ВЕРСИИ (110)

*2026-09-24* - New backend for measuring and calculating trains and the navigator - Improves overall accuracy and performance and fixes several issues (e.g. endless route searching in the navigator on complex networks). - Live arrival times are now based on the train's actual physics instead of a rough estimate and travel times are learned over time. - Delay reasons now accumulate: the original reason stays visible until the train is on time again, instead of being overwritten by a later reason. - Trains no longer disappear from the displays when derailed or their schedule is stopped. They are shown as cancelled or out of service instead. - Improved train separation: trains are now held at the platform and no longer block the signal sections in front of it while waiting. - Improved prioritized destination: the detour is now measured against the unobstructed route. - Better compatibility with time changing mods mods. - Added: [Web Rest API](https://wiki.mrjulsen.net/createrailwaysnavigator/web_features/) - Disabled by default. Must be enabled in the common config. - Currently only has some GET endpoints. - Access via HTTP. - [Uses the open source project Eclipse Jetty](https://wiki.mrjulsen.net/createrailwaysnavigator/web_features/#dependencies) - The api and web features will be expanded with future updates - More information about the API and an OpenAPI JSON file in the wiki. - Added: [Penalty Anchor](https://wiki.mrjulsen.net/createrailwaysnavigator/blocks/penalty-anchor/) - An obstacle on the track that trains try to avoid - Can be used to route trains onto specific paths - Use Redstone to control or read the block - Added: New navigation options - Routing strategy: prefer the fastest connection or the one with the fewest transfers. - Waypoints: search for a route that travels via one or more stations of your choice. - Direct connections only: hide every connection that has a transfer. - Added: New options for the prioritized destination instruction - Wait Instead Of Diverting: stay at the station until one entry becomes reachable instead of taking a lower priority. - Detour Threshold: how much longer an alternative route may be before the train prefers to wait. - Added: New delay causes - Added: Displays can now be placed by Schematicannons - Added: Config option to hide stations that are not part of any station tag - Added: Config option to display durations as real life time - Added: Config option to limit the number of transfers the navigator may use - Added: Config option to include typical waiting times in the scheduled times - Fixed: Rare crash caused by index out of range - Fixed: Text on displays may get invisible - Fixed: Error in the console when loading train displays - Fixed: Error in the console about key mapping - Fixed: The custom language feature breaks translations of the Iris Shaders config screen - Fixed: Exploits with the permissions system - Fixed: The main navigator screen doesn't show any tooltips - Fixed: The "from" and "to" textboxes are not filled when using a recent search - Fixed: Wrong platform on focus displays when the platform of a train has changed - Fixed: Wrong order of entries on the displays - Fixed: Delay reasons are shown as soon as they exist, even if the train isn't delayed - Fixed: The exit direction is not displayed sometimes - Fixed: The navigator finds no connection on very large networks - Updated: Recently searched entries can be pinned - Updated: Now using local codes instead of an enum for the custom language config setting - Updated: A confirmation dialog is shown before opening any links - Updated: Moved most of the common config settings to the server config (this may reset your settings) - Updated: Reworked the notifications of the route overlay - Updated: Reworked the navigation settings and the departure board options UI - Removed: Some config options that no longer apply to the new backend - Now licensed under the GNU Lesser General Public License v3.0 (previously GNU General Public License v3.0) - A copy of the license is included in the jar - The manifest contains the JDK used to build the jar and other useful build information <!--run-id:36043970706-->

*2026-09-24* - New backend for measuring and calculating trains and the navigator - Improves overall accuracy and performance and fixes several issues (e.g. endless route searching in the navigator on complex networks). - Live arrival times are now based on the train's actual physics instead of a rough estimate and travel times are learned over time. - Delay reasons now accumulate: the original reason stays visible until the train is on time again, instead of being overwritten by a later reason. - Trains no longer disappear from the displays when derailed or their schedule is stopped. They are shown as cancelled or out of service instead. - Improved train separation: trains are now held at the platform and no longer block the signal sections in front of it while waiting. - Improved prioritized destination: the detour is now measured against the unobstructed route. - Better compatibility with time changing mods mods. - Added: [Web Rest API](https://wiki.mrjulsen.net/createrailwaysnavigator/web_features/) - Disabled by default. Must be enabled in the common config. - Currently only has some GET endpoints. - Access via HTTP. - [Uses the open source project Eclipse Jetty](https://wiki.mrjulsen.net/createrailwaysnavigator/web_features/#dependencies) - The api and web features will be expanded with future updates - More information about the API and an OpenAPI JSON file in the wiki. - Added: [Penalty Anchor](https://wiki.mrjulsen.net/createrailwaysnavigator/blocks/penalty-anchor/) - An obstacle on the track that trains try to avoid - Can be used to route trains onto specific paths - Use Redstone to control or read the block - Added: New navigation options - Routing strategy: prefer the fastest connection or the one with the fewest transfers. - Waypoints: search for a route that travels via one or more stations of your choice. - Direct connections only: hide every connection that has a transfer. - Added: New options for the prioritized destination instruction - Wait Instead Of Diverting: stay at the station until one entry becomes reachable instead of taking a lower priority. - Detour Threshold: how much longer an alternative route may be before the train prefers to wait. - Added: New delay causes - Added: Displays can now be placed by Schematicannons - Added: Config option to hide stations that are not part of any station tag - Added: Config option to display durations as real life time - Added: Config option to limit the number of transfers the navigator may use - Added: Config option to include typical waiting times in the scheduled times - Fixed: Rare crash caused by index out of range - Fixed: Text on displays may get invisible - Fixed: Error in the console when loading train displays - Fixed: Error in the console about key mapping - Fixed: The custom language feature breaks translations of the Iris Shaders config screen - Fixed: Exploits with the permissions system - Fixed: The main navigator screen doesn't show any tooltips - Fixed: The "from" and "to" textboxes are not filled when using a recent search - Fixed: Wrong platform on focus displays when the platform of a train has changed - Fixed: Wrong order of entries on the displays - Fixed: Delay reasons are shown as soon as they exist, even if the train isn't delayed - Fixed: The exit direction is not displayed sometimes - Fixed: The navigator finds no connection on very large networks - Updated: Recently searched entries can be pinned - Updated: Now using local codes instead of an enum for the custom language config setting - Updated: A confirmation dialog is shown before opening any links - Updated: Moved most of the common config settings to the server config (this may reset your settings) - Updated: Reworked the notifications of the route overlay - Updated: Reworked the navigation settings and the departure board options UI - Removed: Some config options that no longer apply to the new backend - Now licensed under the GNU Lesser General Public License v3.0 (previously GNU General Public License v3.0) - A copy of the license is included in the jar - The manifest contains the JDK used to build the jar and other useful build information <!--run-id:36037587367-->

*2026-09-24* - New backend for measuring and calculating trains and the navigator - Improves overall accuracy and performance and fixes several issues (e.g. endless route searching in the navigator on complex networks). - Live arrival times are now based on the train's actual physics instead of a rough estimate and travel times are learned over time. - Delay reasons now accumulate: the original reason stays visible until the train is on time again, instead of being overwritten by a later reason. - Trains no longer disappear from the displays when derailed or their schedule is stopped. They are shown as cancelled or out of service instead. - Improved train separation: trains are now held at the platform and no longer block the signal sections in front of it while waiting. - Improved prioritized destination: the detour is now measured against the unobstructed route. - Better compatibility with time changing mods mods. - Added: [Web Rest API](https://wiki.mrjulsen.net/createrailwaysnavigator/web_features/) - Disabled by default. Must be enabled in the common config. - Currently only has some GET endpoints. - Access via HTTP. - [Uses the open source project Eclipse Jetty](https://wiki.mrjulsen.net/createrailwaysnavigator/web_features/#dependencies) - The api and web features will be expanded with future updates - More information about the API and an OpenAPI JSON file in the wiki. - Added: [Penalty Anchor](https://wiki.mrjulsen.net/createrailwaysnavigator/blocks/penalty-anchor/) - An obstacle on the track that trains try to avoid - Can be used to route trains onto specific paths - Use Redstone to control or read the block - Added: New navigation options - Routing strategy: prefer the fastest connection or the one with the fewest transfers. - Waypoints: search for a route that travels via one or more stations of your choice. - Direct connections only: hide every connection that has a transfer. - Added: New options for the prioritized destination instruction - Wait Instead Of Diverting: stay at the station until one entry becomes reachable instead of taking a lower priority. - Detour Threshold: how much longer an alternative route may be before the train prefers to wait. - Added: New delay causes - Added: Displays can now be placed by Schematicannons - Added: Config option to hide stations that are not part of any station tag - Added: Config option to display durations as real life time - Added: Config option to limit the number of transfers the navigator may use - Added: Config option to include typical waiting times in the scheduled times - Fixed: Rare crash caused by index out of range - Fixed: Text on displays may get invisible - Fixed: Error in the console when loading train displays - Fixed: Error in the console about key mapping - Fixed: The custom language feature breaks translations of the Iris Shaders config screen - Fixed: Exploits with the permissions system - Fixed: The main navigator screen doesn't show any tooltips - Fixed: The "from" and "to" textboxes are not filled when using a recent search - Fixed: Wrong platform on focus displays when the platform of a train has changed - Fixed: Wrong order of entries on the displays - Fixed: Delay reasons are shown as soon as they exist, even if the train isn't delayed - Fixed: The exit direction is not displayed sometimes - Fixed: The navigator finds no connection on very large networks - Updated: Recently searched entries can be pinned - Updated: Now using local codes instead of an enum for the custom language config setting - Updated: A confirmation dialog is shown before opening any links - Updated: Moved most of the common config settings to the server config (this may reset your settings) - Updated: Reworked the notifications of the route overlay - Updated: Reworked the navigation settings and the departure board options UI - Removed: Some config options that no longer apply to the new backend - Now licensed under the GNU Lesser General Public License v3.0 (previously GNU General Public License v3.0) - A copy of the license is included in the jar - The manifest contains the JDK used to build the jar and other useful build information <!--run-id:36037587367-->

*2026-05-31* - Added: Option to prevent scale and pos reset on display link update #181 - Added: `%via:<custom delimiter>%` and `%trainN.via:<custom delimiter>%` placeholder options to use custom delimiter #181 - Changed: `%title%` (on-board) shows the schedule title/last stop only #181 - Changed: All wiki links now point to the new wiki https://wiki.mrjulsen.net/createrailwaysnavigator/ - Fixed: Crash when rich text is updated and rendered simultaneously #179 - Fixed: Leading comma in the `%via%` placeholder #188 - Fixed: Delay approx text from the `%delay_time%` placeholder #188 - Updated translations from Crowdin <!--run-id:26712206509-->

*2026-05-31* - Added: Option to prevent scale and pos reset on display link update #181 - Added: `%via:<custom delimiter>%` and `%trainN.via:<custom delimiter>%` placeholder options to use custom delimiter #181 - Changed: `%title%` (on-board) shows the schedule title/last stop only #181 - Changed: All wiki links now point to the new wiki https://wiki.mrjulsen.net/createrailwaysnavigator/ - Fixed: Crash when rich text is updated and rendered simultaneously #179 - Fixed: Leading comma in the `%via%` placeholder #188 - Fixed: Delay approx text from the `%delay_time%` placeholder #188 - Updated translations from Crowdin <!--run-id:26712124046-->

*2026-05-31* - Added: Option to prevent scale and pos reset on display link update #181 - Added: `%via:<custom delimiter>%` and `%trainN.via:<custom delimiter>%` placeholder options to use custom delimiter #181 - Changed: `%title%` (on-board) shows the schedule title/last stop only #181 - Changed: All wiki links now point to the new wiki https://wiki.mrjulsen.net/createrailwaysnavigator/ - Fixed: Crash when rich text is updated and rendered simultaneously #179 - Fixed: Leading comma in the `%via%` placeholder #188 - Fixed: Delay approx text from the `%delay_time%` placeholder #188 - Updated translations from Crowdin <!--run-id:26712124046-->

*2026-04-30* - Added: New placeholders for train, platform and elevator displays #156 #166 #170 - Fixed: Using wildcards only in Prioritized Destination Instructions crashes the world - Fixed: Prioritized Destination Instruction does not work with wildcards - Fixed: Crash when removing the train schedule - Fixed: Rare crash in dev environment #171 - Fixed: Rare crash when trying to access config values while loading the game - Updated translations from Crowdin <!--run-id:25187065525-->

*2026-04-30* - Added: New placeholders for train, platform and elevator displays #156 #166 #170 - Fixed: Using wildcards only in Prioritized Destination Instructions crashes the world - Fixed: Prioritized Destination Instruction does not work with wildcards - Fixed: Crash when removing the train schedule - Fixed: Rare crash in dev environment #171 - Fixed: Rare crash when trying to access config values while loading the game - Updated translations from Crowdin

*2026-04-30* - Added: New placeholders for train, platform and elevator displays #156 #166 #170 - Fixed: Using wildcards only in Prioritized Destination Instructions crashes the world - Fixed: Prioritized Destination Instruction does not work with wildcards - Fixed: Crash when removing the train schedule - Fixed: Rare crash in dev environment #171 - Fixed: Rare crash when trying to access config values while loading the game - Updated translations from Crowdin <!--run-id:25188989870-->

*2026-03-14* - 1.21.1 Port

*2026-02-20* - Added: Train Debug screen - Added: The swap button has been added back to the navigation screen - Added: Train Separation now allows to set a custom station filter - Added: Displays now act as copycat blocks (except the sloped display) - Added: New Option to configure whether displays should show only arrivals, departures, or both - Fixed: Display data errors are spammed in the console, that a value is not present - Fixed: The formatting of time values is incorrect sometimes - Fixed: Items already added to a list or duplicates are not removed from autocompletion - Fixed: Part of some windows is cut off - Fixed: Number picker components do not render text shadow - Fixed: The conversion of train separation time between real time and game time in the settings screen is not working correctly - Fixed: Display text is flickering - Fixed: Platform Focus Displays show the wrong platform if wildcards are used in the display link and a train changes the platform - Fixed: Platform Focus Display shows wrong arrival time - Fixed: Display Panels cannot be placed in the center of a block - Fixed: Display Settings are not saved when edited on contraptions - Fixed: Train carriage index is cut off on some displays - Fixed: Trains show the wrong line, especially at terminus stations - Fixed: Passenger information and Train destination displays show the wrong destination while waiting at the terminus - Fixed: The buttons of the Advanced Display Settings Screen cannot be used - Changed: Moved some config settings from the Client to the Common config - Changed: Now using Create 6's new wildcard system - Changed: Improved performance of the networking code and the GUI (especially the autocompletion popups) - Changed: Trains on the displays are now sorted by their real departure time - Changed: New option to display a train multiple times on a display (for each stop) - Removed: Displays no longer automatically change their type, to avoid confusion - Requires DragonLib 3.0.21

*2026-02-20* - Added: Train Debug screen - Added: The swap button has been added back to the navigation screen - Added: Train Separation now allows to set a custom station filter - Added: Displays now act as copycat blocks (except the sloped display) - Added: New Option to configure whether displays should show only arrivals, departures, or both - Fixed: Display data errors are spammed in the console, that a value is not present - Fixed: The formatting of time values is incorrect sometimes - Fixed: Items already added to a list or duplicates are not removed from autocompletion - Fixed: Part of some windows is cut off - Fixed: Number picker components do not render text shadow - Fixed: The conversion of train separation time between real time and game time in the settings screen is not working correctly - Fixed: Display text is flickering - Fixed: Platform Focus Displays show the wrong platform if wildcards are used in the display link and a train changes the platform - Fixed: Platform Focus Display shows wrong arrival time - Fixed: Display Panels cannot be placed in the center of a block - Fixed: Display Settings are not saved when edited on contraptions - Fixed: Train carriage index is cut off on some displays - Fixed: Trains show the wrong line, especially at terminus stations - Fixed: Passenger information and Train destination displays show the wrong destination while waiting at the terminus - Fixed: The buttons of the Advanced Display Settings Screen cannot be used - Changed: Moved some config settings from the Client to the Common config - Changed: Now using Create 6's new wildcard system - Changed: Improved performance of the networking code and the GUI (especially the autocompletion popups) - Changed: Trains on the displays are now sorted by their real departure time - Changed: New option to display a train multiple times on a display (for each stop) - Removed: Displays no longer automatically change their type, to avoid confusion - Requires DragonLib 3.0.21

- Now using DragonLib 3 - Fixed: Fonts get corrupted when reloading resources while Advanced Displays are visible on the screen - Fixed: Display content may render out of bounds - Fixed: Some text components on displays may overlap - Fixed: The GUI is displayed incorrectly while scrolling if the current version of Pantographs & Wires is installed - Fixed: DragonLib's Networking System can be softlocked, preventing data exchange with the server ### Currently unavailable - Debug screen (Client only feature) - Train Overview Screen

- Now using DragonLib 3 - Fixed: Fonts get corrupted when reloading resources while Advanced Displays are visible on the screen - Fixed: Display content may render out of bounds - Fixed: Some text components on displays may overlap - Fixed: The GUI is displayed incorrectly while scrolling if the current version of Pantographs & Wires is installed - Fixed: DragonLib's Networking System can be softlocked, preventing data exchange with the server ### Currently unavailable - Debug screen (Client only feature) - Train Overview Screen

- Support for Create 6.0.7+ - Changed: Allow simple text as display targets for external display links data - Fixed issues with Advanced Displays and external display link data - Fixed crash while calculating median - Updated Chinese (simplified), Japanese (community contributions) ⚠️ This version is only compatible with Create 6.0.7 or newer! Versions 6.0.0 - 6.0.6 are no longer supported! ⚠️ This is NOT the announced DragonLib 3 update, but only a minor compatibility update! That's why there are no new features or major bug fixes. The DragonLib 3 version of CRN is in development.

- Support for Create 6.0.7+ - Changed: Allow simple text as display targets for external display links data - Fixed issues with Advanced Displays and external display link data - Fixed crash while calculating median - Updated Chinese (simplified), Japanese (community contributions) ⚠️ This version is only compatible with Create 6.0.7 or newer! Versions 6.0.0 - 6.0.6 are no longer supported! ⚠️ This is NOT the announced DragonLib 3 update, but only a minor compatibility update! That's why there are no new features or major bug fixes. The DragonLib 3 version of CRN is in development.

- Support for Create 6.0.7+ - Changed: Allow simple text as display targets for external display links data - Fixed issues with Advanced Displays and external display link data - Fixed crash while calculating median - Updated Chinese (simplified), Japanese (community contributions) ⚠️ This version is only compatible with Create 6.0.7 or newer! Versions 6.0.0 - 6.0.6 are no longer supported! ⚠️ This is NOT the announced DragonLib 3 update, but only a minor compatibility update! That's why there are no new features or major bug fixes. The DragonLib 3 version of CRN is in development.

