ВЕРСИИ (32)

### 📄 Pipez Optimizer Update Changelog #### English **Bug Fixes** * **Fixed Custom Pipe Rate Display:** Fixed an issue where third-party pipe types (such as the Mana and Source pipes from Pipez: More Pipes) would show and transfer an unlimited rate (2,147,483,647) when equipped with the ATM, Vibranium, Unobtainium, or Stellar Alloy upgrades. These pipes now use their configured upgrade rates. The four vanilla Pipez pipes are unaffected. #### 中文 **Bug 修复** * **修复扩展管道速率错误：** 修复了第三方扩展管道（如 Pipez: More Pipes 的魔力、魔源管道）安装 ATM、振金、难得素、恒星合金升级时，速率被误判为无限（显示与传输均为 2,147,483,647）的问题。这些管道现在按各自配置的自定义升级速率工作；原版四种管道不受影响。

### 📄 Pipez Optimizer Update Changelog #### English **Changes** * **Custom Extraction Frequency Floor:** The custom extraction frequency can no longer be set faster than the pipe's native speed for the installed upgrade (for example, 15 ticks on a basic item pipe). Lower values are automatically raised to the native speed, and overly fast settings in older saves are corrected automatically when loaded. **Bug Fixes** * **Fixed the Frequency Adjustment Getting Stuck After Swapping Upgrades:** After changing the upgrade, the minus button could get stuck at the old minimum (for example, 20 ticks) and refuse to go lower until the GUI was reopened. The button now reads the correct minimum for the current upgrade every time you click it. **Configuration** * **New Restriction Toggle:** A new server config option `restrictFrequencyToNative` (default on) controls the frequency floor. When disabled, no restriction is applied and the frequency can be set as low as 1 tick, restoring the previous behavior. #### 中文 **改动** * **自定义抽取频率下限：** 自定义抽取频率不能再低于当前管道升级档位的原生速度了（例如基础物品管道为 15 tick）。低于下限的值会自动提升到原生速度，旧存档中过快的频率设置也会在载入时自动纠正。 **Bug 修复** * **修复换升级后频率无法继续下调：** 更换升级后，频率的 - 按钮可能卡在旧的下限（例如 20 tick）无法继续调低，直到重新打开界面才恢复。现在每次点击按钮都会按当前升级读取正确的下限。 **配置** * **新增限制开关：** 服务端配置文件新增 `restrictFrequencyToNative`（默认开启），用于控制频率下限。关闭后不做任何频率限制，最低可设为 1 tick，恢复旧版行为。

### 📄 Pipez Optimizer Update Changelog #### English **Changes** * **Custom Extraction Frequency Floor:** The custom extraction frequency can no longer be set faster than the pipe's native speed for the installed upgrade (for example, 15 ticks on a basic item pipe). Lower values are automatically raised to the native speed, and overly fast settings in older saves are corrected automatically when loaded. **Bug Fixes** * **Fixed the Frequency Adjustment Getting Stuck After Swapping Upgrades:** After changing the upgrade, the minus button could get stuck at the old minimum (for example, 20 ticks) and refuse to go lower until the GUI was reopened. The button now reads the correct minimum for the current upgrade every time you click it. **Configuration** * **New Restriction Toggle:** A new server config option `restrictFrequencyToNative` (default on) controls the frequency floor. When disabled, no restriction is applied and the frequency can be set as low as 1 tick, restoring the previous behavior. #### 中文 **改动** * **自定义抽取频率下限：** 自定义抽取频率不能再低于当前管道升级档位的原生速度了（例如基础物品管道为 15 tick）。低于下限的值会自动提升到原生速度，旧存档中过快的频率设置也会在载入时自动纠正。 **Bug 修复** * **修复换升级后频率无法继续下调：** 更换升级后，频率的 - 按钮可能卡在旧的下限（例如 20 tick）无法继续调低，直到重新打开界面才恢复。现在每次点击按钮都会按当前升级读取正确的下限。 **配置** * **新增限制开关：** 服务端配置文件新增 `restrictFrequencyToNative`（默认开启），用于控制频率下限。关闭后不做任何频率限制，最低可设为 1 tick，恢复旧版行为。

