ВЕРСИИ (34)

# Meow Anti-Xray 1.7.0 更新日志 这是面向 Minecraft 26.1 / 26.1.1 / 26.1.2 的 1.7.0 版本。Fabric 与 NeoForge 分别提供安装文件，要求 Java 25。 - 新增 `/antixray config` 生效配置摘要与 `/antixray validate` 只读预检。 - 重载前验证配置；失败时保留原文件及上次有效运行配置，支持 UTF-8 BOM。 - 同步性能诊断和可重复压测工具，异步队列默认保持 16。 - 同步可退出的 bStats 客户端；默认 `service-id=0`，尚未激活上报。 - Fabric 要求 Loader 0.19.5 或更新版本，确保实际联机时区块发送注入正常。 - 修复 NeoForge 26.1 / 26.1.1 的方块破坏事件兼容，避免因事件类改名导致启动失败。 ## 验证 - 完成双 loader 单元测试、发布构建与实际安装服启动。 - 26.1、26.1.1、26.1.2 两端均通过 2 客户端 / 25 秒区块收发与重写检查，0 错误。 - 配置预检、正常重载、错误重载保留原保护及 UTF-8 BOM 检查通过。 - NeoForge 三个补丁版本均通过真实挖掘验证。 --- # Meow Anti-Xray 1.7.0 This release brings the 1.7.0 version line to Minecraft 26.1, 26.1.1, and 26.1.2. Separate Fabric and NeoForge files are provided; Java 25 is required. - Adds `/antixray config` for effective configuration and `/antixray validate` for read-only preflight checks. - Validates before reload; invalid files and the last known good runtime configuration are preserved. UTF-8 BOM is supported. - Updates pressure diagnostics and repeatable test tools; the default async queue remains 16. - Includes the optional bStats client; submission remains inactive with the default `service-id=0`. - Requires Fabric Loader 0.19.5 or newer for compatible chunk-send mixin processing during player login. - Fixes block-break event compatibility on NeoForge 26.1 / 26.1.1 so the older event name no longer prevents startup. ## Validation - Passed dual-loader unit tests, release builds, and standalone packaged-jar startup. - Both loaders on 26.1, 26.1.1, and 26.1.2 passed two-client / 25-second chunk delivery and rewrite checks with zero errors. - Passed config preflight, reload, invalid reload preserving protection, and UTF-8 BOM checks. - All three NeoForge patch versions also passed an actual block-break check.

# Meow Anti-Xray 1.7.0 更新日志 这是面向 Minecraft 26.1 / 26.1.1 / 26.1.2 的 1.7.0 版本。Fabric 与 NeoForge 分别提供安装文件，要求 Java 25。 - 新增 `/antixray config` 生效配置摘要与 `/antixray validate` 只读预检。 - 重载前验证配置；失败时保留原文件及上次有效运行配置，支持 UTF-8 BOM。 - 同步性能诊断和可重复压测工具，异步队列默认保持 16。 - 同步可退出的 bStats 客户端；默认 `service-id=0`，尚未激活上报。 - Fabric 要求 Loader 0.19.5 或更新版本，确保实际联机时区块发送注入正常。 - 修复 NeoForge 26.1 / 26.1.1 的方块破坏事件兼容，避免因事件类改名导致启动失败。 ## 验证 - 完成双 loader 单元测试、发布构建与实际安装服启动。 - 26.1、26.1.1、26.1.2 两端均通过 2 客户端 / 25 秒区块收发与重写检查，0 错误。 - 配置预检、正常重载、错误重载保留原保护及 UTF-8 BOM 检查通过。 - NeoForge 三个补丁版本均通过真实挖掘验证。 --- # Meow Anti-Xray 1.7.0 This release brings the 1.7.0 version line to Minecraft 26.1, 26.1.1, and 26.1.2. Separate Fabric and NeoForge files are provided; Java 25 is required. - Adds `/antixray config` for effective configuration and `/antixray validate` for read-only preflight checks. - Validates before reload; invalid files and the last known good runtime configuration are preserved. UTF-8 BOM is supported. - Updates pressure diagnostics and repeatable test tools; the default async queue remains 16. - Includes the optional bStats client; submission remains inactive with the default `service-id=0`. - Requires Fabric Loader 0.19.5 or newer for compatible chunk-send mixin processing during player login. - Fixes block-break event compatibility on NeoForge 26.1 / 26.1.1 so the older event name no longer prevents startup. ## Validation - Passed dual-loader unit tests, release builds, and standalone packaged-jar startup. - Both loaders on 26.1, 26.1.1, and 26.1.2 passed two-client / 25-second chunk delivery and rewrite checks with zero errors. - Passed config preflight, reload, invalid reload preserving protection, and UTF-8 BOM checks. - All three NeoForge patch versions also passed an actual block-break check.

# Meow Anti-Xray 1.7.0 更新日志 这是面向 Minecraft 26.2 的 1.7.0 版本。Fabric 与 NeoForge 分别提供安装文件，要求 Java 25。 - 与现有 26.2 / 1.6.0 保持反矿透功能一致，统一模组版本号。 - 保留 Minecraft 26.2 专用依赖、区块包适配与协议 776。 - 异步队列默认保持 16，旧配置可继续使用。 - Fabric 要求 Loader 0.19.5 或更新版本，确保实际联机时区块发送注入正常。 ## 验证 - 完成双 loader 单元测试、发布构建与实际安装服启动。 - 26.2 两端均通过 2 客户端 / 25 秒区块收发与重写检查，0 错误。 - 配置预检、正常重载、错误重载保留原保护及 UTF-8 BOM 检查通过。 --- # Meow Anti-Xray 1.7.0 This release brings the 1.7.0 version line to Minecraft 26.2. Separate Fabric and NeoForge files are provided; Java 25 is required. - Aligns the mod version while retaining the anti-xray features of 1.6.0 for Minecraft 26.2. - Retains Minecraft 26.2 dependencies, chunk packet integration, and protocol 776. - The default async queue remains 16; existing configurations remain supported. - Requires Fabric Loader 0.19.5 or newer for compatible chunk-send mixin processing during player login. ## Validation - Passed dual-loader unit tests, release builds, and standalone packaged-jar startup. - Both loaders on 26.2 passed two-client / 25-second chunk delivery and rewrite checks with zero errors. - Passed config preflight, reload, invalid reload preserving protection, and UTF-8 BOM checks.

# Meow Anti-Xray 1.7.0 更新日志 这是面向 Minecraft 26.2 的 1.7.0 版本。Fabric 与 NeoForge 分别提供安装文件，要求 Java 25。 - 与现有 26.2 / 1.6.0 保持反矿透功能一致，统一模组版本号。 - 保留 Minecraft 26.2 专用依赖、区块包适配与协议 776。 - 异步队列默认保持 16，旧配置可继续使用。 - Fabric 要求 Loader 0.19.5 或更新版本，确保实际联机时区块发送注入正常。 ## 验证 - 完成双 loader 单元测试、发布构建与实际安装服启动。 - 26.2 两端均通过 2 客户端 / 25 秒区块收发与重写检查，0 错误。 - 配置预检、正常重载、错误重载保留原保护及 UTF-8 BOM 检查通过。 --- # Meow Anti-Xray 1.7.0 This release brings the 1.7.0 version line to Minecraft 26.2. Separate Fabric and NeoForge files are provided; Java 25 is required. - Aligns the mod version while retaining the anti-xray features of 1.6.0 for Minecraft 26.2. - Retains Minecraft 26.2 dependencies, chunk packet integration, and protocol 776. - The default async queue remains 16; existing configurations remain supported. - Requires Fabric Loader 0.19.5 or newer for compatible chunk-send mixin processing during player login. ## Validation - Passed dual-loader unit tests, release builds, and standalone packaged-jar startup. - Both loaders on 26.2 passed two-client / 25-second chunk delivery and rewrite checks with zero errors. - Passed config preflight, reload, invalid reload preserving protection, and UTF-8 BOM checks.

# Meow Anti-Xray 1.7.0 更新日志 这是面向 Minecraft 26.3 的兼容性版本。 ## 兼容性 - 更新 Minecraft 到 26.3（网络协议 777）。 - 更新 Fabric Loader 到 0.19.5、Fabric API 到 0.161.0+26.3。 - 更新 NeoForge 到 26.3.0.16-beta。 - Fabric 与 NeoForge 均要求 Java 25。 ## 验证 - Fabric 与 NeoForge 均完成单元测试、双 loader 发布构建和实际开发服启动检查。 - 两端 26.3 网络假玩家压测均能进入 play 并收到区块包，2 客户端 25 秒样本均为 0 错误。 --- # Meow Anti-Xray 1.7.0 Changelog This release adds Minecraft 26.3 compatibility. ## Compatibility - Updated Minecraft to 26.3 (network protocol 777). - Updated Fabric Loader to 0.19.5 and Fabric API to 0.161.0+26.3. - Updated NeoForge to 26.3.0.16-beta. - Both loaders require Java 25. ## Verification - Completed unit tests, dual-loader release builds, and real dev-server startup checks for Fabric and NeoForge. - Both 26.3 network fake-player routes entered play and received chunk packets; the 2-client, 25-second samples completed with 0 errors on both loaders.

# Meow Anti-Xray 1.7.0 更新日志 这是面向 Minecraft 26.3 的兼容性版本。 ## 兼容性 - 更新 Minecraft 到 26.3（网络协议 777）。 - 更新 Fabric Loader 到 0.19.5、Fabric API 到 0.161.0+26.3。 - 更新 NeoForge 到 26.3.0.16-beta。 - Fabric 与 NeoForge 均要求 Java 25。 ## 验证 - Fabric 与 NeoForge 均完成单元测试、双 loader 发布构建和实际开发服启动检查。 - 两端 26.3 网络假玩家压测均能进入 play 并收到区块包，2 客户端 25 秒样本均为 0 错误。 --- # Meow Anti-Xray 1.7.0 Changelog This release adds Minecraft 26.3 compatibility. ## Compatibility - Updated Minecraft to 26.3 (network protocol 777). - Updated Fabric Loader to 0.19.5 and Fabric API to 0.161.0+26.3. - Updated NeoForge to 26.3.0.16-beta. - Both loaders require Java 25. ## Verification - Completed unit tests, dual-loader release builds, and real dev-server startup checks for Fabric and NeoForge. - Both 26.3 network fake-player routes entered play and received chunk packets; the 2-client, 25-second samples completed with 0 errors on both loaders.

# Meow Anti-Xray 1.6.0 更新日志 这是面向 Minecraft 26.2 的维护与可观测性版本。 ## 兼容性 - 更新 Fabric Loader、Fabric API 与 NeoForge 依赖到 26.2 线的较新版本。 - Fabric 与 NeoForge 的反矿透行为保持一致。 ## 匿名统计 - 集成可退出的 bStats 匿名统计客户端，用于统计活跃服务器和基础运行时版本。 - 默认生成独立服务器 UUID，不收集服务器地址、名称、玩家名称或玩家 UUID。 - 统计配置位于 `config/meowantixray-bstats.properties`，设置 `enabled=false` 可关闭。 ## 验证 - 完成 Fabric 与 NeoForge 单元测试、构建和启动兼容性检查。 - 保持异步队列默认值为 `16`，不因单次吞吐数据扩大内存压力。 --- # Meow Anti-Xray 1.6.0 Changelog This is a maintenance and observability release for Minecraft 26.2. ## Compatibility - Updated the Fabric Loader, Fabric API, and NeoForge dependencies to newer versions on the 26.2 line. - Kept anti-xray behavior aligned between Fabric and NeoForge. ## Anonymous Metrics - Added an opt-out bStats client for anonymous active-server and basic runtime version metrics. - A separate random server UUID is generated; server addresses, names, player names, and player UUIDs are not collected. - Metrics configuration is stored at `config/meowantixray-bstats.properties`; set `enabled=false` to disable it. ## Verification - Completed Fabric and NeoForge unit tests, builds, and startup compatibility checks. - Kept the default async queue at `16` instead of increasing memory pressure based on a single throughput sample.