- Added: Displays can now be edited directly on trains without having to disassemble them - ⚠️ Trains that were built with previous versions of CRN have to be reassembled for this feature to work! - Added: New setting to deactivate the text "Do not board" on train displays - Added: New setting to deactivate the time label on Platform Table Displays - Added: New config option to change the refresh rate of displays - Changed: Displays now update faster (every 50 ticks) - Fixed: Rare crash when a new train line or train category is created - Fixed: Trains never initialize when the same destination has been added several times in a row in the schedule - Fixed: The Travel Companion cannot be removed if the navigator is not in the inventory - Fixed: Server crash if invalid regex are used as train destinations - Fixed: The heading label in Passenger Displays with Schedule is too narrow - Fixed: The train name may extend beyond the border of some displays - Fixed: "Include Start of Next Section" does not work in Schedules with just one section - Fixed: No target station is displayed when the train is between the last and first station of the schedule, and there is only one Schedule Section with "Include Start of Next Section" being activated

- Added: Displays can now be edited directly on trains without having to disassemble them - ⚠️ Trains that were built with previous versions of CRN have to be reassembled for this feature to work! - Added: New setting to deactivate the text "Do not board" on train displays - Added: New setting to deactivate the time label on Platform Table Displays - Added: New config option to change the refresh rate of displays - Changed: Displays now update faster (every 50 ticks) - Fixed: Rare crash when a new train line or train category is created - Fixed: Trains never initialize when the same destination has been added several times in a row in the schedule - Fixed: The Travel Companion cannot be removed if the navigator is not in the inventory - Fixed: Server crash if invalid regex are used as train destinations - Fixed: The heading label in Passenger Displays with Schedule is too narrow - Fixed: The train name may extend beyond the border of some displays - Fixed: "Include Start of Next Section" does not work in Schedules with just one section - Fixed: No target station is displayed when the train is between the last and first station of the schedule, and there is only one Schedule Section with "Include Start of Next Section" being activated

- Added: Displays can now be edited directly on trains without having to disassemble them - ⚠️ Trains that were built with previous versions of CRN have to be reassembled for this feature to work! - Added: New setting to deactivate the text "Do not board" on train displays - Added: New setting to deactivate the time label on Platform Table Displays - Added: New config option to change the refresh rate of displays - Changed: Displays now update faster (every 50 ticks) - Fixed: Rare crash when a new train line or train category is created - Fixed: Trains never initialize when the same destination has been added several times in a row in the schedule - Fixed: The Travel Companion cannot be removed if the navigator is not in the inventory - Fixed: Server crash if invalid regex are used as train destinations - Fixed: The heading label in Passenger Displays with Schedule is too narrow - Fixed: The train name may extend beyond the border of some displays - Fixed: "Include Start of Next Section" does not work in Schedules with just one section - Fixed: No target station is displayed when the train is between the last and first station of the schedule, and there is only one Schedule Section with "Include Start of Next Section" being activated

- Added: Displays can now be edited directly on trains without having to disassemble them - ⚠️ Trains that were built with previous versions of CRN have to be reassembled for this feature to work! - Added: New setting to deactivate the text "Do not board" on train displays - Added: New setting to deactivate the time label on Platform Table Displays - Added: New config option to change the refresh rate of displays - Changed: Displays now update faster (every 50 ticks) - Fixed: Rare crash when a new train line or train category is created - Fixed: Trains never initialize when the same destination has been added several times in a row in the schedule - Fixed: The Travel Companion cannot be removed if the navigator is not in the inventory - Fixed: Server crash if invalid regex are used as train destinations - Fixed: The heading label in Passenger Displays with Schedule is too narrow - Fixed: The train name may extend beyond the border of some displays - Fixed: "Include Start of Next Section" does not work in Schedules with just one section - Fixed: No target station is displayed when the train is between the last and first station of the schedule, and there is only one Schedule Section with "Include Start of Next Section" being activated

- Added: Displays can now be edited directly on trains without having to disassemble them - ⚠️ Trains that were built with previous versions of CRN have to be reassembled for this feature to work! - Added: New setting to deactivate the text "Do not board" on train displays - Added: New setting to deactivate the time label on Platform Table Displays - Added: New config option to change the refresh rate of displays - Changed: Displays now update faster (every 50 ticks) - Fixed: Rare crash when a new train line or train category is created - Fixed: Trains never initialize when the same destination has been added several times in a row in the schedule - Fixed: The Travel Companion cannot be removed if the navigator is not in the inventory - Fixed: Server crash if invalid regex are used as train destinations - Fixed: The heading label in Passenger Displays with Schedule is too narrow - Fixed: The train name may extend beyond the border of some displays - Fixed: "Include Start of Next Section" does not work in Schedules with just one section - Fixed: No target station is displayed when the train is between the last and first station of the schedule, and there is only one Schedule Section with "Include Start of Next Section" being activated

- Added: Displays can now be edited directly on trains without having to disassemble them - ⚠️ Trains that were built with previous versions of CRN have to be reassembled for this feature to work! - Added: New setting to deactivate the text "Do not board" on train displays - Added: New setting to deactivate the time label on Platform Table Displays - Added: New config option to change the refresh rate of displays - Changed: Displays now update faster (every 50 ticks) - Fixed: Rare crash when a new train line or train category is created - Fixed: Trains never initialize when the same destination has been added several times in a row in the schedule - Fixed: The Travel Companion cannot be removed if the navigator is not in the inventory - Fixed: Server crash if invalid regex are used as train destinations - Fixed: The heading label in Passenger Displays with Schedule is too narrow - Fixed: The train name may extend beyond the border of some displays - Fixed: "Include Start of Next Section" does not work in Schedules with just one section - Fixed: No target station is displayed when the train is between the last and first station of the schedule, and there is only one Schedule Section with "Include Start of Next Section" being activated

- Added: Displays can now be edited directly on trains without having to disassemble them - ⚠️ Trains that were built with previous versions of CRN have to be reassembled for this feature to work! - Added: New setting to deactivate the text "Do not board" on train displays - Added: New setting to deactivate the time label on Platform Table Displays - Added: New config option to change the refresh rate of displays - Changed: Displays now update faster (every 50 ticks) - Fixed: Rare crash when a new train line or train category is created - Fixed: Trains never initialize when the same destination has been added several times in a row in the schedule - Fixed: The Travel Companion cannot be removed if the navigator is not in the inventory - Fixed: Server crash if invalid regex are used as train destinations - Fixed: The heading label in Passenger Displays with Schedule is too narrow - Fixed: The train name may extend beyond the border of some displays - Fixed: "Include Start of Next Section" does not work in Schedules with just one section - Fixed: No target station is displayed when the train is between the last and first station of the schedule, and there is only one Schedule Section with "Include Start of Next Section" being activated

- Added: Displays can now be edited directly on trains without having to disassemble them - ⚠️ Trains that were built with previous versions of CRN have to be reassembled for this feature to work! - Added: New setting to deactivate the text "Do not board" on train displays - Added: New setting to deactivate the time label on Platform Table Displays - Added: New config option to change the refresh rate of displays - Changed: Displays now update faster (every 50 ticks) - Fixed: Rare crash when a new train line or train category is created - Fixed: Trains never initialize when the same destination has been added several times in a row in the schedule - Fixed: The Travel Companion cannot be removed if the navigator is not in the inventory - Fixed: Server crash if invalid regex are used as train destinations - Fixed: The heading label in Passenger Displays with Schedule is too narrow - Fixed: The train name may extend beyond the border of some displays - Fixed: "Include Start of Next Section" does not work in Schedules with just one section - Fixed: No target station is displayed when the train is between the last and first station of the schedule, and there is only one Schedule Section with "Include Start of Next Section" being activated

## beta-0.8.3 - Fixed: Potential crash when placing the navigator on a Lectern [1.18 - 1.20] - Fixed: Books can no longer be placed on Lecterns [1.21] - Fixed: The navigator is duplicated when clicking on an empty Lectern [1.21] ## beta-0.8.2 - Added: The navigator can be placed on lecterns - Added: Advanced displays can now also display data from other sources - Added: New information texts are shown on displays when a train is at the terminus (e.g. "Do not board", "This train terminates here") - Changed: The "Time: " prefix disappears when the display is too small - Changed: Displays automatically change the type when a display link is connected (can be deactivated in the config if there are any problems) - Fixed: Crash when using invalid placeholders - Fixed: Static Text parsing is incorrect in some cases (example: the time placeholder shows the hour only) - Fixed: Prioritized Destination Instruction does not work if a train is waiting at the targeted station - Fixed: Crash when using a clipboard or name tag - Fixed: Focus platform displays show the wrong platform on platform changes - Fixed: The Schedule Title is not used correctly - Fixed: The line texture on passenger information displays with schedule overlaps with the time string - Fixed: Sometimes Schedule Title is not recognized as a custom title - Fixed: The entries in the Schedule Section Settings Screen are not sorted alphabetically - Fixed: Train Line Colors cannot be used on Train Destination and Passenger Information Displays - Fixed: Crash when incorrect data is loaded - Fixed: Displays can display the wrong destination - Fixed: Schedule sections are not changed [Create 6 versions] - Fixed: Train Displays show nothing in some sections - Fixed: Train displays sometimes flicker between an empty schedule and "Out of service" - Fixed: Text Placement on Passenger Information Displays with Schedule is off in some cases - Fixed: Departure boards only show information at the bottom when the first train of the list has some information - Fixed: The Schedule Board in the navigator also shows departures when the train stops at a terminus station and including Start of Next Section is deactivated - Fixed: Crash if a canceled train should be displayed on a platform table display - Fixed: Trains change the stopovers, the destination and the schedule overview before it has reached the previous destination - Fixed: Arrivals are not displayed correctly on displays if the previous Schedule Section has Include start of next section activated - Fixed: Scrolling text platform displays show trains that end at that station and then continue into a deactivated section - Fixed: Detailed Train Destination displays show the wrong origin or the wrong destination - Fixed: Displays do not change reliably to "Out of service" while a train is moving into a deactivated Schedule Section - Fixed: Trains that stop at blacklisted stations are still shown on the displays - Fixed: The content of Advanced Displays is not rendered when the upper left corner is outside the camera [1.21] - Fixed: The background of all GUIs is not darkened [1.21] - Removed: Unused Events - Updated translations

- Fixed: Potential crash when placing the navigator on a Lectern [1.18 - 1.20] - Fixed: Books can no longer be placed on Lecterns [1.21] - Fixed: The navigator is duplicated when clicking on an empty Lectern [1.21]

- Fixed: Potential crash when placing the navigator on a Lectern [1.18 - 1.20] - Fixed: Books can no longer be placed on Lecterns [1.21] - Fixed: The navigator is duplicated when clicking on an empty Lectern [1.21]

- Fixed: Potential crash when placing the navigator on a Lectern [1.18 - 1.20] - Fixed: Books can no longer be placed on Lecterns [1.21] - Fixed: The navigator is duplicated when clicking on an empty Lectern [1.21]

- Fixed: Potential crash when placing the navigator on a Lectern [1.18 - 1.20] - Fixed: Books can no longer be placed on Lecterns [1.21] - Fixed: The navigator is duplicated when clicking on an empty Lectern [1.21]

- Fixed: Potential crash when placing the navigator on a Lectern [1.18 - 1.20] - Fixed: Books can no longer be placed on Lecterns [1.21] - Fixed: The navigator is duplicated when clicking on an empty Lectern [1.21]

- Fixed: Potential crash when placing the navigator on a Lectern [1.18 - 1.20] - Fixed: Books can no longer be placed on Lecterns [1.21] - Fixed: The navigator is duplicated when clicking on an empty Lectern [1.21]

- Fixed: Potential crash when placing the navigator on a Lectern [1.18 - 1.20] - Fixed: Books can no longer be placed on Lecterns [1.21] - Fixed: The navigator is duplicated when clicking on an empty Lectern [1.21]

- Added: The navigator can be placed on lecterns - Added: Advanced displays can now also display data from other sources - Added: New information texts are shown on displays when a train is at the terminus (e.g. "Do not board", "This train terminates here") - Changed: The "Time: " prefix disappears when the display is too small - Changed: Displays automatically change the type when a display link is connected (can be deactivated in the config if there are any problems) - Fixed: Crash when using invalid placeholders - Fixed: Static Text parsing is incorrect in some cases (example: the time placeholder shows the hour only) - Fixed: Prioritized Destination Instruction does not work if a train is waiting at the targeted station - Fixed: Crash when using a clipboard or name tag - Fixed: Focus platform displays show the wrong platform on platform changes - Fixed: The Schedule Title is not used correctly - Fixed: The line texture on passenger information displays with schedule overlaps with the time string - Fixed: Sometimes Schedule Title is not recognized as a custom title - Fixed: The entries in the Schedule Section Settings Screen are not sorted alphabetically - Fixed: Train Line Colors cannot be used on Train Destination and Passenger Information Displays - Fixed: Crash when incorrect data is loaded - Fixed: Displays can display the wrong destination - Fixed: Schedule sections are not changed [Create 6 versions] - Fixed: Train Displays show nothing in some sections - Fixed: Train displays sometimes flicker between an empty schedule and "Out of service" - Fixed: Text Placement on Passenger Information Displays with Schedule is off in some cases - Fixed: Departure boards only show information at the bottom when the first train of the list has some information - Fixed: The Schedule Board in the navigator also shows departures when the train stops at a terminus station and including Start of Next Section is deactivated - Fixed: Crash if a canceled train should be displayed on a platform table display - Fixed: Trains change the stopovers, the destination and the schedule overview before it has reached the previous destination - Fixed: Arrivals are not displayed correctly on displays if the previous Schedule Section has Include start of next section activated - Fixed: Scrolling text platform displays show trains that end at that station and then continue into a deactivated section - Fixed: Detailed Train Destination displays show the wrong origin or the wrong destination - Fixed: Displays do not change reliably to "Out of service" while a train is moving into a deactivated Schedule Section - Fixed: Trains that stop at blacklisted stations are still shown on the displays - Fixed: The content of Advanced Displays is not rendered when the upper left corner is outside the camera [1.21] - Fixed: The background of all GUIs is not darkened [1.21] - Removed: Unused Events - Updated translations

- Added: The navigator can be placed on lecterns - Added: Advanced displays can now also display data from other sources - Added: New information texts are shown on displays when a train is at the terminus (e.g. "Do not board", "This train terminates here") - Changed: The "Time: " prefix disappears when the display is too small - Changed: Displays automatically change the type when a display link is connected (can be deactivated in the config if there are any problems) - Fixed: Crash when using invalid placeholders - Fixed: Static Text parsing is incorrect in some cases (example: the time placeholder shows the hour only) - Fixed: Prioritized Destination Instruction does not work if a train is waiting at the targeted station - Fixed: Crash when using a clipboard or name tag - Fixed: Focus platform displays show the wrong platform on platform changes - Fixed: The Schedule Title is not used correctly - Fixed: The line texture on passenger information displays with schedule overlaps with the time string - Fixed: Sometimes Schedule Title is not recognized as a custom title - Fixed: The entries in the Schedule Section Settings Screen are not sorted alphabetically - Fixed: Train Line Colors cannot be used on Train Destination and Passenger Information Displays - Fixed: Crash when incorrect data is loaded - Fixed: Displays can display the wrong destination - Fixed: Schedule sections are not changed [Create 6 versions] - Fixed: Train Displays show nothing in some sections - Fixed: Train displays sometimes flicker between an empty schedule and "Out of service" - Fixed: Text Placement on Passenger Information Displays with Schedule is off in some cases - Fixed: Departure boards only show information at the bottom when the first train of the list has some information - Fixed: The Schedule Board in the navigator also shows departures when the train stops at a terminus station and including Start of Next Section is deactivated - Fixed: Crash if a canceled train should be displayed on a platform table display - Fixed: Trains change the stopovers, the destination and the schedule overview before it has reached the previous destination - Fixed: Arrivals are not displayed correctly on displays if the previous Schedule Section has Include start of next section activated - Fixed: Scrolling text platform displays show trains that end at that station and then continue into a deactivated section - Fixed: Detailed Train Destination displays show the wrong origin or the wrong destination - Fixed: Displays do not change reliably to "Out of service" while a train is moving into a deactivated Schedule Section - Fixed: Trains that stop at blacklisted stations are still shown on the displays - Fixed: The content of Advanced Displays is not rendered when the upper left corner is outside the camera [1.21] - Fixed: The background of all GUIs is not darkened [1.21] - Removed: Unused Events - Updated translations

- Added: The navigator can be placed on lecterns - Added: Advanced displays can now also display data from other sources - Added: New information texts are shown on displays when a train is at the terminus (e.g. "Do not board", "This train terminates here") - Changed: The "Time: " prefix disappears when the display is too small - Changed: Displays automatically change the type when a display link is connected (can be deactivated in the config if there are any problems) - Fixed: Crash when using invalid placeholders - Fixed: Static Text parsing is incorrect in some cases (example: the time placeholder shows the hour only) - Fixed: Prioritized Destination Instruction does not work if a train is waiting at the targeted station - Fixed: Crash when using a clipboard or name tag - Fixed: Focus platform displays show the wrong platform on platform changes - Fixed: The Schedule Title is not used correctly - Fixed: The line texture on passenger information displays with schedule overlaps with the time string - Fixed: Sometimes Schedule Title is not recognized as a custom title - Fixed: The entries in the Schedule Section Settings Screen are not sorted alphabetically - Fixed: Train Line Colors cannot be used on Train Destination and Passenger Information Displays - Fixed: Crash when incorrect data is loaded - Fixed: Displays can display the wrong destination - Fixed: Schedule sections are not changed [Create 6 versions] - Fixed: Train Displays show nothing in some sections - Fixed: Train displays sometimes flicker between an empty schedule and "Out of service" - Fixed: Text Placement on Passenger Information Displays with Schedule is off in some cases - Fixed: Departure boards only show information at the bottom when the first train of the list has some information - Fixed: The Schedule Board in the navigator also shows departures when the train stops at a terminus station and including Start of Next Section is deactivated - Fixed: Crash if a canceled train should be displayed on a platform table display - Fixed: Trains change the stopovers, the destination and the schedule overview before it has reached the previous destination - Fixed: Arrivals are not displayed correctly on displays if the previous Schedule Section has Include start of next section activated - Fixed: Scrolling text platform displays show trains that end at that station and then continue into a deactivated section - Fixed: Detailed Train Destination displays show the wrong origin or the wrong destination - Fixed: Displays do not change reliably to "Out of service" while a train is moving into a deactivated Schedule Section - Fixed: Trains that stop at blacklisted stations are still shown on the displays - Fixed: The content of Advanced Displays is not rendered when the upper left corner is outside the camera [1.21] - Fixed: The background of all GUIs is not darkened [1.21] - Removed: Unused Events - Updated translations

- Added: The navigator can be placed on lecterns - Added: Advanced displays can now also display data from other sources - Added: New information texts are shown on displays when a train is at the terminus (e.g. "Do not board", "This train terminates here") - Changed: The "Time: " prefix disappears when the display is too small - Changed: Displays automatically change the type when a display link is connected (can be deactivated in the config if there are any problems) - Fixed: Crash when using invalid placeholders - Fixed: Static Text parsing is incorrect in some cases (example: the time placeholder shows the hour only) - Fixed: Prioritized Destination Instruction does not work if a train is waiting at the targeted station - Fixed: Crash when using a clipboard or name tag - Fixed: Focus platform displays show the wrong platform on platform changes - Fixed: The Schedule Title is not used correctly - Fixed: The line texture on passenger information displays with schedule overlaps with the time string - Fixed: Sometimes Schedule Title is not recognized as a custom title - Fixed: The entries in the Schedule Section Settings Screen are not sorted alphabetically - Fixed: Train Line Colors cannot be used on Train Destination and Passenger Information Displays - Fixed: Crash when incorrect data is loaded - Fixed: Displays can display the wrong destination - Fixed: Schedule sections are not changed [Create 6 versions] - Fixed: Train Displays show nothing in some sections - Fixed: Train displays sometimes flicker between an empty schedule and "Out of service" - Fixed: Text Placement on Passenger Information Displays with Schedule is off in some cases - Fixed: Departure boards only show information at the bottom when the first train of the list has some information - Fixed: The Schedule Board in the navigator also shows departures when the train stops at a terminus station and including Start of Next Section is deactivated - Fixed: Crash if a canceled train should be displayed on a platform table display - Fixed: Trains change the stopovers, the destination and the schedule overview before it has reached the previous destination - Fixed: Arrivals are not displayed correctly on displays if the previous Schedule Section has Include start of next section activated - Fixed: Scrolling text platform displays show trains that end at that station and then continue into a deactivated section - Fixed: Detailed Train Destination displays show the wrong origin or the wrong destination - Fixed: Displays do not change reliably to "Out of service" while a train is moving into a deactivated Schedule Section - Fixed: Trains that stop at blacklisted stations are still shown on the displays - Fixed: The content of Advanced Displays is not rendered when the upper left corner is outside the camera [1.21] - Fixed: The background of all GUIs is not darkened [1.21] - Removed: Unused Events - Updated translations

- Added: The navigator can be placed on lecterns - Added: Advanced displays can now also display data from other sources - Added: New information texts are shown on displays when a train is at the terminus (e.g. "Do not board", "This train terminates here") - Changed: The "Time: " prefix disappears when the display is too small - Changed: Displays automatically change the type when a display link is connected (can be deactivated in the config if there are any problems) - Fixed: Crash when using invalid placeholders - Fixed: Static Text parsing is incorrect in some cases (example: the time placeholder shows the hour only) - Fixed: Prioritized Destination Instruction does not work if a train is waiting at the targeted station - Fixed: Crash when using a clipboard or name tag - Fixed: Focus platform displays show the wrong platform on platform changes - Fixed: The Schedule Title is not used correctly - Fixed: The line texture on passenger information displays with schedule overlaps with the time string - Fixed: Sometimes Schedule Title is not recognized as a custom title - Fixed: The entries in the Schedule Section Settings Screen are not sorted alphabetically - Fixed: Train Line Colors cannot be used on Train Destination and Passenger Information Displays - Fixed: Crash when incorrect data is loaded - Fixed: Displays can display the wrong destination - Fixed: Schedule sections are not changed [Create 6 versions] - Fixed: Train Displays show nothing in some sections - Fixed: Train displays sometimes flicker between an empty schedule and "Out of service" - Fixed: Text Placement on Passenger Information Displays with Schedule is off in some cases - Fixed: Departure boards only show information at the bottom when the first train of the list has some information - Fixed: The Schedule Board in the navigator also shows departures when the train stops at a terminus station and including Start of Next Section is deactivated - Fixed: Crash if a canceled train should be displayed on a platform table display - Fixed: Trains change the stopovers, the destination and the schedule overview before it has reached the previous destination - Fixed: Arrivals are not displayed correctly on displays if the previous Schedule Section has Include start of next section activated - Fixed: Scrolling text platform displays show trains that end at that station and then continue into a deactivated section - Fixed: Detailed Train Destination displays show the wrong origin or the wrong destination - Fixed: Displays do not change reliably to "Out of service" while a train is moving into a deactivated Schedule Section - Fixed: Trains that stop at blacklisted stations are still shown on the displays - Fixed: The content of Advanced Displays is not rendered when the upper left corner is outside the camera [1.21] - Fixed: The background of all GUIs is not darkened [1.21] - Removed: Unused Events - Updated translations

