduced in v1.12 have been fixed.

# 1.13.0 ## Fixes - Compatibility issues with the [Alternate Current mod](https://modrinth.com/mod/alternate-current) that were introduced in v1.12 have been fixed.

# 1.13.0 ## Fixes - Compatibility issues with the [Alternate Current mod](https://modrinth.com/mod/alternate-current) that were introduced in v1.12 have been fixed.

# 1.13.0 ## Fixes - Compatibility issues with the [Alternate Current mod](https://modrinth.com/mod/alternate-current) that were introduced in v1.12 have been fixed.

# 1.13.0 ## Fixes - Compatibility issues with the [Alternate Current mod](https://modrinth.com/mod/alternate-current) that were introduced in v1.12 have been fixed.

# 1.12.0 updated to support Minecraft 1.20 and 1.20.1

# 1.12.1 ## Changes - Update Amecs compatibility.

# 1.12.0 ## Changes - Big internal changes make v1.12 **incompatible** with v1.11 and below. ## Fixes - Compatibility issues with the [SubTick mod](https://modrinth.com/mod/subtick) have been fixed.

# 1.12.0 ## Changes - Big internal changes make v1.12 **incompatible** with v1.11 and below. ## Fixes - Compatibility issues with the [SubTick mod](https://modrinth.com/mod/subtick) have been fixed.

# 1.12.0 ## Changes - Big internal changes make v1.12 **incompatible** with v1.11 and below. ## Fixes - Compatibility issues with the [SubTick mod](https://modrinth.com/mod/subtick) have been fixed.

# 1.12.0 ## Changes - Big internal changes make v1.12 **incompatible** with v1.11 and below. ## Fixes - Compatibility issues with the [SubTick mod](https://modrinth.com/mod/subtick) have been fixed.

# 1.12.0 ## Changes - Big internal changes make v1.12 **incompatible** with v1.11 and below. ## Fixes - Compatibility issues with the [SubTick mod](https://modrinth.com/mod/subtick) have been fixed.

# 1.12.0 ## Changes - Big internal changes make v1.12 **incompatible** with v1.11 and below. ## Fixes - Compatibility issues with the [SubTick mod](https://modrinth.com/mod/subtick) have been fixed.

# 1.12.0 ## Changes - Big internal changes make v1.12 **incompatible** with v1.11 and below.

# 1.12.0 ## Changes - Big internal changes make v1.12 **incompatible** with v1.11 and below.

# 1.12.0 ## Changes - Big internal changes make v1.12 **incompatible** with v1.11 and below.

# 1.12.0 ## Changes - Big internal changes make v1.12 **incompatible** with v1.11 and below.

# 1.11.2 ## Fixes - Crash due to the bundled version of Amecs API being outdated.

# 1.11.0 Updated to Minecraft 1.19.4. ## Fixes - The 'join a meter group' tutorial step cannot be completed by joining a group you're already in. (#14)

# 1.11.2 ## Fixes - The 'join a meter group' tutorial step cannot be completed by joining a group you're already in. (#14)

# 1.11.1 ## Fixes - The 'join a meter group' tutorial step cannot be completed by joining a group you're already in. (#14)

# 1.11.1 ## Fixes - The 'join a meter group' tutorial step cannot be completed by joining a group you're already in. (#14)

# 1.11.1 ## Fixes - The 'join a meter group' tutorial step cannot be completed by joining a group you're already in. (#14)

# 1.11.1 ## Fixes - The 'join a meter group' tutorial step cannot be completed by joining a group you're already in. (#14)

# 1.11.1 ## Fixes - The 'join a meter group' tutorial step cannot be completed by joining a group you're already in. (#14)

# 1.11.1 ## Fixes - The 'join a meter group' tutorial step cannot be completed by joining a group you're already in. (#14)

# 1.11.1 ## Fixes - The 'join a meter group' tutorial step cannot be completed by joining a group you're already in. (#14)

# 1.11.1 ## Fixes - The 'join a meter group' tutorial step cannot be completed by joining a group you're already in. (#14)

# 1.11.1 ## Fixes - Crash due to the bundled Amecs API being outdated (#13).

# 1.11.0 ## Changes - The meter list can now be [re-ordered](https://gfycat.com/icyglossyappaloosa) by clicking on an entry and dragging it to the desired place in the list.

# 1.11.0 ## Changes - The meter list can now be [re-ordered](https://gfycat.com/icyglossyappaloosa) by clicking on an entry and dragging it to the desired place in the list.

# 1.11.0 ## Changes - The meter list can now be [re-ordered](https://gfycat.com/icyglossyappaloosa) by clicking on an entry and dragging it to the desired place in the list.

# 1.11.0 ## Changes - The meter list can now be [re-ordered](https://gfycat.com/icyglossyappaloosa) by clicking on an entry and dragging it to the desired place in the list.

# 1.11.0 ## Changes - The meter list can now be [re-ordered](https://gfycat.com/icyglossyappaloosa) by clicking on an entry and dragging it to the desired place in the list.

# 1.11.0 ## Changes - The meter list can now be [re-ordered](https://gfycat.com/icyglossyappaloosa) by clicking on an entry and dragging it to the desired place in the list.

# 1.11.0 ## Changes - The meter list can now be [re-ordered](https://gfycat.com/icyglossyappaloosa) by clicking on an entry and dragging it to the desired place in the list.

# 1.11.0 ## Changes - The meter list can now be [re-ordered](https://gfycat.com/icyglossyappaloosa) by clicking on an entry and dragging it to the desired place in the list.

