ВЕРСИИ (181)

- Port of mod version 1.1.10 to Fabric 26.3 - Refractory and code readaptation for 26.3

- Port of mod version 1.1.10 to NeoForge 1.21.1

- Port of mod version 1.1.10 to Forge 1.20.1

- Port of mod version 1.1.0 to Fabric 1.20.1

- Port of mod version 1.1.10 to Fabric 1.21.1-5

- Port of mod version 1.1.10 to Fabric 1.21.6-11

- Port of mod version 1.1.10 to Fabric 26.1.X

- Now 0 value can be used in the wave magnification parameter - Partial rollback of the zone 6 polar region behavior prior to the 1.1.7 update. I'm sorry for the rollback but it was causing unwanted problems. - The polar region is again duplicated in looping mode 5/6 for coherence with the rest of the code. If you don't want this remember to half the coverage of the zone 6 MANUALLY. Also the equatorial zone is a double band as always, deal with it as you prefer. - I will remember this also here: part of the band 5 is covered in snow, so if the pole seems too large consider that part of it can be confused with the snow covered part of band 5.

- Added "last_bedrock_y_level" parameter - Bug fixes of the generation for 26.1 + versions

- Added "last_bedrock_y_level" parameter - Bug fixes of the generation for 26.1 + versions

- Port of mod version 1.21.1 to Neoforge 1.21.1

- Port of mod version 1.1.8 to Forge 1.20.1

- Port of mod version 1.1.8 to FABRIC 1.20.1

- Port of mod version 1.1.7 to Fabric 1.21.1-5 - Added missing config parameters injection protocol

- Port of mod version 1.1.7 to FABRIC 26.2.X

- Port of mod version 1.1.7 to FABRIC 26.1.X

- Added CIRCULAR 6 (rings) mode - Added CUSTOM CIRCULAR 6 mode - Added SQUARE mode - Added CUSTOM SQUARE mode - Legacy CIRCULAR mode in now affected by % coverage parameters - Fine tuning of looping BANDED and CUSTOM BANDED mode, this change affect the poles increasing the fidelity with the % coverage zone 6 parameter

- Port of mod version 1.1.6 to Fabric 1.20.1

- Port of mod version 1.1.6 to Fabric 1.21.1-5

- Port of mod version 1.1.6 to fabric 1.21.6-11

- Port of mod version 1.1.6 to fabric 26.1.X

- Port of mod version 1.1.6 to fabric 26.2 - Fixed major bug with modes 5 and 6 in fabric 26.X

- Port of mod version 1.1.6 to Forge and NeoForge 1.20.1

- Added influence setting

- Humidity bands can now be enabled in modes 5 and 6

- Port of mod version 1.1.4 to Neoforge 1.21.1

- Port of mod version 1.1.4 to forge 1.20.1

- Port of mod version 1.1.4 to fabric 1.20.1

- Adaptation of the wave randomizer for older minecraft versions - Port of the 1.1.3 features

- Port of mod version 1.1.3 to fabric 1.21.6-11

- Refractory of the code - Fixed the randomizer of the waves - Added "show_gui_button" as a manual option in config file to hide the NT button on the main menu - Added manual option "humidity_offset" in config file to move the humidity bands west/east - Humidity bands can now be used also in modes 3 and 4

- Fixed a bug that did not allow to select modes 5 and 6 in NeoForge

- Port to version 1.1.1 to NeoForge 26.1 - 26.1.1

- Port of mod version 1.1.1 to fabric 26.1/26.1.1/26.1.2

- NT button moved to the main menu

- Port of mod version 1.1.0 to Fabric 1.21.6-11

- Port of mod version 1.1.0 to Fabric 1.21.1-5

- Port of mod version 1.1.0 to fabric 1.20.1

- Port of mod version 1.1.0 to NeoForge 1.21.11

- Port of mod version 1.1.0 to NeoForge 1.21.6-10

- Port of mod version 1.1.0 to NeoForge 1.21.5

- Port of mod version 1.1.0 to NeoForge 1.21.4

- Port of mod version 1.1.0 to neoforge 1.21.1

- Total refractory of the code - Introduction of an in game gui to modify the settings without restart - Added humidity zone 1,2,3,4,5,6 parameters to customize some of the modes - Added temperature zone 5,6 parameters - Updated mode 3 (custom circular). Now it can be customized with humidity zone 1,2,3,4 parameters - Added modes 5 and 6 (custom banded and banded) - Added coverage % of the zones parameters to customize the coverage of the bands in modes 5 and 6 - Added an integrated API to support addons that can add new modes for natural temperature - Added 5 slots to activate addons

