ВЕРСИИ (30)

Bug fixes: - Fixed a bug in version 1.21.1 where high-conduction ports did not work with FE/RF if brandoncore was installed (draconic library), but only worked with components based on OP energy (standard draconic) - Fixed a bug where the turbine was not working again.

Bug fixes: - Fixed a bug in version 1.21.1 where high-conduction ports did not work with FE/RF if brandoncore was installed (draconic library), but only worked with components based on OP energy (standard draconic) - Fixed a bug where the turbine was not working again.

Requires Iskandert's Library 1.8.0.0.0+ Bug Fixes: - Only 26.1.2: fixed a bug where resource ports would occasionally cause crashes with pipes (tested with Pipez, but it probably caused the same problem with other mods as well). - Updated Neoforge version now require: 26.1.2.73+. - The builder’s preview area, which has now been improved, responds to changes. - Resource Heating Coil: fixed a bug where it displayed coal/charcoal instead of all burnable items in the JEI; reference recipe: water + burnable items. Tweaks: - The tooltip for the ‘hide/preview’ button within the builders has been updated.

Requires Iskandert's Library 1.8.0.0.0+ Bug Fixes: - Only 26.1.2: fixed a bug where resource ports would occasionally cause crashes with pipes (tested with Pipez, but it probably caused the same problem with other mods as well). - The builder’s preview area, which has now been improved, responds to changes. - Resource Heating Coil: fixed a bug where it displayed coal/charcoal instead of all burnable items in the JEI; reference recipe: water + burnable items. Tweaks: - The tooltip for the ‘hide/preview’ button within the builders has been updated.

Requires Iskandert's Library 1.8.0.0.0+ Bug Fixes: - Resolved potential server issues. Tweaks: - The resource portal GUI has been updated Feathures: - Improved GuideME, added a ‘Getting Started’ section for Turbine and Reactor - Added integration of the heating coil with the steam from the Mekanism. - Added a rendering of gas inside the heating coils.

Requires Iskandert's Library 1.8.0.0.0+ Bug Fixes: - Resolved potential server issues. - Fixed Crash on Startup Tweaks: - The resource portal GUI has been updated Feathures: - Improved GuideME, added a ‘Getting Started’ section for Turbine and Reactor - Added integration of the heating coil with the steam from the Mekanism. - Added a rendering of gas inside the heating coils.

Requires Iskandert's Library 1.8.0.0.0+ Bug Fixes: * Fixed a bug where the Hight Conduction Power Ports were not send the correct amount of energy when connected to a Draconic battery. Tweaks: * The resource ports for gases and liquids have been set to ‘long’ to allow for greater I/O. Feathures: * The Power Ports now scale according to how much energy is produced by the turbine and reactor. Removed: * Ports config section is now hard-coded.

Requires Iskandert's Library 1.8.0.0.0+ Bug Fixes: * Fixed a bug where the Hight Conduction Power Ports were not send the correct amount of energy when connected to a Draconic battery. Tweaks: * The resource ports for gases and liquids have been set to ‘long’ to allow for greater I/O. Feathures: * The Power Ports now scale according to how much energy is produced by the turbine and reactor. Removed: * Ports config section is now hard-coded.

Requires Iskandert's Utilities 1.8.0.0.0+ Bugfixes: - Fixed a bug where reactors would not work without coolants. - Fixed a crash that occurred when Brandon's Core was missing. Tweaks: - Validation has been improved: turbines and reactors with multiple redstone ports will no longer be valid.

Requires Iskandert's Utilities 1.8.0.0.0+ Bugfixes: - Fixed a bug where reactors would not work without coolants. - Fixed a crash that occurred when Brandon's Core was missing. Tweaks: - Validation has been improved: turbines and reactors with multiple redstone ports will no longer be valid.

Tweaks: - Extended scalar configuration parameter Bug fixes: - Fixed an error in the client-server connection. - Removed the “dump” button from the radiation scrubber. - Improved the scrubber GUI and completed the module slots. - Improved the identification logic and management of reactor ports.