# 1.11.0 ## Changes - The meter list can now be [re-ordered](https://gfycat.com/icyglossyappaloosa) by clicking on an entry and dragging it to the desired place in the list.

# 1.10.0 ## Changes - For hoppers, the `active` event type now keeps track of whether the hopper is in cooldown. - New option `Color Picker` - sets the algorithm used to pick colors for new meters. ## Fixes - Some packets are sent to non-RSMM clients, resulting in packet spam to clients without the mod installed.

# 1.10.0 ## Changes - For hoppers, the `active` event type now keeps track of whether the hopper is in cooldown. - New option `Color Picker` - sets the algorithm used to pick colors for new meters. ## Fixes - Some packets are sent to non-RSMM clients, resulting in packet spam to clients without the mod installed.

# 1.10.0 ## Changes - For hoppers, the `active` event type now keeps track of whether the hopper is in cooldown. - New option `Color Picker` - sets the algorithm used to pick colors for new meters. ## Fixes - Some packets are sent to non-RSMM clients, resulting in packet spam to clients without the mod installed.

# 1.10.0 ## Changes - For hoppers, the `active` event type now keeps track of whether the hopper is in cooldown. - New option `Color Picker` - sets the algorithm used to pick colors for new meters. ## Fixes - Some packets are sent to non-RSMM clients, resulting in packet spam to clients without the mod installed.

# 1.10.0 ## Changes - For hoppers, the `active` event type now keeps track of whether the hopper is in cooldown. - New option `Color Picker` - sets the algorithm used to pick colors for new meters. ## Fixes - Some packets are sent to non-RSMM clients, resulting in packet spam to clients without the mod installed.

# 1.10.0 ## Changes - For hoppers, the `active` event type now keeps track of whether the hopper is in cooldown. - New option `Color Picker` - sets the algorithm used to pick colors for new meters. ## Fixes - Some packets are sent to non-RSMM clients, resulting in packet spam to clients without the mod installed.

# 1.10.0 ## Changes - For hoppers, the `active` event type now keeps track of whether the hopper is in cooldown. - New option `Color Picker` - sets the algorithm used to pick colors for new meters. ## Fixes - Some packets are sent to non-RSMM clients, resulting in packet spam to clients without the mod installed.

# 1.10.0 ## Changes - For hoppers, the `active` event type now keeps track of whether the hopper is in cooldown. - New option `Color Picker` - sets the algorithm used to pick colors for new meters. ## Fixes - Some packets are sent to non-RSMM clients, resulting in packet spam to clients without the mod installed.

# 1.9.1 This update fixes a crash.

# 1.9.1 This update fixes a crash.

# 1.9.1 This update fixes a crash.

# 1.9.1 This update fixes a crash.

# 1.9.1 This update fixes a crash.

# 1.9.1 This update fixes a crash.

# 1.9.1 This update fixes a crash.

# 1.9.1 This update fixes a crash.

# 1.9.0 ## Changes - RSMM for 1.19 is now compatible with Multiconnect. - The RSMM tutorial for first-time users will now be skipped entirely if the user does not engage with it for more than 3 minutes (#10). - The RSMM tutorial steps have been re-ordered to avoid confusion. ## Fixes - Keybind info in GUI tooltips now correctly displays Amecs modifiers (#11).

# 1.9.0 ## Changes - The RSMM tutorial for first-time users will now be skipped entirely if the user does not engage with it for more than 3 minutes (#10). - The RSMM tutorial steps have been re-ordered to avoid confusion. ## Fixes - Keybind info in GUI tooltips now correctly displays Amecs modifiers (#11).

# 1.9.0 ## Changes - The RSMM tutorial for first-time users will now be skipped entirely if the user does not engage with it for more than 3 minutes (#10). - The RSMM tutorial steps have been re-ordered to avoid confusion. ## Fixes - Keybind info in GUI tooltips now correctly displays Amecs modifiers (#11).

# 1.9.0 ## Changes - The RSMM tutorial for first-time users will now be skipped entirely if the user does not engage with it for more than 3 minutes (#10). - The RSMM tutorial steps have been re-ordered to avoid confusion. ## Fixes - Keybind info in GUI tooltips now correctly displays Amecs modifiers (#11).

# 1.9.0 ## Changes - The RSMM tutorial for first-time users will now be skipped entirely if the user does not engage with it for more than 3 minutes (#10). - The RSMM tutorial steps have been re-ordered to avoid confusion. ## Fixes - Keybind info in GUI tooltips now correctly displays Amecs modifiers (#11).

# 1.9.0 ## Changes - The RSMM tutorial for first-time users will now be skipped entirely if the user does not engage with it for more than 3 minutes (#10). - The RSMM tutorial steps have been re-ordered to avoid confusion. ## Fixes - Keybind info in GUI tooltips now correctly displays Amecs modifiers (#11).

# 1.9.0 ## Changes - The RSMM tutorial for first-time users will now be skipped entirely if the user does not engage with it for more than 3 minutes (#10). - The RSMM tutorial steps have been re-ordered to avoid confusion. ## Fixes - Keybind info in GUI tooltips now correctly displays Amecs modifiers (#11).

# 1.9.0 ## Changes - The RSMM tutorial for first-time users will now be skipped entirely if the user does not engage with it for more than 3 minutes (#10). - The RSMM tutorial steps have been re-ordered to avoid confusion. ## Fixes - Keybind info in GUI tooltips now correctly displays Amecs modifiers (#11).