### 📄 Pipez Optimizer Update Changelog #### English **Changes** * **Custom Extraction Frequency Floor:** The custom extraction frequency can no longer be set faster than the pipe's native speed for the installed upgrade (for example, 15 ticks on a basic item pipe). Lower values are automatically raised to the native speed, and overly fast settings in older saves are corrected automatically when loaded. **Bug Fixes** * **Fixed the Frequency Adjustment Getting Stuck After Swapping Upgrades:** After changing the upgrade, the minus button could get stuck at the old minimum (for example, 20 ticks) and refuse to go lower until the GUI was reopened. The button now reads the correct minimum for the current upgrade every time you click it. **Configuration** * **New Restriction Toggle:** A new server config option `restrictFrequencyToNative` (default on) controls the frequency floor. When disabled, no restriction is applied and the frequency can be set as low as 1 tick, restoring the previous behavior. #### 中文 **改动** * **自定义抽取频率下限：** 自定义抽取频率不能再低于当前管道升级档位的原生速度了（例如基础物品管道为 15 tick）。低于下限的值会自动提升到原生速度，旧存档中过快的频率设置也会在载入时自动纠正。 **Bug 修复** * **修复换升级后频率无法继续下调：** 更换升级后，频率的 - 按钮可能卡在旧的下限（例如 20 tick）无法继续调低，直到重新打开界面才恢复。现在每次点击按钮都会按当前升级读取正确的下限。 **配置** * **新增限制开关：** 服务端配置文件新增 `restrictFrequencyToNative`（默认开启），用于控制频率下限。关闭后不做任何频率限制，最低可设为 1 tick，恢复旧版行为。

### 📄 Pipez Optimizer Update Changelog #### English **Bug Fixes** * **Fixed a Crash When a Linked Mod Adds a Pipe Without Custom Rate Text:** The game could crash in creative mode or when hovering over pipe upgrade items if a linked mod registered a pipe type whose rate line had no custom wording. Such pipes now show their standard rate text as before, and the game no longer crashes. #### 中文 **Bug 修复** * **修复联动模组新增无自定义速率文字的管道时的崩溃：** 当联动模组注册了不提供自定义速率文字的管道类型时，在创造模式或悬浮查看管道升级物品时游戏可能直接崩溃。现在这类管道会照常显示标准速率文本，游戏不再崩溃。

### 📄 Pipez Optimizer Update Changelog #### English **Bug Fixes** * **Fixed a Crash When a Linked Mod Adds a Pipe Without Custom Rate Text:** The game could crash in creative mode or when hovering over pipe upgrade items if a linked mod registered a pipe type whose rate line had no custom wording. Such pipes now show their standard rate text as before, and the game no longer crashes. #### 中文 **Bug 修复** * **修复联动模组新增无自定义速率文字的管道时的崩溃：** 当联动模组注册了不提供自定义速率文字的管道类型时，在创造模式或悬浮查看管道升级物品时游戏可能直接崩溃。现在这类管道会照常显示标准速率文本，游戏不再崩溃。

### 📄 Pipez Optimizer Update Changelog #### English **Bug Fixes** * **Fixed Config Inheritance Breaking with FastWorkbench:** Adjusted the config inheritance logic for pipe upgrade items in the crafting table. It now uses a more conservative approach, ensuring the inheritance is no longer disabled when the FastWorkbench mod is installed. #### 中文 **Bug 修复** * **修复配置继承失效：** 调整了管道升级物品在合成表中的配置继承逻辑，现在采用更保守的处理方式，确保不会受到 FastWorkbench 模组的影响而导致继承功能失效。