- Added: The navigator can be placed on lecterns - Added: Advanced displays can now also display data from other sources - Added: New information texts are shown on displays when a train is at the terminus (e.g. "Do not board", "This train terminates here") - Changed: The "Time: " prefix disappears when the display is too small - Changed: Displays automatically change the type when a display link is connected (can be deactivated in the config if there are any problems) - Fixed: Crash when using invalid placeholders - Fixed: Static Text parsing is incorrect in some cases (example: the time placeholder shows the hour only) - Fixed: Prioritized Destination Instruction does not work if a train is waiting at the targeted station - Fixed: Crash when using a clipboard or name tag - Fixed: Focus platform displays show the wrong platform on platform changes - Fixed: The Schedule Title is not used correctly - Fixed: The line texture on passenger information displays with schedule overlaps with the time string - Fixed: Sometimes Schedule Title is not recognized as a custom title - Fixed: The entries in the Schedule Section Settings Screen are not sorted alphabetically - Fixed: Train Line Colors cannot be used on Train Destination and Passenger Information Displays - Fixed: Crash when incorrect data is loaded - Fixed: Displays can display the wrong destination - Fixed: Schedule sections are not changed [Create 6 versions] - Fixed: Train Displays show nothing in some sections - Fixed: Train displays sometimes flicker between an empty schedule and "Out of service" - Fixed: Text Placement on Passenger Information Displays with Schedule is off in some cases - Fixed: Departure boards only show information at the bottom when the first train of the list has some information - Fixed: The Schedule Board in the navigator also shows departures when the train stops at a terminus station and including Start of Next Section is deactivated - Fixed: Crash if a canceled train should be displayed on a platform table display - Fixed: Trains change the stopovers, the destination and the schedule overview before it has reached the previous destination - Fixed: Arrivals are not displayed correctly on displays if the previous Schedule Section has Include start of next section activated - Fixed: Scrolling text platform displays show trains that end at that station and then continue into a deactivated section - Fixed: Detailed Train Destination displays show the wrong origin or the wrong destination - Fixed: Displays do not change reliably to "Out of service" while a train is moving into a deactivated Schedule Section - Fixed: Trains that stop at blacklisted stations are still shown on the displays - Fixed: The content of Advanced Displays is not rendered when the upper left corner is outside the camera [1.21] - Fixed: The background of all GUIs is not darkened [1.21] - Removed: Unused Events - Updated translations

- Added: The navigator can be placed on lecterns - Added: Advanced displays can now also display data from other sources - Added: New information texts are shown on displays when a train is at the terminus (e.g. "Do not board", "This train terminates here") - Changed: The "Time: " prefix disappears when the display is too small - Changed: Displays automatically change the type when a display link is connected (can be deactivated in the config if there are any problems) - Fixed: Crash when using invalid placeholders - Fixed: Static Text parsing is incorrect in some cases (example: the time placeholder shows the hour only) - Fixed: Prioritized Destination Instruction does not work if a train is waiting at the targeted station - Fixed: Crash when using a clipboard or name tag - Fixed: Focus platform displays show the wrong platform on platform changes - Fixed: The Schedule Title is not used correctly - Fixed: The line texture on passenger information displays with schedule overlaps with the time string - Fixed: Sometimes Schedule Title is not recognized as a custom title - Fixed: The entries in the Schedule Section Settings Screen are not sorted alphabetically - Fixed: Train Line Colors cannot be used on Train Destination and Passenger Information Displays - Fixed: Crash when incorrect data is loaded - Fixed: Displays can display the wrong destination - Fixed: Schedule sections are not changed [Create 6 versions] - Fixed: Train Displays show nothing in some sections - Fixed: Train displays sometimes flicker between an empty schedule and "Out of service" - Fixed: Text Placement on Passenger Information Displays with Schedule is off in some cases - Fixed: Departure boards only show information at the bottom when the first train of the list has some information - Fixed: The Schedule Board in the navigator also shows departures when the train stops at a terminus station and including Start of Next Section is deactivated - Fixed: Crash if a canceled train should be displayed on a platform table display - Fixed: Trains change the stopovers, the destination and the schedule overview before it has reached the previous destination - Fixed: Arrivals are not displayed correctly on displays if the previous Schedule Section has Include start of next section activated - Fixed: Scrolling text platform displays show trains that end at that station and then continue into a deactivated section - Fixed: Detailed Train Destination displays show the wrong origin or the wrong destination - Fixed: Displays do not change reliably to "Out of service" while a train is moving into a deactivated Schedule Section - Fixed: Trains that stop at blacklisted stations are still shown on the displays - Fixed: The content of Advanced Displays is not rendered when the upper left corner is outside the camera [1.21] - Fixed: The background of all GUIs is not darkened [1.21] - Removed: Unused Events - Updated translations

- Fixed: Recipes not working

- Added: Time of Day Condition Support - Added: Displays always show trains with wildcards - Added: Displays can show platform changes - Added: Prioritized Destination Instruction - Similar to wildcards, but with better control - Create a list of priorities with all the stations where the train can stop - The entries can be reordered in the GUI with drag and drop - Some options for controlling what motivates a train to choose another station - Added: Permissions - For each entry in the Global Settings (Tag, Train Lines, etc.), the permissions can now be changed by the creator. Exception: train blacklist, station blacklist - Locked entries can only be changed by the owner or Trusted Players - The ownership can be transferred to other players or to the server - Operators can manage servers entries and entries from other players (even if locked) - If players don't have the required permission to manage the Global Settings in general, they can still view them in read only mode - Added: Static Text Display Type - Custom texts can be written on displays - The `Simple Text` option only shows a simple one-line text - The `Rich Text` option allows up to 50 text components and offers all customization options (Position, Size, etc) - Texts can be put on displays by using Nametags or Clipboards - Plain text or the JSON Text Component Format can be used and therefore all formatting options (bold, italic, etc) - Added: Player can add multiple entries at once in the Global Settings by using wildcards - A string with `*` adds all elements that fit this pattern (e.g. `Station *` adds `Station 1`,` Station 2b`, ... to the list) - In the Station Tag Settings, if the station and platform string both contain wildcards, the text of the placeholder from the station string is inserted into the placeholder of the platform string. (`Station *` and platform `Pl. *` will add `Station 1`/` Pl. 1`, `Station 2b`/` Pl. 2b`) - If multiple wildcards are used in the station and platform string, the texts of the placeholders of the station string are inserted in the same order into the placeholders of the platform string. - If the platform string has less wildcards than the station string, all remaining text parts from the station string are inserted into the last placeholder of the platform string. - If the platform string has more wildcards than the station string, all remaining placeholders in the platform string are deleted. - Added: Filter for arrival, departure and both in the Schedule Board. - Added: The previously searched routes are displayed on the start page of the navigator - Changed: Train Station Clock - New model and texture - By clicking on a clock with another clock item, changes the existing clock to display the time on all four sides. - Added SHIFT description in the inventory - Clocks now always drop itself, even without Silk Touch - Changed: Navigator - The current date is displayed on the navigator while holding it in your hand - With the item NBT tag `int: backgroundId`, a custom background from a resource pack can be used. - Renamed to "Navigator" (was: "Create Railways Navigator") - Changed: Train Lines and Train Groups can now be renamed - Changed: Train Prediction calculations have been improved - Changed: In the Train Separation Condition, the time can now be defined as in-game or real life time. - Changed: Train Groups were renamed "Train Categories" - Changed: The input fields for minimum and default delay in the Dynamic Delay GUI have been swapped - Changed: New confirmation dialog before an entry in the Global Settings is deleted - Fixed: A route section is declared invalid if the previous section is deactivated - Fixed: Navigation costs are calculated incorrectly, which may lead to inefficient routes - Fixed: Train Separation Condition does not work with wildcards - Fixed: Displays show arrival time while the train is already waiting at a train station - Fixed: Displays show the station name instead of the station tag - Fixed: Schedule board shows the wrong station from which the train came - Fixed: On the Schedule Board, the Schedule Section of arrivals is always the first section in the train schedule - Fixed: The Schedule board sometimes shows the wrong train line - Fixed: The information about when a station tag was last edited, is incorrect - Fixed: The Train Text Components setting of the Advanced Displays is not copied - Minimum Create version is now 0.5.1.f ### Please note! ⚠️ Some Addons depending on CRN might break with this update. ⚠️ This update is available for versions 1.18 (Create 0.5.1.f+), 1.19 (Create 0.5.1.f+), 1.20 (Create 0.5.1f+, Create 6.0.4+) and 1.21 (Create 6.0.4+). Pay attention to the correct version for 1.20: The Create 6 compatible version includes `C6` in the version name! ⚠️ Version Support: [1.18, 1.19]: These versions are no longer supported after the first full release (v1.0) from CRN; [1.20]: Create versions before 6.0.0 are no longer supported in the future, only Create 6.0.4+ ⚠️ The Fabric versions for Create 6 in 1.20 and 1.21 will be available after the update of Create Fabric! ⚠️ Display Links will loose their Advanced Display Settings when upgrading to Create 6! ⚠️ Please backup your world before installing this update!

- Added: Time of Day Condition Support - Added: Displays always show trains with wildcards - Added: Displays can show platform changes - Added: Prioritized Destination Instruction - Similar to wildcards, but with better control - Create a list of priorities with all the stations where the train can stop - The entries can be reordered in the GUI with drag and drop - Some options for controlling what motivates a train to choose another station - Added: Permissions - For each entry in the Global Settings (Tag, Train Lines, etc.), the permissions can now be changed by the creator. Exception: train blacklist, station blacklist - Locked entries can only be changed by the owner or Trusted Players - The ownership can be transferred to other players or to the server - Operators can manage servers entries and entries from other players (even if locked) - If players don't have the required permission to manage the Global Settings in general, they can still view them in read only mode - Added: Static Text Display Type - Custom texts can be written on displays - The `Simple Text` option only shows a simple one-line text - The `Rich Text` option allows up to 50 text components and offers all customization options (Position, Size, etc) - Texts can be put on displays by using Nametags or Clipboards - Plain text or the JSON Text Component Format can be used and therefore all formatting options (bold, italic, etc) - Added: Player can add multiple entries at once in the Global Settings by using wildcards - A string with `*` adds all elements that fit this pattern (e.g. `Station *` adds `Station 1`,` Station 2b`, ... to the list) - In the Station Tag Settings, if the station and platform string both contain wildcards, the text of the placeholder from the station string is inserted into the placeholder of the platform string. (`Station *` and platform `Pl. *` will add `Station 1`/` Pl. 1`, `Station 2b`/` Pl. 2b`) - If multiple wildcards are used in the station and platform string, the texts of the placeholders of the station string are inserted in the same order into the placeholders of the platform string. - If the platform string has less wildcards than the station string, all remaining text parts from the station string are inserted into the last placeholder of the platform string. - If the platform string has more wildcards than the station string, all remaining placeholders in the platform string are deleted. - Added: Filter for arrival, departure and both in the Schedule Board. - Added: The previously searched routes are displayed on the start page of the navigator - Changed: Train Station Clock - New model and texture - By clicking on a clock with another clock item, changes the existing clock to display the time on all four sides. - Added SHIFT description in the inventory - Clocks now always drop itself, even without Silk Touch - Changed: Navigator - The current date is displayed on the navigator while holding it in your hand - With the item NBT tag `int: backgroundId`, a custom background from a resource pack can be used. - Renamed to "Navigator" (was: "Create Railways Navigator") - Changed: Train Lines and Train Groups can now be renamed - Changed: Train Prediction calculations have been improved - Changed: In the Train Separation Condition, the time can now be defined as in-game or real life time. - Changed: Train Groups were renamed "Train Categories" - Changed: The input fields for minimum and default delay in the Dynamic Delay GUI have been swapped - Changed: New confirmation dialog before an entry in the Global Settings is deleted - Fixed: A route section is declared invalid if the previous section is deactivated - Fixed: Navigation costs are calculated incorrectly, which may lead to inefficient routes - Fixed: Train Separation Condition does not work with wildcards - Fixed: Displays show arrival time while the train is already waiting at a train station - Fixed: Displays show the station name instead of the station tag - Fixed: Schedule board shows the wrong station from which the train came - Fixed: On the Schedule Board, the Schedule Section of arrivals is always the first section in the train schedule - Fixed: The Schedule board sometimes shows the wrong train line - Fixed: The information about when a station tag was last edited, is incorrect - Fixed: The Train Text Components setting of the Advanced Displays is not copied - Minimum Create version is now 0.5.1.f ### Please note! ⚠️ Some Addons depending on CRN might break with this update. ⚠️ This update is available for versions 1.18 (Create 0.5.1.f+), 1.19 (Create 0.5.1.f+), 1.20 (Create 0.5.1f+, Create 6.0.4+) and 1.21 (Create 6.0.4+). Pay attention to the correct version for 1.20: The Create 6 compatible version includes `C6` in the version name! ⚠️ Version Support: [1.18, 1.19]: These versions are no longer supported after the first full release (v1.0) from CRN; [1.20]: Create versions before 6.0.0 are no longer supported in the future, only Create 6.0.4+ ⚠️ The Fabric versions for Create 6 in 1.20 and 1.21 will be available after the update of Create Fabric! ⚠️ Display Links will loose their Advanced Display Settings when upgrading to Create 6! ⚠️ Please backup your world before installing this update!

# NOT COMPATIBLE WITH CREATE 6! ## Please use the other CRN 1.20.1 version for Create 6. - Added: Time of Day Condition Support - Added: Displays always show trains with wildcards - Added: Displays can show platform changes - Added: Prioritized Destination Instruction   - Similar to wildcards, but with better control   - Create a list of priorities with all the stations where the train can stop   - The entries can be reordered in the GUI with drag and drop   - Some options for controlling what motivates a train to choose another station - Added: Permissions   - For each entry in the Global Settings (Tag, Train Lines, etc.), the permissions can now be changed by the creator. Exception: train blacklist, station blacklist   - Locked entries can only be changed by the owner or Trusted Players   - The ownership can be transferred to other players or to the server   - Operators can manage servers entries and entries from other players (even if locked)   - If players don't have the required permission to manage the Global Settings in general, they can still view them in read only mode - Added: Static Text Display Type   - Custom texts can be written on displays     - The `Simple Text` option only shows a simple one-line text     - The `Rich Text` option allows up to 50 text components and offers all customization options (Position, Size, etc)   - Texts can be put on displays by using Nametags or Clipboards   - Plain text or the JSON Text Component Format can be used and therefore all formatting options (bold, italic, etc) - Added: Player can add multiple entries at once in the Global Settings by using wildcards   - A string with `*` adds all elements that fit this pattern (e.g. `Station *` adds `Station 1`,` Station 2b`, ... to the list)   - In the Station Tag Settings, if the station and platform string both contain wildcards, the text of the placeholder from the station string is inserted into the placeholder of the platform string. (`Station *` and platform `Pl. *` will add `Station 1`/` Pl. 1`, `Station 2b`/` Pl. 2b`)   - If multiple wildcards are used in the station and platform string, the texts of the placeholders of the station string are inserted in the same order into the placeholders of the platform string.   - If the platform string has less wildcards than the station string, all remaining text parts from the station string are inserted into the last placeholder of the platform string.   - If the platform string has more wildcards than the station string, all remaining placeholders in the platform string are deleted. - Added: Filter for arrival, departure and both in the Schedule Board. - Added: The previously searched routes are displayed on the start page of the navigator - Changed: Train Station Clock   - New model and texture   - By clicking on a clock with another clock item, changes the existing clock to display the time on all four sides.   - Added SHIFT description in the inventory   - Clocks now always drop itself, even without Silk Touch - Changed: Navigator   - The current date is displayed on the navigator while holding it in your hand   - With the item NBT tag `int: backgroundId`, a custom background from a resource pack can be used.   - Renamed to "Navigator" (was: "Create Railways Navigator") - Changed: Train Lines and Train Groups can now be renamed - Changed: Train Prediction calculations have been improved - Changed: In the Train Separation Condition, the time can now be defined as in-game or real life time. - Changed: Train Groups were renamed "Train Categories" - Changed: The input fields for minimum and default delay in the Dynamic Delay GUI have been swapped - Changed: New confirmation dialog before an entry in the Global Settings is deleted - Fixed: A route section is declared invalid if the previous section is deactivated - Fixed: Navigation costs are calculated incorrectly, which may lead to inefficient routes - Fixed: Train Separation Condition does not work with wildcards - Fixed: Displays show arrival time while the train is already waiting at a train station - Fixed: Displays show the station name instead of the station tag - Fixed: Schedule board shows the wrong station from which the train came - Fixed: On the Schedule Board, the Schedule Section of arrivals is always the first section in the train schedule - Fixed: The Schedule board sometimes shows the wrong train line - Fixed: The information about when a station tag was last edited, is incorrect - Fixed: The Train Text Components setting of the Advanced Displays is not copied - Minimum Create version is now 0.5.1.f ### Please note! ⚠️ Some Addons depending on CRN might break with this update. ⚠️ This update is available for versions 1.18 (Create 0.5.1.f+), 1.19 (Create 0.5.1.f+), 1.20 (Create 0.5.1f+, Create 6.0.4+) and 1.21 (Create 6.0.4+). Pay attention to the correct version for 1.20: The Create 6 compatible version includes `C6` in the version name! ⚠️ Version Support: [1.18, 1.19]: These versions are no longer supported after the first full release (v1.0) from CRN; [1.20]: Create versions before 6.0.0 are no longer supported in the future, only Create 6.0.4+ ⚠️ The Fabric versions for Create 6 in 1.20 and 1.21 will be available after the update of Create Fabric! ⚠️ Display Links will loose their Advanced Display Settings when upgrading to Create 6! ⚠️ Please backup your world before installing this update!