# 1.8.0 ## Changes - First-time users of the mod will be guided through basic controls with tutorial toasts. - RSMM GUIs will now show keybind information in tooltips. ## Fixes - Holding the Scroll HUD key does not disable GUI scrolling in the Multimeter Screen. - If the Create Group On Join setting is disabled, the `/metergroup` command will not be available.

# 1.8.0 ## Changes - First-time users of the mod will be guided through basic controls with tutorial toasts. - RSMM GUIs will now show keybind information in tooltips. ## Fixes - Holding the Scroll HUD key does not disable GUI scrolling in the Multimeter Screen. - If the Create Group On Join setting is disabled, the `/metergroup` command will not be available.

# 1.8.0 ## Changes - First-time users of the mod will be guided through basic controls with tutorial toasts. - RSMM GUIs will now show keybind information in tooltips. ## Fixes - Holding the Scroll HUD key does not disable GUI scrolling in the Multimeter Screen. - If the Create Group On Join setting is disabled, the `/metergroup` command will not be available.

# 1.8.0 ## Changes - First-time users of the mod will be guided through basic controls with tutorial toasts. - RSMM GUIs will now show keybind information in tooltips. ## Fixes - Holding the Scroll HUD key does not disable GUI scrolling in the Multimeter Screen. - If the Create Group On Join setting is disabled, the `/metergroup` command will not be available.

# 1.8.0 ## Changes - First-time users of the mod will be guided through basic controls with tutorial toasts. - RSMM GUIs will now show keybind information in tooltips. ## Fixes - Holding the Scroll HUD key does not disable GUI scrolling in the Multimeter Screen. - If the Create Group On Join setting is disabled, the `/metergroup` command will not be available.

# 1.8.0 ## Changes - First-time users of the mod will be guided through basic controls with tutorial toasts. - RSMM GUIs will now show keybind information in tooltips. ## Fixes - Holding the Scroll HUD key does not disable GUI scrolling in the Multimeter Screen. - If the Create Group On Join setting is disabled, the `/metergroup` command will not be available.

# 1.8.0 ## Changes - First-time users of the mod will be guided through basic controls with tutorial toasts. - RSMM GUIs will now show keybind information in tooltips. ## Fixes - Holding the Scroll HUD key does not disable GUI scrolling in the Multimeter Screen. - If the Create Group On Join setting is disabled, the `/metergroup` command will not be available.

# 1.8.0 ## Changes - First-time users of the mod will be guided through basic controls with tutorial toasts. - RSMM GUIs will now show keybind information in tooltips. ## Fixes - Holding the Scroll HUD key does not disable GUI scrolling in the Multimeter Screen. - If the Create Group On Join setting is disabled, the `/metergroup` command will not be available.

# 1.7.0 ## Changes - The `scheduled_tick` and `block_event` event types now keep track of when the event is being scheduled, in addition to when it is being performed. This is denoted in the event viewer with a vertical line. ## Fixes - Fixed compatibility issue with Alternate Current v1.4.0.

# 1.7.0 ## Changes - The `scheduled_tick` and `block_event` event types now keep track of when the event is being scheduled, in addition to when it is being performed. This is denoted in the event viewer with a vertical line. ## Fixes - Fixed compatibility issue with Alternate Current v1.4.0.

# 1.7.0 ## Changes - The `scheduled_tick` and `block_event` event types now keep track of when the event is being scheduled, in addition to when it is being performed. This is denoted in the event viewer with a vertical line. ## Fixes - Fixed compatibility issue with Alternate Current v1.4.0.

# 1.7.0 ## Changes - The `scheduled_tick` and `block_event` event types now keep track of when the event is being scheduled, in addition to when it is being performed. This is denoted in the event viewer with a vertical line. ## Fixes - Fixed compatibility issue with Alternate Current v1.4.0.

# 1.7.0 ## Changes - The `scheduled_tick` and `block_event` event types now keep track of when the event is being scheduled, in addition to when it is being performed. This is denoted in the event viewer with a vertical line. ## Fixes - Fixed compatibility issue with Alternate Current v1.4.0.

# 1.7.0 ## Changes - The `scheduled_tick` and `block_event` event types now keep track of when the event is being scheduled, in addition to when it is being performed. This is denoted in the event viewer with a vertical line. ## Fixes - Fixed compatibility issue with Alternate Current v1.4.0.

# 1.7.0 ## Changes - The `scheduled_tick` and `block_event` event types now keep track of when the event is being scheduled, in addition to when it is being performed. This is denoted in the event viewer with a vertical line. ## Fixes - Fixed compatibility issue with Alternate Current v1.4.0.

# 1.7.0 ## Changes - The `scheduled_tick` and `block_event` event types now keep track of when the event is being scheduled, in addition to when it is being performed. This is denoted in the event viewer with a vertical line. ## Fixes - Fixed compatibility issue with Alternate Current v1.4.0.

# 1.6.0 - Update to Minecraft 1.19. - Update Alternate Current compatibility to v1.3.

# 1.6.1 ## Changes - HUD related keybinds now no longer work if the HUD is not visible. ## Fixes - Incompatibility with World Edit. - Crash on dedicated servers.

# 1.6.1 ## Changes - HUD related keybinds now no longer work if the HUD is not visible. ## Fixes - Incompatibility with World Edit. - Crash on dedicated servers.

# 1.6.1 ## Changes - HUD related keybinds now no longer work if the HUD is not visible. ## Fixes - Incompatibility with World Edit. - Crash on dedicated servers.