### 📄 Pipez Optimizer Update Changelog #### English **Bug Fixes** * **Fixed Config Inheritance Breaking with FastWorkbench:** Adjusted the config inheritance logic for pipe upgrade items in the crafting table. It now uses a more conservative approach, ensuring the inheritance is no longer disabled when the FastWorkbench mod is installed. #### 中文 **Bug 修复** * **修复配置继承失效：** 调整了管道升级物品在合成表中的配置继承逻辑，现在采用更保守的处理方式，确保不会受到 FastWorkbench 模组的影响而导致继承功能失效。

### 📄 Pipez Optimizer Update Changelog #### English **New Features & Improvements** * **Remember Your Last Selected Tab:** The pipe settings window now remembers the transfer type tab (Item, Fluid, Energy, Gas, etc.) you last selected for each pipe connection and reopens on that same tab the next time you open it, instead of always defaulting back to the Item tab. The selection is stored per connection face in the client config folder, so it still works after restarting the game. * **Toggleable Feature:** A new config option can disable the tab memory feature entirely. When disabled, the pipe settings window always opens on its default tab again. #### 中文 **新增与改进** * **记住上次选择的标签页：** 管道设置界面现在会记住每个管道连接面最后选择的传输类型标签页（物品、流体、能量、气体等），下次打开时自动停在该标签页，不再每次固定回到物品页。记忆数据按连接面保存在客户端配置文件目录中，重启游戏后依然生效。 * **可配置开关：** 配置文件新增选项，可彻底关闭标签页记忆功能。关闭后，管道设置界面将恢复为每次打开都停留在默认标签页。

### 📄 Pipez Optimizer Update Changelog #### English **New Features & Improvements** * **Remember Your Last Selected Tab:** The pipe settings window now remembers the transfer type tab (Item, Fluid, Energy, Gas, etc.) you last selected for each pipe connection and reopens on that same tab the next time you open it, instead of always defaulting back to the Item tab. The selection is stored per connection face in the client config folder, so it still works after restarting the game. * **Toggleable Feature:** A new config option can disable the tab memory feature entirely. When disabled, the pipe settings window always opens on its default tab again. **Bug Fixes** * **Fixed NBT Tag Filtering:** Fixed a bug (introduced in v1.0.10~v1.0.11) where a Pipez filter that combined an item tag with NBT metadata (e.g. fuzzy matching `{"productivebees:gene_group":{purity:100}}`) could never extract matching items, even when the NBT comparison succeeded. Matching now behaves exactly like vanilla Pipez (as in v1.0.9). #### 中文 **新增与改进** * **记住上次选择的标签页：** 管道设置界面现在会记住每个管道连接面最后选择的传输类型标签页（物品、流体、能量、气体等），下次打开时自动停在该标签页，不再每次固定回到物品页。记忆数据按连接面保存在客户端配置文件目录中，重启游戏后依然生效。 * **可配置开关：** 配置文件新增选项，可彻底关闭标签页记忆功能。关闭后，管道设置界面将恢复为每次打开都停留在默认标签页。 **Bug 修复** * **修复 NBT 标签过滤失效：** 修复了 v1.0.10~v1.0.11 引入的问题——当 Pipez 过滤器同时设置了物品标签与 NBT 元数据（如模糊匹配 `{"productivebees:gene_group":{purity:100}}` 时，即使 NBT 比对成功也无法提取对应物品。现在匹配行为与原版 Pipez 完全一致（同 v1.0.9）。

### 📄 Pipez Optimizer Update Changelog #### English **New Features & Improvements** * **Synced Recent Updates:** Brought over the latest improvements from the 1.21.1 version. *** #### 中文 **新增与改进** * **同步近期更新：** 同步了 1.21.1 版本的最新改进。