# Meow Anti-Xray 1.6.0 更新日志 这是面向 Minecraft 26.2 的维护与可观测性版本。 ## 兼容性 - 更新 Fabric Loader、Fabric API 与 NeoForge 依赖到 26.2 线的较新版本。 - Fabric 与 NeoForge 的反矿透行为保持一致。 ## 匿名统计 - 集成可退出的 bStats 匿名统计客户端，用于统计活跃服务器和基础运行时版本。 - 默认生成独立服务器 UUID，不收集服务器地址、名称、玩家名称或玩家 UUID。 - 统计配置位于 `config/meowantixray-bstats.properties`，设置 `enabled=false` 可关闭。 ## 验证 - 完成 Fabric 与 NeoForge 单元测试、构建和启动兼容性检查。 - 保持异步队列默认值为 `16`，不因单次吞吐数据扩大内存压力。 --- # Meow Anti-Xray 1.6.0 Changelog This is a maintenance and observability release for Minecraft 26.2. ## Compatibility - Updated the Fabric Loader, Fabric API, and NeoForge dependencies to newer versions on the 26.2 line. - Kept anti-xray behavior aligned between Fabric and NeoForge. ## Anonymous Metrics - Added an opt-out bStats client for anonymous active-server and basic runtime version metrics. - A separate random server UUID is generated; server addresses, names, player names, and player UUIDs are not collected. - Metrics configuration is stored at `config/meowantixray-bstats.properties`; set `enabled=false` to disable it. ## Verification - Completed Fabric and NeoForge unit tests, builds, and startup compatibility checks. - Kept the default async queue at `16` instead of increasing memory pressure based on a single throughput sample.

# Meow Anti-Xray 1.5.0 更新日志 这是面向 Minecraft 26.2 的双 Loader 性能基线版本。 ## 性能基线 - 新增可重复的 Fabric / NeoForge 压力矩阵工具，统一记录版本、JDK、CPU、配置校验和、区块吞吐及反矿透运行时指标。 - 完成 Fabric 与 NeoForge 在 8 个网络假玩家、90 秒 spectator 跑图路线下的 queue `0 / 16 / 32 / 64` 筛选。 - 默认 `async-queue-size` 保持为 `16`，优先保证异步任务可以收敛并控制内存压力。 - queue `32` 和 `64` 可作为高内存服务器的手动调优选项，但应结合 `/antixray profile` 观察 `inFlight`、同步 fallback 和压力状态。 ## 兼容性 - 支持 Minecraft `26.2` 与 Java `25`。 - Fabric 与 NeoForge 行为保持对齐。 ## 验证 - 双 Loader 压力样本均为 8/8 客户端进入 play、0 runner errors，并产生非零区块重写任务。 - 完整矩阵与重复样本记录在 `reports/1.5.0-pressure-matrix.md`。 --- # Meow Anti-Xray 1.5.0 Changelog This is the dual-loader performance baseline release for Minecraft 26.2. ## Performance Baseline - Added repeatable Fabric and NeoForge pressure-matrix tooling that records versions, JDK, CPU, config checksums, chunk throughput, and anti-xray runtime counters. - Completed queue `0 / 16 / 32 / 64` screening with eight network fake players on a 90-second spectator route for both loaders. - Kept the default `async-queue-size` at `16` to favor bounded work and predictable memory pressure. - Queues `32` and `64` remain available as manual tuning options for servers with more memory; use `/antixray profile` to watch `inFlight`, sync fallback, and pressure. ## Compatibility - Supports Minecraft `26.2` and Java `25`. - Fabric and NeoForge behavior remains aligned. ## Verification - Every loader sample reached play with 8/8 clients, zero runner errors, and visible rewrite activity. - The complete matrix and repeat samples are recorded in `reports/1.5.0-pressure-matrix.md`.

# Meow Anti-Xray 1.5.0 更新日志 这是面向 Minecraft 26.2 的双 Loader 性能基线版本。 ## 性能基线 - 新增可重复的 Fabric / NeoForge 压力矩阵工具，统一记录版本、JDK、CPU、配置校验和、区块吞吐及反矿透运行时指标。 - 完成 Fabric 与 NeoForge 在 8 个网络假玩家、90 秒 spectator 跑图路线下的 queue `0 / 16 / 32 / 64` 筛选。 - 默认 `async-queue-size` 保持为 `16`，优先保证异步任务可以收敛并控制内存压力。 - queue `32` 和 `64` 可作为高内存服务器的手动调优选项，但应结合 `/antixray profile` 观察 `inFlight`、同步 fallback 和压力状态。 ## 兼容性 - 支持 Minecraft `26.2` 与 Java `25`。 - Fabric 与 NeoForge 行为保持对齐。 ## 验证 - 双 Loader 压力样本均为 8/8 客户端进入 play、0 runner errors，并产生非零区块重写任务。 - 完整矩阵与重复样本记录在 `reports/1.5.0-pressure-matrix.md`。 --- # Meow Anti-Xray 1.5.0 Changelog This is the dual-loader performance baseline release for Minecraft 26.2. ## Performance Baseline - Added repeatable Fabric and NeoForge pressure-matrix tooling that records versions, JDK, CPU, config checksums, chunk throughput, and anti-xray runtime counters. - Completed queue `0 / 16 / 32 / 64` screening with eight network fake players on a 90-second spectator route for both loaders. - Kept the default `async-queue-size` at `16` to favor bounded work and predictable memory pressure. - Queues `32` and `64` remain available as manual tuning options for servers with more memory; use `/antixray profile` to watch `inFlight`, sync fallback, and pressure. ## Compatibility - Supports Minecraft `26.2` and Java `25`. - Fabric and NeoForge behavior remains aligned. ## Verification - Every loader sample reached play with 8/8 clients, zero runner errors, and visible rewrite activity. - The complete matrix and repeat samples are recorded in `reports/1.5.0-pressure-matrix.md`.

# Meow Anti-Xray 1.4.0 更新日志 这是面向 Minecraft 26.2 的配置安全与诊断版本，合并了原计划中的 1.3.2 与 1.4.0。 ## 配置检查 - 新增 OP-only 只读 `/antixray config`，可在游戏、控制台和 RCON 查看当前实际生效的全局、异步及分维度配置摘要。 - 新增 OP-only 只读 `/antixray validate`，在不应用配置的情况下检查磁盘文件，并报告 YAML 格式、布尔值、数值范围、维度、未知方块 ID、空替换列表和重复方块等问题。 - 验证结果会明确显示是否可以安全执行 reload。 ## 安全重载 - `/antixray reload` 现在先完整验证候选配置，再一次性切换运行态。 - 配置读取、格式或方块校验失败时，不覆盖原配置文件，也不使用部分解析结果。 - 运行中 reload 失败会继续使用最后一次有效配置，避免意外削弱反矿透防护。 - 首次启动遇到已有但无效的配置时，保留该文件，并使用内存中的安全默认配置启动。 ## 兼容性 - 支持 Minecraft `26.2` 与 Java `25`。 - Fabric / NeoForge 依赖范围不变。 --- # Meow Anti-Xray 1.4.0 Changelog This Minecraft 26.2 release combines the previously planned 1.3.2 diagnostics work with the 1.4.0 configuration-safety iteration. ## Configuration Checks - Added OP-only read-only `/antixray config` for effective global, async, and per-dimension configuration summaries in game, console, and RCON. - Added OP-only read-only `/antixray validate`, which checks the file on disk without applying it and reports YAML syntax, boolean values, numeric ranges, dimensions, unknown block ids, empty replacement lists, and duplicate blocks. - Validation clearly reports whether reload is safe. ## Safe Reload - `/antixray reload` now fully validates a candidate configuration before atomically switching the runtime state. - Read, syntax, or block validation failures no longer overwrite the existing file or activate partially parsed values. - A failed runtime reload retains the last-known-good configuration so protection is not unexpectedly weakened. - If an existing config is invalid during first startup, the file is preserved and safe in-memory defaults are used. ## Compatibility - Supports Minecraft `26.2` and Java `25`. - Fabric and NeoForge dependency ranges are unchanged.

# Meow Anti-Xray 1.4.0 更新日志 这是面向 Minecraft 26.2 的配置安全与诊断版本，合并了原计划中的 1.3.2 与 1.4.0。 ## 配置检查 - 新增 OP-only 只读 `/antixray config`，可在游戏、控制台和 RCON 查看当前实际生效的全局、异步及分维度配置摘要。 - 新增 OP-only 只读 `/antixray validate`，在不应用配置的情况下检查磁盘文件，并报告 YAML 格式、布尔值、数值范围、维度、未知方块 ID、空替换列表和重复方块等问题。 - 验证结果会明确显示是否可以安全执行 reload。 ## 安全重载 - `/antixray reload` 现在先完整验证候选配置，再一次性切换运行态。 - 配置读取、格式或方块校验失败时，不覆盖原配置文件，也不使用部分解析结果。 - 运行中 reload 失败会继续使用最后一次有效配置，避免意外削弱反矿透防护。 - 首次启动遇到已有但无效的配置时，保留该文件，并使用内存中的安全默认配置启动。 ## 兼容性 - 支持 Minecraft `26.2` 与 Java `25`。 - Fabric / NeoForge 依赖范围不变。 --- # Meow Anti-Xray 1.4.0 Changelog This Minecraft 26.2 release combines the previously planned 1.3.2 diagnostics work with the 1.4.0 configuration-safety iteration. ## Configuration Checks - Added OP-only read-only `/antixray config` for effective global, async, and per-dimension configuration summaries in game, console, and RCON. - Added OP-only read-only `/antixray validate`, which checks the file on disk without applying it and reports YAML syntax, boolean values, numeric ranges, dimensions, unknown block ids, empty replacement lists, and duplicate blocks. - Validation clearly reports whether reload is safe. ## Safe Reload - `/antixray reload` now fully validates a candidate configuration before atomically switching the runtime state. - Read, syntax, or block validation failures no longer overwrite the existing file or activate partially parsed values. - A failed runtime reload retains the last-known-good configuration so protection is not unexpectedly weakened. - If an existing config is invalid during first startup, the file is preserved and safe in-memory defaults are used. ## Compatibility - Supports Minecraft `26.2` and Java `25`. - Fabric and NeoForge dependency ranges are unchanged.

# Meow Anti-Xray 1.2.3 更新日志 这是面向 Minecraft 26.1.x 维护线的 Paper parity 小版本。 ## Paper 对齐 - 假块选择的运行期随机种子改为非零 `ThreadLocalRandom`，再沿用 xorshift 与无符号 bounded scaling，更贴近 Paper anti-xray 的随机假块选择方式。 - 补充 Paper transparent override 回归测试，锁定 spawner、barrier、shulker box、slime block、mangrove roots 不作为实心遮挡参与暴露判断。 ## 兼容性 - 继续支持 Minecraft `26.1`、`26.1.1`、`26.1.2`。 - Fabric / NeoForge 依赖范围不变。 ## 验证 - `node --check tools\mc-2612-load-runner.js` - `.\gradlew.bat clean test :neoforge:test releaseAllLoaders --console=plain` --- # Meow Anti-Xray 1.2.3 Changelog This is a Paper parity patch release for the Minecraft 26.1.x maintenance line. ## Paper Parity - Fake block selection now uses a non-zero `ThreadLocalRandom` runtime seed, followed by xorshift and unsigned bounded scaling, closer to Paper anti-xray's random fake block selection. - Added regression coverage for Paper transparent overrides, locking spawner, barrier, shulker boxes, slime block, and mangrove roots as non-solid blockers for exposure checks. ## Compatibility - Continues to support Minecraft `26.1`, `26.1.1`, and `26.1.2`. - Fabric / NeoForge dependency ranges are unchanged. ## Verification - `node --check tools\mc-2612-load-runner.js` - `.\gradlew.bat clean test :neoforge:test releaseAllLoaders --console=plain`

# Meow Anti-Xray 1.2.3 更新日志 这是面向 Minecraft 26.1.x 维护线的 Paper parity 小版本。 ## Paper 对齐 - 假块选择的运行期随机种子改为非零 `ThreadLocalRandom`，再沿用 xorshift 与无符号 bounded scaling，更贴近 Paper anti-xray 的随机假块选择方式。 - 补充 Paper transparent override 回归测试，锁定 spawner、barrier、shulker box、slime block、mangrove roots 不作为实心遮挡参与暴露判断。 ## 兼容性 - 继续支持 Minecraft `26.1`、`26.1.1`、`26.1.2`。 - Fabric / NeoForge 依赖范围不变。 ## 验证 - `node --check tools\mc-2612-load-runner.js` - `.\gradlew.bat clean test :neoforge:test releaseAllLoaders --console=plain` --- # Meow Anti-Xray 1.2.3 Changelog This is a Paper parity patch release for the Minecraft 26.1.x maintenance line. ## Paper Parity - Fake block selection now uses a non-zero `ThreadLocalRandom` runtime seed, followed by xorshift and unsigned bounded scaling, closer to Paper anti-xray's random fake block selection. - Added regression coverage for Paper transparent overrides, locking spawner, barrier, shulker boxes, slime block, and mangrove roots as non-solid blockers for exposure checks. ## Compatibility - Continues to support Minecraft `26.1`, `26.1.1`, and `26.1.2`. - Fabric / NeoForge dependency ranges are unchanged. ## Verification - `node --check tools\mc-2612-load-runner.js` - `.\gradlew.bat clean test :neoforge:test releaseAllLoaders --console=plain`