- Added: Time of Day Condition Support - Added: Displays always show trains with wildcards - Added: Displays can show platform changes - Added: Prioritized Destination Instruction - Similar to wildcards, but with better control - Create a list of priorities with all the stations where the train can stop - The entries can be reordered in the GUI with drag and drop - Some options for controlling what motivates a train to choose another station - Added: Permissions - For each entry in the Global Settings (Tag, Train Lines, etc.), the permissions can now be changed by the creator. Exception: train blacklist, station blacklist - Locked entries can only be changed by the owner or Trusted Players - The ownership can be transferred to other players or to the server - Operators can manage servers entries and entries from other players (even if locked) - If players don't have the required permission to manage the Global Settings in general, they can still view them in read only mode - Added: Static Text Display Type - Custom texts can be written on displays - The `Simple Text` option only shows a simple one-line text - The `Rich Text` option allows up to 50 text components and offers all customization options (Position, Size, etc) - Texts can be put on displays by using Nametags or Clipboards - Plain text or the JSON Text Component Format can be used and therefore all formatting options (bold, italic, etc) - Added: Player can add multiple entries at once in the Global Settings by using wildcards - A string with `*` adds all elements that fit this pattern (e.g. `Station *` adds `Station 1`,` Station 2b`, ... to the list) - In the Station Tag Settings, if the station and platform string both contain wildcards, the text of the placeholder from the station string is inserted into the placeholder of the platform string. (`Station *` and platform `Pl. *` will add `Station 1`/` Pl. 1`, `Station 2b`/` Pl. 2b`) - If multiple wildcards are used in the station and platform string, the texts of the placeholders of the station string are inserted in the same order into the placeholders of the platform string. - If the platform string has less wildcards than the station string, all remaining text parts from the station string are inserted into the last placeholder of the platform string. - If the platform string has more wildcards than the station string, all remaining placeholders in the platform string are deleted. - Added: Filter for arrival, departure and both in the Schedule Board. - Added: The previously searched routes are displayed on the start page of the navigator - Changed: Train Station Clock - New model and texture - By clicking on a clock with another clock item, changes the existing clock to display the time on all four sides. - Added SHIFT description in the inventory - Clocks now always drop itself, even without Silk Touch - Changed: Navigator - The current date is displayed on the navigator while holding it in your hand - With the item NBT tag `int: backgroundId`, a custom background from a resource pack can be used. - Renamed to "Navigator" (was: "Create Railways Navigator") - Changed: Train Lines and Train Groups can now be renamed - Changed: Train Prediction calculations have been improved - Changed: In the Train Separation Condition, the time can now be defined as in-game or real life time. - Changed: Train Groups were renamed "Train Categories" - Changed: The input fields for minimum and default delay in the Dynamic Delay GUI have been swapped - Changed: New confirmation dialog before an entry in the Global Settings is deleted - Fixed: A route section is declared invalid if the previous section is deactivated - Fixed: Navigation costs are calculated incorrectly, which may lead to inefficient routes - Fixed: Train Separation Condition does not work with wildcards - Fixed: Displays show arrival time while the train is already waiting at a train station - Fixed: Displays show the station name instead of the station tag - Fixed: Schedule board shows the wrong station from which the train came - Fixed: On the Schedule Board, the Schedule Section of arrivals is always the first section in the train schedule - Fixed: The Schedule board sometimes shows the wrong train line - Fixed: The information about when a station tag was last edited, is incorrect - Fixed: The Train Text Components setting of the Advanced Displays is not copied - Minimum Create version is now 0.5.1.f ### Please note! ⚠️ Some Addons depending on CRN might break with this update. ⚠️ This update is available for versions 1.18 (Create 0.5.1.f+), 1.19 (Create 0.5.1.f+), 1.20 (Create 0.5.1f+, Create 6.0.4+) and 1.21 (Create 6.0.4+). Pay attention to the correct version for 1.20: The Create 6 compatible version includes `C6` in the version name! ⚠️ Version Support: [1.18, 1.19]: These versions are no longer supported after the first full release (v1.0) from CRN; [1.20]: Create versions before 6.0.0 are no longer supported in the future, only Create 6.0.4+ ⚠️ The Fabric versions for Create 6 in 1.20 and 1.21 will be available after the update of Create Fabric! ⚠️ Display Links will loose their Advanced Display Settings when upgrading to Create 6! ⚠️ Please backup your world before installing this update!

- Added: Time of Day Condition Support - Added: Displays always show trains with wildcards - Added: Displays can show platform changes - Added: Prioritized Destination Instruction - Similar to wildcards, but with better control - Create a list of priorities with all the stations where the train can stop - The entries can be reordered in the GUI with drag and drop - Some options for controlling what motivates a train to choose another station - Added: Permissions - For each entry in the Global Settings (Tag, Train Lines, etc.), the permissions can now be changed by the creator. Exception: train blacklist, station blacklist - Locked entries can only be changed by the owner or Trusted Players - The ownership can be transferred to other players or to the server - Operators can manage servers entries and entries from other players (even if locked) - If players don't have the required permission to manage the Global Settings in general, they can still view them in read only mode - Added: Static Text Display Type - Custom texts can be written on displays - The `Simple Text` option only shows a simple one-line text - The `Rich Text` option allows up to 50 text components and offers all customization options (Position, Size, etc) - Texts can be put on displays by using Nametags or Clipboards - Plain text or the JSON Text Component Format can be used and therefore all formatting options (bold, italic, etc) - Added: Player can add multiple entries at once in the Global Settings by using wildcards - A string with `*` adds all elements that fit this pattern (e.g. `Station *` adds `Station 1`,` Station 2b`, ... to the list) - In the Station Tag Settings, if the station and platform string both contain wildcards, the text of the placeholder from the station string is inserted into the placeholder of the platform string. (`Station *` and platform `Pl. *` will add `Station 1`/` Pl. 1`, `Station 2b`/` Pl. 2b`) - If multiple wildcards are used in the station and platform string, the texts of the placeholders of the station string are inserted in the same order into the placeholders of the platform string. - If the platform string has less wildcards than the station string, all remaining text parts from the station string are inserted into the last placeholder of the platform string. - If the platform string has more wildcards than the station string, all remaining placeholders in the platform string are deleted. - Added: Filter for arrival, departure and both in the Schedule Board. - Added: The previously searched routes are displayed on the start page of the navigator - Changed: Train Station Clock - New model and texture - By clicking on a clock with another clock item, changes the existing clock to display the time on all four sides. - Added SHIFT description in the inventory - Clocks now always drop itself, even without Silk Touch - Changed: Navigator - The current date is displayed on the navigator while holding it in your hand - With the item NBT tag `int: backgroundId`, a custom background from a resource pack can be used. - Renamed to "Navigator" (was: "Create Railways Navigator") - Changed: Train Lines and Train Groups can now be renamed - Changed: Train Prediction calculations have been improved - Changed: In the Train Separation Condition, the time can now be defined as in-game or real life time. - Changed: Train Groups were renamed "Train Categories" - Changed: The input fields for minimum and default delay in the Dynamic Delay GUI have been swapped - Changed: New confirmation dialog before an entry in the Global Settings is deleted - Fixed: A route section is declared invalid if the previous section is deactivated - Fixed: Navigation costs are calculated incorrectly, which may lead to inefficient routes - Fixed: Train Separation Condition does not work with wildcards - Fixed: Displays show arrival time while the train is already waiting at a train station - Fixed: Displays show the station name instead of the station tag - Fixed: Schedule board shows the wrong station from which the train came - Fixed: On the Schedule Board, the Schedule Section of arrivals is always the first section in the train schedule - Fixed: The Schedule board sometimes shows the wrong train line - Fixed: The information about when a station tag was last edited, is incorrect - Fixed: The Train Text Components setting of the Advanced Displays is not copied - Minimum Create version is now 0.5.1.f ### Please note! ⚠️ Some Addons depending on CRN might break with this update. ⚠️ This update is available for versions 1.18 (Create 0.5.1.f+), 1.19 (Create 0.5.1.f+), 1.20 (Create 0.5.1f+, Create 6.0.4+) and 1.21 (Create 6.0.4+). Pay attention to the correct version for 1.20: The Create 6 compatible version includes `C6` in the version name! ⚠️ Version Support: [1.18, 1.19]: These versions are no longer supported after the first full release (v1.0) from CRN; [1.20]: Create versions before 6.0.0 are no longer supported in the future, only Create 6.0.4+ ⚠️ The Fabric versions for Create 6 in 1.20 and 1.21 will be available after the update of Create Fabric! ⚠️ Display Links will loose their Advanced Display Settings when upgrading to Create 6! ⚠️ Please backup your world before installing this update!

- Added: Time of Day Condition Support - Added: Displays always show trains with wildcards - Added: Displays can show platform changes - Added: Prioritized Destination Instruction - Similar to wildcards, but with better control - Create a list of priorities with all the stations where the train can stop - The entries can be reordered in the GUI with drag and drop - Some options for controlling what motivates a train to choose another station - Added: Permissions - For each entry in the Global Settings (Tag, Train Lines, etc.), the permissions can now be changed by the creator. Exception: train blacklist, station blacklist - Locked entries can only be changed by the owner or Trusted Players - The ownership can be transferred to other players or to the server - Operators can manage servers entries and entries from other players (even if locked) - If players don't have the required permission to manage the Global Settings in general, they can still view them in read only mode - Added: Static Text Display Type - Custom texts can be written on displays - The `Simple Text` option only shows a simple one-line text - The `Rich Text` option allows up to 50 text components and offers all customization options (Position, Size, etc) - Texts can be put on displays by using Nametags or Clipboards - Plain text or the JSON Text Component Format can be used and therefore all formatting options (bold, italic, etc) - Added: Player can add multiple entries at once in the Global Settings by using wildcards - A string with `*` adds all elements that fit this pattern (e.g. `Station *` adds `Station 1`,` Station 2b`, ... to the list) - In the Station Tag Settings, if the station and platform string both contain wildcards, the text of the placeholder from the station string is inserted into the placeholder of the platform string. (`Station *` and platform `Pl. *` will add `Station 1`/` Pl. 1`, `Station 2b`/` Pl. 2b`) - If multiple wildcards are used in the station and platform string, the texts of the placeholders of the station string are inserted in the same order into the placeholders of the platform string. - If the platform string has less wildcards than the station string, all remaining text parts from the station string are inserted into the last placeholder of the platform string. - If the platform string has more wildcards than the station string, all remaining placeholders in the platform string are deleted. - Added: Filter for arrival, departure and both in the Schedule Board. - Added: The previously searched routes are displayed on the start page of the navigator - Changed: Train Station Clock - New model and texture - By clicking on a clock with another clock item, changes the existing clock to display the time on all four sides. - Added SHIFT description in the inventory - Clocks now always drop itself, even without Silk Touch - Changed: Navigator - The current date is displayed on the navigator while holding it in your hand - With the item NBT tag `int: backgroundId`, a custom background from a resource pack can be used. - Renamed to "Navigator" (was: "Create Railways Navigator") - Changed: Train Lines and Train Groups can now be renamed - Changed: Train Prediction calculations have been improved - Changed: In the Train Separation Condition, the time can now be defined as in-game or real life time. - Changed: Train Groups were renamed "Train Categories" - Changed: The input fields for minimum and default delay in the Dynamic Delay GUI have been swapped - Changed: New confirmation dialog before an entry in the Global Settings is deleted - Fixed: A route section is declared invalid if the previous section is deactivated - Fixed: Navigation costs are calculated incorrectly, which may lead to inefficient routes - Fixed: Train Separation Condition does not work with wildcards - Fixed: Displays show arrival time while the train is already waiting at a train station - Fixed: Displays show the station name instead of the station tag - Fixed: Schedule board shows the wrong station from which the train came - Fixed: On the Schedule Board, the Schedule Section of arrivals is always the first section in the train schedule - Fixed: The Schedule board sometimes shows the wrong train line - Fixed: The information about when a station tag was last edited, is incorrect - Fixed: The Train Text Components setting of the Advanced Displays is not copied - Minimum Create version is now 0.5.1.f ### Please note! ⚠️ Some Addons depending on CRN might break with this update. ⚠️ This update is available for versions 1.18 (Create 0.5.1.f+), 1.19 (Create 0.5.1.f+), 1.20 (Create 0.5.1f+, Create 6.0.4+) and 1.21 (Create 6.0.4+). Pay attention to the correct version for 1.20: The Create 6 compatible version includes `C6` in the version name! ⚠️ Version Support: [1.18, 1.19]: These versions are no longer supported after the first full release (v1.0) from CRN; [1.20]: Create versions before 6.0.0 are no longer supported in the future, only Create 6.0.4+ ⚠️ The Fabric versions for Create 6 in 1.20 and 1.21 will be available after the update of Create Fabric! ⚠️ Display Links will loose their Advanced Display Settings when upgrading to Create 6! ⚠️ Please backup your world before installing this update!

- Added: Time of Day Condition Support - Added: Displays always show trains with wildcards - Added: Displays can show platform changes - Added: Prioritized Destination Instruction - Similar to wildcards, but with better control - Create a list of priorities with all the stations where the train can stop - The entries can be reordered in the GUI with drag and drop - Some options for controlling what motivates a train to choose another station - Added: Permissions - For each entry in the Global Settings (Tag, Train Lines, etc.), the permissions can now be changed by the creator. Exception: train blacklist, station blacklist - Locked entries can only be changed by the owner or Trusted Players - The ownership can be transferred to other players or to the server - Operators can manage servers entries and entries from other players (even if locked) - If players don't have the required permission to manage the Global Settings in general, they can still view them in read only mode - Added: Static Text Display Type - Custom texts can be written on displays - The `Simple Text` option only shows a simple one-line text - The `Rich Text` option allows up to 50 text components and offers all customization options (Position, Size, etc) - Texts can be put on displays by using Nametags or Clipboards - Plain text or the JSON Text Component Format can be used and therefore all formatting options (bold, italic, etc) - Added: Player can add multiple entries at once in the Global Settings by using wildcards - A string with `*` adds all elements that fit this pattern (e.g. `Station *` adds `Station 1`,` Station 2b`, ... to the list) - In the Station Tag Settings, if the station and platform string both contain wildcards, the text of the placeholder from the station string is inserted into the placeholder of the platform string. (`Station *` and platform `Pl. *` will add `Station 1`/` Pl. 1`, `Station 2b`/` Pl. 2b`) - If multiple wildcards are used in the station and platform string, the texts of the placeholders of the station string are inserted in the same order into the placeholders of the platform string. - If the platform string has less wildcards than the station string, all remaining text parts from the station string are inserted into the last placeholder of the platform string. - If the platform string has more wildcards than the station string, all remaining placeholders in the platform string are deleted. - Added: Filter for arrival, departure and both in the Schedule Board. - Added: The previously searched routes are displayed on the start page of the navigator - Changed: Train Station Clock - New model and texture - By clicking on a clock with another clock item, changes the existing clock to display the time on all four sides. - Added SHIFT description in the inventory - Clocks now always drop itself, even without Silk Touch - Changed: Navigator - The current date is displayed on the navigator while holding it in your hand - With the item NBT tag `int: backgroundId`, a custom background from a resource pack can be used. - Renamed to "Navigator" (was: "Create Railways Navigator") - Changed: Train Lines and Train Groups can now be renamed - Changed: Train Prediction calculations have been improved - Changed: In the Train Separation Condition, the time can now be defined as in-game or real life time. - Changed: Train Groups were renamed "Train Categories" - Changed: The input fields for minimum and default delay in the Dynamic Delay GUI have been swapped - Changed: New confirmation dialog before an entry in the Global Settings is deleted - Fixed: A route section is declared invalid if the previous section is deactivated - Fixed: Navigation costs are calculated incorrectly, which may lead to inefficient routes - Fixed: Train Separation Condition does not work with wildcards - Fixed: Displays show arrival time while the train is already waiting at a train station - Fixed: Displays show the station name instead of the station tag - Fixed: Schedule board shows the wrong station from which the train came - Fixed: On the Schedule Board, the Schedule Section of arrivals is always the first section in the train schedule - Fixed: The Schedule board sometimes shows the wrong train line - Fixed: The information about when a station tag was last edited, is incorrect - Fixed: The Train Text Components setting of the Advanced Displays is not copied - Minimum Create version is now 0.5.1.f ### Please note! ⚠️ Some Addons depending on CRN might break with this update. ⚠️ This update is available for versions 1.18 (Create 0.5.1.f+), 1.19 (Create 0.5.1.f+), 1.20 (Create 0.5.1f+, Create 6.0.4+) and 1.21 (Create 6.0.4+). Pay attention to the correct version for 1.20: The Create 6 compatible version includes `C6` in the version name! ⚠️ Version Support: [1.18, 1.19]: These versions are no longer supported after the first full release (v1.0) from CRN; [1.20]: Create versions before 6.0.0 are no longer supported in the future, only Create 6.0.4+ ⚠️ The Fabric versions for Create 6 in 1.20 and 1.21 will be available after the update of Create Fabric! ⚠️ Display Links will loose their Advanced Display Settings when upgrading to Create 6! ⚠️ Please backup your world before installing this update!

- Added: Time of Day Condition Support - Added: Displays always show trains with wildcards - Added: Displays can show platform changes - Added: Prioritized Destination Instruction - Similar to wildcards, but with better control - Create a list of priorities with all the stations where the train can stop - The entries can be reordered in the GUI with drag and drop - Some options for controlling what motivates a train to choose another station - Added: Permissions - For each entry in the Global Settings (Tag, Train Lines, etc.), the permissions can now be changed by the creator. Exception: train blacklist, station blacklist - Locked entries can only be changed by the owner or Trusted Players - The ownership can be transferred to other players or to the server - Operators can manage servers entries and entries from other players (even if locked) - If players don't have the required permission to manage the Global Settings in general, they can still view them in read only mode - Added: Static Text Display Type - Custom texts can be written on displays - The `Simple Text` option only shows a simple one-line text - The `Rich Text` option allows up to 50 text components and offers all customization options (Position, Size, etc) - Texts can be put on displays by using Nametags or Clipboards - Plain text or the JSON Text Component Format can be used and therefore all formatting options (bold, italic, etc) - Added: Player can add multiple entries at once in the Global Settings by using wildcards - A string with `*` adds all elements that fit this pattern (e.g. `Station *` adds `Station 1`,` Station 2b`, ... to the list) - In the Station Tag Settings, if the station and platform string both contain wildcards, the text of the placeholder from the station string is inserted into the placeholder of the platform string. (`Station *` and platform `Pl. *` will add `Station 1`/` Pl. 1`, `Station 2b`/` Pl. 2b`) - If multiple wildcards are used in the station and platform string, the texts of the placeholders of the station string are inserted in the same order into the placeholders of the platform string. - If the platform string has less wildcards than the station string, all remaining text parts from the station string are inserted into the last placeholder of the platform string. - If the platform string has more wildcards than the station string, all remaining placeholders in the platform string are deleted. - Added: Filter for arrival, departure and both in the Schedule Board. - Added: The previously searched routes are displayed on the start page of the navigator - Changed: Train Station Clock - New model and texture - By clicking on a clock with another clock item, changes the existing clock to display the time on all four sides. - Added SHIFT description in the inventory - Clocks now always drop itself, even without Silk Touch - Changed: Navigator - The current date is displayed on the navigator while holding it in your hand - With the item NBT tag `int: backgroundId`, a custom background from a resource pack can be used. - Renamed to "Navigator" (was: "Create Railways Navigator") - Changed: Train Lines and Train Groups can now be renamed - Changed: Train Prediction calculations have been improved - Changed: In the Train Separation Condition, the time can now be defined as in-game or real life time. - Changed: Train Groups were renamed "Train Categories" - Changed: The input fields for minimum and default delay in the Dynamic Delay GUI have been swapped - Changed: New confirmation dialog before an entry in the Global Settings is deleted - Fixed: A route section is declared invalid if the previous section is deactivated - Fixed: Navigation costs are calculated incorrectly, which may lead to inefficient routes - Fixed: Train Separation Condition does not work with wildcards - Fixed: Displays show arrival time while the train is already waiting at a train station - Fixed: Displays show the station name instead of the station tag - Fixed: Schedule board shows the wrong station from which the train came - Fixed: On the Schedule Board, the Schedule Section of arrivals is always the first section in the train schedule - Fixed: The Schedule board sometimes shows the wrong train line - Fixed: The information about when a station tag was last edited, is incorrect - Fixed: The Train Text Components setting of the Advanced Displays is not copied - Minimum Create version is now 0.5.1.f ### Please note! ⚠️ Some Addons depending on CRN might break with this update. ⚠️ This update is available for versions 1.18 (Create 0.5.1.f+), 1.19 (Create 0.5.1.f+), 1.20 (Create 0.5.1f+, Create 6.0.4+) and 1.21 (Create 6.0.4+). Pay attention to the correct version for 1.20: The Create 6 compatible version includes `C6` in the version name! ⚠️ Version Support: [1.18, 1.19]: These versions are no longer supported after the first full release (v1.0) from CRN; [1.20]: Create versions before 6.0.0 are no longer supported in the future, only Create 6.0.4+ ⚠️ The Fabric versions for Create 6 in 1.20 and 1.21 will be available after the update of Create Fabric! ⚠️ Display Links will loose their Advanced Display Settings when upgrading to Create 6! ⚠️ Please backup your world before installing this update!