### 📄 Pipez Optimizer Update Changelog #### English **New Features & Improvements** * **Transfer Rates at a Glance:** Upgrade items now show the transfer rates of every pipe type directly in their tooltip by default, no longer requiring Shift. Numbers are shortened with common units (for example 4.1k or 1.05M) and show at most two decimal places. Holding Shift still displays the full, exact numbers. * **Smart Sleep Toggle Setting:** A new config option can hide the Smart Sleep switch from the pipe settings window. When disabled, the switch disappears completely and every connection runs with Smart Sleep enabled by default; the settings panel also folds into a single compact row instead of two. **Adjustments** * **Cleaner Settings Window:** If a pipe type's maximum sleep time is set to 0 (never sleep) in the config file, its Smart Sleep switch is no longer displayed in the settings window, since it would have no effect. *** #### 中文 **新增与改进** * **传输参数一目了然：** 升级物品的说明现在默认直接显示每种管道的传输参数，不再需要按住 Shift 查看。数值使用常见的缩写单位（例如 4.1k、1.05M），小数最多显示两位；按住 Shift 时仍会显示完整的精确数值。 * **智能休眠开关设置：** 配置文件新增选项，可隐藏管道设置界面中的智能休眠开关。关闭后，该开关将从界面中完全消失，所有连接面默认开启智能休眠；设置面板也会由两行收起为简洁的单行显示。 **调整** * **更整洁的设置界面：** 当某类管道在配置文件中的最大休眠时间被设为 0（永不休眠）时，其设置界面不再显示智能休眠开关，避免出现没有实际作用的按钮。

### 📄 Pipez Optimizer Update Changelog #### English **Update** * This release syncs the recent improvements from the 1.20.1 version: faster item and fluid filtering, reduced re-sorting work in large pipe networks, lower overall overhead, and the fix for "Random" distribution no longer getting stuck on the first rolled order. *** #### 中文 **更新** * 本次更新同步了近期 1.20.1 版本的改进内容：物品与流体过滤提速、大型管道网络减少重复排序、降低整体运行开销，以及修复"随机"分布固定停留在第一次结果的的问题。

### 📄 Pipez Optimizer Update Changelog #### English **Performance Improvements** * **Faster Item Filtering:** Pipes with item or fluid filters (especially "exact match" filters that compare an item's full data, such as enchantments or custom names) now decide whether a stack may pass much faster. Repeated checks against the same item are answered instantly. * **Less Re-ordering Work:** Pipes no longer re-sort their destination lists over and over when nothing has changed, which noticeably reduces overhead in large pipe networks. * **Lower Overall Overhead:** Several heavily used internal routines were rebuilt to avoid creating large amounts of temporary objects every tick. **Fixes** * **Random Distribution:** Pipes set to "Random" distribution now draw a fresh random order each time, instead of getting stuck on the very first order they rolled. * **Filter Editing:** Modifying a filter in the pipe settings window now takes effect immediately. Previously, the old check result could briefly stick around for the same item. *** #### 中文 **性能优化** * **物品过滤提速：** 配置了物品或流体过滤器（尤其是比较物品完整数据、如附魔或自定义名称的"精确匹配"过滤器）的管道，判断物品能否通过的速度大幅提升。对同一物品的重复检查现在可以立即得出结果。 * **减少重复排序：** 管道在目标没有变化时不再反复重新排列目标列表，大型管道网络的运行开销明显降低。 * **整体开销降低：** 重写了管道运行中若干使用最频繁的内部流程，减少了每刻大量临时对象的产生。 **修复** * **随机分布：** 设置为"随机"分布的管道现在每次都会重新抽取随机顺序，不再固定停留在第一次的结果上。 * **过滤器编辑：** 在管道设置界面中修改过滤器后立即生效，不再出现同一物品短暂沿用旧判断结果的情况。