# Meow Anti-Xray 1.3.1 更新日志 这是面向 Minecraft 26.2 的 Paper parity 小版本。 ## Paper 对齐 - 假块选择的运行期随机种子改为非零 `ThreadLocalRandom`，再沿用 xorshift 与无符号 bounded scaling，更贴近 Paper anti-xray 的随机假块选择方式。 - 补充 Paper transparent override 回归测试，锁定 spawner、barrier、shulker box、slime block、mangrove roots 不作为实心遮挡参与暴露判断。 ## 兼容性 - 继续支持 Minecraft `26.2`。 - Fabric / NeoForge 依赖范围不变。 ## 验证 - `node --check tools\mc-2612-load-runner.js` - `.\gradlew.bat clean test :neoforge:test releaseAllLoaders --console=plain` - Fabric `runServer` 真实启动通过，2 个 Minecraft 26.2 假网络玩家 RCON spectator 跑图 `26s`：`chunks=4980`、`batches=383`、`errors=0`，`/antixray profile` 显示 `rewriteTasks=4980`。 - NeoForge `:neoforge:runServer` 真实启动通过，`/antixray status` 确认 `loader=neoforge, version=1.3.1, minecraft=26.2`；短跑图中假玩家可登录和 RCON 传送，但本地短测未触发 chunk rewrite，后续仍需继续跟进 NeoForge 压测链路。 --- # Meow Anti-Xray 1.3.1 Changelog This is a Paper parity patch release for Minecraft 26.2. ## Paper Parity - Fake block selection now uses a non-zero `ThreadLocalRandom` runtime seed, followed by xorshift and unsigned bounded scaling, closer to Paper anti-xray's random fake block selection. - Added regression coverage for Paper transparent overrides, locking spawner, barrier, shulker boxes, slime block, and mangrove roots as non-solid blockers for exposure checks. ## Compatibility - Continues to support Minecraft `26.2`. - Fabric / NeoForge dependency ranges are unchanged. ## Verification - `node --check tools\mc-2612-load-runner.js` - `.\gradlew.bat clean test :neoforge:test releaseAllLoaders --console=plain` - Fabric `runServer` real startup passed. A 2-client Minecraft 26.2 RCON spectator smoke ran for `26s` with `chunks=4980`, `batches=383`, `errors=0`, and `/antixray profile` reported `rewriteTasks=4980`. - NeoForge `:neoforge:runServer` real startup passed, and `/antixray status` confirmed `loader=neoforge, version=1.3.1, minecraft=26.2`. The short local run allowed fake clients to log in and receive RCON teleports, but did not trigger chunk rewrite work; the NeoForge pressure path still needs follow-up.

# Meow Anti-Xray 1.3.1 更新日志 这是面向 Minecraft 26.2 的 Paper parity 小版本。 ## Paper 对齐 - 假块选择的运行期随机种子改为非零 `ThreadLocalRandom`，再沿用 xorshift 与无符号 bounded scaling，更贴近 Paper anti-xray 的随机假块选择方式。 - 补充 Paper transparent override 回归测试，锁定 spawner、barrier、shulker box、slime block、mangrove roots 不作为实心遮挡参与暴露判断。 ## 兼容性 - 继续支持 Minecraft `26.2`。 - Fabric / NeoForge 依赖范围不变。 ## 验证 - `node --check tools\mc-2612-load-runner.js` - `.\gradlew.bat clean test :neoforge:test releaseAllLoaders --console=plain` - Fabric `runServer` 真实启动通过，2 个 Minecraft 26.2 假网络玩家 RCON spectator 跑图 `26s`：`chunks=4980`、`batches=383`、`errors=0`，`/antixray profile` 显示 `rewriteTasks=4980`。 - NeoForge `:neoforge:runServer` 真实启动通过，`/antixray status` 确认 `loader=neoforge, version=1.3.1, minecraft=26.2`；短跑图中假玩家可登录和 RCON 传送，但本地短测未触发 chunk rewrite，后续仍需继续跟进 NeoForge 压测链路。 --- # Meow Anti-Xray 1.3.1 Changelog This is a Paper parity patch release for Minecraft 26.2. ## Paper Parity - Fake block selection now uses a non-zero `ThreadLocalRandom` runtime seed, followed by xorshift and unsigned bounded scaling, closer to Paper anti-xray's random fake block selection. - Added regression coverage for Paper transparent overrides, locking spawner, barrier, shulker boxes, slime block, and mangrove roots as non-solid blockers for exposure checks. ## Compatibility - Continues to support Minecraft `26.2`. - Fabric / NeoForge dependency ranges are unchanged. ## Verification - `node --check tools\mc-2612-load-runner.js` - `.\gradlew.bat clean test :neoforge:test releaseAllLoaders --console=plain` - Fabric `runServer` real startup passed. A 2-client Minecraft 26.2 RCON spectator smoke ran for `26s` with `chunks=4980`, `batches=383`, `errors=0`, and `/antixray profile` reported `rewriteTasks=4980`. - NeoForge `:neoforge:runServer` real startup passed, and `/antixray status` confirmed `loader=neoforge, version=1.3.1, minecraft=26.2`. The short local run allowed fake clients to log in and receive RCON teleports, but did not trigger chunk rewrite work; the NeoForge pressure path still needs follow-up.

# Meow Anti-Xray 1.3.0 更新日志 这是面向 Minecraft 26.2 的兼容与验证版本，重点是升级双 loader 依赖、校准官方版本信息，并补齐 26.2 下的真实压测结果。 ## 兼容性 - 支持 Minecraft `26.2`，Java 语言级别保持 `25`。 - Fabric 侧升级到 Fabric Loader `0.19.3` 与 Fabric API `0.153.0+26.2`。 - NeoForge 侧升级到 `26.2.0.7-beta`。 - Fabric metadata 现在限制为 `>=26.2 <26.3`；NeoForge Minecraft 范围为 `[26.2,26.3)`。 ## 压测工具 - `tools/mc-2612-load-runner.js` 新增 `--mc-version 26.2` 协议 profile，默认使用 Minecraft 26.2 / protocol `776`。 - 保留 `26.1.2` / protocol `775` profile，便于回归旧版本。 - 修正 26.2 configuration 阶段 custom payload 处理：不再把服务端插件消息原样回发，避免服务端按新的 serverbound payload codec 解码失败。 ## 压测结果 本轮使用默认 `async-queue-size=16`，8 个网络假玩家通过 RCON spectator 传送持续制造区块发送压力： | Loader | 时长 | 区块包 | 吞吐 | 客户端错误 | rewrite 平均耗时 | sync fallback | | --- | ---: | ---: | ---: | ---: | ---: | ---: | | Fabric | `92s` | `32,893` | `357.49 chunks/s` | `0` | `2.839ms` | `42.0%` | | NeoForge | `92s` | `35,593` | `386.86 chunks/s` | `0` | `2.719ms` | `39.0%` | `pressure=saturated` 在这种高压跑图下是预期信号，表示默认队列背压正在限制异步任务堆积，优先保护内存稳定。 ## Paper 对齐 - 已复查 PaperMC/Paper `main`，远端 HEAD 仍为 `76d2ac758cb3abe75aceefa88207443768f585c6`，与项目既有 Paper anti-xray parity 基线一致。 - Paper anti-xray 默认配置、hidden/replacement 逻辑与权限节点未发现新的上游变化，本轮不需要额外调整核心反矿透行为。 ## 验证 - `node --check tools\mc-2612-load-runner.js` 通过。 - Fabric 与 NeoForge 26.2 dev server 均启动到 `Done`，`/antixray status` 确认 `version=1.3.0`、`minecraft=26.2`。 - `.\gradlew.bat clean test :neoforge:test releaseAllLoaders --console=plain` 通过。 - 已检查 `build/release/meowantixray-fabric-1.3.0.jar` 与 `build/release/meowantixray-neoforge-1.3.0.jar` 的内嵌 metadata，版本号与 26.2 依赖范围正确。 - 完整压测报告见 `reports/1.3.0-minecraft-26.2-pressure-report.md`。 --- # Meow Anti-Xray 1.3.0 Changelog This release updates Meow Anti-Xray for Minecraft 26.2, refreshes the loader dependencies from official sources, and adds new 26.2 stress-test results. ## Compatibility - Supports Minecraft `26.2`; Java remains `25`. - Fabric now targets Fabric Loader `0.19.3` and Fabric API `0.153.0+26.2`. - NeoForge now targets `26.2.0.7-beta`. - Fabric metadata now requires `>=26.2 <26.3`; NeoForge's Minecraft range is `[26.2,26.3)`. ## Load Runner - `tools/mc-2612-load-runner.js` now supports `--mc-version 26.2`, using Minecraft 26.2 / protocol `776` by default. - The previous `26.1.2` / protocol `775` profile is still available for regression checks. - Fixed configuration-stage custom payload handling for 26.2 by no longer echoing server plugin messages back as serverbound payloads. ## Stress Test Results These runs used the default `async-queue-size=16` with 8 fake network players driven by RCON spectator teleports: | Loader | Duration | Chunk packets | Throughput | Client errors | Rewrite avg | Sync fallback | | --- | ---: | ---: | ---: | ---: | ---: | ---: | | Fabric | `92s` | `32,893` | `357.49 chunks/s` | `0` | `2.839ms` | `42.0%` | | NeoForge | `92s` | `35,593` | `386.86 chunks/s` | `0` | `2.719ms` | `39.0%` | Seeing `pressure=saturated` during this synthetic exploration load is expected: the bounded async queue is applying backpressure to protect memory stability. ## Paper Parity - Rechecked PaperMC/Paper `main`; the remote HEAD is still `76d2ac758cb3abe75aceefa88207443768f585c6`, matching this project's existing Paper anti-xray parity baseline. - No new upstream Paper anti-xray defaults, hidden/replacement behavior, or permission-node changes were found, so no core anti-xray behavior change was needed for Paper parity. ## Verification - `node --check tools\mc-2612-load-runner.js` passed. - Both Fabric and NeoForge 26.2 dev servers reached `Done`; `/antixray status` confirmed `version=1.3.0` and `minecraft=26.2`. - `.\gradlew.bat clean test :neoforge:test releaseAllLoaders --console=plain` passed. - Checked embedded metadata in `build/release/meowantixray-fabric-1.3.0.jar` and `build/release/meowantixray-neoforge-1.3.0.jar`; both contain the expected version and 26.2 dependency ranges. - Full stress-test report: `reports/1.3.0-minecraft-26.2-pressure-report.md`.