Requires Iskandert's Utilities 1.4.0.0.0+ Tweaks: - Extended scalar configuration parameter Bug fixes: - Fixed an error in the client-server connection. - Removed the “dump” button from the radiation scrubber. - Improved the scrubber GUI and completed the module slots. - Improved the identification logic and management of reactor ports.

Now requires Iskandert's Library 1.4.0.0.1+ Bug fixes: - Removed a temporary debug from the default datapacks - Changed the output of the fissile fuel processing from spent nuclear waste to standard nuclear waste. - The turbine port in the GUI no longer has a solid part - The reactor no longer consumes resources when it shouldn’t - Fixed coolant that was no longer working correctly - Fixed rendering of the area where builders will construct; it is now well synchronised between the controls and reality, and builders no longer hide each other’s renders. - Fixed incorrect turbine blade count in the builder simulator; it now calculates and displays the blades correctly. - Fixed missing turbine rendering Tweaks: - Default steam processing quantity increased from 250 to 1000 per blade - Modified ports, as specified in features. Features: - Added more electromagnetic coils - Reactor ports: added a button to clearly distinguish whether the port is for fuel/waste or coolant - Made reactor and turbine ports adaptive based on their consumption; this feature may not be applied immediately to the ports as it may require revalidation of the reactor/turbine; clicking the reboot button in the control panel initiates a manual validation or you can wait for the periodic one.

Bug fixes: - Fixed a bug with gases where buckets were not recognised as containing liquids in certain contexts. - Changed the output of the fissile fuel processing from spent nuclear waste to standard nuclear waste. - The turbine port in the GUI no longer has a solid part. - The reactor no longer consumes fuel when it shouldn’t. - Fixed an issue where the coolant was no longer functioning correctly. - Fixed rendering of the area where builders will construct; it is now well synchronised between the interface and reality, and builders no longer hide each other’s renders. - Fixed incorrect counting in the builder simulator for turbines; it now calculates and displays the blades correctly. - Dump button disabled for radioactive gases in ports Tweaks: - Default steam processing quantity increased from 250 to 1000 per blade - Ports modified; see Features for details. Features: - Added more electromagnetic coils - Reactor ports: added a button to clearly distinguish whether the port is for fuel/waste or coolant - Reactor and turbine ports now adapt based on their consumption; this feature may not be applied immediately to the ports as it may require the reactor/turbine to be revalidated; clicking the reboot button in the control panel initiates a manual validation or you can wait for the periodic one. - Ports containing radioactive gas now emit radiation upon rupture.

# Turbine Update ## **Some features, such as the turbine, are working properly but may require some tweaks; please let me know..** ## **Removed mandatory dependency of Iskandert's Utilities** Tweaks: - Power Port reduced to an integer value buffer & transmission, but a High Conductivity Port has been added. - Reduced the default capacity of Rods from 10,000 to 1,000; it was really too large. - Expanded and improved some datpacks. Integrations: - Added various coolants, heat sinks and fuels to the reactor. - Changed Ender Goo tag to allow for greater compatibility from c:ender to c:ender_molten. - Added integration for ores with Mekansim Features: - Added Turbine and related components. - High Conductivity Port, Long Value Buffer & Transmission with direct integration with Draconic Evolution. - The power factor of fuels is now displayed in JEI. - Added Chromium Ore Balancing: - Made ores less rare Bug Fixes: - GuideME was not loading. - Redstone Heating Coils & Melter buttons now have the back function on the right button. - Reactor Builder: no longer shows 100% complete if it lacks sufficient liquids; it now waits for liquids. - Fixed some text that was too long and overflowed the JEI GUI. - Fixed rendering misalignment by a few pixels for liquid slots and items in some GUIs. - Fixed compressed rendering at the bottom for liquids. - Fixed an issue where GuideME would not load in certain contexts. - Fixed failed loading of startup datapacks. - Added automatic exclusion of invalid entries in datapacks. - Fixed minor bugs in some GUIs.