# 1.6.1 ## Changes - HUD related keybinds now no longer work if the HUD is not visible. ## Fixes - Incompatibility with World Edit. - Crash on dedicated servers.

# 1.6.1 ## Changes - HUD related keybinds now no longer work if the HUD is not visible. ## Fixes - Incompatibility with World Edit. - Crash on dedicated servers.

# 1.6.1 ## Changes - HUD related keybinds now no longer work if the HUD is not visible. ## Fixes - Incompatibility with World Edit. - Crash on dedicated servers.

# 1.6.1 ## Changes - HUD related keybinds now no longer work if the HUD is not visible. ## Fixes - Incompatibility with World Edit. - Crash on dedicated servers.

# 1.6.0 ## Changes - Added block event depth information (colloquially known as "BED" or "microtick") to the `block_event` event type. - New `Toggle Tick Marker` hotkey (default `Y`): this hotkey adds/removes a marker at the currently selected tick in the HUD (as a red highlight around that column). At the bottom of the HUD a counter displays the number of ticks between the currently selected tick and the marked tick. ## Fixes - Scrolling in RSMM UIs sometimes doesn't work until you move the mouse.

# 1.6.0 ## Changes - Added block event depth information (colloquially known as "BED" or "microtick") to the `block_event` event type. - New `Toggle Tick Marker` hotkey (default `Y`): this hotkey adds/removes a marker at the currently selected tick in the HUD (as a red highlight around that column). At the bottom of the HUD a counter displays the number of ticks between the currently selected tick and the marked tick. ## Fixes - Scrolling in RSMM UIs sometimes doesn't work until you move the mouse.

# 1.6.0 ## Changes - Added block event depth information (colloquially known as "BED" or "microtick") to the `block_event` event type. - New `Toggle Tick Marker` hotkey (default `Y`): this hotkey adds/removes a marker at the currently selected tick in the HUD (as a red highlight around that column). At the bottom of the HUD a counter displays the number of ticks between the currently selected tick and the marked tick. ## Fixes - Scrolling in RSMM UIs sometimes doesn't work until you move the mouse.

# 1.6.0 ## Changes - Added block event depth information (colloquially known as "BED" or "microtick") to the `block_event` event type. - New `Toggle Tick Marker` hotkey (default `Y`): this hotkey adds/removes a marker at the currently selected tick in the HUD (as a red highlight around that column). At the bottom of the HUD a counter displays the number of ticks between the currently selected tick and the marked tick. ## Fixes - Scrolling in RSMM UIs sometimes doesn't work until you move the mouse.

# 1.6.0 ## Changes - Added block event depth information (colloquially known as "BED" or "microtick") to the `block_event` event type. - New `Toggle Tick Marker` hotkey (default `Y`): this hotkey adds/removes a marker at the currently selected tick in the HUD (as a red highlight around that column). At the bottom of the HUD a counter displays the number of ticks between the currently selected tick and the marked tick. ## Fixes - Scrolling in RSMM UIs sometimes doesn't work until you move the mouse.

# 1.6.0 ## Changes - Added block event depth information (colloquially known as "BED" or "microtick") to the `block_event` event type. - New `Toggle Tick Marker` hotkey (default `Y`): this hotkey adds/removes a marker at the currently selected tick in the HUD (as a red highlight around that column). At the bottom of the HUD a counter displays the number of ticks between the currently selected tick and the marked tick. ## Fixes - Scrolling in RSMM UIs sometimes doesn't work until you move the mouse.

**Changes** - New Default Meter Properties screen where you can edit your default meter property overrides. It can be accessed from the Options Menu. - New Tick Phase Tree screen that shows the general execution order of the game logic on the server. It can be accessed through a hotkey (default `U`). - The column width and row height of the Multimeter HUD are now customizable through options in the Options Menu. - MultiConnect compatibility. **Fixes** - Entering an invalid dimension id into the “dimension” field in the meter controls crashes the game. - Meters moved by piston sometimes do not appear in the correct location. - The return command after teleporting to a meter fails if the coordinates exceed the thousands.

**Changes** - New Default Meter Properties screen where you can edit your default meter property overrides. It can be accessed from the Options Menu. - New Tick Phase Tree screen that shows the general execution order of the game logic on the server. It can be accessed through a hotkey (default `U`). - The column width and row height of the Multimeter HUD are now customizable through options in the Options Menu. - MultiConnect compatibility. **Fixes** - Entering an invalid dimension id into the “dimension” field in the meter controls crashes the game. - Meters moved by piston sometimes do not appear in the correct location. - The return command after teleporting to a meter fails if the coordinates exceed the thousands.

**Changes** - New Default Meter Properties screen where you can edit your default meter property overrides. It can be accessed from the Options Menu. - New Tick Phase Tree screen that shows the general execution order of the game logic on the server. It can be accessed through a hotkey (default `U`). - The column width and row height of the Multimeter HUD are now customizable through options in the Options Menu. - MultiConnect compatibility. **Fixes** - Entering an invalid dimension id into the “dimension” field in the meter controls crashes the game. - Meters moved by piston sometimes do not appear in the correct location. - The return command after teleporting to a meter fails if the coordinates exceed the thousands.