# Meow Anti-Xray 1.3.0 更新日志 这是面向 Minecraft 26.2 的兼容与验证版本，重点是升级双 loader 依赖、校准官方版本信息，并补齐 26.2 下的真实压测结果。 ## 兼容性 - 支持 Minecraft `26.2`，Java 语言级别保持 `25`。 - Fabric 侧升级到 Fabric Loader `0.19.3` 与 Fabric API `0.153.0+26.2`。 - NeoForge 侧升级到 `26.2.0.7-beta`。 - Fabric metadata 现在限制为 `>=26.2 <26.3`；NeoForge Minecraft 范围为 `[26.2,26.3)`。 ## 压测工具 - `tools/mc-2612-load-runner.js` 新增 `--mc-version 26.2` 协议 profile，默认使用 Minecraft 26.2 / protocol `776`。 - 保留 `26.1.2` / protocol `775` profile，便于回归旧版本。 - 修正 26.2 configuration 阶段 custom payload 处理：不再把服务端插件消息原样回发，避免服务端按新的 serverbound payload codec 解码失败。 ## 压测结果 本轮使用默认 `async-queue-size=16`，8 个网络假玩家通过 RCON spectator 传送持续制造区块发送压力： | Loader | 时长 | 区块包 | 吞吐 | 客户端错误 | rewrite 平均耗时 | sync fallback | | --- | ---: | ---: | ---: | ---: | ---: | ---: | | Fabric | `92s` | `32,893` | `357.49 chunks/s` | `0` | `2.839ms` | `42.0%` | | NeoForge | `92s` | `35,593` | `386.86 chunks/s` | `0` | `2.719ms` | `39.0%` | `pressure=saturated` 在这种高压跑图下是预期信号，表示默认队列背压正在限制异步任务堆积，优先保护内存稳定。 ## Paper 对齐 - 已复查 PaperMC/Paper `main`，远端 HEAD 仍为 `76d2ac758cb3abe75aceefa88207443768f585c6`，与项目既有 Paper anti-xray parity 基线一致。 - Paper anti-xray 默认配置、hidden/replacement 逻辑与权限节点未发现新的上游变化，本轮不需要额外调整核心反矿透行为。 ## 验证 - `node --check tools\mc-2612-load-runner.js` 通过。 - Fabric 与 NeoForge 26.2 dev server 均启动到 `Done`，`/antixray status` 确认 `version=1.3.0`、`minecraft=26.2`。 - `.\gradlew.bat clean test :neoforge:test releaseAllLoaders --console=plain` 通过。 - 已检查 `build/release/meowantixray-fabric-1.3.0.jar` 与 `build/release/meowantixray-neoforge-1.3.0.jar` 的内嵌 metadata，版本号与 26.2 依赖范围正确。 - 完整压测报告见 `reports/1.3.0-minecraft-26.2-pressure-report.md`。 --- # Meow Anti-Xray 1.3.0 Changelog This release updates Meow Anti-Xray for Minecraft 26.2, refreshes the loader dependencies from official sources, and adds new 26.2 stress-test results. ## Compatibility - Supports Minecraft `26.2`; Java remains `25`. - Fabric now targets Fabric Loader `0.19.3` and Fabric API `0.153.0+26.2`. - NeoForge now targets `26.2.0.7-beta`. - Fabric metadata now requires `>=26.2 <26.3`; NeoForge's Minecraft range is `[26.2,26.3)`. ## Load Runner - `tools/mc-2612-load-runner.js` now supports `--mc-version 26.2`, using Minecraft 26.2 / protocol `776` by default. - The previous `26.1.2` / protocol `775` profile is still available for regression checks. - Fixed configuration-stage custom payload handling for 26.2 by no longer echoing server plugin messages back as serverbound payloads. ## Stress Test Results These runs used the default `async-queue-size=16` with 8 fake network players driven by RCON spectator teleports: | Loader | Duration | Chunk packets | Throughput | Client errors | Rewrite avg | Sync fallback | | --- | ---: | ---: | ---: | ---: | ---: | ---: | | Fabric | `92s` | `32,893` | `357.49 chunks/s` | `0` | `2.839ms` | `42.0%` | | NeoForge | `92s` | `35,593` | `386.86 chunks/s` | `0` | `2.719ms` | `39.0%` | Seeing `pressure=saturated` during this synthetic exploration load is expected: the bounded async queue is applying backpressure to protect memory stability. ## Paper Parity - Rechecked PaperMC/Paper `main`; the remote HEAD is still `76d2ac758cb3abe75aceefa88207443768f585c6`, matching this project's existing Paper anti-xray parity baseline. - No new upstream Paper anti-xray defaults, hidden/replacement behavior, or permission-node changes were found, so no core anti-xray behavior change was needed for Paper parity. ## Verification - `node --check tools\mc-2612-load-runner.js` passed. - Both Fabric and NeoForge 26.2 dev servers reached `Done`; `/antixray status` confirmed `version=1.3.0` and `minecraft=26.2`. - `.\gradlew.bat clean test :neoforge:test releaseAllLoaders --console=plain` passed. - Checked embedded metadata in `build/release/meowantixray-fabric-1.3.0.jar` and `build/release/meowantixray-neoforge-1.3.0.jar`; both contain the expected version and 26.2 dependency ranges. - Full stress-test report: `reports/1.3.0-minecraft-26.2-pressure-report.md`.

# Meow Anti-Xray 1.2.2 更新日志 这是一个面向服主使用体验的补丁版本，主要修正命令诊断输出里不够直观的细节。 ## 改进 - `/antixray inspect` 现在会稳定显示标准维度 ID，例如 `minecraft:overworld`，不再出现难读的内部 `ResourceKey[...]` 表示。 - `/antixray status`、`/antixray reload` 和 `/antixray inspect` 在控制台与 RCON 下会整理成更紧凑的单行输出，读取和转发都更方便。 - 游戏内玩家执行这些命令时，仍然保留原本更清晰的多行显示。 ## 验证 - 针对命令输出与诊断结果补充回归测试。 - 执行 `.\gradlew.bat test :neoforge:test buildAllLoaders --console=plain` 通过。 --- # Meow Anti-Xray 1.2.2 Changelog This patch release focuses on command output polish for server owners. ## Improved - `/antixray inspect` now shows stable standard dimension ids such as `minecraft:overworld` instead of exposing hard-to-read internal `ResourceKey[...]` text. - `/antixray status`, `/antixray reload`, and `/antixray inspect` now produce cleaner compact output in console and RCON, making results easier to read and forward. - In-game player output for these commands remains multi-line and easy to scan. ## Verification - Added regression coverage for command output formatting and inspect dimension normalization. - `.\gradlew.bat test :neoforge:test buildAllLoaders --console=plain` passed.

# Meow Anti-Xray 1.2.2 更新日志 这是一个面向服主使用体验的补丁版本，主要修正命令诊断输出里不够直观的细节。 ## 改进 - `/antixray inspect` 现在会稳定显示标准维度 ID，例如 `minecraft:overworld`，不再出现难读的内部 `ResourceKey[...]` 表示。 - `/antixray status`、`/antixray reload` 和 `/antixray inspect` 在控制台与 RCON 下会整理成更紧凑的单行输出，读取和转发都更方便。 - 游戏内玩家执行这些命令时，仍然保留原本更清晰的多行显示。 ## 验证 - 针对命令输出与诊断结果补充回归测试。 - 执行 `.\gradlew.bat test :neoforge:test buildAllLoaders --console=plain` 通过。 --- # Meow Anti-Xray 1.2.2 Changelog This patch release focuses on command output polish for server owners. ## Improved - `/antixray inspect` now shows stable standard dimension ids such as `minecraft:overworld` instead of exposing hard-to-read internal `ResourceKey[...]` text. - `/antixray status`, `/antixray reload`, and `/antixray inspect` now produce cleaner compact output in console and RCON, making results easier to read and forward. - In-game player output for these commands remains multi-line and easy to scan. ## Verification - Added regression coverage for command output formatting and inspect dimension normalization. - `.\gradlew.bat test :neoforge:test buildAllLoaders --console=plain` passed.

# Meow Anti-Xray 1.2.1 更新日志 这是一个偏服主体验与诊断能力增强的维护版本，重点是让你更容易看清当前反矿透到底在用什么配置、reload 后有没有真正生效，以及某个位置为什么会或不会被伪装。 ## 新增与改进 - `/antixray status` 现在会输出更完整的运行状态： - 全局 `enabled`、`engine-mode`、`max-block-height` - async `workerThreads`、`queueSize`、`capacity` - 当前配置文件路径 - 每个维度的 `enabled / mode / max-block-height / hidden / replacement` 计数 - `/antixray reload` 现在会在重载后返回状态摘要，并给出关键配置变化 diff。 - 如果本次重载没有带来实际运行时变化，会明确显示 `changes: no effective runtime changes` - 原 `/antixray debug` 诊断输出升级为多行 inspect 风格结果，并新增正式别名： - `/antixray inspect <world> <x> <y> <z>` - `inspect` 现在会显示： - real / fake 方块 - 是否属于 hidden / replacement / target - 是否在高度范围内 - 是否 exposed、是否 shouldReveal - 当前 `mode`、`update-radius`、权限绕过配置 - 配置兼容再补一层： - 显式空内联列表 `hidden-blocks: []` / `replacement-blocks: []` 现在会按“用户明确配置为空”处理，不再误回退到默认列表 ## 验证 - 单测通过： - `.\gradlew.bat test --tests com.meowantixray.antixray.FakeOreConfigTest --console=plain` - `.\gradlew.bat test --tests com.meowantixray.antixray.FakeOreServiceTest --console=plain` - 全量测试与双 loader 构建通过： - `.\gradlew.bat test :neoforge:test buildAllLoaders --console=plain` - 本地双 loader 命令冒烟通过： - Fabric：`status` / `reload` / `inspect` / `stop` - NeoForge：`status` / `reload` / `inspect` / `stop` ## 兼容性 - Mod ID 仍为 `meowantixray` - 配置文件仍为 `config/meowantixray.yml` - Fabric 与 NeoForge 仍然分别发布独立 jar - Minecraft 兼容范围保持 `26.1`、`26.1.1`、`26.1.2` --- # Meow Anti-Xray 1.2.1 Changelog This maintenance release focuses on server-owner visibility and diagnostics. The goal is to make it much easier to see what anti-xray settings are actually active, whether a reload changed anything, and why a specific block position is or is not being obfuscated. ## Added and Improved - `/antixray status` now reports a fuller runtime view: - global `enabled`, `engine-mode`, and `max-block-height` - async `workerThreads`, `queueSize`, and `capacity` - the active config file path - per-dimension `enabled / mode / max-block-height / hidden / replacement` counts - `/antixray reload` now returns the post-reload state summary together with a diff of important runtime config changes. - If the reload produces no effective runtime change, it explicitly reports `changes: no effective runtime changes` - The original `/antixray debug` output has been upgraded into a multi-line inspect-style diagnostic result, and a formal alias was added: - `/antixray inspect <world> <x> <y> <z>` - `inspect` now shows: - real / fake block state - whether the block is part of the hidden / replacement / target sets - whether it falls inside the configured height range - whether it is exposed and whether it should reveal - current `mode`, `update-radius`, and permission bypass settings - Config compatibility was also tightened again: - explicit empty inline lists such as `hidden-blocks: []` and `replacement-blocks: []` are now treated as intentional user config instead of silently falling back to defaults ## Verification - Targeted tests passed: - `.\gradlew.bat test --tests com.meowantixray.antixray.FakeOreConfigTest --console=plain` - `.\gradlew.bat test --tests com.meowantixray.antixray.FakeOreServiceTest --console=plain` - Full tests and dual-loader build passed: - `.\gradlew.bat test :neoforge:test buildAllLoaders --console=plain` - Local dual-loader command smoke passed: - Fabric: `status` / `reload` / `inspect` / `stop` - NeoForge: `status` / `reload` / `inspect` / `stop` ## Compatibility - Mod ID remains `meowantixray` - Config file remains `config/meowantixray.yml` - Fabric and NeoForge are still published as separate jars - Minecraft compatibility remains `26.1`, `26.1.1`, and `26.1.2`

# Meow Anti-Xray 1.2.1 更新日志 这是一个偏服主体验与诊断能力增强的维护版本，重点是让你更容易看清当前反矿透到底在用什么配置、reload 后有没有真正生效，以及某个位置为什么会或不会被伪装。 ## 新增与改进 - `/antixray status` 现在会输出更完整的运行状态： - 全局 `enabled`、`engine-mode`、`max-block-height` - async `workerThreads`、`queueSize`、`capacity` - 当前配置文件路径 - 每个维度的 `enabled / mode / max-block-height / hidden / replacement` 计数 - `/antixray reload` 现在会在重载后返回状态摘要，并给出关键配置变化 diff。 - 如果本次重载没有带来实际运行时变化，会明确显示 `changes: no effective runtime changes` - 原 `/antixray debug` 诊断输出升级为多行 inspect 风格结果，并新增正式别名： - `/antixray inspect <world> <x> <y> <z>` - `inspect` 现在会显示： - real / fake 方块 - 是否属于 hidden / replacement / target - 是否在高度范围内 - 是否 exposed、是否 shouldReveal - 当前 `mode`、`update-radius`、权限绕过配置 - 配置兼容再补一层： - 显式空内联列表 `hidden-blocks: []` / `replacement-blocks: []` 现在会按“用户明确配置为空”处理，不再误回退到默认列表 ## 验证 - 单测通过： - `.\gradlew.bat test --tests com.meowantixray.antixray.FakeOreConfigTest --console=plain` - `.\gradlew.bat test --tests com.meowantixray.antixray.FakeOreServiceTest --console=plain` - 全量测试与双 loader 构建通过： - `.\gradlew.bat test :neoforge:test buildAllLoaders --console=plain` - 本地双 loader 命令冒烟通过： - Fabric：`status` / `reload` / `inspect` / `stop` - NeoForge：`status` / `reload` / `inspect` / `stop` ## 兼容性 - Mod ID 仍为 `meowantixray` - 配置文件仍为 `config/meowantixray.yml` - Fabric 与 NeoForge 仍然分别发布独立 jar - Minecraft 兼容范围保持 `26.1`、`26.1.1`、`26.1.2` --- # Meow Anti-Xray 1.2.1 Changelog This maintenance release focuses on server-owner visibility and diagnostics. The goal is to make it much easier to see what anti-xray settings are actually active, whether a reload changed anything, and why a specific block position is or is not being obfuscated. ## Added and Improved - `/antixray status` now reports a fuller runtime view: - global `enabled`, `engine-mode`, and `max-block-height` - async `workerThreads`, `queueSize`, and `capacity` - the active config file path - per-dimension `enabled / mode / max-block-height / hidden / replacement` counts - `/antixray reload` now returns the post-reload state summary together with a diff of important runtime config changes. - If the reload produces no effective runtime change, it explicitly reports `changes: no effective runtime changes` - The original `/antixray debug` output has been upgraded into a multi-line inspect-style diagnostic result, and a formal alias was added: - `/antixray inspect <world> <x> <y> <z>` - `inspect` now shows: - real / fake block state - whether the block is part of the hidden / replacement / target sets - whether it falls inside the configured height range - whether it is exposed and whether it should reveal - current `mode`, `update-radius`, and permission bypass settings - Config compatibility was also tightened again: - explicit empty inline lists such as `hidden-blocks: []` and `replacement-blocks: []` are now treated as intentional user config instead of silently falling back to defaults ## Verification - Targeted tests passed: - `.\gradlew.bat test --tests com.meowantixray.antixray.FakeOreConfigTest --console=plain` - `.\gradlew.bat test --tests com.meowantixray.antixray.FakeOreServiceTest --console=plain` - Full tests and dual-loader build passed: - `.\gradlew.bat test :neoforge:test buildAllLoaders --console=plain` - Local dual-loader command smoke passed: - Fabric: `status` / `reload` / `inspect` / `stop` - NeoForge: `status` / `reload` / `inspect` / `stop` ## Compatibility - Mod ID remains `meowantixray` - Config file remains `config/meowantixray.yml` - Fabric and NeoForge are still published as separate jars - Minecraft compatibility remains `26.1`, `26.1.1`, and `26.1.2`

