ВЕРСИИ (26)

# Fixed - Compatibility with Sable / Create Simulated. _Note: there's still various known issues that won't be fixed, specifically network connector cable rendering and projector rendering._ - Server config not reaching clients behind a Velocity proxy (#320).

# Fixed - Compatibility with Sable / Create Simulated. _Note: there's still various known issues that won't be fixed, specifically network connector cable rendering and projector rendering._ - Server config not reaching clients behind a Velocity proxy (#320).

# Added - Power button (#317) default action is now a clean shut down (requesting the guest to shut down). Shift+click reboots, Ctrl+click cuts power. - Linux handles this through a new poweroff/reboot driver. - On a Z80 the button falls back to a hard stop or restart. # Changed ⚠️ Really breaking ⚠️ Shut down computers before updating. If you copied the bundled Lua/MicroPython libraries to a drive, those must be replaced with the new versions. - HLAPI (RPC) protocol changed (multi-blob support, checksums are now CRC32). This is why the libs need updating. - MLAPI memory address changed - RISC-V: moved from 0x03000000 to 0x10000000. - Z80: now comes after other built-in devices, so its port has changed. - Interrupts: dynamically assigned interrupts are now allocated from high to low. New system controller interrupt uses 7, so this can conflict with saved state. - Finding devices by name now takes a list of names and returns the devices that match all of them (#316): - Lua `bus:find(...)` and Python `bus.find(*names)`. - C `mlapi_find(nth, name, ...)` (argument order changed). - Z80 `OCFIND` takes a list of names ending in a double zero byte. - The C helper names were also changed to match the Z80 library. All of this just to make clear: don't be surprised if things break during this upgrade. It's a bit of a pain, but it's some direly needed cleanup that should also avoid such breakages going forward. # Fixed - Fixed a client crash when enchanted armor or elytra is rendered in the projector depth pass (#325). - Fixed the world flickering near a projector while it rains (#321). - Clean reset of the RISC-V board on reboot. The HLAPI state now also resets on boot.

# Added - Power button (#317) default action is now a clean shut down (requesting the guest to shut down). Shift+click reboots, Ctrl+click cuts power. - Linux handles this through a new poweroff/reboot driver. - On a Z80 the button falls back to a hard stop or restart. # Changed ⚠️ Really breaking ⚠️ Shut down computers before updating. If you copied the bundled Lua/MicroPython libraries to a drive, those must be replaced with the new versions. - HLAPI (RPC) protocol changed (multi-blob support, checksums are now CRC32). This is why the libs need updating. - MLAPI memory address changed - RISC-V: moved from 0x03000000 to 0x10000000. - Z80: now comes after other built-in devices, so its port has changed. - Interrupts: dynamically assigned interrupts are now allocated from high to low. New system controller interrupt uses 7, so this can conflict with saved state. - Finding devices by name now takes a list of names and returns the devices that match all of them (#316): - Lua `bus:find(...)` and Python `bus.find(*names)`. - C `mlapi_find(nth, name, ...)` (argument order changed). - Z80 `OCFIND` takes a list of names ending in a double zero byte. - The C helper names were also changed to match the Z80 library. All of this just to make clear: don't be surprised if things break during this upgrade. It's a bit of a pain, but it's some direly needed cleanup that should also avoid such breakages going forward. # Fixed - Fixed a client crash when enchanted armor or elytra is rendered in the projector depth pass (#325). - Fixed the world flickering near a projector while it rains (#321). - Clean reset of the RISC-V board on reboot. The HLAPI state now also resets on boot.

# Changed - Tweak robot movement entity interaction and animation. - Allow MLAPI devices to be found by bus interface label (#316).

# Changed - Tweak robot movement entity interaction and animation. - Allow MLAPI devices to be found by bus interface label (#316).

# Added - Scanner module - Crafting module - Robot built-in position and facing API # Changed - [BREAKING] MLAPI id lookup moved into new global SYSTEM device. - [BREAKING] Mod API cleanup (Invalidatable removed, migrated to Optional). # Fixed - Datapack block devices/flash memory on dedicated server crashing clients (#315). - Stale capabilities in some cases (e.g. item handler on double chests expanding/collapsing).

# Added - Scanner module - Crafting module - Robot built-in position and facing API # Changed - [BREAKING] MLAPI id lookup moved into new global SYSTEM device. - [BREAKING] Mod API cleanup (Invalidatable removed, migrated to Optional). # Fixed - Datapack block devices/flash memory on dedicated server crashing clients (#315). - Stale capabilities in some cases (e.g. item handler on double chests expanding/collapsing).