# Turbine Update ## **Requires Iskandert's Library 1.4.0.0.0+** ## **Some features, such as the turbine, are working properly but may require some tweaks; please let me know..** Tweaks: - Power Port reduced to an integer value buffer & transmission, but high conductivity has been added. - Default capacity of Rods reduced from 10,000 to 1,000; it was really too high. - Some datpacks have been expanded and improved. Integrations: - Added new heat sinks. - Changed Ender Goo tag to allow for greater compatibility from c:ender to c:ender_molten. - Added integration for ores with Mekansim Features: - Added Turbine and related components. - High Conductivity Port, Long value buffer & Transmission. - The power factor of fuels is now displayed in JEI. - Added Chromium Ore Balancing: - Made ores less rare Bug Fixes: - Redstone Heating Coils & Melter keys now have the back function on the right key. - Reactor Builder: no longer shows 100% complete if it lacks sufficient liquids; it now waits for liquids. - Fixed some text that was too long and overflowed the JEI GUI. - Fixed rendering of liquid slots and items being misaligned by a few pixels in some GUIs. - Fixed compressed rendering at the bottom for liquids. - Fixed an issue where GuideME would not load in certain contexts. - Fixed failed loading for datapacks at startup. - Added automatic exclusion of invalid entries in datapacks. - Fixed minor bugs in some GUIs.

New Recipes

New Recipes

Now uses Long value for energy otuput and production of reactor.

Now uses Long value for energy otuput and production of reactor.

Added GuideME player documentation Overheating Bugfix.

Added GuideME player documentation Overheating Bugfix.

Tweaks: - The default settings for the heatsinks and fuels have been changed. - Revised reactor algorithm (energy consumption and production have changed). Bugfixes: - Fixed extreme lag on large reactors through caching and controller-based architecture - Reactor Builder now supports item input via hoppers and pipes - Fixed simulation inconsistencies (rod adjacency penalties, bounds handling) - Heatsinks are now just as effective for large reactors. Feathures: - Reactors can now be filled with fuel and coolant while turned off - Added fuel capacity and fill percentage display in GUI. - Added coolant capacity display in both controller GUI and simulation view. - Reactor Builder now build a bit faster (configurable). - Building Percent on Reactor Builder. - Added mark input support to Reactor Builder. - Added dump button for fluid buffers. - Fixed Reactor Builder size.

Tweaks: - The default settings for the heatsinks and fuels have been changed. - Revised reactor algorithm (energy consumption and production have changed). Bugfixes: - Fixed extreme lag on large reactors through caching and controller-based architecture - Reactor Builder now supports item input via hoppers and pipes - Fixed simulation inconsistencies (rod adjacency penalties, bounds handling) - Heatsinks are now just as effective for large reactors. Feathures: - Reactors can now be filled with fuel and coolant while turned off - Added fuel capacity and fill percentage display in GUI. - Added coolant capacity display in both controller GUI and simulation view. - Reactor Builder now build a bit faster (configurable). - Building Percent on Reactor Builder. - Added mark input support to Reactor Builder. - Added dump button for fluid buffers. - Fixed Reactor Builder size.

26.1.2 Porting. Now uses Iskandert's Library. The textures on the blocks aren’t connecting because Fusion hasn’t been updated yet; if it isn’t updated soon and I have the time, I’ll implement a texture connection feature in Iskandert’s Library.

Resource Heating Coils now support by default insert from all sides. Added parameter in datapack of Heating Coils all_sides (default false).

I hope not to release any more versions, at least for today. - Improved JEI visualization for heating coils, now inputs are correctly filtered. - Fix Edeorum Compat for Resource Heating Coil,

Heating Coils recipe fix, now aren't swapped among themselves.

- Added Melter's Heating Element in JEI. - Added ExDeorum Integration for Heating Coils, - Fix Some Recipes. - Improved Config for dev now can be disabled oregen. If enabled from config. Reactors can be integrated with Mekanism for radiation (already implemented previously). - Added (hidden by default) Radiation Scrubber and Radiation Cure.

The dependency fix in the development phase did not give it to me.