# Meow Anti-Xray 1.2.0 更新日志 这是一个配置兼容与使用体验改进版本，重点让手写或旧版 `config/meowantixray.yml` 更稳、更容易维护。 ## 改进 - 配置解析现在支持带引号的 YAML 标量值，例如 `enabled: "false"`、`engine-mode: '3'`。 - 支持带引号的方块列表项和内联列表，例如： `hidden-blocks: ["minecraft:diamond_ore", 'minecraft:deepslate_diamond_ore']`。 - 支持带引号的维度别名，例如 `"nether":`，并继续归一化为 `minecraft:the_nether`。 - 引号内的 `#` 不再被当作注释截断，适合自定义权限节点等配置值。 - 新生成的配置文件顶部增加说明：旧配置会自动补齐新增但缺失的键，不会覆盖已有用户值。 - README 与 Modrinth 中英文简介新增 per-dimension 配置示例和旧配置兼容说明。 ## 验证 - Fabric 与 NeoForge 均完成真实 dev server `/antixray status` 和 `/antixray reload` 冒烟测试。 - 全量测试与双 loader 构建通过：`test :neoforge:test buildAllLoaders`。 ## 兼容性 - Mod ID 仍为 `meowantixray`。 - 配置文件仍为 `config/meowantixray.yml`。 - Fabric 与 NeoForge 仍然分别发布独立 jar。 - Minecraft 兼容范围保持 `26.1`、`26.1.1`、`26.1.2`。 --- # Meow Anti-Xray 1.2.0 Changelog This release improves config compatibility and day-to-day usability, especially for hand-edited or older `config/meowantixray.yml` files. ## Improved - Config parsing now accepts quoted YAML scalar values such as `enabled: "false"` and `engine-mode: '3'`. - Quoted block list entries and inline lists are supported, for example: `hidden-blocks: ["minecraft:diamond_ore", 'minecraft:deepslate_diamond_ore']`. - Quoted dimension aliases such as `"nether":` are supported and still normalize to `minecraft:the_nether`. - `#` inside quoted values is no longer treated as a comment, which helps with custom permission nodes and similar values. - Newly generated config files now explain that older configs are supplemented with missing new keys without overwriting existing user values. - README and the Modrinth descriptions now include a compact per-dimension config example and config compatibility notes. ## Verification - Fabric and NeoForge both passed real dev-server `/antixray status` and `/antixray reload` smoke tests. - Full tests and dual-loader build passed: `test :neoforge:test buildAllLoaders`. ## Compatibility - Mod ID remains `meowantixray`. - Config file remains `config/meowantixray.yml`. - Fabric and NeoForge are still published as separate jars. - Minecraft compatibility remains `26.1`, `26.1.1`, and `26.1.2`.

# Meow Anti-Xray 1.2.0 更新日志 这是一个配置兼容与使用体验改进版本，重点让手写或旧版 `config/meowantixray.yml` 更稳、更容易维护。 ## 改进 - 配置解析现在支持带引号的 YAML 标量值，例如 `enabled: "false"`、`engine-mode: '3'`。 - 支持带引号的方块列表项和内联列表，例如： `hidden-blocks: ["minecraft:diamond_ore", 'minecraft:deepslate_diamond_ore']`。 - 支持带引号的维度别名，例如 `"nether":`，并继续归一化为 `minecraft:the_nether`。 - 引号内的 `#` 不再被当作注释截断，适合自定义权限节点等配置值。 - 新生成的配置文件顶部增加说明：旧配置会自动补齐新增但缺失的键，不会覆盖已有用户值。 - README 与 Modrinth 中英文简介新增 per-dimension 配置示例和旧配置兼容说明。 ## 验证 - Fabric 与 NeoForge 均完成真实 dev server `/antixray status` 和 `/antixray reload` 冒烟测试。 - 全量测试与双 loader 构建通过：`test :neoforge:test buildAllLoaders`。 ## 兼容性 - Mod ID 仍为 `meowantixray`。 - 配置文件仍为 `config/meowantixray.yml`。 - Fabric 与 NeoForge 仍然分别发布独立 jar。 - Minecraft 兼容范围保持 `26.1`、`26.1.1`、`26.1.2`。 --- # Meow Anti-Xray 1.2.0 Changelog This release improves config compatibility and day-to-day usability, especially for hand-edited or older `config/meowantixray.yml` files. ## Improved - Config parsing now accepts quoted YAML scalar values such as `enabled: "false"` and `engine-mode: '3'`. - Quoted block list entries and inline lists are supported, for example: `hidden-blocks: ["minecraft:diamond_ore", 'minecraft:deepslate_diamond_ore']`. - Quoted dimension aliases such as `"nether":` are supported and still normalize to `minecraft:the_nether`. - `#` inside quoted values is no longer treated as a comment, which helps with custom permission nodes and similar values. - Newly generated config files now explain that older configs are supplemented with missing new keys without overwriting existing user values. - README and the Modrinth descriptions now include a compact per-dimension config example and config compatibility notes. ## Verification - Fabric and NeoForge both passed real dev-server `/antixray status` and `/antixray reload` smoke tests. - Full tests and dual-loader build passed: `test :neoforge:test buildAllLoaders`. ## Compatibility - Mod ID remains `meowantixray`. - Config file remains `config/meowantixray.yml`. - Fabric and NeoForge are still published as separate jars. - Minecraft compatibility remains `26.1`, `26.1.1`, and `26.1.2`.

# Meow Anti-Xray 1.1.1 更新日志 这是一个小修复版本，主要解决 Fabric 服务器与 Polymer 同时使用时的区块包上下文警告。 ## 修复 - 修复 Fabric + Polymer 环境下可能出现的服务端错误： `Some mod tried to create a chunk update packet, without the packet context present!` - 当检测到 Polymer 时，Meow Anti-Xray 不再提前取消原版 `sendChunk` 并自行创建区块包，而是让原版/Polymer 先创建带上下文的区块包，再在发送前执行假矿混淆。 - 非 Polymer 环境继续保留原有发送路径，避免影响现有异步区块重写和性能表现。 ## 验证 - 已使用 Polymer bundled `0.16.5+26.1.2` 进行真实客户端进服验证。 - 真实客户端进服、切换模式和加载区块后，未再出现 Polymer missing context / `IllegalStateException` 报错。 - `/antixray profile` 确认反矿透仍在处理真实客户端区块：`chunks=2778`、`rewriteTasks=2778`、rewrite avg `2.907ms`、`syncFallbackRatio=6.6%`。 ## 兼容性 - Mod ID 仍为 `meowantixray`。 - 配置文件仍为 `config/meowantixray.yml`。 - Fabric 与 NeoForge 仍然分别发布独立 jar。 - Minecraft 兼容范围保持 `26.1`、`26.1.1`、`26.1.2`。 --- # Meow Anti-Xray 1.1.1 Changelog This is a small compatibility fix for Fabric servers using Polymer. ## Fixed - Fixed a Fabric + Polymer server warning/error: `Some mod tried to create a chunk update packet, without the packet context present!` - When Polymer is detected, Meow Anti-Xray no longer cancels vanilla `sendChunk` early to create its own chunk packet. It now lets vanilla/Polymer create the packet with the proper context first, then applies fake-ore obfuscation before the packet is sent. - Non-Polymer environments keep the existing send path to avoid changing the current async chunk rewrite behavior and performance profile. ## Verification - Tested with Polymer bundled `0.16.5+26.1.2` and a real client login. - After joining, switching game modes, and loading chunks, the Polymer missing-context warning / `IllegalStateException` did not reappear. - `/antixray profile` confirmed that anti-xray rewriting still ran for the real client: `chunks=2778`, `rewriteTasks=2778`, rewrite avg `2.907ms`, `syncFallbackRatio=6.6%`. ## Compatibility - Mod ID remains `meowantixray`. - Config file remains `config/meowantixray.yml`. - Fabric and NeoForge are still published as separate jars. - Minecraft compatibility remains `26.1`, `26.1.1`, and `26.1.2`.

# Meow Anti-Xray 1.1.1 更新日志 这是一个小修复版本，主要解决 Fabric 服务器与 Polymer 同时使用时的区块包上下文警告。 ## 修复 - 修复 Fabric + Polymer 环境下可能出现的服务端错误： `Some mod tried to create a chunk update packet, without the packet context present!` - 当检测到 Polymer 时，Meow Anti-Xray 不再提前取消原版 `sendChunk` 并自行创建区块包，而是让原版/Polymer 先创建带上下文的区块包，再在发送前执行假矿混淆。 - 非 Polymer 环境继续保留原有发送路径，避免影响现有异步区块重写和性能表现。 ## 验证 - 已使用 Polymer bundled `0.16.5+26.1.2` 进行真实客户端进服验证。 - 真实客户端进服、切换模式和加载区块后，未再出现 Polymer missing context / `IllegalStateException` 报错。 - `/antixray profile` 确认反矿透仍在处理真实客户端区块：`chunks=2778`、`rewriteTasks=2778`、rewrite avg `2.907ms`、`syncFallbackRatio=6.6%`。 ## 兼容性 - Mod ID 仍为 `meowantixray`。 - 配置文件仍为 `config/meowantixray.yml`。 - Fabric 与 NeoForge 仍然分别发布独立 jar。 - Minecraft 兼容范围保持 `26.1`、`26.1.1`、`26.1.2`。 --- # Meow Anti-Xray 1.1.1 Changelog This is a small compatibility fix for Fabric servers using Polymer. ## Fixed - Fixed a Fabric + Polymer server warning/error: `Some mod tried to create a chunk update packet, without the packet context present!` - When Polymer is detected, Meow Anti-Xray no longer cancels vanilla `sendChunk` early to create its own chunk packet. It now lets vanilla/Polymer create the packet with the proper context first, then applies fake-ore obfuscation before the packet is sent. - Non-Polymer environments keep the existing send path to avoid changing the current async chunk rewrite behavior and performance profile. ## Verification - Tested with Polymer bundled `0.16.5+26.1.2` and a real client login. - After joining, switching game modes, and loading chunks, the Polymer missing-context warning / `IllegalStateException` did not reappear. - `/antixray profile` confirmed that anti-xray rewriting still ran for the real client: `chunks=2778`, `rewriteTasks=2778`, rewrite avg `2.907ms`, `syncFallbackRatio=6.6%`. ## Compatibility - Mod ID remains `meowantixray`. - Config file remains `config/meowantixray.yml`. - Fabric and NeoForge are still published as separate jars. - Minecraft compatibility remains `26.1`, `26.1.1`, and `26.1.2`.