# Added - Tank operations module - Built-in fluid tank for robots - Devices for more vanilla blocks - Inventory operations module can interact with container items now - MLAPI events - MLAPI available to RISC-V/Linux via `/dev/uio0` - MLAPI support on more devices # Changed - [BREAKING] Transposer: unified some methods into `moveItems`/`moveFluid` - [BREAKING] MLAPI `IOMethod.invoke` takes an object with args and possibility to consume energy now - Transposer now charges energy on move operations - Inventory module charges energy on move operations instead of per tick # Fixed - Fabric: chargers not charging items.

# Added - Tank operations module - Built-in fluid tank for robots - Devices for more vanilla blocks - Inventory operations module can interact with container items now - MLAPI events - MLAPI available to RISC-V/Linux via `/dev/uio0` - MLAPI support on more devices # Changed - [BREAKING] Transposer: unified some methods into `moveItems`/`moveFluid` - [BREAKING] MLAPI `IOMethod.invoke` takes an object with args and possibility to consume energy now - Transposer now charges energy on move operations - Inventory module charges energy on move operations instead of per tick # Fixed - Fabric: chargers not charging items.

# Added - Projectors can be ceiling mounted (and vertically) (#170). - Config options for the capacity of memory, hard drives and floppy disks (#50). # Fixed - Crash when using removable media drives (#312). - Lua's and Python's default search paths (#313). - Z80: extra RAM no longer blocks boot. - MLAPI: multiple devices on the same block face properly show up as separate devices now. - Various smaller fixes. --- <img width="2521" height="1428" alt="2026-09-25_13 27 07" src="https://github.com/user-attachments/assets/cfde4630-fbe3-4d0f-8974-a5e43b0350e3" />

# Added - Projectors can be ceiling mounted (and vertically) (#170). - Config options for the capacity of memory, hard drives and floppy disks (#50). # Fixed - Crash when using removable media drives (#312). - Lua's and Python's default search paths (#313). - Z80: extra RAM no longer blocks boot. - MLAPI: multiple devices on the same block face properly show up as separate devices now. - Various smaller fixes. --- <img width="2521" height="1428" alt="2026-09-25_13 27 07" src="https://github.com/user-attachments/assets/cfde4630-fbe3-4d0f-8974-a5e43b0350e3" />

# Added - Integration for CC:Tweaked, Network Connector is now a peripheral that allows serial communication. - Integration for TIS-3D, Network Connector on Serial Port Module now allows serial data transfer.

# Added - Integration for CC:Tweaked, Network Connector is now a peripheral that allows serial communication. - Integration for TIS-3D, Network Connector on Serial Port Module now allows serial data transfer.

## Added - Transposer block - MLAPI for robot movement - RPC device events - E.g. redstone input change now triggers an event ## Changed - [BREAKING] API around device docs; visitor path is gone now, to allow statically generating API docs in the manual ## Fixed - Some more projector vs shader bugs

## Added - Transposer block - MLAPI for robot movement - RPC device events - E.g. redstone input change now triggers an event ## Changed - [BREAKING] API around device docs; visitor path is gone now, to allow statically generating API docs in the manual ## Fixed - Some more projector vs shader bugs

## Added - Serial interface card - Terminal block ## Changed - Multiple network cards connected to the same side in a computer now all get to send/receive ## Fixed - Race condition in robot unload on chunk unload on servers breaking block devices --- https://github.com/user-attachments/assets/2964e58c-8bd1-4723-b320-8bfb29f257ba

## Added - Serial interface card - Terminal block ## Changed - Multiple network cards connected to the same side in a computer now all get to send/receive ## Fixed - Race condition in robot unload on chunk unload on servers breaking block devices --- https://github.com/user-attachments/assets/2964e58c-8bd1-4723-b320-8bfb29f257ba

## Added - HLAPI for note blocks (can configure instrument and pitch) - MLAPI for item handlers ## Changed - Sound cards are now a real audio device. ## Fixed - Datapack-defined floppies/hdds are now synced to clients so they show up in the creative tab on dedicated servers - Pulling the CPU out of a running computer now stops it with an error instead of letting it run on (#303) - Shader (Iris) compatibility (#302) - Client crash on dedicated servers (#306) - Added back missing item details (regression from the port) - Network cables rendering (lighting, fog) - Fixed projector throttling - Fixed potential crash in projector unload while an encode was running --- https://github.com/user-attachments/assets/f290824a-41b6-43b6-bb76-2157033bfd53

## Added - HLAPI for note blocks (can configure instrument and pitch) - MLAPI for item handlers ## Changed - Sound cards are now a real audio device. ## Fixed - Datapack-defined floppies/hdds are now synced to clients so they show up in the creative tab on dedicated servers - Pulling the CPU out of a running computer now stops it with an error instead of letting it run on (#303) - Shader (Iris) compatibility (#302) - Client crash on dedicated servers (#306) - Added back missing item details (regression from the port) - Network cables rendering (lighting, fog) - Fixed projector throttling - Fixed potential crash in projector unload while an encode was running --- https://github.com/user-attachments/assets/f290824a-41b6-43b6-bb76-2157033bfd53

## Fixed - Projector touching global fog tint state - Network card config ui rendering ## Added - Glow on network connectors when connected to an interface - Glow to charger when powered Also various performance tweaks.