- Fixed: Crash when placing displays with the schematic cannon - Fixed: Crash when different displays connect and Embeddium is installed - Fixed: The platform is sometimes not visible on the departure board - Fixed: Not all train stats can be hidden - Fixed: With Dynamic Delay, no status is displayed on the Create display boards - Fixed: The stopovers do not use the entire display space - Fixed: Rare crash when train data cannot be accessed - Fixed: Total journey duration is not changed when travel times are reset - Fixed: Incorrect time predictions when Train Separation Condition is used - Fixed: The departure time on the departure board is black when the display is 4 blocks wide - Fixed: The times of the last departed trains (visible with goggles) are influenced by DragonLib's time settings - Fixed: Platform Focus Display does not update properly when no train is displayed - Fixed: Displays can show the entire schedule in rare cases - Fixed: The measured travel time between stations can never decrease - Fixed: Inconsistent total journey duration, as the values from Create are always used instead of the values from CRN - Fixed: The travel times of Create between two stations are not processed correctly by CRN - Fixed: The wrong train line may be displayed in the navigator when the same train is used multiple times - Fixed: Train name is not displayed in route details - Changed: Warning when Sodium is installed as it causes rendering issues - Updated DragonLib (now 2.2.24, included in the jar file, DO NOT DOWNLOAD MANUALLY) - Fixed: The config is corrected every time the game starts - New translations from Crowdin: Arabic, Turkish, Czech, Romanian

- Fixed: Crash when placing displays with the schematic cannon - Fixed: Crash when different displays connect and Embeddium is installed - Fixed: The platform is sometimes not visible on the departure board - Fixed: Not all train stats can be hidden - Fixed: With Dynamic Delay, no status is displayed on the Create display boards - Fixed: The stopovers do not use the entire display space - Fixed: Rare crash when train data cannot be accessed - Fixed: Total journey duration is not changed when travel times are reset - Fixed: Incorrect time predictions when Train Separation Condition is used - Fixed: The departure time on the departure board is black when the display is 4 blocks wide - Fixed: The times of the last departed trains (visible with goggles) are influenced by DragonLib's time settings - Fixed: Platform Focus Display does not update properly when no train is displayed - Fixed: Displays can show the entire schedule in rare cases - Fixed: The measured travel time between stations can never decrease - Fixed: Inconsistent total journey duration, as the values from Create are always used instead of the values from CRN - Fixed: The travel times of Create between two stations are not processed correctly by CRN - Fixed: The wrong train line may be displayed in the navigator when the same train is used multiple times - Fixed: Train name is not displayed in route details - Changed: Warning when Sodium is installed as it causes rendering issues - Updated DragonLib (now 2.2.24, included in the jar file, DO NOT DOWNLOAD MANUALLY) - Fixed: The config is corrected every time the game starts - New translations from Crowdin: Arabic, Turkish, Czech, Romanian

- Fixed: Crash when placing displays with the schematic cannon - Fixed: Crash when different displays connect and Embeddium is installed - Fixed: The platform is sometimes not visible on the departure board - Fixed: Not all train stats can be hidden - Fixed: With Dynamic Delay, no status is displayed on the Create display boards - Fixed: The stopovers do not use the entire display space - Fixed: Rare crash when train data cannot be accessed - Fixed: Total journey duration is not changed when travel times are reset - Fixed: Incorrect time predictions when Train Separation Condition is used - Fixed: The departure time on the departure board is black when the display is 4 blocks wide - Fixed: The times of the last departed trains (visible with goggles) are influenced by DragonLib's time settings - Fixed: Platform Focus Display does not update properly when no train is displayed - Fixed: Displays can show the entire schedule in rare cases - Fixed: The measured travel time between stations can never decrease - Fixed: Inconsistent total journey duration, as the values from Create are always used instead of the values from CRN - Fixed: The travel times of Create between two stations are not processed correctly by CRN - Fixed: The wrong train line may be displayed in the navigator when the same train is used multiple times - Fixed: Train name is not displayed in route details - Changed: Warning when Sodium is installed as it causes rendering issues - Updated DragonLib (now 2.2.24, included in the jar file, DO NOT DOWNLOAD MANUALLY) - Fixed: The config is corrected every time the game starts - New translations from Crowdin: Arabic, Turkish, Czech, Romanian

- Fixed: Crash when placing displays with the schematic cannon - Fixed: Crash when different displays connect and Embeddium is installed - Fixed: The platform is sometimes not visible on the departure board - Fixed: Not all train stats can be hidden - Fixed: With Dynamic Delay, no status is displayed on the Create display boards - Fixed: The stopovers do not use the entire display space - Fixed: Rare crash when train data cannot be accessed - Fixed: Total journey duration is not changed when travel times are reset - Fixed: Incorrect time predictions when Train Separation Condition is used - Fixed: The departure time on the departure board is black when the display is 4 blocks wide - Fixed: The times of the last departed trains (visible with goggles) are influenced by DragonLib's time settings - Fixed: Platform Focus Display does not update properly when no train is displayed - Fixed: Displays can show the entire schedule in rare cases - Fixed: The measured travel time between stations can never decrease - Fixed: Inconsistent total journey duration, as the values from Create are always used instead of the values from CRN - Fixed: The travel times of Create between two stations are not processed correctly by CRN - Fixed: The wrong train line may be displayed in the navigator when the same train is used multiple times - Fixed: Train name is not displayed in route details - Changed: Warning when Sodium is installed as it causes rendering issues - Updated DragonLib (now 2.2.24, included in the jar file, DO NOT DOWNLOAD MANUALLY) - Fixed: The config is corrected every time the game starts - New translations from Crowdin: Arabic, Turkish, Czech, Romanian

- Fixed: Crash when placing displays with the schematic cannon - Fixed: Crash when different displays connect and Embeddium is installed - Fixed: The platform is sometimes not visible on the departure board - Fixed: Not all train stats can be hidden - Fixed: With Dynamic Delay, no status is displayed on the Create display boards - Fixed: The stopovers do not use the entire display space - Fixed: Rare crash when train data cannot be accessed - Fixed: Total journey duration is not changed when travel times are reset - Fixed: Incorrect time predictions when Train Separation Condition is used - Fixed: The departure time on the departure board is black when the display is 4 blocks wide - Fixed: The times of the last departed trains (visible with goggles) are influenced by DragonLib's time settings - Fixed: Platform Focus Display does not update properly when no train is displayed - Fixed: Displays can show the entire schedule in rare cases - Fixed: The measured travel time between stations can never decrease - Fixed: Inconsistent total journey duration, as the values from Create are always used instead of the values from CRN - Fixed: The travel times of Create between two stations are not processed correctly by CRN - Fixed: The wrong train line may be displayed in the navigator when the same train is used multiple times - Fixed: Train name is not displayed in route details - Changed: Warning when Sodium is installed as it causes rendering issues - Updated DragonLib (now 2.2.24, included in the jar file, DO NOT DOWNLOAD MANUALLY) - Fixed: The config is corrected every time the game starts - New translations from Crowdin: Arabic, Turkish, Czech, Romanian

- Fixed: Crash when placing displays with the schematic cannon - Fixed: Crash when different displays connect and Embeddium is installed - Fixed: The platform is sometimes not visible on the departure board - Fixed: Not all train stats can be hidden - Fixed: With Dynamic Delay, no status is displayed on the Create display boards - Fixed: The stopovers do not use the entire display space - Fixed: Rare crash when train data cannot be accessed - Fixed: Total journey duration is not changed when travel times are reset - Fixed: Incorrect time predictions when Train Separation Condition is used - Fixed: The departure time on the departure board is black when the display is 4 blocks wide - Fixed: The times of the last departed trains (visible with goggles) are influenced by DragonLib's time settings - Fixed: Platform Focus Display does not update properly when no train is displayed - Fixed: Displays can show the entire schedule in rare cases - Fixed: The measured travel time between stations can never decrease - Fixed: Inconsistent total journey duration, as the values from Create are always used instead of the values from CRN - Fixed: The travel times of Create between two stations are not processed correctly by CRN - Fixed: The wrong train line may be displayed in the navigator when the same train is used multiple times - Fixed: Train name is not displayed in route details - Changed: Warning when Sodium is installed as it causes rendering issues - Updated DragonLib (now 2.2.24, included in the jar file, DO NOT DOWNLOAD MANUALLY) - Fixed: The config is corrected every time the game starts - New translations from Crowdin: Arabic, Turkish, Czech, Romanian

- Fixed: Client crash when the display type is changed in multiplayer by another Player - Fixed: Rare crash if the train schedule of a train is not yet available - Fixed: Error when updating the departure history - Fixed: The time unit on one display variant is inserted at the wrong location in the text - Updated Train Separation Condition Settings: Minutes, seconds and ticks can now be set independently with a maximum of around 900 minutes - More console output is now hidden and only visible by enabling the "Advanced Logging" option - Default config values ​​updated - Time for the announcement of arriving trains has been increased to 1200 ticks (1 minute) before arrival - Time for the announcement of the next stop has been increased to 600 ticks (30 seconds) before arrival - Compatibility with TrafficCraft 1.1.1+ - Updated DragonLib (now 2.2.22, included in the jar file, DO NOT DOWNLOAD MANUALLY) ⚠️ This version of Create Railways Navigator is not compatible with older versions of TrafficCraft before 1.1.1 due to some technical changes! If you are using TrafficCraft, please also update that mod!

- Fixed: Client crash when the display type is changed in multiplayer by another Player - Fixed: Rare crash if the train schedule of a train is not yet available - Fixed: Error when updating the departure history - Fixed: The time unit on one display variant is inserted at the wrong location in the text - Updated Train Separation Condition Settings: Minutes, seconds and ticks can now be set independently with a maximum of around 900 minutes - More console output is now hidden and only visible by enabling the "Advanced Logging" option - Default config values ​​updated - Time for the announcement of arriving trains has been increased to 1200 ticks (1 minute) before arrival - Time for the announcement of the next stop has been increased to 600 ticks (30 seconds) before arrival - Compatibility with TrafficCraft 1.1.1+ - Updated DragonLib (now 2.2.22, included in the jar file, DO NOT DOWNLOAD MANUALLY) ⚠️ This version of Create Railways Navigator is not compatible with older versions of TrafficCraft before 1.1.1 due to some technical changes! If you are using TrafficCraft, please also update that mod!

- Fixed: Client crash when the display type is changed in multiplayer by another Player - Fixed: Rare crash if the train schedule of a train is not yet available - Fixed: Error when updating the departure history - Fixed: The time unit on one display variant is inserted at the wrong location in the text - Updated Train Separation Condition Settings: Minutes, seconds and ticks can now be set independently with a maximum of around 900 minutes - More console output is now hidden and only visible by enabling the "Advanced Logging" option - Default config values ​​updated - Time for the announcement of arriving trains has been increased to 1200 ticks (1 minute) before arrival - Time for the announcement of the next stop has been increased to 600 ticks (30 seconds) before arrival - Compatibility with TrafficCraft 1.1.1+ - Updated DragonLib (now 2.2.22, included in the jar file, DO NOT DOWNLOAD MANUALLY) ⚠️ This version of Create Railways Navigator is not compatible with older versions of TrafficCraft before 1.1.1 due to some technical changes! If you are using TrafficCraft, please also update that mod!

- Fixed: Client crash when the display type is changed in multiplayer by another Player - Fixed: Rare crash if the train schedule of a train is not yet available - Fixed: Error when updating the departure history - Fixed: The time unit on one display variant is inserted at the wrong location in the text - Updated Train Separation Condition Settings: Minutes, seconds and ticks can now be set independently with a maximum of around 900 minutes - More console output is now hidden and only visible by enabling the "Advanced Logging" option - Default config values ​​updated - Time for the announcement of arriving trains has been increased to 1200 ticks (1 minute) before arrival - Time for the announcement of the next stop has been increased to 600 ticks (30 seconds) before arrival - Compatibility with TrafficCraft 1.1.1+ - Updated DragonLib (now 2.2.22, included in the jar file, DO NOT DOWNLOAD MANUALLY) ⚠️ This version of Create Railways Navigator is not compatible with older versions of TrafficCraft before 1.1.1 due to some technical changes! If you are using TrafficCraft, please also update that mod!

- Fixed: Client crash when the display type is changed in multiplayer by another Player - Fixed: Rare crash if the train schedule of a train is not yet available - Fixed: Error when updating the departure history - Fixed: The time unit on one display variant is inserted at the wrong location in the text - Updated Train Separation Condition Settings: Minutes, seconds and ticks can now be set independently with a maximum of around 900 minutes - More console output is now hidden and only visible by enabling the "Advanced Logging" option - Default config values ​​updated - Time for the announcement of arriving trains has been increased to 1200 ticks (1 minute) before arrival - Time for the announcement of the next stop has been increased to 600 ticks (30 seconds) before arrival - Compatibility with TrafficCraft 1.1.1+ - Updated DragonLib (now 2.2.22, included in the jar file, DO NOT DOWNLOAD MANUALLY) ⚠️ This version of Create Railways Navigator is not compatible with older versions of TrafficCraft before 1.1.1 due to some technical changes! If you are using TrafficCraft, please also update that mod!

- Fixed: Client crash when the display type is changed in multiplayer by another Player - Fixed: Rare crash if the train schedule of a train is not yet available - Fixed: Error when updating the departure history - Fixed: The time unit on one display variant is inserted at the wrong location in the text - Updated Train Separation Condition Settings: Minutes, seconds and ticks can now be set independently with a maximum of around 900 minutes - More console output is now hidden and only visible by enabling the "Advanced Logging" option - Default config values ​​updated - Time for the announcement of arriving trains has been increased to 1200 ticks (1 minute) before arrival - Time for the announcement of the next stop has been increased to 600 ticks (30 seconds) before arrival - Compatibility with TrafficCraft 1.1.1+ - Updated DragonLib (now 2.2.22, included in the jar file, DO NOT DOWNLOAD MANUALLY) ⚠️ This version of Create Railways Navigator is not compatible with older versions of TrafficCraft before 1.1.1 due to some technical changes! If you are using TrafficCraft, please also update that mod!

- General performance improvements, by reducing `stream()` calls and more aggressive caching of frequently used data. - Added: The old departure board display variant is back now! - Added: The Advanced Displays can be customized with numerous new settings - The background color of the Advanced Displays can be changed - Settings of the Advanced Displays can be copied - Some information and texts can be hidden (e.g. train name, statistics) - Arrivals of trains can now be turned off - Added: The background color of the displays can be changed with Shift + Click - Added: [Train Separation Condition](https://github.com/MisterJulsen/Create-Train-Navigator/wiki/Train-Separation) to allow trains to run at a certain frequency - Changed: The platform is now always visible on the Platform, Focus Displays when only one platform should be displayed. - Changed: The initialization of trains is now much faster and more reliable (except when you apply a new schedule due to limitations with Create itself) - Changed: CRN may now be compatible with some time mods. [experimental, untested] (You can change some time calculation parameters in the DragonLib common config) - Fixed: Global Settings are saved once per dimension - Fixed: Removed unused feature to prevent the game from crashing - Fixed: The console is spammed with lots of information (Can be turned on again with the "Advanced Logging" config option) - Fixed: CRN breaks recipes in Apotheosis - Fixed: The clock time on the advanced displays is also displayed as ETA - Fixed: Delays are not displayed as ETA - Fixed: Displays show the train name instead of the train line - Fixed: In the travel companion the wrong departure time is shown in the scrolling text - Fixed: The global settings are no longer sorted when updating a list - Fixed: Trains getting stuck in the "Preparing" phase - Fixed: The train status is not translated correctly or not translated at all (showing the translation key) - Fixed: [The text "Arrival in" in the route details screen of the navigator is not translated](https://youtube.com/shorts/vELtqMTUHX8?si=kv8Y_GIxFI2QETFB) - Fixed: Departing trains which then travel in a hidden section, are displayed with the destination "Out of service" - Fixed: The train delay information is sometimes not hidden - Fixed spelling in English and German translations - Removed unused textures - Added new translations from [Crowdin](https://crowdin.com/project/create-railways-navigator)

- General performance improvements, by reducing `stream()` calls and more aggressive caching of frequently used data. - Added: The old departure board display variant is back now! - Added: The Advanced Displays can be customized with numerous new settings - The background color of the Advanced Displays can be changed - Settings of the Advanced Displays can be copied - Some information and texts can be hidden (e.g. train name, statistics) - Arrivals of trains can now be turned off - Added: The background color of the displays can be changed with Shift + Click - Added: [Train Separation Condition](https://github.com/MisterJulsen/Create-Train-Navigator/wiki/Train-Separation) to allow trains to run at a certain frequency - Changed: The platform is now always visible on the Platform, Focus Displays when only one platform should be displayed. - Changed: The initialization of trains is now much faster and more reliable (except when you apply a new schedule due to limitations with Create itself) - Changed: CRN may now be compatible with some time mods. [experimental, untested] (You can change some time calculation parameters in the DragonLib common config) - Fixed: Global Settings are saved once per dimension - Fixed: Removed unused feature to prevent the game from crashing - Fixed: The console is spammed with lots of information (Can be turned on again with the "Advanced Logging" config option) - Fixed: CRN breaks recipes in Apotheosis - Fixed: The clock time on the advanced displays is also displayed as ETA - Fixed: Delays are not displayed as ETA - Fixed: Displays show the train name instead of the train line - Fixed: In the travel companion the wrong departure time is shown in the scrolling text - Fixed: The global settings are no longer sorted when updating a list - Fixed: Trains getting stuck in the "Preparing" phase - Fixed: The train status is not translated correctly or not translated at all (showing the translation key) - Fixed: [The text "Arrival in" in the route details screen of the navigator is not translated](https://youtube.com/shorts/vELtqMTUHX8?si=kv8Y_GIxFI2QETFB) - Fixed: Departing trains which then travel in a hidden section, are displayed with the destination "Out of service" - Fixed: The train delay information is sometimes not hidden - Fixed spelling in English and German translations - Removed unused textures - Added new translations from [Crowdin](https://crowdin.com/project/create-railways-navigator)

- General performance improvements, by reducing `stream()` calls and more aggressive caching of frequently used data. - Added: The old departure board display variant is back now! - Added: The Advanced Displays can be customized with numerous new settings - The background color of the Advanced Displays can be changed - Settings of the Advanced Displays can be copied - Some information and texts can be hidden (e.g. train name, statistics) - Arrivals of trains can now be turned off - Added: The background color of the displays can be changed with Shift + Click - Added: [Train Separation Condition](https://github.com/MisterJulsen/Create-Train-Navigator/wiki/Train-Separation) to allow trains to run at a certain frequency - Changed: The platform is now always visible on the Platform, Focus Displays when only one platform should be displayed. - Changed: The initialization of trains is now much faster and more reliable (except when you apply a new schedule due to limitations with Create itself) - Changed: CRN may now be compatible with some time mods. [experimental, untested] (You can change some time calculation parameters in the DragonLib common config) - Fixed: Global Settings are saved once per dimension - Fixed: Removed unused feature to prevent the game from crashing - Fixed: The console is spammed with lots of information (Can be turned on again with the "Advanced Logging" config option) - Fixed: CRN breaks recipes in Apotheosis - Fixed: The clock time on the advanced displays is also displayed as ETA - Fixed: Delays are not displayed as ETA - Fixed: Displays show the train name instead of the train line - Fixed: In the travel companion the wrong departure time is shown in the scrolling text - Fixed: The global settings are no longer sorted when updating a list - Fixed: Trains getting stuck in the "Preparing" phase - Fixed: The train status is not translated correctly or not translated at all (showing the translation key) - Fixed: [The text "Arrival in" in the route details screen of the navigator is not translated](https://youtube.com/shorts/vELtqMTUHX8?si=kv8Y_GIxFI2QETFB) - Fixed: Departing trains which then travel in a hidden section, are displayed with the destination "Out of service" - Fixed: The train delay information is sometimes not hidden - Fixed spelling in English and German translations - Removed unused textures - Added new translations from [Crowdin](https://crowdin.com/project/create-railways-navigator)

- General performance improvements, by reducing `stream()` calls and more aggressive caching of frequently used data. - Added: The old departure board display variant is back now! - Added: The Advanced Displays can be customized with numerous new settings - The background color of the Advanced Displays can be changed - Settings of the Advanced Displays can be copied - Some information and texts can be hidden (e.g. train name, statistics) - Arrivals of trains can now be turned off - Added: The background color of the displays can be changed with Shift + Click - Added: [Train Separation Condition](https://github.com/MisterJulsen/Create-Train-Navigator/wiki/Train-Separation) to allow trains to run at a certain frequency - Changed: The platform is now always visible on the Platform, Focus Displays when only one platform should be displayed. - Changed: The initialization of trains is now much faster and more reliable (except when you apply a new schedule due to limitations with Create itself) - Changed: CRN may now be compatible with some time mods. [experimental, untested] (You can change some time calculation parameters in the DragonLib common config) - Fixed: Global Settings are saved once per dimension - Fixed: Removed unused feature to prevent the game from crashing - Fixed: The console is spammed with lots of information (Can be turned on again with the "Advanced Logging" config option) - Fixed: CRN breaks recipes in Apotheosis - Fixed: The clock time on the advanced displays is also displayed as ETA - Fixed: Delays are not displayed as ETA - Fixed: Displays show the train name instead of the train line - Fixed: In the travel companion the wrong departure time is shown in the scrolling text - Fixed: The global settings are no longer sorted when updating a list - Fixed: Trains getting stuck in the "Preparing" phase - Fixed: The train status is not translated correctly or not translated at all (showing the translation key) - Fixed: [The text "Arrival in" in the route details screen of the navigator is not translated](https://youtube.com/shorts/vELtqMTUHX8?si=kv8Y_GIxFI2QETFB) - Fixed: Departing trains which then travel in a hidden section, are displayed with the destination "Out of service" - Fixed: The train delay information is sometimes not hidden - Fixed spelling in English and German translations - Removed unused textures - Added new translations from [Crowdin](https://crowdin.com/project/create-railways-navigator)