### 📄 Pipez Optimizer Update Changelog #### English **Performance Improvements** * **Faster Item Filtering:** Pipes with item or fluid filters (especially "exact match" filters that compare an item's full data, such as enchantments or custom names) now decide whether a stack may pass much faster. Repeated checks against the same item are answered instantly. * **Less Re-ordering Work:** Pipes no longer re-sort their destination lists over and over when nothing has changed, which noticeably reduces overhead in large pipe networks. * **Lower Overall Overhead:** Several heavily used internal routines were rebuilt to avoid creating large amounts of temporary objects every tick. **Fixes** * **Random Distribution:** Pipes set to "Random" distribution now draw a fresh random order each time, instead of getting stuck on the very first order they rolled. * **Filter Editing:** Modifying a filter in the pipe settings window now takes effect immediately. Previously, the old check result could briefly stick around for the same item. **Compatibility** * **Invasive Optimizations:** Pipez Optimizer can now be installed together with Invasive Optimizations without errors, and all of its features keep working normally. *** #### 中文 **性能优化** * **物品过滤提速：** 配置了物品或流体过滤器（尤其是比较物品完整数据、如附魔或自定义名称的"精确匹配"过滤器）的管道，判断物品能否通过的速度大幅提升。对同一物品的重复检查现在可以立即得出结果。 * **减少重复排序：** 管道在目标没有变化时不再反复重新排列目标列表，大型管道网络的运行开销明显降低。 * **整体开销降低：** 重写了管道运行中若干使用最频繁的内部流程，减少了每刻大量临时对象的产生。 **修复** * **随机分布：** 设置为"随机"分布的管道现在每次都会重新抽取随机顺序，不再固定停留在第一次的结果上。 * **过滤器编辑：** 在管道设置界面中修改过滤器后立即生效，不再出现同一物品短暂沿用旧判断结果的情况。 **兼容性** * **Invasive Optimizations 兼容：** 现在可以与 Invasive Optimizations（侵入式优化）同时安装而不报错，本模组的全部功能均正常工作

### 📄 Pipez Optimizer Update Changelog #### English **New Features & Improvements** * **Smart Sleep Toggle:** Smart Sleep can now be turned off individually for a single pipe through the pipe's settings window. Disabling it is only recommended for production lines that need the pipe to run passively at a set extraction frequency. * **Configuration Kept on Upgrade:** When crafting a lower-tier pipe upgrade into a higher-tier one, the configuration stored on the lower-tier upgrade is now automatically kept on the new upgrade, so there is no need to set it up again. *** #### 中文 **新增与改进** * **智能休眠开关：** 现在可以在管道的设置界面中，单独关闭这一条管道的智能休眠。仅建议在需要管道以固定抽取频率被动工作的产线上关闭该功能。 * **升级保留配置：** 现在使用低级管道升级合成更高一级的管道升级时，低级升级上保存的配置信息会自动保留到新的高级升级中，无需重新设置。

### 📄 Pipez Optimizer Update Changelog #### English **Optimizations & Fixes** * **Sleep Option:** The maximum idle wait for each pipe type can now be set to 0 in the server config. When set to 0, that pipe type will no longer pause after a failed transfer, while custom extraction frequency still works as before. *** #### 中文 **优化与修复** * **休眠选项：** 各类型管道的最大空闲等待时间现在可在服务端配置中设为 0。设为 0 后，该类型管道在抽取失败时不再暂停等待，自定义抽取频率仍按原样生效。

### 📄 Pipez Optimizer Update Changelog #### English **Optimizations & Fixes** * **Sleep Option:** The maximum idle wait for each pipe type can now be set to 0 in the server config. When set to 0, that pipe type will no longer pause after a failed transfer, while custom extraction frequency still works as before. *** #### 中文 **优化与修复** * **休眠选项：** 各类型管道的最大空闲等待时间现在可在服务端配置中设为 0。设为 0 后，该类型管道在抽取失败时不再暂停等待，自定义抽取频率仍按原样生效。

### 📄 Pipez Optimizer Update Changelog #### English **Optimizations & Fixes** * **World Reload Reliability:** Improved how pipes restore extraction settings, upgrades, and custom extraction frequency after leaving and re-entering a world, so configured pipes remain more consistent across sessions. * **Setting Persistence:** Custom extraction frequency is now kept more carefully when saving the world, including cases where related options are later changed. * **Multiplayer Sync:** Extraction frequency and Transfer Correction settings are synchronized more reliably between the server and other players. * **Interface Stability:** The extraction frequency input in the pipe GUI is more tolerant of unusual input, reducing the chance of the screen failing to respond. *** #### 中文 **优化与修复** * **进出存档稳定性：** 改进了管道在退出并重新进入世界后，对抽取设置、升级以及自定义抽取频率的还原方式，使已配置的管道在再次进入时更加一致。 * **设置保存：** 自定义抽取频率在保存世界时会得到更稳妥的保留，包括之后调整相关选项时的情况。 * **联机同步：** 抽取频率与“传输修正”设置在服务器与其他玩家之间的同步更加可靠。 * **界面稳定性：** 管道提取界面中的频率输入对异常输入更为宽容，降低界面无法正常响应的可能。