# Meow Anti-Xray 1.1.0 更新日志 这是一个中版本更新，重点不是单纯改包名，而是继续把 Meow Anti-Xray 做成独立、可压测、可诊断的假矿反矿透模组。服主最关心的假矿目标、跑图压力和双 loader 稳定性，这次都做了对应验证。 ## 反矿透效果 - 对齐 Paper anti-xray 的实际混淆目标：mode 1 只处理 hidden blocks，mode 2 / mode 3 会把 replacement blocks 纳入混淆目标。 - 修正目标判断后，关闭 replacement pass 或使用 mode 1 时不会再对 replacement blocks 做无效 reveal / blockChanged 候选检查。 - 保留本项目默认额外保护的下界矿物：`ancient_debris`、`nether_quartz_ore`、`nether_gold_ore`。 ## 性能与诊断 - 区块重写流程复用静态 pass 数组，减少每个 chunk 重写时的小对象分配。 - `/antixray profile` 新增 `pressure=` 与 `syncFallbackRatio=`，服主可以直接看到异步队列是否被跑图压满，以及有多少区块发送回退到了同步重写。 - 默认 `async-queue-size=16` 仍然以防 OOM 为优先；如果服务器内存更充足，可以继续按实际压测把队列调到 32 或 64 换更高吞吐。 ## 启动与压测验证 | Loader | 启动 | 8 客户端压测 | `/antixray profile` | spark | | --- | --- | --- | --- | --- | | Fabric | `meowantixray 1.1.0` 启动到 `Done`，更新检查正常 | 91s，8/8 在线，28766 chunks，316.01 chunks/s，0 errors | rewrite avg 2.662ms，max 33.198ms，syncFallbackRatio 43.0% | https://spark.lucko.me/A9EOkRRmFJ | | NeoForge | `meowantixray 1.1.0` 启动到 `Done`，更新检查正常 | 91s，8/8 在线，29699 chunks，326.29 chunks/s，0 errors | rewrite avg 2.893ms，max 42.202ms，syncFallbackRatio 38.2% | https://spark.lucko.me/emnV8jJ4yG | 说明：上面的压测使用本仓库的 Minecraft 26.1.2 网络假玩家工具，通过 RCON 持续传送制造区块发送压力。`pressure=saturated` 在这类压测下是预期信号，表示背压机制正在限制异步任务堆积。 ## 项目身份清理 - Java 包名从 `com.meowconsole` 迁移到 `com.meowantixray`。 - Fabric 入口类迁移为 `com.meowantixray.fabric.MeowAntiXrayFabricMod`。 - NeoForge 入口类迁移为 `com.meowantixray.neoforge.MeowAntiXrayNeoForgeMod`。 - Mixin plugin 与 mixin 包名同步迁移到 `com.meowantixray.mixin`。 - 运行时日志、命令类和平台桥接中的旧 MeowConsole 命名残留已清理。 ## 兼容性 - Mod ID 保持 `meowantixray` 不变。 - 配置文件仍为 `config/meowantixray.yml`，升级不需要重新生成配置。 - 默认配置路径、命令和假矿策略保持兼容。 - Fabric 与 NeoForge 仍然分别发布独立 jar，请继续按服务器 loader 下载对应文件。 - Minecraft 兼容范围保持 `26.1`、`26.1.1`、`26.1.2`。 --- # Meow Anti-Xray 1.1.0 Changelog This minor release is not just an internal package rename. It continues the work of making Meow Anti-Xray a standalone fake-ore anti-xray mod with clear behavior, measurable performance, and verified Fabric / NeoForge stability. ## Anti-Xray Behavior - Aligned the obfuscation target lookup with Paper anti-xray behavior: mode 1 targets hidden blocks only, while mode 2 / mode 3 also include replacement blocks. - Avoided unnecessary reveal / blockChanged candidate checks for replacement blocks when replacement passes are disabled or mode 1 is used. - Kept this mod's additional Nether protection defaults: `ancient_debris`, `nether_quartz_ore`, and `nether_gold_ore`. ## Performance And Diagnostics - Reused static rewrite pass arrays to reduce small per-chunk allocations in the hot rewrite path. - Added `pressure=` and `syncFallbackRatio=` to `/antixray profile`, so server owners can see whether async rewriting is saturated and how often chunk sends fall back to synchronous rewriting. - Kept the default `async-queue-size=16` conservative to prevent OOM under heavy travel. Servers with more memory can still raise it to 32 or 64 after their own profiling. ## Startup And Profiling Verification | Loader | Startup | 8-client load run | `/antixray profile` | spark | | --- | --- | --- | --- | --- | | Fabric | `meowantixray 1.1.0` reached `Done`; update check passed | 91s, 8/8 online, 28766 chunks, 316.01 chunks/s, 0 errors | rewrite avg 2.662ms, max 33.198ms, syncFallbackRatio 43.0% | https://spark.lucko.me/A9EOkRRmFJ | | NeoForge | `meowantixray 1.1.0` reached `Done`; update check passed | 91s, 8/8 online, 29699 chunks, 326.29 chunks/s, 0 errors | rewrite avg 2.893ms, max 42.202ms, syncFallbackRatio 38.2% | https://spark.lucko.me/emnV8jJ4yG | The load runs used this repository's Minecraft 26.1.2 network fake-player runner with RCON teleports to generate sustained chunk-send pressure. Seeing `pressure=saturated` during this synthetic run is expected; it means the backpressure guard is actively preventing unbounded async task buildup. ## Project Identity Cleanup - Migrated Java packages from `com.meowconsole` to `com.meowantixray`. - Migrated the Fabric entrypoint to `com.meowantixray.fabric.MeowAntiXrayFabricMod`. - Migrated the NeoForge entrypoint to `com.meowantixray.neoforge.MeowAntiXrayNeoForgeMod`. - Migrated the mixin plugin and mixin package to `com.meowantixray.mixin`. - Cleaned up old MeowConsole naming from runtime logs, command classes, and platform bridge code. ## Compatibility - Mod ID remains `meowantixray`. - Config file remains `config/meowantixray.yml`; upgrading does not require regenerating your config. - Default config path, commands, and fake-ore strategy remain compatible. - Fabric and NeoForge are still published as separate jars. Please keep downloading the file that matches your server loader. - Minecraft compatibility remains `26.1`, `26.1.1`, and `26.1.2`.

# Meow Anti-Xray 1.1.0 更新日志 这是一个中版本更新，重点不是单纯改包名，而是继续把 Meow Anti-Xray 做成独立、可压测、可诊断的假矿反矿透模组。服主最关心的假矿目标、跑图压力和双 loader 稳定性，这次都做了对应验证。 ## 反矿透效果 - 对齐 Paper anti-xray 的实际混淆目标：mode 1 只处理 hidden blocks，mode 2 / mode 3 会把 replacement blocks 纳入混淆目标。 - 修正目标判断后，关闭 replacement pass 或使用 mode 1 时不会再对 replacement blocks 做无效 reveal / blockChanged 候选检查。 - 保留本项目默认额外保护的下界矿物：`ancient_debris`、`nether_quartz_ore`、`nether_gold_ore`。 ## 性能与诊断 - 区块重写流程复用静态 pass 数组，减少每个 chunk 重写时的小对象分配。 - `/antixray profile` 新增 `pressure=` 与 `syncFallbackRatio=`，服主可以直接看到异步队列是否被跑图压满，以及有多少区块发送回退到了同步重写。 - 默认 `async-queue-size=16` 仍然以防 OOM 为优先；如果服务器内存更充足，可以继续按实际压测把队列调到 32 或 64 换更高吞吐。 ## 启动与压测验证 | Loader | 启动 | 8 客户端压测 | `/antixray profile` | spark | | --- | --- | --- | --- | --- | | Fabric | `meowantixray 1.1.0` 启动到 `Done`，更新检查正常 | 91s，8/8 在线，28766 chunks，316.01 chunks/s，0 errors | rewrite avg 2.662ms，max 33.198ms，syncFallbackRatio 43.0% | https://spark.lucko.me/A9EOkRRmFJ | | NeoForge | `meowantixray 1.1.0` 启动到 `Done`，更新检查正常 | 91s，8/8 在线，29699 chunks，326.29 chunks/s，0 errors | rewrite avg 2.893ms，max 42.202ms，syncFallbackRatio 38.2% | https://spark.lucko.me/emnV8jJ4yG | 说明：上面的压测使用本仓库的 Minecraft 26.1.2 网络假玩家工具，通过 RCON 持续传送制造区块发送压力。`pressure=saturated` 在这类压测下是预期信号，表示背压机制正在限制异步任务堆积。 ## 项目身份清理 - Java 包名从 `com.meowconsole` 迁移到 `com.meowantixray`。 - Fabric 入口类迁移为 `com.meowantixray.fabric.MeowAntiXrayFabricMod`。 - NeoForge 入口类迁移为 `com.meowantixray.neoforge.MeowAntiXrayNeoForgeMod`。 - Mixin plugin 与 mixin 包名同步迁移到 `com.meowantixray.mixin`。 - 运行时日志、命令类和平台桥接中的旧 MeowConsole 命名残留已清理。 ## 兼容性 - Mod ID 保持 `meowantixray` 不变。 - 配置文件仍为 `config/meowantixray.yml`，升级不需要重新生成配置。 - 默认配置路径、命令和假矿策略保持兼容。 - Fabric 与 NeoForge 仍然分别发布独立 jar，请继续按服务器 loader 下载对应文件。 - Minecraft 兼容范围保持 `26.1`、`26.1.1`、`26.1.2`。 --- # Meow Anti-Xray 1.1.0 Changelog This minor release is not just an internal package rename. It continues the work of making Meow Anti-Xray a standalone fake-ore anti-xray mod with clear behavior, measurable performance, and verified Fabric / NeoForge stability. ## Anti-Xray Behavior - Aligned the obfuscation target lookup with Paper anti-xray behavior: mode 1 targets hidden blocks only, while mode 2 / mode 3 also include replacement blocks. - Avoided unnecessary reveal / blockChanged candidate checks for replacement blocks when replacement passes are disabled or mode 1 is used. - Kept this mod's additional Nether protection defaults: `ancient_debris`, `nether_quartz_ore`, and `nether_gold_ore`. ## Performance And Diagnostics - Reused static rewrite pass arrays to reduce small per-chunk allocations in the hot rewrite path. - Added `pressure=` and `syncFallbackRatio=` to `/antixray profile`, so server owners can see whether async rewriting is saturated and how often chunk sends fall back to synchronous rewriting. - Kept the default `async-queue-size=16` conservative to prevent OOM under heavy travel. Servers with more memory can still raise it to 32 or 64 after their own profiling. ## Startup And Profiling Verification | Loader | Startup | 8-client load run | `/antixray profile` | spark | | --- | --- | --- | --- | --- | | Fabric | `meowantixray 1.1.0` reached `Done`; update check passed | 91s, 8/8 online, 28766 chunks, 316.01 chunks/s, 0 errors | rewrite avg 2.662ms, max 33.198ms, syncFallbackRatio 43.0% | https://spark.lucko.me/A9EOkRRmFJ | | NeoForge | `meowantixray 1.1.0` reached `Done`; update check passed | 91s, 8/8 online, 29699 chunks, 326.29 chunks/s, 0 errors | rewrite avg 2.893ms, max 42.202ms, syncFallbackRatio 38.2% | https://spark.lucko.me/emnV8jJ4yG | The load runs used this repository's Minecraft 26.1.2 network fake-player runner with RCON teleports to generate sustained chunk-send pressure. Seeing `pressure=saturated` during this synthetic run is expected; it means the backpressure guard is actively preventing unbounded async task buildup. ## Project Identity Cleanup - Migrated Java packages from `com.meowconsole` to `com.meowantixray`. - Migrated the Fabric entrypoint to `com.meowantixray.fabric.MeowAntiXrayFabricMod`. - Migrated the NeoForge entrypoint to `com.meowantixray.neoforge.MeowAntiXrayNeoForgeMod`. - Migrated the mixin plugin and mixin package to `com.meowantixray.mixin`. - Cleaned up old MeowConsole naming from runtime logs, command classes, and platform bridge code. ## Compatibility - Mod ID remains `meowantixray`. - Config file remains `config/meowantixray.yml`; upgrading does not require regenerating your config. - Default config path, commands, and fake-ore strategy remain compatible. - Fabric and NeoForge are still published as separate jars. Please keep downloading the file that matches your server loader. - Minecraft compatibility remains `26.1`, `26.1.1`, and `26.1.2`.

# Meow Anti-Xray 1.0.2 更新日志 这是一个稳定修复版本，重点修复 Fabric 端区块包重写在真实 local palette 场景下的崩溃，并进一步对齐 Paper Anti-Xray 的 engine mode 1 行为。 ## 修复 - 修复 Fabric 端玩家加载区块时可能出现的 `MissingPaletteEntryException` 崩溃。 - 修正 local palette 读取逻辑：实时读取 `LevelChunkSection` 时现在使用真实 palette 大小，而不是 4096 个区块内方块索引数量。 - 修正 engine mode 1 / HIDE 的自然替换规则：主世界按高度选择 `stone` / `deepslate`，下界使用 `netherrack`，末地使用 `end_stone`，更贴近 Paper 行为。 ## 验证 - 新增 local palette 回归测试，覆盖 Fabric 崩溃路径。 - 新增 engine mode 1 自然替换 golden case 测试。 - Fabric 8 个假网络玩家 RCON spectator 跑图 91 秒通过：`15833` chunks，约 `173.94 chunks/s`，客户端错误 `0`。 - Fabric 与 NeoForge 单元测试通过。 - Fabric 与 NeoForge 双 loader 构建通过。 --- # Meow Anti-Xray 1.0.2 Changelog This is a stability release focused on fixing a Fabric chunk rewrite crash in real local-palette sections and tightening Paper Anti-Xray engine mode 1 parity. ## Fixes - Fixed a Fabric crash that could happen while players were loading chunks: `MissingPaletteEntryException`. - Fixed live `LevelChunkSection` local palette reads to use the real palette size instead of the 4096 block-index count. - Aligned engine mode 1 / HIDE natural replacements more closely with Paper: Overworld sections use `stone` or `deepslate` by height, Nether uses `netherrack`, and End uses `end_stone`. ## Verification - Added a local palette regression test for the Fabric crash path. - Added engine mode 1 natural replacement golden case tests. - Fabric 8 fake network players completed a 91-second RCON spectator exploration run: `15833` chunks, about `173.94 chunks/s`, `0` client errors. - Fabric and NeoForge unit tests passed. - Fabric and NeoForge dual-loader build passed.