**Changes** - New Default Meter Properties screen where you can edit your default meter property overrides. It can be accessed from the Options Menu. - New Tick Phase Tree screen that shows the general execution order of the game logic on the server. It can be accessed through a hotkey (default `U`). - The column width and row height of the Multimeter HUD are now customizable through options in the Options Menu. - MultiConnect compatibility. **Fixes** - Entering an invalid dimension id into the “dimension” field in the meter controls crashes the game. - Meters moved by piston sometimes do not appear in the correct location. - The return command after teleporting to a meter fails if the coordinates exceed the thousands.

**Changes** - New Default Meter Properties screen where you can edit your default meter property overrides. It can be accessed from the Options Menu. - New Tick Phase Tree screen that shows the general execution order of the game logic on the server. It can be accessed through a hotkey (default `U`). - The column width and row height of the Multimeter HUD are now customizable through options in the Options Menu. - MultiConnect compatibility. **Fixes** - Entering an invalid dimension id into the “dimension” field in the meter controls crashes the game. - Meters moved by piston sometimes do not appear in the correct location. - The return command after teleporting to a meter fails if the coordinates exceed the thousands.

**Changes** - New Default Meter Properties screen where you can edit your default meter property overrides. It can be accessed from the Options Menu. - New Tick Phase Tree screen that shows the general execution order of the game logic on the server. It can be accessed through a hotkey (default `U`). - The column width and row height of the Multimeter HUD are now customizable through options in the Options Menu. - MultiConnect compatibility. **Fixes** - Entering an invalid dimension id into the “dimension” field in the meter controls crashes the game. - Meters moved by piston sometimes do not appear in the correct location. - The return command after teleporting to a meter fails if the coordinates exceed the thousands.

# 1.4.0 - New: client-side options - The Options Menu can be accessed with the hotkey (default `O`) or through Mod Menu. Check the wiki for a detailed description of all available options. - New: server-side options for dedicated servers - These options are stored in `/config/redstone_multimeter/options.json`. Check the wiki for a detailed description of all available options. - New "Print Logs To File" hotkey (default `P`): use this hotkey to dump all incoming logs into a file in `/.minecraft/redstone_multimeter/logs/`. - Meter groups can be made 'private'. In this mode only members of the meter group can subscribe to it. Only the owner of the meter group can add or remove members. - The `/meter` command has been replaced with the `/metergroup` command. Meter controls are now only available through the Multimeter Screen. - New "Default Meter Property Overrides". Use custom `.json` files in `/.minecraft/config/redstone_multimeter/meter/default_properties/` to control what properties new meters have when you place them. The properties you can control are: `name`, `color`, `movable` and `event_types`. - New event types: `block_update`, `comparator_update`, `shape_update`, `interact_block`. - New `Open Meter Controls` hotkey (default `I`): use this hotkey to open the meter controls for the meter you are looking at. - Carpet mod compatibility fix: the HUD now properly pauses when tick freeze is used.

# 1.4.0 - New: client-side options - The Options Menu can be accessed with the hotkey (default `O`) or through Mod Menu. Check the wiki for a detailed description of all available options. - New: server-side options for dedicated servers - These options are stored in `/config/redstone_multimeter/options.json`. Check the wiki for a detailed description of all available options. - New "Print Logs To File" hotkey (default `P`): use this hotkey to dump all incoming logs into a file in `/.minecraft/redstone_multimeter/logs/`. - Meter groups can be made 'private'. In this mode only members of the meter group can subscribe to it. Only the owner of the meter group can add or remove members. - The `/meter` command has been replaced with the `/metergroup` command. Meter controls are now only available through the Multimeter Screen. - New "Default Meter Property Overrides". Use custom `.json` files in `/.minecraft/config/redstone_multimeter/meter/default_properties/` to control what properties new meters have when you place them. The properties you can control are: `name`, `color`, `movable` and `event_types`. - New event types: `block_update`, `comparator_update`, `shape_update`, `interact_block`. - New `Open Meter Controls` hotkey (default `I`): use this hotkey to open the meter controls for the meter you are looking at. - Carpet mod compatibility fix: the HUD now properly pauses when tick freeze is used.

# 1.4.0 - New: client-side options - The Options Menu can be accessed with the hotkey (default `O`) or through Mod Menu. Check the wiki for a detailed description of all available options. - New: server-side options for dedicated servers - These options are stored in `/config/redstone_multimeter/options.json`. Check the wiki for a detailed description of all available options. - New "Print Logs To File" hotkey (default `P`): use this hotkey to dump all incoming logs into a file in `/.minecraft/redstone_multimeter/logs/`. - Meter groups can be made 'private'. In this mode only members of the meter group can subscribe to it. Only the owner of the meter group can add or remove members. - The `/meter` command has been replaced with the `/metergroup` command. Meter controls are now only available through the Multimeter Screen. - New "Default Meter Property Overrides". Use custom `.json` files in `/.minecraft/config/redstone_multimeter/meter/default_properties/` to control what properties new meters have when you place them. The properties you can control are: `name`, `color`, `movable` and `event_types`. - New event types: `block_update`, `comparator_update`, `shape_update`, `interact_block`. - New `Open Meter Controls` hotkey (default `I`): use this hotkey to open the meter controls for the meter you are looking at. - Carpet mod compatibility fix: the HUD now properly pauses when tick freeze is used.