### 📄 Pipez Optimizer 1.20.1 #### English This version brings the 1.20.1 edition in line with the recent 1.21.1 update. **New Features** * **Stellar Alloy Pipe Upgrade:** Added a new top-tier "Stellar Alloy Pipe Upgrade" for late-game transfer needs. Crafting this upgrade requires materials from the "Ender IO: Evolution" mod. If that mod is not installed, a fallback recipe using Nether Stars is provided automatically. **Adjustments** * **Upgrade Transfer Rates:** Increased the transfer rates of all custom upgrades so they better match late-game progression. For example, the Unobtainium Upgrade now transfers 1,048,576 items per tick, with fluid, energy, and gas rates increased in the same way. A new `_v2` config file will be generated on launch so these values take effect; the old config file will no longer be used. *** #### 中文 此版本已跟进近期 1.21.1 的更新进度。 **新特性** * **恒星合金管道升级：** 新增了顶级的“恒星合金管道升级”，用于满足后期的传输需求。该升级默认需要“末影接口：进化 (Ender IO: Evolution)”模组的材料进行合成。若未安装该模组，则会自动启用使用下界之星的备用配方。 **调整** * **管道升级数值：** 上调了所有自定义升级的传输速率，使其更符合后期游戏进度。例如，难得素升级的物品传输量现为 1,048,576 个/次，流体、能量与气体的传输量也进行了同比例上调。游戏启动时将自动生成新的 `_v2` 配置文件以应用这些数值，旧配置文件将不再生效。

*** ### 📄 Pipez Optimizer Update Changelog #### English **New Features** * **Stellar Alloy Pipe Upgrade:** Added a new top-tier "Stellar Alloy Pipe Upgrade" to meet extreme late-game transfer needs. This upgrade requires materials from the "Ender IO: Evolution" mod (a fallback recipe using Nether Stars is automatically provided if the mod is not installed). **Optimizations & Fixes** * **Smart Sleep Mechanism Overhaul:** * Smoothed out the sleep algorithm's growth curve. Pipes will no longer enter deep sleep too quickly during short supply interruptions, significantly reducing the perceived delay for players. * Upon any successful transfer, the pipe's sleep penalty is now instantly reset, allowing it to immediately resume its maximum transfer speed without a "warm-up" period. * Added independent configuration options for the maximum sleep duration of each pipe type. The default maximum sleep time for Energy Pipes has been drastically reduced to prevent machine power interruptions. * Optimized internal calculations to bypass unnecessary math operations when pipes reach their maximum sleep limit, further reducing server load. * **Upgrade Transfer Rates Adjusted:** Significantly increased the base transfer rates for all custom upgrades to better align with late-game progression. For example, the Unobtainium Upgrade's item transfer rate has been increased from 1,024 to 1,048,576 items/tick, with fluid, energy, and gas rates scaled up accordingly. *(Note: The mod will automatically generate a new `_v2` config file to apply these updated values).* * **Fluid Pipe Correction Fix:** Fixed an issue where the "Transfer Correction" feature for fluid pipes lacked a processing loop limit, which could potentially cause performance drops in certain edge cases. *** #### 中文 **新特性** * **恒星合金管道升级：** 新增了顶级的“恒星合金管道升级”，以满足极限的后期传输需求。该升级默认需要“末影接口：进化 (Ender IO: Evolution)”模组的材料进行合成（若未安装该模组，则会自动启用使用下界之星的备用配方）。 **优化与修复** * **智能休眠机制重构：** * 优化了休眠算法的增长曲线，使管道在面临短暂的断供时不会过快进入深度休眠，从而大幅减少了玩家视觉上的延迟感。 * 管道在成功执行一次传输后，会立刻重置休眠惩罚并恢复至最高传输速度，不再需要缓慢的“预热”过程。 * 新增了针对不同管道类型（物品、流体、能量、气体）的独立最大休眠时间配置项。其中，能量管道的默认最大休眠时间被大幅缩短，以防止机器在管道休眠期间出现断电停机的情况。 * 优化了底层的休眠计算逻辑，当休眠达到上限时将直接跳过无意义的数学运算，进一步降低服务器性能消耗。 * **管道升级数值调整：** 大幅上调了所有自定义升级的传输速率，使其更符合后期游戏进度。例如，难得素升级的物品传输量从 1,024 提升至 1,048,576 个/次，流体、能量与气体的传输量也进行了同比例的大幅跨度上调。*（注：游戏启动时将自动生成新的 `_v2` 配置文件以应用这些新数值，旧配置文件将不再生效）*。 * **流体管道修正修复：** 修复了流体管道在开启“传输修正”功能时，缺乏处理循环次数限制的问题，防止在极端情况下引发游戏卡顿。 ***