# Meow Anti-Xray 1.0.2 更新日志 这是一个稳定修复版本，重点修复 Fabric 端区块包重写在真实 local palette 场景下的崩溃，并进一步对齐 Paper Anti-Xray 的 engine mode 1 行为。 ## 修复 - 修复 Fabric 端玩家加载区块时可能出现的 `MissingPaletteEntryException` 崩溃。 - 修正 local palette 读取逻辑：实时读取 `LevelChunkSection` 时现在使用真实 palette 大小，而不是 4096 个区块内方块索引数量。 - 修正 engine mode 1 / HIDE 的自然替换规则：主世界按高度选择 `stone` / `deepslate`，下界使用 `netherrack`，末地使用 `end_stone`，更贴近 Paper 行为。 ## 验证 - 新增 local palette 回归测试，覆盖 Fabric 崩溃路径。 - 新增 engine mode 1 自然替换 golden case 测试。 - Fabric 8 个假网络玩家 RCON spectator 跑图 91 秒通过：`15833` chunks，约 `173.94 chunks/s`，客户端错误 `0`。 - Fabric 与 NeoForge 单元测试通过。 - Fabric 与 NeoForge 双 loader 构建通过。 --- # Meow Anti-Xray 1.0.2 Changelog This is a stability release focused on fixing a Fabric chunk rewrite crash in real local-palette sections and tightening Paper Anti-Xray engine mode 1 parity. ## Fixes - Fixed a Fabric crash that could happen while players were loading chunks: `MissingPaletteEntryException`. - Fixed live `LevelChunkSection` local palette reads to use the real palette size instead of the 4096 block-index count. - Aligned engine mode 1 / HIDE natural replacements more closely with Paper: Overworld sections use `stone` or `deepslate` by height, Nether uses `netherrack`, and End uses `end_stone`. ## Verification - Added a local palette regression test for the Fabric crash path. - Added engine mode 1 natural replacement golden case tests. - Fabric 8 fake network players completed a 91-second RCON spectator exploration run: `15833` chunks, about `173.94 chunks/s`, `0` client errors. - Fabric and NeoForge unit tests passed. - Fabric and NeoForge dual-loader build passed.

# Meow Anti-Xray 1.0.1 Changelog This is a maintenance release focused on clearer runtime diagnostics for server owners. ## Improvements - `/antixray status` now shows the active loader, mod version, and Minecraft version. - `/antixray profile` now reports async rewrite enablement, worker count, queue size, total capacity, in-flight count, and available permits. - `/antixray profile` now tracks sync chunk sends and sync send rate, making async backpressure fallback easier to spot. - Local `.playwright-cli/` test cache is now ignored so it does not pollute the working tree. ## Verification - Fabric and NeoForge unit tests passed. - Fabric and NeoForge dual-loader build passed. --- # Meow Anti-Xray 1.0.1 更新日志 这是一个稳定维护版本，重点是让服主更容易确认当前运行环境和反矿透异步重写压力。 ## 改进 - `/antixray status` 现在会显示当前 loader、模组版本和 Minecraft 版本。 - `/antixray profile` 现在会显示异步重写是否启用、worker 数量、队列大小、总容量、当前 in-flight 数量和可用 permit 数。 - `/antixray profile` 现在会统计同步 chunk send 次数和速率，便于判断是否频繁触发异步背压 fallback。 - 本地开发缓存 `.playwright-cli/` 已加入 `.gitignore`，避免测试缓存污染工作区状态。 ## 验证 - Fabric 与 NeoForge 单元测试通过。 - Fabric 与 NeoForge 双 loader 构建通过。

# Meow Anti-Xray 1.0.1 Changelog This is a maintenance release focused on clearer runtime diagnostics for server owners. ## Improvements - `/antixray status` now shows the active loader, mod version, and Minecraft version. - `/antixray profile` now reports async rewrite enablement, worker count, queue size, total capacity, in-flight count, and available permits. - `/antixray profile` now tracks sync chunk sends and sync send rate, making async backpressure fallback easier to spot. - Local `.playwright-cli/` test cache is now ignored so it does not pollute the working tree. ## Verification - Fabric and NeoForge unit tests passed. - Fabric and NeoForge dual-loader build passed. --- # Meow Anti-Xray 1.0.1 更新日志 这是一个稳定维护版本，重点是让服主更容易确认当前运行环境和反矿透异步重写压力。 ## 改进 - `/antixray status` 现在会显示当前 loader、模组版本和 Minecraft 版本。 - `/antixray profile` 现在会显示异步重写是否启用、worker 数量、队列大小、总容量、当前 in-flight 数量和可用 permit 数。 - `/antixray profile` 现在会统计同步 chunk send 次数和速率，便于判断是否频繁触发异步背压 fallback。 - 本地开发缓存 `.playwright-cli/` 已加入 `.gitignore`，避免测试缓存污染工作区状态。 ## 验证 - Fabric 与 NeoForge 单元测试通过。 - Fabric 与 NeoForge 双 loader 构建通过。

# Meow Anti-Xray 1.0.0 更新日志 🚀 **高性能独立反矿透：从 MeowConsole 拆分，后续由本项目持续维护** `Meow Anti-Xray` 是从 [MeowConsole](https://modrinth.com/mod/meowconsole) 拆分出来的独立服务端反矿透 Mod。MeowConsole 新版本将不再继续维护内置反矿透功能，后续反矿透更新、性能优化、版本适配与问题修复都会集中在本项目进行。 相比继续把反矿透塞在综合服务器工具里，本项目只保留矿物隐藏、区块包重写、权限绕过、配置热重载和性能诊断等必要能力，目标是给 Fabric / NeoForge 服务器提供一个更轻、更专注、更接近 Paper Anti-Xray 体验的方案。 ## 本次亮点 - 🧭 **进一步对齐 Paper Anti-Xray**：同步 Paper 风格的默认隐藏方块、替换方块、邻近刷新逻辑和 `paper.antixray.bypass` 权限节点。 - 🏎️ **性能优先的独立实现**：移除 MeowConsole 中与反矿透无关的控制台、睡眠、玩家消息等功能，减少加载面和运行期干扰，让反矿透逻辑更容易被 profiling、调优和长期维护。 - 🪨 **更安全的假矿候选**：箱子、末影箱等方块实体不会再作为 mode 2 假矿候选，降低客户端显示异常和交互误导风险。 - 🔐 **权限绕过更完整**：新增/完善 `bypass-permission` 配置。开启 `use-permission` 后，Fabric / NeoForge 会尽量桥接对应权限 API；没有权限 API 时仍回退到 OP/管理员判断。 - ⚡ **异步区块包重写优化**：继续支持后台线程处理区块包重写，降低玩家跑图、传送、加载新区块时对主线程的压力。 - 🧯 **新增异步队列背压**：加入 `async-queue-size`，默认 `16`。在高压跑图或多人加载新区块时限制后台任务堆积，避免大量区块快照排队造成内存暴涨或 Java heap OOM。 - 📊 **真实跑图与高压压测验证**：已用 spark 对真实 Fabric 单人跑图采样，TPS 稳定 `20.00`，MSPT 中位数 `3.31ms`，`meowantixray` 在 server thread mods 视图占比约 `3.55%`。同时新增 Minecraft `26.1.2` 网络假玩家压测工具，可模拟真实玩家登录、接收区块包、回 keepalive、回 chunk batch ack，并通过 RCON 跑图触发真实区块加载。 - 🧪 **8 假玩家高压测试通过**：修复前 8 个网络假玩家持续传送跑图会触发 OOM；修复后 90 秒压测稳定完成，0 客户端错误。保守默认队列下仍能完成约 3.6 万次区块接收，说明本项目更适合承接后续反矿透性能优化。 - 🔌 **Fabric / NeoForge 行为保持一致**：反矿透核心仍由两个 loader 共享，配置、权限、Paper 对齐逻辑和性能策略保持同步。 - 🛠️ **新增调试/压测能力**：保留 `/antixray profile`，并加入面向开发和排障的 `/antixray stress`，方便服主或开发者定位反矿透重写成本。 ## 配置变化 新增配置项： ```yml anti-xray: async-chunk-rewrite: true async-worker-threads: 1 async-queue-size: 16 ``` `async-queue-size` 用来控制异步重写任务最多排队多少个。默认 `16` 更偏向防止内存堆积。如果你的服务器内存充足，并且希望提高多人跑图吞吐，可以尝试 `32` 或 `64`。 ## 使用方法 1. 下载与你服务器 loader 匹配的文件： - Fabric：`meowantixray-fabric-1.0.0.jar` - NeoForge：`meowantixray-neoforge-1.0.0.jar` 2. 放入服务端 `mods` 文件夹。 3. 启动服务器，配置会生成在： ```text config/meowantixray.yml ``` 4. 常用命令： - `/antixray status` 查看状态和更新检查结果 - `/antixray reload` 重载配置 - `/antixray profile` 查看重写次数和耗时 - `/antixray debug <world> <x> <y> <z>` 排查指定方块是否会被隐藏 ## 关于预生成地图和网页地图 - 🗺️ 预生成地图、预加载区块不会绕过本 Mod。Meow Anti-Xray 在“区块发送给玩家客户端”时生效，而不是在服务端生成区块时生效。 - 🧭 Dynmap / BlueMap 等网页地图如果直接读取服务端真实区块数据，不属于玩家客户端区块包，本 Mod 不会替它们隐藏矿物。请单独配置对应地图插件/Mod 的隐藏规则。 ## 未来规划 - 🔍 持续跟进 Paper Anti-Xray 的默认配置和行为差异。 - 📉 继续降低区块包重写时的内存分配和 GC 压力。 - 🧪 增强压测工具和 profiling 指标，让服主更容易判断配置是否适合自己的服务器。 - 🌐 继续保持 Fabric / NeoForge 双 loader 支持，并关注 Minecraft 新版本协议变化。 - 🧭 承接 MeowConsole 后续不再维护的反矿透能力，后续兼容性修复、新版本适配和性能优化都将在本项目发布。 ## 给 MeowConsole 用户 - 🐾 如果你需要反矿透，请迁移到 `Meow Anti-Xray`；这是后续反矿透功能的正式维护项目。 - 🧩 MeowConsole 新版本将专注其它服务器辅助能力，不再继续内置和维护反矿透。 --- # Meow Anti-Xray 1.0.0 Changelog 🚀 **High-performance standalone anti-xray, split from MeowConsole** `Meow Anti-Xray` is a standalone server-side anti-xray mod split from [MeowConsole](https://modrinth.com/mod/meowconsole). Future MeowConsole versions will no longer maintain the built-in anti-xray feature. Anti-xray updates, performance work, Minecraft version support, and bug fixes will continue in this project. Instead of keeping anti-xray inside a general-purpose server utility mod, this project focuses only on ore hiding, chunk packet rewriting, permission bypasses, hot reloads, and diagnostics. The goal is to provide Fabric and NeoForge servers with a lighter, more focused, Paper-like anti-xray experience. ## Highlights - 🧭 **Closer Paper Anti-Xray parity**: Updated Paper-style hidden blocks, replacement blocks, neighbor reveal behavior, and the default `paper.antixray.bypass` permission node. - 🏎️ **Performance-first standalone design**: Removes unrelated MeowConsole console, sleep, player-message, and helper features so the anti-xray path is easier to profile, tune, and maintain. - 🪨 **Safer decoy selection**: Block entities such as chests and ender chests are excluded from mode 2 decoys, reducing client-side display and interaction surprises. - 🔐 **Better permission bypass support**: Added/improved `bypass-permission`. When `use-permission` is enabled, Fabric and NeoForge permission APIs are bridged when available, with OP/admin fallback. - ⚡ **Async chunk packet rewriting**: Keeps rewrite work off the main thread where possible, reducing pressure while players explore, teleport, or load new chunks. - 🧯 **New async backpressure**: Adds `async-queue-size`, defaulting to `16`, to prevent queued rewrite snapshots from growing without bounds during heavy chunk loading. - 📊 **Real exploration and stress-test verified**: A real Fabric spark run with one player held `20.00` TPS, with median MSPT `3.31ms`; `meowantixray` accounted for about `3.55%` in the server-thread mods view. The project also includes a Minecraft `26.1.2` network fake-player runner that logs in like a real client, receives chunk packets, replies to keepalive and chunk batch packets, and can use RCON teleports to load real terrain. - 🧪 **8 fake-player stress test passed**: Before the fix, 8 network fake players repeatedly teleporting and loading chunks could trigger Java heap OOM. After the fix, a 90-second stress run completed with 0 client errors. With the conservative default queue, the run still completed about 36k chunk receives, making this project a better home for future anti-xray performance work. - 🔌 **Fabric / NeoForge behavior alignment**: The anti-xray core remains shared across both loaders, keeping config, permissions, Paper parity behavior, and performance strategy consistent. - 🛠️ **More diagnostics**: `/antixray profile` remains available, and `/antixray stress` helps server owners and developers inspect rewrite cost during troubleshooting. ## Config Changes New config option: ```yml anti-xray: async-chunk-rewrite: true async-worker-threads: 1 async-queue-size: 16 ``` `async-queue-size` controls how many async rewrite tasks may wait in the queue. The default `16` favors memory safety. If your server has more memory and you want higher exploration throughput, try `32` or `64`. ## How to Use 1. Download the file matching your server loader: - Fabric: `meowantixray-fabric-1.0.0.jar` - NeoForge: `meowantixray-neoforge-1.0.0.jar` 2. Put it into the server `mods` folder. 3. Start the server. The config is generated at: ```text config/meowantixray.yml ``` 4. Useful commands: - `/antixray status` shows status and update-check results - `/antixray reload` reloads the config - `/antixray profile` shows rewrite counts and timing metrics - `/antixray debug <world> <x> <y> <z>` checks whether a specific block would be hidden ## Pregenerated Worlds and Web Maps - 🗺️ Pregeneration and chunk preloading do not bypass this mod. Meow Anti-Xray applies when chunk packets are sent to player clients, not when chunks are generated server-side. - 🧭 Web map renderers such as Dynmap or BlueMap may read real server chunk data directly. Those are not player chunk packets, so configure hiding rules in the map plugin/mod separately. ## Roadmap - 🔍 Continue tracking Paper Anti-Xray defaults and behavior. - 📉 Further reduce memory allocation and GC pressure during chunk packet rewriting. - 🧪 Improve stress testing and profiling output so server owners can tune config more confidently. - 🌐 Keep Fabric / NeoForge support aligned while tracking Minecraft protocol changes. - 🧭 Carry forward the anti-xray feature that newer MeowConsole versions will no longer maintain. Compatibility fixes, version updates, and performance improvements will be released here. ## For MeowConsole Users - 🐾 If you need anti-xray protection, migrate to `Meow Anti-Xray`; this is the official maintained home for that feature going forward. - 🧩 Newer MeowConsole versions will focus on other server helper features and will no longer include or maintain anti-xray.

