ВЕРСИИ (16)

### ADDITIONS: -- Added a notice when TVs are not bound to EAS blocks -- Added tropical storm and hurricane watches and warnings to TVs ### FIXES -- Fixed a bug where hurricane warnings being issued caused the client to crash -- Fixed STOP REQUESTED & radar overlay log spam -- Fixed a UI bug with cancelling warnings ### REMOVED -- removed drill mode (it was only supposed to be there for testing no)

**ADDITIONS:** - the obvious, of course, full compatibility with 0.17+ pmweather - There is now a county system. Counties are named polygon regions and give warnings proper place news, says which NWS office owns which ground, and can determine the coverage of watches. You can create counties by standing at each corner of your county in order: ``` /county begin <name> /county point (repeat at each corner) /county finish [office] ``` ``` /county undo ``` will remove the last point, ``` /county cancel ``` will cancel the current county. Alternatively, you can use ``` /county gui ``` to open the County editor, which does the same job on a map. - Added NWS Jursidiction Enforcement option. An office's jurisdiction is the set of the counties assigned to it. Turning on NWSJurisdictionEnforcement in the server settings and creating a warning which has area outside of the jurisdiction of an NWS office will result in that county being trimmed. Enabling AllowWarmOutsideOwnJurisdiction will allow warning area to overlap unclaimed area. It is advised to have TrimtToCounties *on* so that you can clip the polygon instead of rejecting it entirely. - WarnGen Customization, where you can change the issued product text, visible in the warngen menu. - There are now map controls in the warngen UI. You can now toggle town, land, county overlays, change the radar product, amend the points of existing polygons, cancel warnings, etc. You can scroll out and move around with the middle mouse button at a whim. - added perms (easaddon.town.admin) - Refined autogenerated risks - Added a config option to set the IP address of the TTS server, in preparation for releasing the full TTS server for release - Registered addon with pmweather **FIXES:** - Fixed a dreaded bug where the volume for TTS did not save as the player moved between worlds - Fixed a bug where a storm expiring anywhere was used to stop whatever got announced - The NWR tone and SAME Header now is bound by the same stop mechanics as TTS, meaning they will not persist if you stop your game or leave the game - A lot of other things not mentioned - Fixed some text overlap - Did a UI overhaul on select uis i didn't really like lol

### ADDITIONS: WARNGEN capability has been added for manually drawing warnings, which can be enabled-disabled by the server using the following CONFIG options: AUTO_DISABLED: Disables automatic warnings entirely, only allowing for manual warnings. AUTO_FALLBACK_WHEN_NO_TOWN_OPS_ONLINE: Only allows automatic warnings when there are no town operators online for the specified EAS block. BOTH_ENABLED: Both automatic and manual warnings are enabled MANUAL_DISABLED: Automatic warnings only. Storm Anchoring required: Requires warngen operators to have a real storm within the polygon Additionally, a maximum area, a maximum issue range, a maximum duration, and a cooldown can be instituted per player Operators can do warnGen by right-clicking on the EAS block when warngen is enabled. For EAS blocks not within a specific town, WarnGen will only be able to be used by the person who placed down the EAS block. The person who placed the eas block can add operators for warngen by shift-clicking the EAS block and inserting a name. They can be removed at any time. Automatic watches have been added, based on the SPC Day 1 outlook generated by the SPC block. You will need to generate a day1 outlook for automatic watches to work. Watches are issued at the start of every day based off the SPC day 1 outlook. You can disable auto-issuance in the config, and disable allowing players to manually issue watches in the config. Automatic watches can be received through the EAS transmitter now. Added options in the config to allow for local vs global warning coverage in the weather channel. ### REMOVED: Removed creating watch polygons & watch durations Alert beeps and the EAS tone should no longer play on the TV if the storm is decreasing in strength (ex. from a tornado emergency to PDS warning) TTS should now stop completely when the game is paused and when you leave the world TTS should be issued only one time per warning TTS should now stop completely when the TV block is destroyed, and should stop when the warning in question is manually or automatically cancelled. ### FIXES: Fixed a huge bug with radar. Thank you to @broomalune for showing me this huge bug