- Small bug fixes

- Port of mod version 1.0.18 to NeoForge 1.21.6-10

- Port of mod version 1.0.18 to neoforge 1.21.1-5

- Port of mod version 1.0.18 to forge 1.20.1

- Port of mod version 1.0.18 to fabric 1.20.1 - Added missing icon

- Added config option "humidity_bands_width" to manage humidty bands if active - Improved transitions in circular and custom circular mode

- Improved transition between climatic bands - Improved poles - Added an option in config file "enable_humidity_bands" to add bands based on humidity values that are perpendicular to the temperature bands

- Bug fixing in zone 4 of circular and custom circular modes

- Fixed a bug in the zone 4 of custom circular mode

- Port to fabric 1.21.x of mod version 1.0.15.2

- Port to fabric 1.20.1 of version 1.0.15.2

- Port to Forge 1.20.1 mod version 1.0.15.2

- Port to NeoForge 1.21.6, 1.21.7, 1.21.8, 1.21.9, 1.21.10 of mod version 1.0.15.2

- Port to NeoForge 1.21.1-5 of mod version 1.0.15.2 - Small bug fixes

- Port to Forge 1.20.1 mod version 1.0.15.1

- Port to fabric 1.20.1 of version 1.0.15.1

- Fine tuning of the transition wave - wave_magnification is now 2.0 by default in the config file

- Improved trasition between the bands of biomes - The transition wave can now be mofied using the config option "wave_magnification" - Eccentric mode renamed and updated in Custom Circular mode - Custom Circular mode is now fully cutomizable using config options "temperature_zone_1/2/3/4" - Added mode Circular, basically the simplified mode in a circular shape

### This version is BUGGED probably due to the latest Neoforge changes ### The first chunk at 0,0 will be random and the nearby spawned structures will be affected. Idk what it's happening, probably some of the processes are out out of sync. The rest of the world seems fine except for the first chunk - Port to NeoForge 1.21.11 of mod version 1.0.14

- Port to NeoForge 1.21.6, 1.21.7, 1.21.8, 1.21.9, 1.21.10 of mod version 1.0.14

- Port to NeoForge 1.21.1-5 of mod version 1.0.14

- Port to Forge 1.20.1 mod version 1.0.14

- Port to fabric 1.20.1 mod version 1.0.14

- Improved jungle region - Added extra_bands parameter to the config file - This improve compatibility

- Port to NeoForge 1.21.6, 1.21.7, 1.21.8, 1.21.9, 1.21.10 of mod version 1.0.13

- Port to NeoForge 1.21.1, 1.21.2, 1.21.3, 1.21.4, 1.21.5 of mod version 1.0.13

- Port to Forge and Neoforge 1.20.1

- Port to fabric 1.20.1

- Added Eccentric World Generation - Added underground_randomization_type 2, enabling underground randomization also under jungles.

- Added compatibility with flashback mod and other mods

- Added compatibility with flashback mod and other mods

- Added compatibility with blueprint mod

- Port to NeoForge 1.21.6, 1.21.7, 1.21.8, 1.21.9, 1.21.10 of mod version 1.0.11

- Port to NeoForge 1.21.1, 1.21.2, 1.21.3, 1.21.4, 1.21.5 of mod version 1.0.11

- Port to Forge 1.20.1 of mod version 1.0.11

- Port to Fabric 1.20.1 of mod version 1.0.11 - Minor 1.20 versions can now be loaded, but I don't guarantee full compatibility

- [1.0.10] Implemented full compatibility with terrablender - [1.0.10] Added global modifiers in the config - [1.0.11] Improved underground - [1.0.11] All mod versions for MC 1.21 are now merged in a single mod version for MC 1.21.X - [1.0.11] MC 1.21.2 and 1.21.3 are now supported

- Port to fabric 1.21.4 of mod version 1.0.10

- Port to Fabric 1.21.1 of mod version 1.0.10 - Global modifiers renamed, so you may need to update the config

- Port to Forge 1.20.1 of mod version 1.0.10

- Implemented full compatibility with terrablender - Added "global_temperature_modifier_percentage" parameter in config file - Added "global_mitigation_percentage" parameter in config file