# 1.4.0 - New: client-side options - The Options Menu can be accessed with the hotkey (default `O`) or through Mod Menu. Check the wiki for a detailed description of all available options. - New: server-side options for dedicated servers - These options are stored in `/config/redstone_multimeter/options.json`. Check the wiki for a detailed description of all available options. - New "Print Logs To File" hotkey (default `P`): use this hotkey to dump all incoming logs into a file in `/.minecraft/redstone_multimeter/logs/`. - Meter groups can be made 'private'. In this mode only members of the meter group can subscribe to it. Only the owner of the meter group can add or remove members. - The `/meter` command has been replaced with the `/metergroup` command. Meter controls are now only available through the Multimeter Screen. - New "Default Meter Property Overrides". Use custom `.json` files in `/.minecraft/config/redstone_multimeter/meter/default_properties/` to control what properties new meters have when you place them. The properties you can control are: `name`, `color`, `movable` and `event_types`. - New event types: `block_update`, `comparator_update`, `shape_update`, `interact_block`. - New `Open Meter Controls` hotkey (default `I`): use this hotkey to open the meter controls for the meter you are looking at. - Carpet mod compatibility fix: the HUD now properly pauses when tick freeze is used.

# 1.4.0 - New: client-side options - The Options Menu can be accessed with the hotkey (default `O`) or through Mod Menu. Check the wiki for a detailed description of all available options. - New: server-side options for dedicated servers - These options are stored in `/config/redstone_multimeter/options.json`. Check the wiki for a detailed description of all available options. - New "Print Logs To File" hotkey (default `P`): use this hotkey to dump all incoming logs into a file in `/.minecraft/redstone_multimeter/logs/`. - Meter groups can be made 'private'. In this mode only members of the meter group can subscribe to it. Only the owner of the meter group can add or remove members. - The `/meter` command has been replaced with the `/metergroup` command. Meter controls are now only available through the Multimeter Screen. - New "Default Meter Property Overrides". Use custom `.json` files in `/.minecraft/config/redstone_multimeter/meter/default_properties/` to control what properties new meters have when you place them. The properties you can control are: `name`, `color`, `movable` and `event_types`. - New event types: `block_update`, `comparator_update`, `shape_update`, `interact_block`. - New `Open Meter Controls` hotkey (default `I`): use this hotkey to open the meter controls for the meter you are looking at. - Carpet mod compatibility fix: the HUD now properly pauses when tick freeze is used.

## Changes in 1.3.0 [1.14/1.15/1.16/1.17] - Added support for Minecraft 1.17 (e.g. lightning rods, sculk sensors). - Added the following event types: `power_change`, `random_tick`, `scheduled_tick`, `block_event`, `entity_tick`, `block_entity_tick`. - Auto-generated meter names now reflect the block the meter is placed on. - Meter groups are now automatically removed if they have no subscibers and no meters. - You can teleport to a meter by clicking on the word Pos in the meter controls. - Added option to hide a meter in the HUD by clicking the square icon in the meter controls. ### Fixes - #3 scrolling timeline is unresponsive - Moved event indicators render on top of the pulse length indicators.

## Changes in 1.3.0 [1.14/1.15/1.16/1.17] - Added support for Minecraft 1.17 (e.g. lightning rods, sculk sensors). - Added the following event types: `power_change`, `random_tick`, `scheduled_tick`, `block_event`, `entity_tick`, `block_entity_tick`. - Auto-generated meter names now reflect the block the meter is placed on. - Meter groups are now automatically removed if they have no subscibers and no meters. - You can teleport to a meter by clicking on the word Pos in the meter controls. - Added option to hide a meter in the HUD by clicking the square icon in the meter controls. ### Fixes - #3 scrolling timeline is unresponsive - Moved event indicators render on top of the pulse length indicators.

## Changes in 1.3.0 [1.14/1.15/1.16/1.17] - Added support for Minecraft 1.17 (e.g. lightning rods, sculk sensors). - Added the following event types: `power_change`, `random_tick`, `scheduled_tick`, `block_event`, `entity_tick`, `block_entity_tick`. - Auto-generated meter names now reflect the block the meter is placed on. - Meter groups are now automatically removed if they have no subscibers and no meters. - You can teleport to a meter by clicking on the word Pos in the meter controls. - Added option to hide a meter in the HUD by clicking the square icon in the meter controls. ### Fixes - #3 scrolling timeline is unresponsive - Moved event indicators render on top of the pulse length indicators.

## Changes in 1.3.0 [1.14/1.15/1.16/1.17] - Added support for Minecraft 1.17 (e.g. lightning rods, sculk sensors). - Added the following event types: `power_change`, `random_tick`, `scheduled_tick`, `block_event`, `entity_tick`, `block_entity_tick`. - Auto-generated meter names now reflect the block the meter is placed on. - Meter groups are now automatically removed if they have no subscibers and no meters. - You can teleport to a meter by clicking on the word Pos in the meter controls. - Added option to hide a meter in the HUD by clicking the square icon in the meter controls. ### Fixes - #3 scrolling timeline is unresponsive - Moved event indicators render on top of the pulse length indicators.

## Changes in 1.2.1 - Fixed initial `powered` state of a meter being wrong if the meter is powered by a comparator.

## Changes - Added the Multimeter screen (open with `G` by default). On the Multimeter screen you can navigate the HUD with the mouse or select a meter to change its properties (position, name, movability, metered events). - Hover over an event in the subticks overview to see a tooltip with information about the event. - Meters can now track `active` events for detector rails, doors, end portal frames, fence gates, note blocks, powered and activator rails, trapdoors, tripwires. - Added the `/meter add <pos> <movable> <name> <color>` command - The `/meter color <color>` and `/meter name <name>` shortcuts have been removed, and instead autocomplete suggestions have been added to the `/meter color <index> <color>` and `/meter name <index> <name>` commands. - Removed the `/meter removeAll` command and instead added the `/meter remove all` subcommand. - Improvements to networking should make it more likely that future versions are backwards compatible with 1.2.