- General performance improvements, by reducing `stream()` calls and more aggressive caching of frequently used data. - Added: The old departure board display variant is back now! - Added: The Advanced Displays can be customized with numerous new settings - The background color of the Advanced Displays can be changed - Settings of the Advanced Displays can be copied - Some information and texts can be hidden (e.g. train name, statistics) - Arrivals of trains can now be turned off - Added: The background color of the displays can be changed with Shift + Click - Added: [Train Separation Condition](https://github.com/MisterJulsen/Create-Train-Navigator/wiki/Train-Separation) to allow trains to run at a certain frequency - Changed: The platform is now always visible on the Platform, Focus Displays when only one platform should be displayed. - Changed: The initialization of trains is now much faster and more reliable (except when you apply a new schedule due to limitations with Create itself) - Changed: CRN may now be compatible with some time mods. [experimental, untested] (You can change some time calculation parameters in the DragonLib common config) - Fixed: Global Settings are saved once per dimension - Fixed: Removed unused feature to prevent the game from crashing - Fixed: The console is spammed with lots of information (Can be turned on again with the "Advanced Logging" config option) - Fixed: CRN breaks recipes in Apotheosis - Fixed: The clock time on the advanced displays is also displayed as ETA - Fixed: Delays are not displayed as ETA - Fixed: Displays show the train name instead of the train line - Fixed: In the travel companion the wrong departure time is shown in the scrolling text - Fixed: The global settings are no longer sorted when updating a list - Fixed: Trains getting stuck in the "Preparing" phase - Fixed: The train status is not translated correctly or not translated at all (showing the translation key) - Fixed: [The text "Arrival in" in the route details screen of the navigator is not translated](https://youtube.com/shorts/vELtqMTUHX8?si=kv8Y_GIxFI2QETFB) - Fixed: Departing trains which then travel in a hidden section, are displayed with the destination "Out of service" - Fixed: The train delay information is sometimes not hidden - Fixed spelling in English and German translations - Removed unused textures - Added new translations from [Crowdin](https://crowdin.com/project/create-railways-navigator)

- General performance improvements, by reducing `stream()` calls and more aggressive caching of frequently used data. - Added: The old departure board display variant is back now! - Added: The Advanced Displays can be customized with numerous new settings - The background color of the Advanced Displays can be changed - Settings of the Advanced Displays can be copied - Some information and texts can be hidden (e.g. train name, statistics) - Arrivals of trains can now be turned off - Added: The background color of the displays can be changed with Shift + Click - Added: [Train Separation Condition](https://github.com/MisterJulsen/Create-Train-Navigator/wiki/Train-Separation) to allow trains to run at a certain frequency - Changed: The platform is now always visible on the Platform, Focus Displays when only one platform should be displayed. - Changed: The initialization of trains is now much faster and more reliable (except when you apply a new schedule due to limitations with Create itself) - Changed: CRN may now be compatible with some time mods. [experimental, untested] (You can change some time calculation parameters in the DragonLib common config) - Fixed: Global Settings are saved once per dimension - Fixed: Removed unused feature to prevent the game from crashing - Fixed: The console is spammed with lots of information (Can be turned on again with the "Advanced Logging" config option) - Fixed: CRN breaks recipes in Apotheosis - Fixed: The clock time on the advanced displays is also displayed as ETA - Fixed: Delays are not displayed as ETA - Fixed: Displays show the train name instead of the train line - Fixed: In the travel companion the wrong departure time is shown in the scrolling text - Fixed: The global settings are no longer sorted when updating a list - Fixed: Trains getting stuck in the "Preparing" phase - Fixed: The train status is not translated correctly or not translated at all (showing the translation key) - Fixed: [The text "Arrival in" in the route details screen of the navigator is not translated](https://youtube.com/shorts/vELtqMTUHX8?si=kv8Y_GIxFI2QETFB) - Fixed: Departing trains which then travel in a hidden section, are displayed with the destination "Out of service" - Fixed: The train delay information is sometimes not hidden - Fixed spelling in English and German translations - Removed unused textures - Added new translations from [Crowdin](https://crowdin.com/project/create-railways-navigator)

- The entire codebase has been updated and changed: All calculations are now server based to synchronize it to all players - Performance improvements with multi-threading when using displays and other features - Added: Trains can now have real delays - Added: Reasons for a train delay on displays and in the navigator - Added: Departure time can be changed when searching routes - Added: Advanced Display Slab - Added: New Schedule Instructions - [Dynamic Delays](https://github.com/MisterJulsen/Create-Train-Navigator/wiki/Dynamic-Delays): Trains depart faster if they are delayed or wait longer if they are early - [Train Schedule Sections](https://github.com/MisterJulsen/Create-Train-Navigator/wiki/Train-Schedule-Sections): Divide your train schedule into sections to influence navigation (e.g. blacklist sections) or to set the terminus yourself - [Reset Timings](https://github.com/MisterJulsen/Create-Train-Navigator/wiki/Scheduled-Time-and-Real-Time) - Added: Schedule Board menu in the navigator: A list of all arriving and departing trains at a station - Added: Train Journey viewer: See the entire journey for each train and not just your route - Added: Routes can now be saved - Added: [Train Lines](https://github.com/MisterJulsen/Create-Train-Navigator/wiki/Train-Lines): Trains can now be assigned to a train line and no longer need to have the same name - Added: Trains can now have different colors in the Navigator with Train Groups and Train Lines - Added: The informative display variant of the Passenger Information Displays now shows real-time data as well as details about the train journey (e.g. speed) - Added: Help buttons in all menus - Changed: The departure and arrival times of a train are now displayed separately - Changed: New and improved UI in the navigator and all menus - Changed: Displays at a train terminus now show that this train ends here - Changed: The search settings can now be changed directly in the main screen of the navigator - Changed: The layout of the "Platform Displays", "Informative" is now mirrored on the back so that the platform text is on the same side of the block - Changed: [Train Groups](https://github.com/MisterJulsen/Create-Train-Navigator/wiki/Train-Groups) can now have colors and must be assigned via the train schedule - Changed: Displays are no longer divided into "Simple", "Detailed" and "Informative", but by category (Train/Platform) and then all the different display variants. - Changed: The entire config has been changed and some new options have been added - Changed: The individual entries in the station tags can now be searched - Changed: All lists in the menus are now sorted alphabetically - Changed: Remaining time is no longer displayed in the format XX:XX - Fixed: The navigator cannot find some connections - Fixed: A few spelling mistakes - Fixed: Scrollbars can now be dragged - Fixed: The GUI scale of the overlay cannot be changed - Fixed: The exit direction on the back of a display is displayed incorrectly - Removed: Table Display layout of "Platform Display" and "Informative" when using wildcards (will be added in the future again) - Removed: Narrator announcements - Now using DragonLib 2.2.16 (included in the jar file!) - Addons can now more easily add custom features to CRN (e.g. new display variants, buttons in the route details, etc.) (documentation coming in the future) - Added French (by GeoffreyGx) - Added Portuguese (by AlfredoProgramer) - Added Korean (by queso-gato1355) - Added Swedish (by Geoffrey) _... and a few other small improvements_ ## Breaking changes - Trains will no longer be assigned to Train Groups, as this can now be achieved in the train schedule with [Schedule Sections](https://github.com/MisterJulsen/Create-Train-Navigator/wiki/Train-Schedule-Sections). - All config settings will be reset, as the entire config has been changed ## PLEASE NOTE! ⚠️ **PLEASE BACKUP YOUR WORLD BEFORE INSTALLING THE UPDATE!** Since the entire code of CRN has been changed, some known bugs may have been fixed, but many new ones may have been added! ⚠️ After the update has been installed, each train must run at least one cycle before it can be used with CRN. [CRN must initialize the trains first](https://github.com/MisterJulsen/Create-Train-Navigator/wiki/Train-Initialization). ⚠️ On busy routes, trains may get permanent delays. It is recommended to use dynamic delays so that trains can compensate delays. ⚠️ By default, all trains will start and end at the first stop of their schedule. This can be changed with train schedule sections. ⚠️ All addons that rely on CRN will probably no longer work correctly.

- The entire codebase has been updated and changed: All calculations are now server based to synchronize it to all players - Performance improvements with multi-threading when using displays and other features - Added: Trains can now have real delays - Added: Reasons for a train delay on displays and in the navigator - Added: Departure time can be changed when searching routes - Added: Advanced Display Slab - Added: New Schedule Instructions - [Dynamic Delays](https://github.com/MisterJulsen/Create-Train-Navigator/wiki/Dynamic-Delays): Trains depart faster if they are delayed or wait longer if they are early - [Train Schedule Sections](https://github.com/MisterJulsen/Create-Train-Navigator/wiki/Train-Schedule-Sections): Divide your train schedule into sections to influence navigation (e.g. blacklist sections) or to set the terminus yourself - [Reset Timings](https://github.com/MisterJulsen/Create-Train-Navigator/wiki/Scheduled-Time-and-Real-Time) - Added: Schedule Board menu in the navigator: A list of all arriving and departing trains at a station - Added: Train Journey viewer: See the entire journey for each train and not just your route - Added: Routes can now be saved - Added: [Train Lines](https://github.com/MisterJulsen/Create-Train-Navigator/wiki/Train-Lines): Trains can now be assigned to a train line and no longer need to have the same name - Added: Trains can now have different colors in the Navigator with Train Groups and Train Lines - Added: The informative display variant of the Passenger Information Displays now shows real-time data as well as details about the train journey (e.g. speed) - Added: Help buttons in all menus - Changed: The departure and arrival times of a train are now displayed separately - Changed: New and improved UI in the navigator and all menus - Changed: Displays at a train terminus now show that this train ends here - Changed: The search settings can now be changed directly in the main screen of the navigator - Changed: The layout of the "Platform Displays", "Informative" is now mirrored on the back so that the platform text is on the same side of the block - Changed: [Train Groups](https://github.com/MisterJulsen/Create-Train-Navigator/wiki/Train-Groups) can now have colors and must be assigned via the train schedule - Changed: Displays are no longer divided into "Simple", "Detailed" and "Informative", but by category (Train/Platform) and then all the different display variants. - Changed: The entire config has been changed and some new options have been added - Changed: The individual entries in the station tags can now be searched - Changed: All lists in the menus are now sorted alphabetically - Changed: Remaining time is no longer displayed in the format XX:XX - Fixed: The navigator cannot find some connections - Fixed: A few spelling mistakes - Fixed: Scrollbars can now be dragged - Fixed: The GUI scale of the overlay cannot be changed - Fixed: The exit direction on the back of a display is displayed incorrectly - Removed: Table Display layout of "Platform Display" and "Informative" when using wildcards (will be added in the future again) - Removed: Narrator announcements - Now using DragonLib 2.2.16 (included in the jar file!) - Addons can now more easily add custom features to CRN (e.g. new display variants, buttons in the route details, etc.) (documentation coming in the future) - Added French (by GeoffreyGx) - Added Portuguese (by AlfredoProgramer) - Added Korean (by queso-gato1355) - Added Swedish (by Geoffrey) _... and a few other small improvements_ ## Breaking changes - Trains will no longer be assigned to Train Groups, as this can now be achieved in the train schedule with [Schedule Sections](https://github.com/MisterJulsen/Create-Train-Navigator/wiki/Train-Schedule-Sections). - All config settings will be reset, as the entire config has been changed ## PLEASE NOTE! ⚠️ **PLEASE BACKUP YOUR WORLD BEFORE INSTALLING THE UPDATE!** Since the entire code of CRN has been changed, some known bugs may have been fixed, but many new ones may have been added! ⚠️ After the update has been installed, each train must run at least one cycle before it can be used with CRN. [CRN must initialize the trains first](https://github.com/MisterJulsen/Create-Train-Navigator/wiki/Train-Initialization). ⚠️ On busy routes, trains may get permanent delays. It is recommended to use dynamic delays so that trains can compensate delays. ⚠️ By default, all trains will start and end at the first stop of their schedule. This can be changed with train schedule sections. ⚠️ All addons that rely on CRN will probably no longer work correctly.

- The entire codebase has been updated and changed: All calculations are now server based to synchronize it to all players - Performance improvements with multi-threading when using displays and other features - Added: Trains can now have real delays - Added: Reasons for a train delay on displays and in the navigator - Added: Departure time can be changed when searching routes - Added: Advanced Display Slab - Added: New Schedule Instructions - [Dynamic Delays](https://github.com/MisterJulsen/Create-Train-Navigator/wiki/Dynamic-Delays): Trains depart faster if they are delayed or wait longer if they are early - [Train Schedule Sections](https://github.com/MisterJulsen/Create-Train-Navigator/wiki/Train-Schedule-Sections): Divide your train schedule into sections to influence navigation (e.g. blacklist sections) or to set the terminus yourself - [Reset Timings](https://github.com/MisterJulsen/Create-Train-Navigator/wiki/Scheduled-Time-and-Real-Time) - Added: Schedule Board menu in the navigator: A list of all arriving and departing trains at a station - Added: Train Journey viewer: See the entire journey for each train and not just your route - Added: Routes can now be saved - Added: [Train Lines](https://github.com/MisterJulsen/Create-Train-Navigator/wiki/Train-Lines): Trains can now be assigned to a train line and no longer need to have the same name - Added: Trains can now have different colors in the Navigator with Train Groups and Train Lines - Added: The informative display variant of the Passenger Information Displays now shows real-time data as well as details about the train journey (e.g. speed) - Added: Help buttons in all menus - Changed: The departure and arrival times of a train are now displayed separately - Changed: New and improved UI in the navigator and all menus - Changed: Displays at a train terminus now show that this train ends here - Changed: The search settings can now be changed directly in the main screen of the navigator - Changed: The layout of the "Platform Displays", "Informative" is now mirrored on the back so that the platform text is on the same side of the block - Changed: [Train Groups](https://github.com/MisterJulsen/Create-Train-Navigator/wiki/Train-Groups) can now have colors and must be assigned via the train schedule - Changed: Displays are no longer divided into "Simple", "Detailed" and "Informative", but by category (Train/Platform) and then all the different display variants. - Changed: The entire config has been changed and some new options have been added - Changed: The individual entries in the station tags can now be searched - Changed: All lists in the menus are now sorted alphabetically - Changed: Remaining time is no longer displayed in the format XX:XX - Fixed: The navigator cannot find some connections - Fixed: A few spelling mistakes - Fixed: Scrollbars can now be dragged - Fixed: The GUI scale of the overlay cannot be changed - Fixed: The exit direction on the back of a display is displayed incorrectly - Removed: Table Display layout of "Platform Display" and "Informative" when using wildcards (will be added in the future again) - Removed: Narrator announcements - Now using DragonLib 2.2.16 (included in the jar file!) - Addons can now more easily add custom features to CRN (e.g. new display variants, buttons in the route details, etc.) (documentation coming in the future) - Added French (by GeoffreyGx) - Added Portuguese (by AlfredoProgramer) - Added Korean (by queso-gato1355) - Added Swedish (by Geoffrey) _... and a few other small improvements_ ## Breaking changes - Trains will no longer be assigned to Train Groups, as this can now be achieved in the train schedule with [Schedule Sections](https://github.com/MisterJulsen/Create-Train-Navigator/wiki/Train-Schedule-Sections). - All config settings will be reset, as the entire config has been changed ## PLEASE NOTE! ⚠️ **PLEASE BACKUP YOUR WORLD BEFORE INSTALLING THE UPDATE!** Since the entire code of CRN has been changed, some known bugs may have been fixed, but many new ones may have been added! ⚠️ After the update has been installed, each train must run at least one cycle before it can be used with CRN. [CRN must initialize the trains first](https://github.com/MisterJulsen/Create-Train-Navigator/wiki/Train-Initialization). ⚠️ On busy routes, trains may get permanent delays. It is recommended to use dynamic delays so that trains can compensate delays. ⚠️ By default, all trains will start and end at the first stop of their schedule. This can be changed with train schedule sections. ⚠️ All addons that rely on CRN will probably no longer work correctly.

- The entire codebase has been updated and changed: All calculations are now server based to synchronize it to all players - Performance improvements with multi-threading when using displays and other features - Added: Trains can now have real delays - Added: Reasons for a train delay on displays and in the navigator - Added: Departure time can be changed when searching routes - Added: Advanced Display Slab - Added: New Schedule Instructions - [Dynamic Delays](https://github.com/MisterJulsen/Create-Train-Navigator/wiki/Dynamic-Delays): Trains depart faster if they are delayed or wait longer if they are early - [Train Schedule Sections](https://github.com/MisterJulsen/Create-Train-Navigator/wiki/Train-Schedule-Sections): Divide your train schedule into sections to influence navigation (e.g. blacklist sections) or to set the terminus yourself - [Reset Timings](https://github.com/MisterJulsen/Create-Train-Navigator/wiki/Scheduled-Time-and-Real-Time) - Added: Schedule Board menu in the navigator: A list of all arriving and departing trains at a station - Added: Train Journey viewer: See the entire journey for each train and not just your route - Added: Routes can now be saved - Added: [Train Lines](https://github.com/MisterJulsen/Create-Train-Navigator/wiki/Train-Lines): Trains can now be assigned to a train line and no longer need to have the same name - Added: Trains can now have different colors in the Navigator with Train Groups and Train Lines - Added: The informative display variant of the Passenger Information Displays now shows real-time data as well as details about the train journey (e.g. speed) - Added: Help buttons in all menus - Changed: The departure and arrival times of a train are now displayed separately - Changed: New and improved UI in the navigator and all menus - Changed: Displays at a train terminus now show that this train ends here - Changed: The search settings can now be changed directly in the main screen of the navigator - Changed: The layout of the "Platform Displays", "Informative" is now mirrored on the back so that the platform text is on the same side of the block - Changed: [Train Groups](https://github.com/MisterJulsen/Create-Train-Navigator/wiki/Train-Groups) can now have colors and must be assigned via the train schedule - Changed: Displays are no longer divided into "Simple", "Detailed" and "Informative", but by category (Train/Platform) and then all the different display variants. - Changed: The entire config has been changed and some new options have been added - Changed: The individual entries in the station tags can now be searched - Changed: All lists in the menus are now sorted alphabetically - Changed: Remaining time is no longer displayed in the format XX:XX - Fixed: The navigator cannot find some connections - Fixed: A few spelling mistakes - Fixed: Scrollbars can now be dragged - Fixed: The GUI scale of the overlay cannot be changed - Fixed: The exit direction on the back of a display is displayed incorrectly - Removed: Table Display layout of "Platform Display" and "Informative" when using wildcards (will be added in the future again) - Removed: Narrator announcements - Now using DragonLib 2.2.16 (included in the jar file!) - Addons can now more easily add custom features to CRN (e.g. new display variants, buttons in the route details, etc.) (documentation coming in the future) - Added French (by GeoffreyGx) - Added Portuguese (by AlfredoProgramer) - Added Korean (by queso-gato1355) - Added Swedish (by Geoffrey) _... and a few other small improvements_ ## Breaking changes - Trains will no longer be assigned to Train Groups, as this can now be achieved in the train schedule with [Schedule Sections](https://github.com/MisterJulsen/Create-Train-Navigator/wiki/Train-Schedule-Sections). - All config settings will be reset, as the entire config has been changed ## PLEASE NOTE! ⚠️ **PLEASE BACKUP YOUR WORLD BEFORE INSTALLING THE UPDATE!** Since the entire code of CRN has been changed, some known bugs may have been fixed, but many new ones may have been added! ⚠️ After the update has been installed, each train must run at least one cycle before it can be used with CRN. [CRN must initialize the trains first](https://github.com/MisterJulsen/Create-Train-Navigator/wiki/Train-Initialization). ⚠️ On busy routes, trains may get permanent delays. It is recommended to use dynamic delays so that trains can compensate delays. ⚠️ By default, all trains will start and end at the first stop of their schedule. This can be changed with train schedule sections. ⚠️ All addons that rely on CRN will probably no longer work correctly.