### 📄 Pipez Optimizer Update Changelog #### English **New Features** * **Transfer Correction Switch:** Added a "Transfer Correction" toggle in the extraction GUI. If transferring to certain modded containers is unusually slow, this can be manually enabled to force the theoretical maximum transfer rate. **Optimizations & Fixes** * **Transfer & Sleep Logic Overhaul:** Corrected the distribution and sleep logic to prevent pipes from stalling, deadlocking, or ignoring priority settings under certain conditions. * **Compatibility Fixes:** Fixed an issue where the Create mod's Hose Pulley could not be activated properly, and resolved abnormal transfer amount issues in certain situations. *** #### 中文 **新特性** * **传输修正开关：** 在管道提取界面新增了“传输修正”开关。当连接某些特定模组的容器导致传输极慢时，可手动开启此功能以强制恢复理论传输速率。 **优化与修复** * **传输与休眠逻辑重构：** 修正了管道的分配与休眠判定逻辑，解决了特定情况下管道停止工作、互相死锁或优先级失效的问题。 * **兼容性修复：** 修复了无法正常激活“机械动力 (Create)”软管滑轮的问题，并解决了部分情况下传输量异常的错误。

### 📄 Pipez Optimizer Update Changelog #### English **Optimizations & Fixes** * **Smart Sleep Logic:** Optimized the smart sleep mechanism to handle transfer states more efficiently when the destination container is full or the source is empty. * **Performance Improvements:** Adjusted the core framework to further reduce performance overhead while the custom frequency feature is enabled. * **Zero Overhead Mode:** Disabling the custom frequency feature in the configuration file now completely reverts to the original logic, ensuring no additional performance overhead is generated. *** #### 中文 **优化与修复** * **智能休眠逻辑：** 优化了智能休眠机制，在目标容器已满或源容器为空时能够更高效地处理传输状态。 * **性能提升：** 调整了核心框架，在开启自定义频率功能的情况下进一步减少了性能开销。 * **零额外开销：** 现在在配置文件中关闭自定义频率功能后，管道将完全回退到原版逻辑，确保不会产生任何额外的性能开销。

*** ### 📄 Pipez Optimizer Update Changelog #### 🇺🇸 English **✨ Bug Fixes** * **Custom Frequency Saving:** Fixed an issue where the custom extraction frequency settings for pipes were not being saved correctly. *** #### 🇨🇳 中文 **✨ 修复** * **自定义频率保存：** 修复了管道的自定义抽取频率设置无法正确保存的问题。