## Changes - Added the Multimeter screen (open with `G` by default). On the Multimeter screen you can navigate the HUD with the mouse or select a meter to change its properties (position, name, movability, metered events). - Hover over an event in the subticks overview to see a tooltip with information about the event. - Meters can now track `active` events for detector rails, doors, end portal frames, fence gates, note blocks, powered and activator rails, trapdoors, tripwires. - Added the `/meter add <pos> <movable> <name> <color>` command - The `/meter color <color>` and `/meter name <name>` shortcuts have been removed, and instead autocomplete suggestions have been added to the `/meter color <index> <color>` and `/meter name <index> <name>` commands. - Removed the `/meter removeAll` command and instead added the `/meter remove all` subcommand. - Improvements to networking should make it more likely that future versions are backwards compatible with 1.2.

## Changes - Added the Multimeter screen (open with `G` by default). On the Multimeter screen you can navigate the HUD with the mouse or select a meter to change its properties (position, name, movability, metered events). - Hover over an event in the subticks overview to see a tooltip with information about the event. - Meters can now track `active` events for detector rails, doors, end portal frames, fence gates, note blocks, powered and activator rails, trapdoors, tripwires. - Added the `/meter add <pos> <movable> <name> <color>` command - The `/meter color <color>` and `/meter name <name>` shortcuts have been removed, and instead autocomplete suggestions have been added to the `/meter color <index> <color>` and `/meter name <index> <name>` commands. - Removed the `/meter removeAll` command and instead added the `/meter remove all` subcommand. - Improvements to networking should make it more likely that future versions are backwards compatible with 1.2.

## Changes - Fixed event types that aren't displayed in the HUD still being logged, leading to extra empty columns in the subticks overview. - Fixed `powered` or `active` events not being displayed correctly in the ticks overview in rare cases where there are multiple in a single tick. - Fixed keybindings not being loaded.

## Changes - Fixed event types that aren't displayed in the HUD still being logged, leading to extra empty columns in the subticks overview. - Fixed `powered` or `active` events not being displayed correctly in the ticks overview in rare cases where there are multiple in a single tick. - Fixed keybindings not being loaded.

## Changes - Fixed event types that aren't displayed in the HUD still being logged, leading to extra empty columns in the subticks overview. - Fixed `powered` or `active` events not being displayed correctly in the ticks overview in rare cases where there are multiple in a single tick. - Fixed keybindings not being loaded.

# Features Redstone Multimeter allows you to track when blocks are powered, activated, or moved by placing virtual "meters" in the world. These meters log the various events. An overview of the logs of the past 60 ticks is displayed in a HUD in the top left of the screen. Each meter has its own row, and each column represents a single tick. Pressing `n` will pause this HUD and allow you to scroll through the logs with `,` and `.`. When the HUD is paused there will also be an extra overview on the right that displays the ordering of events within a single tick. Pressing `m` on your keyboard will add or remove a meter at the block you are looking at. By default meters will move if the block they are metering is moved by a piston. This is useful for debugging flying machines. If you hold `ctrl` while creating a meter that meter will be immovable. Meters are organized into meter groups. A meter group is a collection of meters and a unique name. You can have multiple meter groups, but the HUD will only display the logs of a single meter group. To subscribe to a meter group, use the `/meter group <name>` command. You can get a list of all meter groups by using the `/meter listGroups` command. ## Commands - `/meter name <index> <name>`: re-names the meter at the given index\*. - `/meter name <name>` will attempt to re-name the meter you are looking at, or default to an alias of `/meter name -1 <name>`. - `/meter name <index> <#RRGGBB>`: re-colors the meter at the given index\*. - `/meter color <#RRGGBB>` will attempt to re-color the meter you are looking at, or default to an alias of `/meter color -1 <#RRGGBB>`. - `/meter event <index>`: list the types of event that the meter at the given index\* is currently metering. - `/meter event` will attempt to list the types of event that the meter you are looking at is currently metering, or default to an alias of `/meter event -1`. - `/meter event [start/stop] <index> <type>`: make the meter at the given index\* start/stop metering the given event type. - `/meter event [start/stop] <type>` will attempt to update the metered event types of the meter you are looking at, or default to an alias of `/meter event [start/stop] -1 <type>`. - The available event types are: - `powered`: track if the block is receiving power. - `active`: track if the block is emitting power or active in another way. - `moved`: track if the block is moved by a piston. - `/meter removeAll`: removes all the meters in the meter group you are subscribed to. - `/meter group <name>`: subscribes you to the group with. the given name, or creates a new group if it does not yet exist. - `/meter listGroups`: lists all the meter groups. \* Positive indices count from the top down. Negative indices count from the bottom up. ## Keybindings - `Toggle Meter` (default `m`): Adds or removes a meter at the block you are looking at. Holding `ctrl` makes the meter immovable. - `Pause Meters` (default `n`): Pauses HUD. - `Step Forward` (default `.` ): While paused, move the display 1 tick ahead in time. Holding `ctrl` moves 10 ticks. - `Step Backward` (default `,`): While paused, move the display 1 tick back in time. Holding `ctrl` moves 10 ticks. - `Toggle HUD` (default `h`): toggles the HUD.