Forge release! Fixed some errors with recipes Compatable only with PMweather 0.16.4-1.20.1

# EAS VOICE SHOULD WORK ON ALL DEVICES WITH THIS VERSION, IF YOU HAD ISSUES WITH NOT HEARING THE EAS VOICE WHEN EAS WAS ACTIVATED ON TV **ADDITIONS:** Added a new craftable TV, which binds to the EAS block and displays active warnings on its screen. You must shift-click the TV to an EAS block to create a connection, and then place down. There are two channels: 1. EAS channel, which will relay warnings for the local area. 2. Weather channel, which will relay a biome-colored map of the surrounding area and a live radar reflectivity painted over the map. It will also relay active warning polygons throughout the server. EAS Tom voice added for all of these channels, which can be muted by shift-clicking the TV. **You will need an internet connection to use EAS Tom.** **EAS TOM MAY NOT WORK WITH SOME INTERNET CONNECTIONS, SO PLEASE DOWNLOAD 0.16.4-SERVERFIX** You can change channels by right-clicking the tv.

**ADDITIONS:** Added a new craftable TV, which binds to the EAS block and displays active warnings on its screen. You must shift-click the TV to an EAS block to create a connection, and then place down. There are two channels: 1. EAS channel, which will relay warnings for the local area. 2. Weather channel, which will relay a biome-colored map of the surrounding area and a live radar reflectivity painted over the map. It will also relay active warning polygons throughout the server. EAS Tom voice added for all of these channels, which can be muted by shift-clicking the TV. **You will need an internet connection to use EAS Tom.** **EAS TOM MAY NOT WORK WITH SOME INTERNET CONNECTIONS, SO PLEASE DOWNLOAD 0.16.4-SERVERFIX** You can change channels by right-clicking the tv.

### ADDITIONS: - Added compatability for pmweather 0.16a - Easaddon commands can now be used for singleplayer worlds - Added a clear button for risk drawing ### FIXES: - Menu blur issue should be fixed now - Fixed clientbound/minecraft:custom_payload error - Tornadoes should not be able to be surveyed unless the tornado has ended - Watch duration is now in minutes and not hours, and should no longer appear as unknown when a duration is set - Tornado duration time stops when the game is paused - Detection and display range now saves ### REMOVALS: - Dreaded radar overlay hitbox removed - Removed auto-generating risks at the start of each day - Removed opaque overlay when attempting to draw risks

# ADDITIONS Added a config Added options in the configuration to extend the range of storm detection by the EAS block, manageable in singleplayer/multiplayer Added four blocks/items: Cyclone Tracker, Cyclone Block, SPC Station, and the Outlook Receiver. The Cyclone Tracker will allow you to track hurricane windspeed, width and direction. It must be shift-click bounded to the Cyclone block (which must also be directionally attached to a working EAS Transmitter) to work. You can toggle between automatic, manual, or disabled hurricane naming in the configuration. You can add your own names to the hurricane naming list in the configuration Added hurricane / tropical storm polygons Added hurricane / tropical storm watches which will warn you of incoming hurricanes Added support for town creation by doing /easaddon town. This allows for localized warnings texts such as: ``` NWS Springfield has issued a Tornado Warning for Joplin ``` You can set towns under the jurisdiction of an NWS office You can manually set tornado or severe thunderstorm watches by using the SPC Station block within a registered NWS office. You can modify speciifc severe probabilities within a watch. You can now issue outlooks for your local SPC office if you are an operator or the mayor of a town, up until day 3, manually or automatically. Added abilitiy to 'pin' tornadoes and hurricanes in their respective GUIs so that it prevents them from being cleaned up when attempting to clear inactive entries (thanks @trb_anims) Added a config option to turn down the volume of the EAS tone Added a config option to switch between the time format for EAS alerts Added a config option to disable the debug output # CHANGES Damage calculations should now sufficiently account for ground scouring and debarking, no matter if the tornado is beyond render distance or not. This should increase the rating on tornadoes that are extremely powerful but dont hit a lot of things to warrant a higher rating. Fixed a bug where players could not further rate a tornado after the first rating Fixed a bug with warning polygon placement over large distances on radar that originally prevented me from adding a configuration to extend the range Fixed tornadoes that are clearly active in game but registered as inactive in the damage surveyor Bug fixes Plenty more probably