## Fixed - Projector touching global fog tint state - Network card config ui rendering ## Added - Glow on network connectors when connected to an interface - Glow to charger when powered Also various performance tweaks.

## Fixed - Fabric losing RAM state across chunk unload/load - Robots losing their state on chunk unload/load - Bus scan race condition in devices load - NPE in cable rendering on Fabric (#299) - Side configurability for network cards - Various smaller things ## Added - Internet gateway (#63) to access the actual internet from ingame - Config defaults to enabled for now - All local network access is blocked and it's heavily throttled, but do have a look at the config if hosting a server - Set it up by using the `setup-network.lua` script, static ip mode - If you're running a VPN that limits nameserver selection, make sure to use a valid one - Flash drive to write custom bootloaders ingame - Various terminal emulator features, such as CSI sequences, mouse input, alternate screen buffer ## Changed - Performance: block changes that do not actually change the bus no longer trigger a VM worker stall --- ### Custom Flash with Bootloader https://github.com/user-attachments/assets/867aadae-d719-4c8a-adb6-e52ba19d60d6 ### Internet Gateway https://github.com/user-attachments/assets/eec8ee91-2fa6-4288-9107-d0949c049f0d

## Fixed - Fabric losing RAM state across chunk unload/load - Robots losing their state on chunk unload/load - Bus scan race condition in devices load - NPE in cable rendering on Fabric (#299) - Side configurability for network cards - Various smaller things ## Added - Internet gateway (#63) to access the actual internet from ingame - Config defaults to enabled for now - All local network access is blocked and it's heavily throttled, but do have a look at the config if hosting a server - Set it up by using the `setup-network.lua` script, static ip mode - If you're running a VPN that limits nameserver selection, make sure to use a valid one - Flash drive to write custom bootloaders ingame - Various terminal emulator features, such as CSI sequences, mouse input, alternate screen buffer ## Changed - Performance: block changes that do not actually change the bus no longer trigger a VM worker stall --- ### Custom Flash with Bootloader https://github.com/user-attachments/assets/867aadae-d719-4c8a-adb6-e52ba19d60d6 ### Internet Gateway https://github.com/user-attachments/assets/eec8ee91-2fa6-4288-9107-d0949c049f0d

## Fixed - Startup crash on NeoForge (#294) - Computer running sound didn't attenuate with distance (#288) - Projector stayed blank for all but the first player seeing it (#230) - Redstone callbacks mixed up relative sides (#164) - Keyboard didn't count as a terminal user (#186) - JEI couldn't show the computer recipe (#270) - Various more terminal behaviors. ## Added - Network connectors can now sit on fences (#225) - fdisk on Linux rootfs and disk geometry for block devices (#47) - Console keymaps (#147) - Linux swap support (#268) - Robot API, `detect(side)` (#108) - Device documentation for robot modules (#243) - Return-value descriptions now reach guests (#232) ## Changed - [**BREAKING**] Block device data unification (#127) - firmware, hard drive and floppy images now all support datapack content under `data/oc2/block_devices/{hdd,floppy,flash}/`. The actual binary `.bin` has to sit next to the descriptor `.json`. ## Translations - Italian (#289) - Chinese (#183, #245) - Portuguese (#227)

## Fixed - Startup crash on NeoForge (#294) - Computer running sound didn't attenuate with distance (#288) - Projector stayed blank for all but the first player seeing it (#230) - Redstone callbacks mixed up relative sides (#164) - Keyboard didn't count as a terminal user (#186) - JEI couldn't show the computer recipe (#270) - Various more terminal behaviors. ## Added - Network connectors can now sit on fences (#225) - fdisk on Linux rootfs and disk geometry for block devices (#47) - Console keymaps (#147) - Linux swap support (#268) - Robot API, `detect(side)` (#108) - Device documentation for robot modules (#243) - Return-value descriptions now reach guests (#232) ## Changed - [**BREAKING**] Block device data unification (#127) - firmware, hard drive and floppy images now all support datapack content under `data/oc2/block_devices/{hdd,floppy,flash}/`. The actual binary `.bin` has to sit next to the descriptor `.json`. ## Translations - Italian (#289) - Chinese (#183, #245) - Portuguese (#227)