# Features Redstone Multimeter allows you to track when blocks are powered, activated, or moved by placing virtual "meters" in the world. These meters log the various events. An overview of the logs of the past 60 ticks is displayed in a HUD in the top left of the screen. Each meter has its own row, and each column represents a single tick. Pressing `n` will pause this HUD and allow you to scroll through the logs with `,` and `.`. When the HUD is paused there will also be an extra overview on the right that displays the ordering of events within a single tick. Pressing `m` on your keyboard will add or remove a meter at the block you are looking at. By default meters will move if the block they are metering is moved by a piston. This is useful for debugging flying machines. If you hold `ctrl` while creating a meter that meter will be immovable. Meters are organized into meter groups. A meter group is a collection of meters and a unique name. You can have multiple meter groups, but the HUD will only display the logs of a single meter group. To subscribe to a meter group, use the `/meter group <name>` command. You can get a list of all meter groups by using the `/meter listGroups` command. ## Commands - `/meter name <index> <name>`: re-names the meter at the given index\*. - `/meter name <name>` will attempt to re-name the meter you are looking at, or default to an alias of `/meter name -1 <name>`. - `/meter name <index> <#RRGGBB>`: re-colors the meter at the given index\*. - `/meter color <#RRGGBB>` will attempt to re-color the meter you are looking at, or default to an alias of `/meter color -1 <#RRGGBB>`. - `/meter event <index>`: list the types of event that the meter at the given index\* is currently metering. - `/meter event` will attempt to list the types of event that the meter you are looking at is currently metering, or default to an alias of `/meter event -1`. - `/meter event [start/stop] <index> <type>`: make the meter at the given index\* start/stop metering the given event type. - `/meter event [start/stop] <type>` will attempt to update the metered event types of the meter you are looking at, or default to an alias of `/meter event [start/stop] -1 <type>`. - The available event types are: - `powered`: track if the block is receiving power. - `active`: track if the block is emitting power or active in another way. - `moved`: track if the block is moved by a piston. - `/meter removeAll`: removes all the meters in the meter group you are subscribed to. - `/meter group <name>`: subscribes you to the group with. the given name, or creates a new group if it does not yet exist. - `/meter listGroups`: lists all the meter groups. \* Positive indices count from the top down. Negative indices count from the bottom up. ## Keybindings - `Toggle Meter` (default `m`): Adds or removes a meter at the block you are looking at. Holding `ctrl` makes the meter immovable. - `Pause Meters` (default `n`): Pauses HUD. - `Step Forward` (default `.` ): While paused, move the display 1 tick ahead in time. Holding `ctrl` moves 10 ticks. - `Step Backward` (default `,`): While paused, move the display 1 tick back in time. Holding `ctrl` moves 10 ticks. - `Toggle HUD` (default `h`): toggles the HUD.

# Features Redstone Multimeter allows you to track when blocks are powered, activated, or moved by placing virtual "meters" in the world. These meters log the various events. An overview of the logs of the past 60 ticks is displayed in a HUD in the top left of the screen. Each meter has its own row, and each column represents a single tick. Pressing `n` will pause this HUD and allow you to scroll through the logs with `,` and `.`. When the HUD is paused there will also be an extra overview on the right that displays the ordering of events within a single tick. Pressing `m` on your keyboard will add or remove a meter at the block you are looking at. By default meters will move if the block they are metering is moved by a piston. This is useful for debugging flying machines. If you hold `ctrl` while creating a meter that meter will be immovable. Meters are organized into meter groups. A meter group is a collection of meters and a unique name. You can have multiple meter groups, but the HUD will only display the logs of a single meter group. To subscribe to a meter group, use the `/meter group <name>` command. You can get a list of all meter groups by using the `/meter listGroups` command. ## Commands - `/meter name <index> <name>`: re-names the meter at the given index\*. - `/meter name <name>` will attempt to re-name the meter you are looking at, or default to an alias of `/meter name -1 <name>`. - `/meter name <index> <#RRGGBB>`: re-colors the meter at the given index\*. - `/meter color <#RRGGBB>` will attempt to re-color the meter you are looking at, or default to an alias of `/meter color -1 <#RRGGBB>`. - `/meter event <index>`: list the types of event that the meter at the given index\* is currently metering. - `/meter event` will attempt to list the types of event that the meter you are looking at is currently metering, or default to an alias of `/meter event -1`. - `/meter event [start/stop] <index> <type>`: make the meter at the given index\* start/stop metering the given event type. - `/meter event [start/stop] <type>` will attempt to update the metered event types of the meter you are looking at, or default to an alias of `/meter event [start/stop] -1 <type>`. - The available event types are: - `powered`: track if the block is receiving power. - `active`: track if the block is emitting power or active in another way. - `moved`: track if the block is moved by a piston. - `/meter removeAll`: removes all the meters in the meter group you are subscribed to. - `/meter group <name>`: subscribes you to the group with. the given name, or creates a new group if it does not yet exist. - `/meter listGroups`: lists all the meter groups. \* Positive indices count from the top down. Negative indices count from the bottom up. ## Keybindings - `Toggle Meter` (default `m`): Adds or removes a meter at the block you are looking at. Holding `ctrl` makes the meter immovable. - `Pause Meters` (default `n`): Pauses HUD. - `Step Forward` (default `.` ): While paused, move the display 1 tick ahead in time. Holding `ctrl` moves 10 ticks. - `Step Backward` (default `,`): While paused, move the display 1 tick back in time. Holding `ctrl` moves 10 ticks. - `Toggle HUD` (default `h`): toggles the HUD.