*** ### 📄 Pipez Optimizer Update Changelog #### 🇺🇸 English **✨ Improvements & Bug Fixes** * **Infinite Source Compatibility:** Fixed an issue where fluid and gas pipes failed to extract from virtual tanks or infinite sources (such as Create's Hose Pulley). Pipes can now correctly recognize and interact with these special containers. * **Transfer Logic Overhaul:** Completely reworked the core transfer sequence for all pipe types (Item, Fluid, Energy, Gas). This ensures strict adherence to safe transfer protocols, greatly improving overall stability and preventing potential resource anomalies when interacting with complex modded machines. *** #### 🇨🇳 中文 **✨ 优化与修复** * **无限源与虚拟槽兼容：** 修复了流体和气体管道无法从虚拟流体槽或无限源（例如机械动力的软管滑轮）中抽取内容物的问题。现在管道可以正确识别并与这类特殊容器进行交互。 * **传输逻辑重构：** 彻底重构了所有类型管道（物品、流体、能量、气体）的核心传输逻辑。严格规范了跨模组传输的安全生命周期，大幅提升了在复杂模组环境下的稳定性，彻底杜绝了潜在的资源传输异常问题。

*** ### 📄 Pipez Optimizer Update Changelog #### 🇺🇸 English **✨ Improvements & Bug Fixes** * **Infinite Source Compatibility:** Fixed an issue where fluid and gas pipes failed to extract from virtual tanks or infinite sources (such as Create's Hose Pulley). Pipes can now correctly recognize and interact with these special containers. * **Transfer Logic Overhaul:** Completely reworked the core transfer sequence for all pipe types (Item, Fluid, Energy, Gas). This ensures strict adherence to safe transfer protocols, greatly improving overall stability and preventing potential resource anomalies when interacting with complex modded machines. *** #### 🇨🇳 中文 **✨ 优化与修复** * **无限源与虚拟槽兼容：** 修复了流体和气体管道无法从虚拟流体槽或无限源（例如机械动力的软管滑轮）中抽取内容物的问题。现在管道可以正确识别并与这类特殊容器进行交互。 * **传输逻辑重构：** 彻底重构了所有类型管道（物品、流体、能量、气体）的核心传输逻辑。严格规范了跨模组传输的安全生命周期，大幅提升了在复杂模组环境下的稳定性，彻底杜绝了潜在的资源传输异常问题。

*** ### 📄 Pipez Optimizer Update Changelog #### 🇺🇸 English **✨ Improvements & Bug Fixes** * **Round Robin Distribution Fix:** Fixed an issue in Round Robin mode where pipes would stop transferring entirely if the extraction rate was lower than the number of connected machines. Resources are now correctly and evenly distributed to all connected inventories without causing the pipe to halt. * **Smart Sleep Adjustment:** Adjusted the pause duration when a destination machine is full. Previously, if the pipe's transfer amount was significantly larger than the destination's storage capacity, the pipe would pause for too long after filling it, causing noticeable transfer delays. The wait time has now been shortened and resets immediately upon a successful transfer, ensuring smooth and continuous operation. * **GUI Synchronization:** Fixed a data synchronization issue in the pipe interface. When inserting or removing a pipe upgrade, the custom extraction frequency will now instantly update to reflect the new upgrade's default speed, without requiring the player to close and reopen the menu. *** #### 🇨🇳 中文 **✨ 优化与修复** * **轮询模式修复：** 修复了轮询分配模式下的一个逻辑问题。此前当管道的单次抽取量小于连接的机器数量时，会导致末端机器无法分到资源，进而触发误判使管道彻底停止工作。现在资源可以正确且均匀地轮流分配给所有机器。 * **智能休眠调整：** 调整了目标机器满载时的管道休眠惩罚时间。此前，当管道的单次传输量远大于目标机器的存储容量时，管道会因为瞬间填满目标而进入过长的暂停状态，导致明显的传输延迟。现在暂停时间已大幅缩短，并在成功传输后立即恢复正常工作频率，确保传输过程平滑连续。 * **界面数据同步：** 修复了管道界面中自定义频率的数据刷新问题。现在玩家在槽位中放入或取出管道升级卡时，界面上的抽取频率会立刻同步为该升级卡的默认数值，并正确应用，无需再手动重新打开界面。