- The entire codebase has been updated and changed: All calculations are now server based to synchronize it to all players - Performance improvements with multi-threading when using displays and other features - Added: Trains can now have real delays - Added: Reasons for a train delay on displays and in the navigator - Added: Departure time can be changed when searching routes - Added: Advanced Display Slab - Added: New Schedule Instructions - [Dynamic Delays](https://github.com/MisterJulsen/Create-Train-Navigator/wiki/Dynamic-Delays): Trains depart faster if they are delayed or wait longer if they are early - [Train Schedule Sections](https://github.com/MisterJulsen/Create-Train-Navigator/wiki/Train-Schedule-Sections): Divide your train schedule into sections to influence navigation (e.g. blacklist sections) or to set the terminus yourself - [Reset Timings](https://github.com/MisterJulsen/Create-Train-Navigator/wiki/Scheduled-Time-and-Real-Time) - Added: Schedule Board menu in the navigator: A list of all arriving and departing trains at a station - Added: Train Journey viewer: See the entire journey for each train and not just your route - Added: Routes can now be saved - Added: [Train Lines](https://github.com/MisterJulsen/Create-Train-Navigator/wiki/Train-Lines): Trains can now be assigned to a train line and no longer need to have the same name - Added: Trains can now have different colors in the Navigator with Train Groups and Train Lines - Added: The informative display variant of the Passenger Information Displays now shows real-time data as well as details about the train journey (e.g. speed) - Added: Help buttons in all menus - Changed: The departure and arrival times of a train are now displayed separately - Changed: New and improved UI in the navigator and all menus - Changed: Displays at a train terminus now show that this train ends here - Changed: The search settings can now be changed directly in the main screen of the navigator - Changed: The layout of the "Platform Displays", "Informative" is now mirrored on the back so that the platform text is on the same side of the block - Changed: [Train Groups](https://github.com/MisterJulsen/Create-Train-Navigator/wiki/Train-Groups) can now have colors and must be assigned via the train schedule - Changed: Displays are no longer divided into "Simple", "Detailed" and "Informative", but by category (Train/Platform) and then all the different display variants. - Changed: The entire config has been changed and some new options have been added - Changed: The individual entries in the station tags can now be searched - Changed: All lists in the menus are now sorted alphabetically - Changed: Remaining time is no longer displayed in the format XX:XX - Fixed: The navigator cannot find some connections - Fixed: A few spelling mistakes - Fixed: Scrollbars can now be dragged - Fixed: The GUI scale of the overlay cannot be changed - Fixed: The exit direction on the back of a display is displayed incorrectly - Removed: Table Display layout of "Platform Display" and "Informative" when using wildcards (will be added in the future again) - Removed: Narrator announcements - Now using DragonLib 2.2.16 (included in the jar file!) - Addons can now more easily add custom features to CRN (e.g. new display variants, buttons in the route details, etc.) (documentation coming in the future) - Added French (by GeoffreyGx) - Added Portuguese (by AlfredoProgramer) - Added Korean (by queso-gato1355) - Added Swedish (by Geoffrey) _... and a few other small improvements_ ## Breaking changes - Trains will no longer be assigned to Train Groups, as this can now be achieved in the train schedule with [Schedule Sections](https://github.com/MisterJulsen/Create-Train-Navigator/wiki/Train-Schedule-Sections). - All config settings will be reset, as the entire config has been changed ## PLEASE NOTE! ⚠️ **PLEASE BACKUP YOUR WORLD BEFORE INSTALLING THE UPDATE!** Since the entire code of CRN has been changed, some known bugs may have been fixed, but many new ones may have been added! ⚠️ After the update has been installed, each train must run at least one cycle before it can be used with CRN. [CRN must initialize the trains first](https://github.com/MisterJulsen/Create-Train-Navigator/wiki/Train-Initialization). ⚠️ On busy routes, trains may get permanent delays. It is recommended to use dynamic delays so that trains can compensate delays. ⚠️ By default, all trains will start and end at the first stop of their schedule. This can be changed with train schedule sections. ⚠️ All addons that rely on CRN will probably no longer work correctly.

- The entire codebase has been updated and changed: All calculations are now server based to synchronize it to all players - Performance improvements with multi-threading when using displays and other features - Added: Trains can now have real delays - Added: Reasons for a train delay on displays and in the navigator - Added: Departure time can be changed when searching routes - Added: Advanced Display Slab - Added: New Schedule Instructions - [Dynamic Delays](https://github.com/MisterJulsen/Create-Train-Navigator/wiki/Dynamic-Delays): Trains depart faster if they are delayed or wait longer if they are early - [Train Schedule Sections](https://github.com/MisterJulsen/Create-Train-Navigator/wiki/Train-Schedule-Sections): Divide your train schedule into sections to influence navigation (e.g. blacklist sections) or to set the terminus yourself - [Reset Timings](https://github.com/MisterJulsen/Create-Train-Navigator/wiki/Scheduled-Time-and-Real-Time) - Added: Schedule Board menu in the navigator: A list of all arriving and departing trains at a station - Added: Train Journey viewer: See the entire journey for each train and not just your route - Added: Routes can now be saved - Added: [Train Lines](https://github.com/MisterJulsen/Create-Train-Navigator/wiki/Train-Lines): Trains can now be assigned to a train line and no longer need to have the same name - Added: Trains can now have different colors in the Navigator with Train Groups and Train Lines - Added: The informative display variant of the Passenger Information Displays now shows real-time data as well as details about the train journey (e.g. speed) - Added: Help buttons in all menus - Changed: The departure and arrival times of a train are now displayed separately - Changed: New and improved UI in the navigator and all menus - Changed: Displays at a train terminus now show that this train ends here - Changed: The search settings can now be changed directly in the main screen of the navigator - Changed: The layout of the "Platform Displays", "Informative" is now mirrored on the back so that the platform text is on the same side of the block - Changed: [Train Groups](https://github.com/MisterJulsen/Create-Train-Navigator/wiki/Train-Groups) can now have colors and must be assigned via the train schedule - Changed: Displays are no longer divided into "Simple", "Detailed" and "Informative", but by category (Train/Platform) and then all the different display variants. - Changed: The entire config has been changed and some new options have been added - Changed: The individual entries in the station tags can now be searched - Changed: All lists in the menus are now sorted alphabetically - Changed: Remaining time is no longer displayed in the format XX:XX - Fixed: The navigator cannot find some connections - Fixed: A few spelling mistakes - Fixed: Scrollbars can now be dragged - Fixed: The GUI scale of the overlay cannot be changed - Fixed: The exit direction on the back of a display is displayed incorrectly - Removed: Table Display layout of "Platform Display" and "Informative" when using wildcards (will be added in the future again) - Removed: Narrator announcements - Now using DragonLib 2.2.16 (included in the jar file!) - Addons can now more easily add custom features to CRN (e.g. new display variants, buttons in the route details, etc.) (documentation coming in the future) - Added French (by GeoffreyGx) - Added Portuguese (by AlfredoProgramer) - Added Korean (by queso-gato1355) - Added Swedish (by Geoffrey) _... and a few other small improvements_ ## Breaking changes - Trains will no longer be assigned to Train Groups, as this can now be achieved in the train schedule with [Schedule Sections](https://github.com/MisterJulsen/Create-Train-Navigator/wiki/Train-Schedule-Sections). - All config settings will be reset, as the entire config has been changed ## PLEASE NOTE! ⚠️ **PLEASE BACKUP YOUR WORLD BEFORE INSTALLING THE UPDATE!** Since the entire code of CRN has been changed, some known bugs may have been fixed, but many new ones may have been added! ⚠️ After the update has been installed, each train must run at least one cycle before it can be used with CRN. [CRN must initialize the trains first](https://github.com/MisterJulsen/Create-Train-Navigator/wiki/Train-Initialization). ⚠️ On busy routes, trains may get permanent delays. It is recommended to use dynamic delays so that trains can compensate delays. ⚠️ By default, all trains will start and end at the first stop of their schedule. This can be changed with train schedule sections. ⚠️ All addons that rely on CRN will probably no longer work correctly.

- Fixed: Crash when Yet Another Config Lib is installed. - Updated DragonLib to fix that crash (now 2.1.14). Please note: DragonLib is included in the jar file! You don't have to download it manually!

- Fixed: Crash when Yet Another Config Lib is installed. - Updated DragonLib to fix that crash (now 2.1.14). Please note: DragonLib is included in the jar file! You don't have to download it manually!

- Updated DragonLib (now 2.1.13) - Fixed: Crash when using Advanced Displays on other contraptions - Fixed: Incorrect position of the text on the back of Advanced Displays with the exit direction - Fixed: Translation fallback does not replace placeholders, leading to incomplete texts - Fixed: Advanced displays placed with a schematic show black text - Changed: Language Loading System - Added: Spanish translation (by albertosaurio65) - Added: Russian translation (by VGamerGroup) - Changed: Chinese translation (by iaddda)

- Updated DragonLib (now 2.1.13) - Fixed: Crash when using Advanced Displays on other contraptions - Fixed: Incorrect position of the text on the back of Advanced Displays with the exit direction - Fixed: Translation fallback does not replace placeholders, leading to incomplete texts - Fixed: Advanced displays placed with a schematic show black text - Changed: Language Loading System - Added: Spanish translation (by albertosaurio65) - Added: Russian translation (by VGamerGroup) - Changed: Chinese translation (by iaddda)

- Updated DragonLib (now 2.1.13) - Fixed: Crash when using Advanced Displays on other contraptions - Fixed: Incorrect position of the text on the back of Advanced Displays with the exit direction - Fixed: Translation fallback does not replace placeholders, leading to incomplete texts - Fixed: Advanced displays placed with a schematic show black text - Changed: Language Loading System - Added: Spanish translation (by albertosaurio65) - Added: Russian translation (by VGamerGroup) - Changed: Chinese translation (by iaddda)

- Updated DragonLib (now 2.1.13) - Fixed: Crash when using Advanced Displays on other contraptions - Fixed: Incorrect position of the text on the back of Advanced Displays with the exit direction - Fixed: Translation fallback does not replace placeholders, leading to incomplete texts - Fixed: Advanced displays placed with a schematic show black text - Changed: Language Loading System - Added: Spanish translation (by albertosaurio65) - Added: Russian translation (by VGamerGroup) - Changed: Chinese translation (by iaddda)

- Updated DragonLib (now 2.1.13) - Fixed: Crash when using Advanced Displays on other contraptions - Fixed: Incorrect position of the text on the back of Advanced Displays with the exit direction - Fixed: Translation fallback does not replace placeholders, leading to incomplete texts - Fixed: Advanced displays placed with a schematic show black text - Changed: Language Loading System - Added: Spanish translation (by albertosaurio65) - Added: Russian translation (by VGamerGroup) - Changed: Chinese translation (by iaddda)

- Updated DragonLib (now 2.1.13) - Fixed: Crash when using Advanced Displays on other contraptions - Fixed: Incorrect position of the text on the back of Advanced Displays with the exit direction - Fixed: Translation fallback does not replace placeholders, leading to incomplete texts - Fixed: Advanced displays placed with a schematic show black text - Changed: Language Loading System - Added: Spanish translation (by albertosaurio65) - Added: Russian translation (by VGamerGroup) - Changed: Chinese translation (by iaddda)

- Added: New Half Advanced Display Panel (a thin variant of the small displays) (by slmnio) - Added: New text for displays that are placed on trains and out of service - Added: New languages - Chinese (simplified) (by Mingshuai Zhu) - Saxon (DE) (by PULZ418) - Bavarian (DE) - Changed: Out of service displays no longer show "CRN" - Changed: If you put a display on another, the properties (including Y/Z offset) of the other display are copied (regardless of where clicked) - Fixed: Crash when simulating the train schedule - Fixed: Blacklist excludes stations that contain only part of the blacklisted text - Fixed: "Out of service" is not translated like other texts on the displays - Fixed: Crash when resizing the window and "Show Me What You Got" is installed - Fixed: Custom language settings in the config are not applied after the game starts [Fabric] - Fixed: Some texts show the translation key (fixed by using a fallback translation) - Fixed: Displays of the same type that are actually not connected, still copy the properties of their neighbors - Fixed: Spelling of some texts in the german language file

- Added: New Half Advanced Display Panel (a thin variant of the small displays) (by slmnio) - Added: New text for displays that are placed on trains and out of service - Added: New languages - Chinese (simplified) (by Mingshuai Zhu) - Saxon (DE) (by PULZ418) - Bavarian (DE) - Changed: Out of service displays no longer show "CRN" - Changed: If you put a display on another, the properties (including Y/Z offset) of the other display are copied (regardless of where clicked) - Fixed: Crash when simulating the train schedule - Fixed: Blacklist excludes stations that contain only part of the blacklisted text - Fixed: "Out of service" is not translated like other texts on the displays - Fixed: Crash when resizing the window and "Show Me What You Got" is installed - Fixed: Custom language settings in the config are not applied after the game starts [Fabric] - Fixed: Some texts show the translation key (fixed by using a fallback translation) - Fixed: Displays of the same type that are actually not connected, still copy the properties of their neighbors - Fixed: Spelling of some texts in the german language file

- Added: New Half Advanced Display Panel (a thin variant of the small displays) (by slmnio) - Added: New text for displays that are placed on trains and out of service - Added: New languages - Chinese (simplified) (by Mingshuai Zhu) - Saxon (DE) (by PULZ418) - Bavarian (DE) - Changed: Out of service displays no longer show "CRN" - Changed: If you put a display on another, the properties (including Y/Z offset) of the other display are copied (regardless of where clicked) - Fixed: Crash when simulating the train schedule - Fixed: Blacklist excludes stations that contain only part of the blacklisted text - Fixed: "Out of service" is not translated like other texts on the displays - Fixed: Crash when resizing the window and "Show Me What You Got" is installed - Fixed: Custom language settings in the config are not applied after the game starts [Fabric] - Fixed: Some texts show the translation key (fixed by using a fallback translation) - Fixed: Displays of the same type that are actually not connected, still copy the properties of their neighbors - Fixed: Spelling of some texts in the german language file

- Added: New Half Advanced Display Panel (a thin variant of the small displays) (by slmnio) - Added: New text for displays that are placed on trains and out of service - Added: New languages - Chinese (simplified) (by Mingshuai Zhu) - Saxon (DE) (by PULZ418) - Bavarian (DE) - Changed: Out of service displays no longer show "CRN" - Changed: If you put a display on another, the properties (including Y/Z offset) of the other display are copied (regardless of where clicked) - Fixed: Crash when simulating the train schedule - Fixed: Blacklist excludes stations that contain only part of the blacklisted text - Fixed: "Out of service" is not translated like other texts on the displays - Fixed: Crash when resizing the window and "Show Me What You Got" is installed - Fixed: Custom language settings in the config are not applied after the game starts [Fabric] - Fixed: Some texts show the translation key (fixed by using a fallback translation) - Fixed: Displays of the same type that are actually not connected, still copy the properties of their neighbors - Fixed: Spelling of some texts in the german language file

- Added: New Half Advanced Display Panel (a thin variant of the small displays) (by slmnio) - Added: New text for displays that are placed on trains and out of service - Added: New languages - Chinese (simplified) (by Mingshuai Zhu) - Saxon (DE) (by PULZ418) - Bavarian (DE) - Changed: Out of service displays no longer show "CRN" - Changed: If you put a display on another, the properties (including Y/Z offset) of the other display are copied (regardless of where clicked) - Fixed: Crash when simulating the train schedule - Fixed: Blacklist excludes stations that contain only part of the blacklisted text - Fixed: "Out of service" is not translated like other texts on the displays - Fixed: Crash when resizing the window and "Show Me What You Got" is installed - Fixed: Custom language settings in the config are not applied after the game starts [Fabric] - Fixed: Some texts show the translation key (fixed by using a fallback translation) - Fixed: Displays of the same type that are actually not connected, still copy the properties of their neighbors - Fixed: Spelling of some texts in the german language file

- Added: New Half Advanced Display Panel (a thin variant of the small displays) (by slmnio) - Added: New text for displays that are placed on trains and out of service - Added: New languages - Chinese (simplified) (by Mingshuai Zhu) - Saxon (DE) (by PULZ418) - Bavarian (DE) - Changed: Out of service displays no longer show "CRN" - Changed: If you put a display on another, the properties (including Y/Z offset) of the other display are copied (regardless of where clicked) - Fixed: Crash when simulating the train schedule - Fixed: Blacklist excludes stations that contain only part of the blacklisted text - Fixed: "Out of service" is not translated like other texts on the displays - Fixed: Crash when resizing the window and "Show Me What You Got" is installed - Fixed: Custom language settings in the config are not applied after the game starts [Fabric] - Fixed: Some texts show the translation key (fixed by using a fallback translation) - Fixed: Displays of the same type that are actually not connected, still copy the properties of their neighbors - Fixed: Spelling of some texts in the german language file

- Fixed: Incorrect placement of the Advanced Display Panel when clicking on the block behind it. - Fixed: Incompatibility with other mods that change Minecraft's language system (e.g. Fast Backups) - Fixed: Rare crashes due to displays trying to query missing data - Fixed: Navigator settings are carried accross worlds/servers - Fixed: Some recipes are not working on fabric ### PLEASE NOTE! CRN beta-0.5.0+ is NOT compatible with TrafficCraft versions prior to v1.0.4. Please also update TrafficCraft.

- Fixed: Incorrect placement of the Advanced Display Panel when clicking on the block behind it. - Fixed: Incompatibility with other mods that change Minecraft's language system (e.g. Fast Backups) - Fixed: Rare crashes due to displays trying to query missing data - Fixed: Navigator settings are carried accross worlds/servers - Fixed: Some recipes are not working on fabric ### PLEASE NOTE! CRN beta-0.5.0+ is NOT compatible with TrafficCraft versions prior to v1.0.4. Please also update TrafficCraft.

- Fixed: Incorrect placement of the Advanced Display Panel when clicking on the block behind it. - Fixed: Incompatibility with other mods that change Minecraft's language system (e.g. Fast Backups) - Fixed: Rare crashes due to displays trying to query missing data - Fixed: Navigator settings are carried accross worlds/servers - Fixed: Some recipes are not working on fabric ### PLEASE NOTE! CRN beta-0.5.0+ is NOT compatible with TrafficCraft versions prior to v1.0.4. Please also update TrafficCraft.

- Fixed: Incorrect placement of the Advanced Display Panel when clicking on the block behind it. - Fixed: Incompatibility with other mods that change Minecraft's language system (e.g. Fast Backups) - Fixed: Rare crashes due to displays trying to query missing data - Fixed: Navigator settings are carried accross worlds/servers - Fixed: Some recipes are not working on fabric ### PLEASE NOTE! CRN beta-0.5.0+ is NOT compatible with TrafficCraft versions prior to v1.0.4. Please also update TrafficCraft.

- Fixed: Incorrect placement of the Advanced Display Panel when clicking on the block behind it. - Fixed: Incompatibility with other mods that change Minecraft's language system (e.g. Fast Backups) - Fixed: Rare crashes due to displays trying to query missing data - Fixed: Navigator settings are carried accross worlds/servers - Fixed: Some recipes are not working on fabric ### PLEASE NOTE! CRN beta-0.5.0+ is NOT compatible with TrafficCraft versions prior to v1.0.4. Please also update TrafficCraft.

- Fixed: Incorrect placement of the Advanced Display Panel when clicking on the block behind it. - Fixed: Incompatibility with other mods that change Minecraft's language system (e.g. Fast Backups) - Fixed: Rare crashes due to displays trying to query missing data - Fixed: Navigator settings are carried accross worlds/servers - Fixed: Some recipes are not working on fabric ### PLEASE NOTE! CRN beta-0.5.0+ is NOT compatible with TrafficCraft versions prior to v1.0.4. Please also update TrafficCraft.