### ADDITIONS: Added support for tree debarking in damage calculations ### FIXES Fixed a HUGE bug where particularly large tornadoes were not able to be surveyed properly Fixed 'status ended' bug (hopefully) Fixed a GUI glitch in the damage survey screen Damage calculations should be more accurate now

### FIXES Tornado widths now no longer affect if the tornado was surveyable or not (for tornadoes with less than 15 width) Fixed (hopefully) a client-server discrepancy wherein the client and server did not agree on whether chunks were surveyable or not Fixed mouse cursor not lining up with tornado selection Fixed 'Survey' being the max width in the main screen Fixed problem where tornado data from one world would port to another one Fixed GUI scale hiding crucial buttons ### CHANGES Changed tornado colors so that theyre more contrasting Thanks to official_tube on discord for finding half of these bugs

# THE TORNADO RATING UPDATE! You can now rate tornadoes! Refer to the video below to demonstrate how rating works. <iframe width="560" height="315" src="https://www.youtube-nocookie.com/embed/F2UvlhCo6JU" title="YouTube video player" frameborder="0" allow="accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share" allowfullscreen></iframe> **IF YOU CAN NOT SEE THE WHOLE GUI, ADJUST YOUR GUI SCALE IN VIDEO SETTINGS** ### ADDITIONS: - Added Tornado Rating system (multiplayer capable!) - Added Damage Surveyor item - You can now view the list of tornadoes & their max windspeed & width with the Damage Surveyor since you joined the world/server - You can now view the path a specific tornado has taken - You can now view the windspeed/width on a coordinate-by-coordinate basis - Updated block textures.. no more midland radio & enhanced EAS Block texture ### CHANGES - Fixed logging in the console.. it should now be not as bad - Fixed (hopefully) a bug with rendering polygons where you could only see it from the bottom. If this still occurs, place the radar on top of the EAS Block. - Fixed a typo in warning messages - Hopefully fixed some other bugs i forgot to mention here

### CHANGES - Radar overlay block is destroyed when the corresponding radar is - Made polygons update 5x slower to add support for slower PCs - Radar overlay block now does not get in the way of radar ### FIXES: - Fixed tornado warning polygons not updating with windspeed, forcing one to manually replace the radar block - Fixed multiplayer bug where polygons stayed forever even if the storm was forcibly removed - Multiplayer functionality with all protomanly verisons >= 0.14a! - Fixed common crash when rendering polygons

### ADDITIONS: Allowed polygons to move with the storm as it moves Added trapezoid shape to EAS polygons Polygons are now hollow, and so you will not see a a solid color if there are too many warnings issued ### FIXES: Fixed EAS Block not dropping itself Fixed center of polygon being only the center of radar Fixed being able to see polygons through blocks Fixed rotating color once tornado warnings were issued Fixed polygons being extremely large

### FIXES: - Fixed problem with massive FPS drops once polygons were loaded on radar - Recipes are now added (yay!). Refer to gallery for recipes - Fixed a problem with polygons not showing up when a radar was planed AFTER a warning had been issued Dm idot.__ on discord for groundbreaking errors

### ADDITIONS: Added warning polygons whenever you put your Radar Block next to the EAS Block (which also must be connected to a Weather Station) whenever a warning is issued by EAS ### FIXES: Fixed bug where windspeed direction was actually the windspeed of the tornado Fixed being able to see output of EAS Block ### KNOWN ISSUES Still does not work on online multiplayer (will be fixed with 0.14.0) Issue with rotating color on polygons whenever there's a tornado warning issued Issue where center of polygon is not the center of the storm Issue where Polygons do not show up if the Radar is out of render distance (you must re-place the radar block) No recipes DM idot.__ on discord if there are any game-breaking bugs

Alpha release! Version number corresponds with ProtoManly version