- Port to NeoForge 1.21.10 of mod version 1.0.9

- Port to Fabric 1.21.10 of mod version 1.0.9

- Port to NeoForge 1.21.9 of mod version 1.0.9

- Port to FABRIC 1.21.9 of mod version 1.0.9

- Port to NeoForge 1.21.8 of mod version 1.0.9

- Port to NeoForge 1.21.7 of mod version 1.0.9

- Port to NeoForge 1.21.6 of mod version 1.0.9

- Port to NeoForge 1.21.5 of mod version 1.0.9

- Port to NeoForge 1.21.4 of mod version 1.0.9

- Port to NeoForge 1.21.1 of mod version 1.0.9

- Port to fabric 1.21.8 of mod version 1.0.9

- Port to fabric 1.21.7 of mod version 1.0.9

- Port to fabric 1.21.6 of mod version 1.0.9

- Port to fabric 1.21.5 of mod version 1.0.9

- Port to fabric 1.21.4 of mod version 1.0.9

- Port to fabric 1.21.1 of mod version 1.0.9

- Port to forge 1.20.1 of mod version 1.0.9

- Fixed major bug with other dimesions: banded biome distribution now only applies to the Overworld

- Port of mod version 1.0.8.2 to minecraft 1.21.8

- Port of mod version 1.0.8.2 to minecraft 1.21.7

- Port of mod version 1.0.8.2 to minecraft 1.21.6

- Port of mod version 1.0.8.2 to minecraft 1.21.5

- Port of mod version 1.0.8.2 to minecraft 1.21.4

- Port of mod version 1.0.8.2 to minecraft 1.20.1

- Improved biomes distribution - Fixed bugged band between savanna and jungle - Improved transitions between biomes - Fixed razor-like biome lines - Added option to manage underground biomes generation - Added a way to prevent bands from generating in the Nether - This option is disabled to enable compatibility with some Nether mods, you can activate it in the config

- Updated to 1.21.8 for fabric

- Port to NeoForge 1.21.8 of version 1.0.7b

- Port to NeoForge 1.21.7 of version 1.0.7b

- Port to NeoForge 1.21.6 of version 1.0.7b

- Port to NeoForge 1.21.5 of version 1.0.7b

- Port to NeoForge of version 1.0.7b

- Fixed the issue that prevented the use of negative numbers in the offset setting.

- Fixed the issue that prevented the use of negative numbers in the offset setting.

- Port to NeoForge 1.21.1 of the mod version 1.0.7

- Port to Forge 1.20.1 of the version 1.0.7

- Port to 1.20.1

- Port to fabric 1.21.1

- Port to fabric 1.21.4

- Port to 1.21.5 of the 1.0.7 version

- Port to 1.21.6

- Added equator_offset in config to move the equator where you want

-Updated to facric mc 1.21.7

-Added Modes for the world generation in config files: DEFAULT, SIMPLIFIED (v.1.0.4 generation), LINEAR (Cold in the north and hot in the south)

- Updated to 1.21.6

- Port to Neoforge 1.21.5

- Port to Neoforge 1.21.4

- Bug fixes

- Port to Neoforge 1.21.1 - Bug fixes

- Port to forge and neoforge 1.20.1 of 1.0.5 mod version

- Port to fabric 1.20.1

-Port to fabric 1.21.1

- port to minecraft 1.21.4

- Reworked tropical region, now jungles will spawn at the equator like in real life. Deserts will be in the adjacent regions - Added transition between deserts and jungles - Fixed some imperfections of the prototype version

-Improved tropical zone

### WARNING- You may need to delete the config file - Changed the math in the code - Added an option in config to generate a world that loop the biomes' distribution after the very cold regions - Port to NeoForge 1.21.4

#WARNING- You may need to delete the config file - Changed the math in the code - Added an option in config to generate a world that loop the biomes' distribution after the very cold regions - Port to NeoForge 1.21.5

WARNING- You may need to delete the config file - Changed the math in the code - Added an option in config to generate a world that loop the biomes' distribution after the very cold regions - Port to Fabric 1.21.1

WARNING: You may need to delete the config file - Changed the math in the code - Added an option in config to generate a world that loop the biomes' distribution after the very cold regions - Port to Forge 1.20.1

WARNING- You may need to delete the config file - Changed the math in the code - Added an option in config to generate a world that loop the biomes' distribution after the very cold regions - Port to Neoforge 1.21.1

WARNING- You may need to delete the config file - Changed the math in the code - Added an option in config to generate a world that loop the biomes' distribution after the very cold regions - Port to Fabric 1.20.1

WARNING- You may need to delete the config file - Changed the math in the code - Added an option in config to generate a world that loop the biomes' distribution after the very cold regions - Port to 1.21.4

WARNING- You may need to delete the config file - Changed the math in the code - Added an option in config to generate a world that loop the biomes' distribution after the very cold regions

-Port to forge 1.21.1

- Port to forge 1.20.1

-Port to 1.21.5

-Port to Neoforge 1.21.4

-Port to 1.21.1

- Port to 1.20.1

Update to 1.21.5

Iproved biomes transition at the poles and temperature distribution at the poles