## HOTFIX beta-0.5.1 - Fixed: Crash when right-clicking a clock on a server - Fixed: Crash when leaving the navigator UI on a server - Fixed: Displays disconnect when assembled - Fixed: Time renders out of bounds on a single display with "Passenger Information" and "Informative" setting. - Fixed: Custom language not loading [1.20.1] ## Changes beta-0.5.0 Due to some major changes to the displays, the following problems arise in existing worlds: - All displays will be placed in their default block state. - All displays with back rendering now render at the front. **Please create a backup of your world before updating!** - Now using DragonLib 2 and Architectury API (both included) - Added: The speed unit can now be changed (previously: km/h) - Added: The language of the displays and announcements can now be changed individually. - Added: New placement variants for all displays, depending on where clicked. - Small displays can now be placed in 9 different locations within a block. - Display boards/panels can now be placed in 3 different locations within a block. - Added: Sloped display - Automatically rendered on both sides which cannot be changed. - Added: Option in the display link to change time display between clock time and time until departure (like Create's display boards). - Added: Train Station Clock can now be colored and made to glow. - Added: Dutch translation (by TheSatanicFlame) - Added: Polish translation (by Slasherss) - Changed: CTRL key is now always required to open the overlay settings screen. - Changed: Spacing of 4 block pixels between train name and train destination on displays with "Platform Display" and "Informative" setting. - Changed: The automatic column width value in Display Links is now displayed as "Auto" instead of "-1". - Changed the name of Advanced Display Boards. - Changed: Fences, walls and similar blocks can now connect to Advanced Display Boards - Fixed: Random "ConcurrentModificationException" crashes. - Fixed: Low framerate while scrolling in all UIs - Fixed: Time shows 60 minutes (e.g. 11:60) - Fixed: 32-bit integer overflow causes negative times every 178958 days, starting after 89479 days - Fixed: The platform is not shown on displays with "Platform Display" and "Simple" setting. - Fixed: Displays always show "Out of service" after being loaded. - Fixed: Rare crash while simulating a train's schedule. - Fixed: Displays with "Passenger Information" and "Informative" setting tend to render the content out of bounds. - Fixed: If a track station contained in a station tag is blacklisted, the entire tag will be blacklisted. - Fixed: Routes that contains station tags that are blacklisted, even though the affected track stations are available, cannot be found. - Removed: Back side rendering

## HOTFIX beta-0.5.1 - Fixed: Crash when right-clicking a clock on a server - Fixed: Crash when leaving the navigator UI on a server - Fixed: Displays disconnect when assembled - Fixed: Time renders out of bounds on a single display with "Passenger Information" and "Informative" setting. - Fixed: Custom language not loading [1.20.1] ## Changes beta-0.5.0 Due to some major changes to the displays, the following problems arise in existing worlds: - All displays will be placed in their default block state. - All displays with back rendering now render at the front. **Please create a backup of your world before updating!** - Now using DragonLib 2 and Architectury API (both included) - Added: The speed unit can now be changed (previously: km/h) - Added: The language of the displays and announcements can now be changed individually. - Added: New placement variants for all displays, depending on where clicked. - Small displays can now be placed in 9 different locations within a block. - Display boards/panels can now be placed in 3 different locations within a block. - Added: Sloped display - Automatically rendered on both sides which cannot be changed. - Added: Option in the display link to change time display between clock time and time until departure (like Create's display boards). - Added: Train Station Clock can now be colored and made to glow. - Added: Dutch translation (by TheSatanicFlame) - Added: Polish translation (by Slasherss) - Changed: CTRL key is now always required to open the overlay settings screen. - Changed: Spacing of 4 block pixels between train name and train destination on displays with "Platform Display" and "Informative" setting. - Changed: The automatic column width value in Display Links is now displayed as "Auto" instead of "-1". - Changed the name of Advanced Display Boards. - Changed: Fences, walls and similar blocks can now connect to Advanced Display Boards - Fixed: Random "ConcurrentModificationException" crashes. - Fixed: Low framerate while scrolling in all UIs - Fixed: Time shows 60 minutes (e.g. 11:60) - Fixed: 32-bit integer overflow causes negative times every 178958 days, starting after 89479 days - Fixed: The platform is not shown on displays with "Platform Display" and "Simple" setting. - Fixed: Displays always show "Out of service" after being loaded. - Fixed: Rare crash while simulating a train's schedule. - Fixed: Displays with "Passenger Information" and "Informative" setting tend to render the content out of bounds. - Fixed: If a track station contained in a station tag is blacklisted, the entire tag will be blacklisted. - Fixed: Routes that contains station tags that are blacklisted, even though the affected track stations are available, cannot be found. - Removed: Back side rendering

## HOTFIX beta-0.5.1 - Fixed: Crash when right-clicking a clock on a server - Fixed: Crash when leaving the navigator UI on a server - Fixed: Displays disconnect when assembled - Fixed: Time renders out of bounds on a single display with "Passenger Information" and "Informative" setting. - Fixed: Custom language not loading [1.20.1] ## Changes beta-0.5.0 Due to some major changes to the displays, the following problems arise in existing worlds: - All displays will be placed in their default block state. - All displays with back rendering now render at the front. **Please create a backup of your world before updating!** - Now using DragonLib 2 and Architectury API (both included) - Added: The speed unit can now be changed (previously: km/h) - Added: The language of the displays and announcements can now be changed individually. - Added: New placement variants for all displays, depending on where clicked. - Small displays can now be placed in 9 different locations within a block. - Display boards/panels can now be placed in 3 different locations within a block. - Added: Sloped display - Automatically rendered on both sides which cannot be changed. - Added: Option in the display link to change time display between clock time and time until departure (like Create's display boards). - Added: Train Station Clock can now be colored and made to glow. - Added: Dutch translation (by TheSatanicFlame) - Added: Polish translation (by Slasherss) - Changed: CTRL key is now always required to open the overlay settings screen. - Changed: Spacing of 4 block pixels between train name and train destination on displays with "Platform Display" and "Informative" setting. - Changed: The automatic column width value in Display Links is now displayed as "Auto" instead of "-1". - Changed the name of Advanced Display Boards. - Changed: Fences, walls and similar blocks can now connect to Advanced Display Boards - Fixed: Random "ConcurrentModificationException" crashes. - Fixed: Low framerate while scrolling in all UIs - Fixed: Time shows 60 minutes (e.g. 11:60) - Fixed: 32-bit integer overflow causes negative times every 178958 days, starting after 89479 days - Fixed: The platform is not shown on displays with "Platform Display" and "Simple" setting. - Fixed: Displays always show "Out of service" after being loaded. - Fixed: Rare crash while simulating a train's schedule. - Fixed: Displays with "Passenger Information" and "Informative" setting tend to render the content out of bounds. - Fixed: If a track station contained in a station tag is blacklisted, the entire tag will be blacklisted. - Fixed: Routes that contains station tags that are blacklisted, even though the affected track stations are available, cannot be found. - Removed: Back side rendering

## HOTFIX beta-0.5.1 - Fixed: Crash when right-clicking a clock on a server - Fixed: Crash when leaving the navigator UI on a server - Fixed: Displays disconnect when assembled - Fixed: Time renders out of bounds on a single display with "Passenger Information" and "Informative" setting. - Fixed: Custom language not loading [1.20.1] ## Changes beta-0.5.0 Due to some major changes to the displays, the following problems arise in existing worlds: - All displays will be placed in their default block state. - All displays with back rendering now render at the front. **Please create a backup of your world before updating!** - Now using DragonLib 2 and Architectury API (both included) - Added: The speed unit can now be changed (previously: km/h) - Added: The language of the displays and announcements can now be changed individually. - Added: New placement variants for all displays, depending on where clicked. - Small displays can now be placed in 9 different locations within a block. - Display boards/panels can now be placed in 3 different locations within a block. - Added: Sloped display - Automatically rendered on both sides which cannot be changed. - Added: Option in the display link to change time display between clock time and time until departure (like Create's display boards). - Added: Train Station Clock can now be colored and made to glow. - Added: Dutch translation (by TheSatanicFlame) - Added: Polish translation (by Slasherss) - Changed: CTRL key is now always required to open the overlay settings screen. - Changed: Spacing of 4 block pixels between train name and train destination on displays with "Platform Display" and "Informative" setting. - Changed: The automatic column width value in Display Links is now displayed as "Auto" instead of "-1". - Changed the name of Advanced Display Boards. - Changed: Fences, walls and similar blocks can now connect to Advanced Display Boards - Fixed: Random "ConcurrentModificationException" crashes. - Fixed: Low framerate while scrolling in all UIs - Fixed: Time shows 60 minutes (e.g. 11:60) - Fixed: 32-bit integer overflow causes negative times every 178958 days, starting after 89479 days - Fixed: The platform is not shown on displays with "Platform Display" and "Simple" setting. - Fixed: Displays always show "Out of service" after being loaded. - Fixed: Rare crash while simulating a train's schedule. - Fixed: Displays with "Passenger Information" and "Informative" setting tend to render the content out of bounds. - Fixed: If a track station contained in a station tag is blacklisted, the entire tag will be blacklisted. - Fixed: Routes that contains station tags that are blacklisted, even though the affected track stations are available, cannot be found. - Removed: Back side rendering

## HOTFIX beta-0.5.1 - Fixed: Crash when right-clicking a clock on a server - Fixed: Crash when leaving the navigator UI on a server - Fixed: Displays disconnect when assembled - Fixed: Time renders out of bounds on a single display with "Passenger Information" and "Informative" setting. - Fixed: Custom language not loading [1.20.1] ## Changes beta-0.5.0 Due to some major changes to the displays, the following problems arise in existing worlds: - All displays will be placed in their default block state. - All displays with back rendering now render at the front. **Please create a backup of your world before updating!** - Now using DragonLib 2 and Architectury API (both included) - Added: The speed unit can now be changed (previously: km/h) - Added: The language of the displays and announcements can now be changed individually. - Added: New placement variants for all displays, depending on where clicked. - Small displays can now be placed in 9 different locations within a block. - Display boards/panels can now be placed in 3 different locations within a block. - Added: Sloped display - Automatically rendered on both sides which cannot be changed. - Added: Option in the display link to change time display between clock time and time until departure (like Create's display boards). - Added: Train Station Clock can now be colored and made to glow. - Added: Dutch translation (by TheSatanicFlame) - Added: Polish translation (by Slasherss) - Changed: CTRL key is now always required to open the overlay settings screen. - Changed: Spacing of 4 block pixels between train name and train destination on displays with "Platform Display" and "Informative" setting. - Changed: The automatic column width value in Display Links is now displayed as "Auto" instead of "-1". - Changed the name of Advanced Display Boards. - Changed: Fences, walls and similar blocks can now connect to Advanced Display Boards - Fixed: Random "ConcurrentModificationException" crashes. - Fixed: Low framerate while scrolling in all UIs - Fixed: Time shows 60 minutes (e.g. 11:60) - Fixed: 32-bit integer overflow causes negative times every 178958 days, starting after 89479 days - Fixed: The platform is not shown on displays with "Platform Display" and "Simple" setting. - Fixed: Displays always show "Out of service" after being loaded. - Fixed: Rare crash while simulating a train's schedule. - Fixed: Displays with "Passenger Information" and "Informative" setting tend to render the content out of bounds. - Fixed: If a track station contained in a station tag is blacklisted, the entire tag will be blacklisted. - Fixed: Routes that contains station tags that are blacklisted, even though the affected track stations are available, cannot be found. - Removed: Back side rendering

## HOTFIX beta-0.5.1 - Fixed: Crash when right-clicking a clock on a server - Fixed: Crash when leaving the navigator UI on a server - Fixed: Displays disconnect when assembled - Fixed: Time renders out of bounds on a single display with "Passenger Information" and "Informative" setting. - Fixed: Custom language not loading [1.20.1] ## Changes beta-0.5.0 Due to some major changes to the displays, the following problems arise in existing worlds: - All displays will be placed in their default block state. - All displays with back rendering now render at the front. **Please create a backup of your world before updating!** - Now using DragonLib 2 and Architectury API (both included) - Added: The speed unit can now be changed (previously: km/h) - Added: The language of the displays and announcements can now be changed individually. - Added: New placement variants for all displays, depending on where clicked. - Small displays can now be placed in 9 different locations within a block. - Display boards/panels can now be placed in 3 different locations within a block. - Added: Sloped display - Automatically rendered on both sides which cannot be changed. - Added: Option in the display link to change time display between clock time and time until departure (like Create's display boards). - Added: Train Station Clock can now be colored and made to glow. - Added: Dutch translation (by TheSatanicFlame) - Added: Polish translation (by Slasherss) - Changed: CTRL key is now always required to open the overlay settings screen. - Changed: Spacing of 4 block pixels between train name and train destination on displays with "Platform Display" and "Informative" setting. - Changed: The automatic column width value in Display Links is now displayed as "Auto" instead of "-1". - Changed the name of Advanced Display Boards. - Changed: Fences, walls and similar blocks can now connect to Advanced Display Boards - Fixed: Random "ConcurrentModificationException" crashes. - Fixed: Low framerate while scrolling in all UIs - Fixed: Time shows 60 minutes (e.g. 11:60) - Fixed: 32-bit integer overflow causes negative times every 178958 days, starting after 89479 days - Fixed: The platform is not shown on displays with "Platform Display" and "Simple" setting. - Fixed: Displays always show "Out of service" after being loaded. - Fixed: Rare crash while simulating a train's schedule. - Fixed: Displays with "Passenger Information" and "Informative" setting tend to render the content out of bounds. - Fixed: If a track station contained in a station tag is blacklisted, the entire tag will be blacklisted. - Fixed: Routes that contains station tags that are blacklisted, even though the affected track stations are available, cannot be found. - Removed: Back side rendering

- Fixed: Crash when trying to disassemble a train with automatic schedule. - Fixed: The color is not applied correctly to some display types. - Fixed: Some display types show the wrong daytime. - Fixed: Rare crash when the train station of a display link cannot be found. - Fixed: Platform text is shown on Displays even there is no platform defined.

- Fixed: Crash when trying to disassemble a train with automatic schedule. - Fixed: The color is not applied correctly to some display types. - Fixed: Some display types show the wrong daytime. - Fixed: Rare crash when the train station of a display link cannot be found. - Fixed: Platform text is shown on Displays even there is no platform defined.

- Fixed: Crash when trying to disassemble a train with automatic schedule. - Fixed: The color is not applied correctly to some display types. - Fixed: Some display types show the wrong daytime. - Fixed: Rare crash when the train station of a display link cannot be found. - Fixed: Platform text is shown on Displays even there is no platform defined.

- Added advanced displays - 4 different variants: full block, board, panel, small (like copycat step) - Don't require kinetic energy - Can be used ... - ... outside on trains as train destination displays. - ... inside trains as passenger information displays. - ... on train stations as platform displays. - Configure the displays to render the content on the front, back or on both sides. - Decide how much information should be displayed and choose between simple, detailed and informative. - Displays can be up to 16 blocks wide - Depending on the display type, the displays can also be 16 blocks high. Small displays always have a fixed height of 1 block. - Can be colored using dye. You can assign every RGB color using commands. - Use glow ink to let the displays glow in the dark. - Platform displays must be linked with a display link to a train station. - Added train station clock - Displays the time analogue with clock hands. - Right-Click to see the digital time in your actionbar. - Can only be mined when using silk touch. Otherwise it only drops at 50%. - Added new item descriptions when holding SHIFT. - Added new display link source type: Advanced Display. - Added new block/item tag for advanced displays. - Added new advancement. - Changed: Displays can show the exit direction on a train. - Fixed: Rare crash caused by division with 0. - Fixed: The scroll input box in the search settings screen does not play sounds. - Probably fixed rare crash when editing global settings. (Could not be tested, as the bug couldn't be reproduced) Although the displays are finished in their current state, there are still some features planned for future updates! ### Known issues (please do not report!) - The time sometimes shows 60 minutes. This requires an update of DragonLib, which is currently being reworked. - Navigator doesn't find train connections when there are waypoints from Steam'n'Rails. This bug is related to the problem that Create's display boards also don't show trains that have waypoints. There is currently no solution.

- Added advanced displays - 4 different variants: full block, board, panel, small (like copycat step) - Don't require kinetic energy - Can be used ... - ... outside on trains as train destination displays. - ... inside trains as passenger information displays. - ... on train stations as platform displays. - Configure the displays to render the content on the front, back or on both sides. - Decide how much information should be displayed and choose between simple, detailed and informative. - Displays can be up to 16 blocks wide - Depending on the display type, the displays can also be 16 blocks high. Small displays always have a fixed height of 1 block. - Can be colored using dye. You can assign every RGB color using commands. - Use glow ink to let the displays glow in the dark. - Platform displays must be linked with a display link to a train station. - Added train station clock - Displays the time analogue with clock hands. - Right-Click to see the digital time in your actionbar. - Can only be mined when using silk touch. Otherwise it only drops at 50%. - Added new item descriptions when holding SHIFT. - Added new display link source type: Advanced Display. - Added new block/item tag for advanced displays. - Added new advancement. - Changed: Displays can show the exit direction on a train. - Fixed: Rare crash caused by division with 0. - Fixed: The scroll input box in the search settings screen does not play sounds. - Probably fixed rare crash when editing global settings. (Could not be tested, as the bug couldn't be reproduced) Although the displays are finished in their current state, there are still some features planned for future updates! ### Known issues (please do not report!) - The time sometimes shows 60 minutes. This requires an update of DragonLib, which is currently being reworked. - Navigator doesn't find train connections when there are waypoints from Steam'n'Rails. This bug is related to the problem that Create's display boards also don't show trains that have waypoints. There is currently no solution.

- Added advanced displays - 4 different variants: full block, board, panel, small (like copycat step) - Don't require kinetic energy - Can be used ... - ... outside on trains as train destination displays. - ... inside trains as passenger information displays. - ... on train stations as platform displays. - Configure the displays to render the content on the front, back or on both sides. - Decide how much information should be displayed and choose between simple, detailed and informative. - Displays can be up to 16 blocks wide - Depending on the display type, the displays can also be 16 blocks high. Small displays always have a fixed height of 1 block. - Can be colored using dye. You can assign every RGB color using commands. - Use glow ink to let the displays glow in the dark. - Platform displays must be linked with a display link to a train station. - Added train station clock - Displays the time analogue with clock hands. - Right-Click to see the digital time in your actionbar. - Can only be mined when using silk touch. Otherwise it only drops at 50%. - Added new item descriptions when holding SHIFT. - Added new display link source type: Advanced Display. - Added new block/item tag for advanced displays. - Added new advancement. - Changed: Displays can show the exit direction on a train. - Fixed: Rare crash caused by division with 0. - Fixed: The scroll input box in the search settings screen does not play sounds. - Probably fixed rare crash when editing global settings. (Could not be tested, as the bug couldn't be reproduced) Although the displays are finished in their current state, there are still some features planned for future updates! ### Known issues (please do not report!) - The time sometimes shows 60 minutes. This requires an update of DragonLib, which is currently being reworked. - Navigator doesn't find train connections when there are waypoints from Steam'n'Rails. This bug is related to the problem that Create's display boards also don't show trains that have waypoints. There is currently no solution.

- Fixed: Route overlay shows wrong station when journey is finished or interrupted. - Fixed: The next connections page in the route overlay shows the wrong platform data. - Fixed: In some cases no route is searched to the desired final station. - Fixed: The next connections page in the route overlay shows excluded trains. - Fixed: Updating the platform in the global settings does not update the last edited timestamp info. - Fixed: The last edited timestamp is not updated in the train groups settings. - Fixed: Changing the time (e.g. by sleeping) confuses the navigator, resulting in incorrect time information. - Added: Own creative mode tab. (Fixes: The navigator cannot be found in any of the creative mode tabs) - Added: Narrator announcement on journey start and when missing a connecting train. - Ported to 1.19.2 and 1.20.1

- Fixed: Route overlay shows wrong station when journey is finished or interrupted. - Fixed: The next connections page in the route overlay shows the wrong platform data. - Fixed: In some cases no route is searched to the desired final station. - Fixed: The next connections page in the route overlay shows excluded trains. - Fixed: Updating the platform in the global settings does not update the last edited timestamp info. - Fixed: The last edited timestamp is not updated in the train groups settings. - Fixed: Changing the time (e.g. by sleeping) confuses the navigator, resulting in incorrect time information. - Added: Own creative mode tab. (Fixes: The navigator cannot be found in any of the creative mode tabs) - Added: Narrator announcement on journey start and when missing a connecting train. - Ported to 1.19.2 and 1.20.1

- Fixed: Route overlay shows wrong station when journey is finished or interrupted. - Fixed: The next connections page in the route overlay shows the wrong platform data. - Fixed: In some cases no route is searched to the desired final station. - Fixed: The next connections page in the route overlay shows excluded trains. - Fixed: Updating the platform in the global settings does not update the last edited timestamp info. - Fixed: The last edited timestamp is not updated in the train groups settings. - Fixed: Changing the time (e.g. by sleeping) confuses the navigator, resulting in incorrect time information. - Added: Own creative mode tab. (Fixes: The navigator cannot be found in any of the creative mode tabs) - Added: Narrator announcement on journey start and when missing a connecting train. - Ported to 1.19.2 and 1.20.1

This update is a complete overhaul of the entire mod with many new features and bug fixes. Here is a short list of the changes: - Added: Route overlay. The route overlay shows advanced details of a selected route on your HUD with a lot of useful information, e.g. transfers, delays and much more. - Added: Real-time data for all trains. - Added: A platform name can now be stored for each station in the station tag settings. - Added: Train Group settings to group different trains (e.g. subway, regional rail services, ...) - Added: Train Blacklist. Exclude trains you don't want to have in your suggestions. - Added: Option to define a minimum transfer time. - Added: Search boxes in all settings menus. - Changes: New navigation system which works much faster and more accurately. - Changed: Renamed Train Station Alias to Train Station Tags - General performance improvements, optimizations and more - Now using DragonLib. (This library is embedded into the jar file) ### Bug Fixes Due to the massive changes to the entire mod, many known bugs have been fixed, but new ones may also have arisen.

- Initial Release