# Meow Anti-Xray 1.0.0 更新日志 🚀 **高性能独立反矿透：从 MeowConsole 拆分，后续由本项目持续维护** `Meow Anti-Xray` 是从 [MeowConsole](https://modrinth.com/mod/meowconsole) 拆分出来的独立服务端反矿透 Mod。MeowConsole 新版本将不再继续维护内置反矿透功能，后续反矿透更新、性能优化、版本适配与问题修复都会集中在本项目进行。 相比继续把反矿透塞在综合服务器工具里，本项目只保留矿物隐藏、区块包重写、权限绕过、配置热重载和性能诊断等必要能力，目标是给 Fabric / NeoForge 服务器提供一个更轻、更专注、更接近 Paper Anti-Xray 体验的方案。 ## 本次亮点 - 🧭 **进一步对齐 Paper Anti-Xray**：同步 Paper 风格的默认隐藏方块、替换方块、邻近刷新逻辑和 `paper.antixray.bypass` 权限节点。 - 🏎️ **性能优先的独立实现**：移除 MeowConsole 中与反矿透无关的控制台、睡眠、玩家消息等功能，减少加载面和运行期干扰，让反矿透逻辑更容易被 profiling、调优和长期维护。 - 🪨 **更安全的假矿候选**：箱子、末影箱等方块实体不会再作为 mode 2 假矿候选，降低客户端显示异常和交互误导风险。 - 🔐 **权限绕过更完整**：新增/完善 `bypass-permission` 配置。开启 `use-permission` 后，Fabric / NeoForge 会尽量桥接对应权限 API；没有权限 API 时仍回退到 OP/管理员判断。 - ⚡ **异步区块包重写优化**：继续支持后台线程处理区块包重写，降低玩家跑图、传送、加载新区块时对主线程的压力。 - 🧯 **新增异步队列背压**：加入 `async-queue-size`，默认 `16`。在高压跑图或多人加载新区块时限制后台任务堆积，避免大量区块快照排队造成内存暴涨或 Java heap OOM。 - 📊 **真实跑图与高压压测验证**：已用 spark 对真实 Fabric 单人跑图采样，TPS 稳定 `20.00`，MSPT 中位数 `3.31ms`，`meowantixray` 在 server thread mods 视图占比约 `3.55%`。同时新增 Minecraft `26.1.2` 网络假玩家压测工具，可模拟真实玩家登录、接收区块包、回 keepalive、回 chunk batch ack，并通过 RCON 跑图触发真实区块加载。 - 🧪 **8 假玩家高压测试通过**：修复前 8 个网络假玩家持续传送跑图会触发 OOM；修复后 90 秒压测稳定完成，0 客户端错误。保守默认队列下仍能完成约 3.6 万次区块接收，说明本项目更适合承接后续反矿透性能优化。 - 🔌 **Fabric / NeoForge 行为保持一致**：反矿透核心仍由两个 loader 共享，配置、权限、Paper 对齐逻辑和性能策略保持同步。 - 🛠️ **新增调试/压测能力**：保留 `/antixray profile`，并加入面向开发和排障的 `/antixray stress`，方便服主或开发者定位反矿透重写成本。 ## 配置变化 新增配置项： ```yml anti-xray: async-chunk-rewrite: true async-worker-threads: 1 async-queue-size: 16 ``` `async-queue-size` 用来控制异步重写任务最多排队多少个。默认 `16` 更偏向防止内存堆积。如果你的服务器内存充足，并且希望提高多人跑图吞吐，可以尝试 `32` 或 `64`。 ## 使用方法 1. 下载与你服务器 loader 匹配的文件： - Fabric：`meowantixray-fabric-1.0.0.jar` - NeoForge：`meowantixray-neoforge-1.0.0.jar` 2. 放入服务端 `mods` 文件夹。 3. 启动服务器，配置会生成在： ```text config/meowantixray.yml ``` 4. 常用命令： - `/antixray status` 查看状态和更新检查结果 - `/antixray reload` 重载配置 - `/antixray profile` 查看重写次数和耗时 - `/antixray debug <world> <x> <y> <z>` 排查指定方块是否会被隐藏 ## 关于预生成地图和网页地图 - 🗺️ 预生成地图、预加载区块不会绕过本 Mod。Meow Anti-Xray 在“区块发送给玩家客户端”时生效，而不是在服务端生成区块时生效。 - 🧭 Dynmap / BlueMap 等网页地图如果直接读取服务端真实区块数据，不属于玩家客户端区块包，本 Mod 不会替它们隐藏矿物。请单独配置对应地图插件/Mod 的隐藏规则。 ## 未来规划 - 🔍 持续跟进 Paper Anti-Xray 的默认配置和行为差异。 - 📉 继续降低区块包重写时的内存分配和 GC 压力。 - 🧪 增强压测工具和 profiling 指标，让服主更容易判断配置是否适合自己的服务器。 - 🌐 继续保持 Fabric / NeoForge 双 loader 支持，并关注 Minecraft 新版本协议变化。 - 🧭 承接 MeowConsole 后续不再维护的反矿透能力，后续兼容性修复、新版本适配和性能优化都将在本项目发布。 ## 给 MeowConsole 用户 - 🐾 如果你需要反矿透，请迁移到 `Meow Anti-Xray`；这是后续反矿透功能的正式维护项目。 - 🧩 MeowConsole 新版本将专注其它服务器辅助能力，不再继续内置和维护反矿透。 --- # Meow Anti-Xray 1.0.0 Changelog 🚀 **High-performance standalone anti-xray, split from MeowConsole** `Meow Anti-Xray` is a standalone server-side anti-xray mod split from [MeowConsole](https://modrinth.com/mod/meowconsole). Future MeowConsole versions will no longer maintain the built-in anti-xray feature. Anti-xray updates, performance work, Minecraft version support, and bug fixes will continue in this project. Instead of keeping anti-xray inside a general-purpose server utility mod, this project focuses only on ore hiding, chunk packet rewriting, permission bypasses, hot reloads, and diagnostics. The goal is to provide Fabric and NeoForge servers with a lighter, more focused, Paper-like anti-xray experience. ## Highlights - 🧭 **Closer Paper Anti-Xray parity**: Updated Paper-style hidden blocks, replacement blocks, neighbor reveal behavior, and the default `paper.antixray.bypass` permission node. - 🏎️ **Performance-first standalone design**: Removes unrelated MeowConsole console, sleep, player-message, and helper features so the anti-xray path is easier to profile, tune, and maintain. - 🪨 **Safer decoy selection**: Block entities such as chests and ender chests are excluded from mode 2 decoys, reducing client-side display and interaction surprises. - 🔐 **Better permission bypass support**: Added/improved `bypass-permission`. When `use-permission` is enabled, Fabric and NeoForge permission APIs are bridged when available, with OP/admin fallback. - ⚡ **Async chunk packet rewriting**: Keeps rewrite work off the main thread where possible, reducing pressure while players explore, teleport, or load new chunks. - 🧯 **New async backpressure**: Adds `async-queue-size`, defaulting to `16`, to prevent queued rewrite snapshots from growing without bounds during heavy chunk loading. - 📊 **Real exploration and stress-test verified**: A real Fabric spark run with one player held `20.00` TPS, with median MSPT `3.31ms`; `meowantixray` accounted for about `3.55%` in the server-thread mods view. The project also includes a Minecraft `26.1.2` network fake-player runner that logs in like a real client, receives chunk packets, replies to keepalive and chunk batch packets, and can use RCON teleports to load real terrain. - 🧪 **8 fake-player stress test passed**: Before the fix, 8 network fake players repeatedly teleporting and loading chunks could trigger Java heap OOM. After the fix, a 90-second stress run completed with 0 client errors. With the conservative default queue, the run still completed about 36k chunk receives, making this project a better home for future anti-xray performance work. - 🔌 **Fabric / NeoForge behavior alignment**: The anti-xray core remains shared across both loaders, keeping config, permissions, Paper parity behavior, and performance strategy consistent. - 🛠️ **More diagnostics**: `/antixray profile` remains available, and `/antixray stress` helps server owners and developers inspect rewrite cost during troubleshooting. ## Config Changes New config option: ```yml anti-xray: async-chunk-rewrite: true async-worker-threads: 1 async-queue-size: 16 ``` `async-queue-size` controls how many async rewrite tasks may wait in the queue. The default `16` favors memory safety. If your server has more memory and you want higher exploration throughput, try `32` or `64`. ## How to Use 1. Download the file matching your server loader: - Fabric: `meowantixray-fabric-1.0.0.jar` - NeoForge: `meowantixray-neoforge-1.0.0.jar` 2. Put it into the server `mods` folder. 3. Start the server. The config is generated at: ```text config/meowantixray.yml ``` 4. Useful commands: - `/antixray status` shows status and update-check results - `/antixray reload` reloads the config - `/antixray profile` shows rewrite counts and timing metrics - `/antixray debug <world> <x> <y> <z>` checks whether a specific block would be hidden ## Pregenerated Worlds and Web Maps - 🗺️ Pregeneration and chunk preloading do not bypass this mod. Meow Anti-Xray applies when chunk packets are sent to player clients, not when chunks are generated server-side. - 🧭 Web map renderers such as Dynmap or BlueMap may read real server chunk data directly. Those are not player chunk packets, so configure hiding rules in the map plugin/mod separately. ## Roadmap - 🔍 Continue tracking Paper Anti-Xray defaults and behavior. - 📉 Further reduce memory allocation and GC pressure during chunk packet rewriting. - 🧪 Improve stress testing and profiling output so server owners can tune config more confidently. - 🌐 Keep Fabric / NeoForge support aligned while tracking Minecraft protocol changes. - 🧭 Carry forward the anti-xray feature that newer MeowConsole versions will no longer maintain. Compatibility fixes, version updates, and performance improvements will be released here. ## For MeowConsole Users - 🐾 If you need anti-xray protection, migrate to `Meow Anti-Xray`; this is the official maintained home for that feature going forward. - 🧩 Newer MeowConsole versions will focus on other server helper features and will no longer include or maintain anti-xray.